Note that r30455 is wrong, that commit does not in fact change the
default behavior as claimed in the commit message. It only breaks
"-af-adv force=0", which was already pretty much useless though.
Change the vo_control(vo, VOCTRL_RESET, NULL) call done when the vf_vo
filter is uninited to vo_seek_reset(vo). The latter also sets
vo->frame_loaded to false.
Remove the vo->config_ok check from vo_seek_reset(). The reset call
should be doable even if config failed.
Add a property to select YUV colorspace. Currently implemented only in
vo_vdpau and vo_xv. Allows switching between BT.601, BT.709 and
SMPTE-240M (vdpau only).
The xv support uses the "XV_ITURBT_709" attribute. At least my NVIDIA
card supports that; I don't know whether other xv implementations do.
Bind the colorspace switch to the 'c' key by default. 'c' is currently
used by vo_sdl for some fullscreen mode change thing, but at the moment
that does not conflict and if it will in the future then vo_sdl can
change.
VDPAU part based on a patch from Lauri Mylläri <lauri.myllari@gmail.com>
The way vo_vdpau kept references to vf mpi objects was unsafe; with
fixed-vo enabled the vf object could be destroyed and a new one
created, but vo_vdpau would still keep the now stale references and
modify memory through them to adjust usage counts. Send a VOCTRL_RESET
from vf_vo uninit() to allow vo_vdpau to erase such references.
Add interfaces to allow VO drivers to add or remove frames from the
video stream and to alter timestamps. Currently this functionality
only works with in correct-pts mode. Use the new functionality in
vo_vdpau to properly support frame-adding deinterlace modes.
Frames added by the VDPAU deinterlacing code are now properly timed.
Before every second frame was always shown immediately (probably next
monitor refresh) after the previous one, even if you were watching
things in slow motion, and framestepping didn't stop at them at all.
When seeking the deinterlace algorithm is no longer fed a mix of
frames from old and new positions.
As a side effect of the changes a problem with resize events was also
fixed. Resizing calls video_to_output_surface() to render the frame at
the new resolution, but before this function also changed the list of
history frames, so resizing could give an image different from the
original one, and also corrupt next frames due to them seeing the
wrong history. Now the function has no such side effects. There are
more resize-related problems though that will be fixed in a later
commit.
The deint_mpi[] list of reserved frames is increased from 2 to 3
entries for reasons related to the above. Having 2 entries is enough
when you initially get a new frame in draw_image() because then you'll
have those two entries plus the new one for a total of 3 (the code
relied on the oldest mpi implicitly staying reserved for the duration
of the call even after usage count was decreased). However if you want
to be able to reproduce the rendering outside draw_image(), relying on
the explicitly reserved list only, then it needs to store 3 entries.
YV12 - since VDPAU only has functions to upload the full frame at once
there is no sense in supporting draw_slice for that.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@28646 b3059339-0415-0410-9bf9-f77b7e298cf2
When OSD contents change while paused, try to change the OSD drawn in
the currently visible frame. If such OSD updates are not supported
then advance by one frame and draw the OSD normally. Add some support
for OSD redrawing to vo xv.
The new xv code makes a copy of the original frame contents before
drawing the OSD if MPlayer is already paused when the frame is drawn.
If such a copy of the current frame exists then the frame contents can
be restored and a different OSD drawn on top of the same frame.
Replace all USE_ prefixes by CONFIG_ prefixes to indicate
options which are configurable.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@27373 b3059339-0415-0410-9bf9-f77b7e298cf2
This commit creates the struct and passes it to some functions that
needs to access OSD state but does not yet move much data from globals
to it.
vf_expand accesses the OSD state for rendering purposes outside of the
normal OSD draw time. The way this currently works is suboptimal, but
I did not attempt to clean it up now. To keep things working the same
way vf_expand needs to know the address of the state object to be able
to access the data even in the functions that should normally not need
it. For that purpose this commit adds a VFCTRL to tell vf_expand the
address of the object.
Remove the global and Add a corresponding field to the vo struct, plus
another which tells whether the LAST config call was successful.The
latter value which tells whether the VO should be properly configured
at the moment seems a better match for the semantics actually needed
in most places where the old value was used. The 'count' field with
the old semantics is not currently used by anything, but I'm leaving
it there for vo drivers which would need those semantics if converted
to use the struct.
Existing uses of the global outside old vo drivers are either converted
to use the struct field or moved inside the vo_xyz() calls (instead of
"if (vo_config_count) vo_flip_page(..." just call vo_flip_page which
will now do nothing if not configured). The removal of the check in
mpcommon.c/update_subtitles() is less trivial than the others, but I
think it shouldn't cause problems.
Create new video driver API that has a per-instance context structure
and does not rely on keeping status in global or static variables.
Existing drivers are not yet converted to this API; instead there is a
wrapper which translates calls to them.
In the new API, an old API call vo_functions->xyz(args) is generally
replaced by vo_xyz(vo_instance, args).
The changes to keep the vesa, dxr2 and xover drivers compiling have
not been tested.
These were the only voctrl types with more than one argument. The
second argument was passed using variable arguments. Change them to
use a single argument (address of a struct containing both old
arguments). This makes forwarding the arguments to other functions
easier and allows simplifying code.
If it is set, renderer is reconfigured before the next frame.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@25841 b3059339-0415-0410-9bf9-f77b7e298cf2
It is possible to separately configure hinting for scaled and unscaled osd.
The default is native hinter for unscaled osd (only vo_gl at this point),
no hinting for vf_ass.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@23152 b3059339-0415-0410-9bf9-f77b7e298cf2
This was lost when ass_configure was split into smaller functions.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@21443 b3059339-0415-0410-9bf9-f77b7e298cf2
USE_OSD was hardcoded to true in configure, manually turning it off
would break compilation, and most OSD-related code wasn't affected by it
anyway so it did nothing useful.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@21177 b3059339-0415-0410-9bf9-f77b7e298cf2
(cehoyos [at] rainbow studorg tuwien ac at) with small modifications
by me.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@20989 b3059339-0415-0410-9bf9-f77b7e298cf2
Recent libass api changes moved fontconfig initialization to filter's
config() function. It is bad, because cache update can take a long time,
resulting in unpleasant sound effects. This change restores the original
behaviour.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@20722 b3059339-0415-0410-9bf9-f77b7e298cf2
- ass_instance_t renamed to ass_renderer_t
- ass_library_t introduced
- use of mplayer-specific global variables limited to ass_mp.c
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@20493 b3059339-0415-0410-9bf9-f77b7e298cf2
FontConfig initialization moved from ass_init() to ass_set_fonts().
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@20462 b3059339-0415-0410-9bf9-f77b7e298cf2
This mode has the following differences:
- Video timing is correct for streams with B frames, at least with some
demuxers.
- Video filters can modify frame timestamps and insert new frames, and
removing frames is handled better than before.
- Some things are known to break, it's not usable as the default yet.
Things should work as before when the -correct-pts option is not used.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@18922 b3059339-0415-0410-9bf9-f77b7e298cf2
Syntax is we decided, so you can give the nomes or not with both
vop and vf. vf take precedence over vop.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@9594 b3059339-0415-0410-9bf9-f77b7e298cf2
