This affects small seeks backwards while within the buffer. Demuxers
usually avoid this, so it's probably not triggered very often. (Although
demux_mkv.c potentially triggers it often, and it uses stream_peek() to
explicitly guarantee that it can use this code to seek back.) The
condition is complex enough to warrant an assertion.
While this is perfectly OK on Unix, it causes annoying valgrind
warnings, and might be otherwise confusing to others.
On Windows, the runtime can actually abort the process if this is
called.
push.c part taken from a patch by Pedro Pombeiro.
All relevant authors have agreed.
There are two exceptions, patches by authors who could not be reached.
This commit tries to remove their copyright.
a0f08fbe: messes with the seeking code corner cases. The EOF flag logic
was changed at some point, and always had a flaky history (see e.g.
347cf97250274ca370411f275999efb90d5e6084ff08d0c32e2f77e3de5566f09554a844, all which happened after that patch, MPlayer ones without that
patch). I claim that all of the copyright the patch might have added is
gone. Except the message in stream_seek(), which this commit removes.
The other code removed/changed in stream_seek() is probably not from
that patch, but it doesn't hurt to be sure, and also makes it more
readable. (It might change the behavior so that sometimes the eof flag
is set after a seek, but it doesn't matter here.)
2aa6acd9: it looks like the seek_forward() modified by this patch was
later moved to stream.c and renamed to stream_skip_read() in a790f2133.
(Looking closer at it, it was actually modified again a bunch of times,
fixing the logic.) I rewrote it in this commit. The code ended up rather
similar, which probably could lead to doubts whether this was done
properly, but I guess the reader of this will just have to believe me. I
knew what stream_skip_read() was supposed to do (which was reinforced
when I tried to replace it on the caller side), without reading the
pre-existing code in detail. I had to "relearn" the logic how buf_pos
and bug_len work - it was actually easy to see from stream_read_char()
how to skip the data, essentially by generalizing its logic from 1 byte
to N bytes. From the old code I only "used" the fact that it's obviously
a while(len>0) look, that has to call stream_fill_buffer repeatedly to
make progress. At first I actually didn't use stream_fill_buffer_by(),
but the variant without _by, but readded it when I checked why the old
code used it (see cd7ec016e7). This has to be good enough. In the end,
it's hard to argue that this could be implemented in a way not using
such a loop.
Other than this, I could add the usual remarks about how this code was
not modularized in the past, and how stream.c contained DVD code, and
how this was later modularized, moving the copyright to other files, and
so on. Also, if someone wrote a stream module, and was not asked about
LGPL relicensing, we don't consider the entry in stream_list[]
copyrightable.
The original functions come from 24c6f11c8b, which says that these
functions were copied from another project. This other project is GPL
and was written by an unknown author, so there is no hope to relicense
them to LGPL.
Replace the existing functions with code written by Avi Halachmi. He did
not see the old code, but wrote it based on the function signature and
an extended description of what they should do (http://sprunge.us/edia).
Some additional help was provided by me (in particular the function of
the "ok" parameter and how to implement it - not in the original
ASFRecorder code).
Some of the code is hilariously similar, but these are coincidences. The
name of the variable "c" probably "leaked" from me, but "o" is a true
coincidence.
The code was integrated by me - my only change is changing the function
names to the old ones, moving the order of the top-level declarations,
and changing "default_ok" to "url_default_ok", and changing the strings
from char* to char[].
The author of the new code is Avi Halachmi.
Reallows enabling dvdnav without enabling dvdread which was broken
in 77cbb3543 when they were both disabled by default.
Since dvdnav requires dvdread, we can enable dvdread:// even if
--enable-dvdread isn't passed.
Fixes#4290
Because it's kind of dumb. (But not sure if it was worth the trouble.)
For stream_file.c, we add new explicit fields. The rest are rather
special uses and can be killed by comparing the stream impl. name.
The changes to DVD/BD/CD/TV are entirely untested.
"uncached_stream" is a pretty bad name. It could be mistaken for a
boolean, and then its meaning would be inverted. Rename it.
Also add a "caching" field, which signals that the stream is a cache or
reads from a cache. This is easier to understand and more flexible.
This is almost cosmetic, but removes the duplicated EOF-setting.
Somewhat oddly, this will enter the reconnect path and exit it
immediately again - should be fine.
Commit 7be495b3 added the cancellation test, but forgot to set the eof
flag. This could lead to demux_mkv.c not terminating if the stream was
cancelled in some code paths.
This function is what is supposed to set the EOF flag in the first
place, so just add the missing code.
Benefits demux_mkv.c, or demux_lavf.c during probing. In particular
demux_lavf.c can sometimes get "stuck" when reading from a slow/blocking
source, and if probing needs more than a few iterations.
Since this is a read of an atomic variable with relaxed semantics, this
should have no impact on reading speed at all, not even theoretically.
This was excessively useless, and I want my time back that was needed to
explain users why they don't want to use it.
It captured the byte stream only, and even for types of streams it was
designed for (like transport streams), it was rather questionable.
As part of the removal, un-inline demux_run_on_thread() (which has only
1 call-site now), and sort of reimplement --stream-dump to write the
data directly instead of using the removed capture code.
(--stream-dump is also very useless, and I struggled coming up with an
explanation for it in the manpage.)
--list-protocol was printing a *:// entry, which looked strange at best.
The "*" protocol was used to always match everything, so stream_cb.c
could hook in custom protocols with a prefix chosen by the API user.
Change it instead so that an empty protocol list means "match all",
which also gets rid of the special-cased "*" entry.
This has all been made unnecessary recently. The change not to copy the
global option struct in particular can be made because now nothing
accesses the global options anymore in the demux and stream layers.
Some code that was accidentally added/changed in commit 5e30e7a0 is also
removed, because it was simply committed accidentally, and was never
used.
Don't access MPOpts directly, and always use the new m_config.h
functions for accessing them in a thread-safe way.
The goal is eventually removing the mpv_global.opts field, and the
demuxer/stream-layer specific hack that copies MPOpts to deal with
thread-safety issues.
This moves around a lot of options. For one, we often change the
physical storage location of options to make them more localized,
but these changes are not user-visible (or should not be). For
shared options on the other hand it's better to do messy direct
access, which is worrying as in that somehow renaming an option
or changing its type would break code reading them manually,
without causing a compilation error.
If the normal stream cache init fails, and a file cache was initialized
before, we free the file cache as well. But since the file cache is
chained to the real stream, the real stream will also be freed. This has
to be prevented by clearing the pointer to the original stream in the
uncached_stream field.
This could in particular be triggered by using --cache-initial=1000 and
aborting playback during loading. (Without that option, stream cache
init failure is far less likely.)
For clang, it's enough to just put (void) around usages we are
intentionally ignoring the result of.
Since GCC does not seem to want to respect this decision, we are forced
to disable the warning globally.
This code evolved into an ifdef mess as support for cancellation on
Windows was added. Make the Windows-specific code completely separate.
It looks cleaner, and it also means that some of the posix code is not
uselessly enabled on Windows. The latter made msvcrt.dll output warnings
because it does not like -1 passed as FD to read/write. (The same would
be harmless on POSIX.)
This is only for specific Hauppage cards. According to the comments in
who is actively using this feature. Get it out of the way.
Anyone who still wants to use this should complain. Keeping this code
would not cause terribly much additional work, and it could be restored
again. (But not if the request comes months later.)
Don't print the URL that is opened twice. stream.c and stream_lavf.c
each printed it once. Remove the logging from stream_lavf.c, and move
the log call to a more interesting point.
This works similar to the existing .rar support, but uses libarchive.
libarchive supports a number of formats, including zip and (most of)
rar.
Unfortunately, seeking does not work too well. Most libarchive readers
do not support seeking, so it's emulated by skipping data until the
target position. On backwards seek, the file is reopened. This works
fine on a local machine (and if the file is not too large), but will
perform not so well over network connection.
This is disabled by default for now. One reason is that we try
libarchive on every file we open, before trying libavformat, and I'm not
sure if I trust libarchive that much yet. Another reason is that this
breaks multivolume rar support. While libarchive supports seeking in
rar, and (probably) supports multivolume archive, our support of
libarchive (probably) does not. I don't care about multivolume rar, but
vocal users do.
This code does not know whether the stream supports reconnecting until
STREAM_CTRL_RECONNECT is called. So the message should be printed after
it. To avoid that reconnects that succeed on the first try go unnoticed,
print a warning on success.
I think this is what I alwass missed ever since I found the MPlayer
cache options: a way to enable the cache on local files with the default
settings, whatever they are.
Seems appropriate, and will probably avoid performance surprises with
scary architectures which don't have trivial implementations for atomic
loads. (Consider that demux_mkv calls this very often now, and
libavformat demuxers and streams did this for a while now.)
It was possible to make the player play local files by putting rar://
links into remote playlists, and some other potentially unsafe things.
Redo the handling of it. Now the rar-redirector (the thing in
demux_playlist.c) sets disable_safety, which makes the player open any
playlist entries returned. This is fine, because it redirects to the
same file anyway (just with different selection/interpretation of the
contents). On the other hand, rar:// itself is now considered fully
unsafe, which means that it is ignored if found in normal playlists.
Refactors an older hack, which for some reason used a more complicated
way. This generates the playlist representing the contents of the rar
file in demux_playlist.c. The pseudo-demuxer could easily be separate
from the the playlist parsers (and in fact there's almost no shared
code), but I don't think this obscure feature deserves a separate file.
Sample files created with:
rar a -v20000k -m0 files.rar file1.mkv file1.mkv
Most things stopped using this field for better support of growing
files. Go through the trouble to repalce the remaining uses, so it can
be removed.
Also move the "streaming" field; saves 4 bytes (wow!).
Fix return types and return values to make them more consistent. Some
reformatting and making code more concise.
In stream_reconnect(), avoid the additional mp_cancel_test() call by
moving the "connection lost" message below the mp_cancel_wait() call,
which effectively leads to the same behavior when the stream was already
canceled. (The goal is not to show the message in this case.)
Merge stream_seek_long() into stream_seek(). It was the only caller.
Always clear the eof flag on seeks.
Reduce access to stream internals in cache.c and stream_lavf.c.
In my opinion, libavformat should be doing this. But a patch handling a
very safe case rejected, so I suppose we have to do it manually. (This
patch was only escaping spaces, which can never work because they break
the basic syntax of the HTTP protocol.)
This commit attempts to do 2 things:
- Try to guess whether libavformat will use the URL for http. This is
not always trivial, because some protocols will recursively pass part
of the user URL to http in some way.
- Try to fix invalid URLs. We fix only the simplest case: only
characters that are never valid are escaped. This excludes invalid
escape codes, which happen with freestanding '%' characters.
Fixes#1495.
...because everything is terrible.
strerror() is not documented as having to be thread-safe by POSIX and
C11. (Which is pretty much bullshit, because both mandate threads and
some form of thread-local storage - so there's no excuse why
implementation couldn't implement this in a thread-safe way. Especially
with C11 this is ridiculous, because there is no way to use threads and
convert error numbers to strings at the same time!)
Since we heavily use threads now, we should avoid unsafe functions like
strerror().
strerror_r() is in POSIX, but GNU/glibc deliberately fucks it up and
gives the function different semantics than the POSIX one. It's a bit of
work to convince this piece of shit to expose the POSIX standard
function, and not the messed up GNU one.
strerror_l() is also in POSIX, but only since the 2008 standard, and
thus is not widespread.
The solution is using avlibc (libavutil, by its official name), which
handles the unportable details for us, mostly. We avoid some pain.
In addition to the messed-up expression, the endianness was also
inverted. The code reads big endian by default.
It "worked" by coincidence, but for little endian, codepoints outside of
latin1 were broken.
The broken expression was found by Coverity.
stream_rar.c peeks the first few bytes when trying to open, which means
that opening any stream reads at least 2KB of data (internal buffer
size) on opening. This broke --stream-dump, which saved only the data
following this initial buffer.
Hack it around by writing the current buffer to the capture file too,
and move stream_capture_write() above stream_set_capture_file() for this
purpose.
Cleaner solutions might include: handling the terrible rar thing
differently, or using the "proper" stream API for dumping. (The latter
is not done, because --stream-dump shares code with the --stream-capture
misfeature.)
Fixes#1215.