Adds support for extracting codec profile. Old properties are redirected
to new one and removed from docs. Likely will stay like that forever as
there is no reason to remove them.
As a effect of unification of properties between audio and video,
video-codec will now print codec (format) descriptive name, not decoder
long name as it were before. In practice this change fixes what docs
says. If you really need decoder name, use the `track-list/N/decoder-desc`.
This exposes whether a video track is detected as an image, which is
useful for profile conditions, property expansion and lavfi-complex.
The lavf demuxer sets image to true when the existing check detects an
image.
When the lavf demuxer fails, the mf one guesses if the file is an image
by its extension, so sh->image is set to true when the mf demuxer
succeds and there's only one file.
The mkv demuxer just sets image to true for any attached picture.
The timeline demuxer just copies the value of image from source to
destination. This sets image to true for attached pictures, standalone
images and images added with !new_stream in EDL playlists, but it is
imperfect since you could concatenate multiple images in an EDL playlist
(which should be done with the mf demuxer anyway). This is good enough
anyway since the comment of the modified function already says it is
"Imperfect and arbitrary".
Unfortunately, this functionality in large part based on a struct
member that was made private in FFmpeg/FFmpeg@7489f63281
in May. Unfortunately, this was not noticed during review.
This reverts commit 0862664ac9.
This exposes whether a video track is detected as an image. This is
useful for profile conditions, property expansion and lavfi-complex, and
is more accurate than any detection even Lua scripts can perform, since
they can't differentiate between images and videos without container-fps
and audio and with duration 1 (which is the duration set by the mf
demuxer with the default --mf-fps=1).
The lavf demuxer image check is moved to where the number of frames is
available for comparison, and is modified to check the number of frames
and duration instead of the video codec. This doesn't misdetect videos
in a codec commonly used for images (e.g. mjpeg) as images, and can
detect images in a codec commonly used for videos (e.g. 1-frame gifs).
pix files are also now detected as images, while before they weren't
since the condition was checking if the AVInputFormat name ends with
_pipe, and alias_pix doesn't.
Both nb_frames and codec_info_nb_frames are checked because nb_frames is
0 for some video codecs (hevc, av1, vc1, mpeg1video, vp9 if forcing
--demuxer=lavf), and codec_info_nb_frames is 1 for others (mpeg, mpeg4,
wmv3).
The duration is checked as well because for some uncommon codecs and
containers found in FFMpeg's FATE suite, libavformat returns nb_frames =
0 and codec_info_nb_frames = 1. For some of them it even returns
duration = 0, so they are blacklisted in order to never be considered
images.
The extra codecs that would have to be blacklisted without checking the
duration are AV_CODEC_ID_4XM, AV_CODEC_ID_BINKVIDEO,
AV_CODEC_ID_DSICINVIDEO, AV_CODEC_ID_ESCAPE130, AV_CODEC_ID_MMVIDEO,
AV_CODEC_ID_NUV, AV_CODEC_ID_RL2, AV_CODEC_ID_SMACKVIDEO and
AV_CODEC_ID_XAN_WC3, while the containers are film-cpk, ivf and ogg.
The lower limit for duration is 10 because that's the duration of
1-frame gifs.
Streams with codec_info_nb_frames 0 are not considered images because
vp9 and av1 have nb_frames = 0 and codec_info_nb_frames = 0, and we
can't rely on just the duration to detect them because they could be
livestreams without an initial duration, and actually even if we could
for these codecs libavformat returns huge negative durations like
-9223372036854775808.
Some more images in the FATE suite that are really frames cut from a
video in an uncommon codec and container, like cine/bayer_gbrg8.cine,
could be detected by allowing codec_info_nb_frames = 0, but then any
present and future video codec with nb_frames = 0 and
codec_info_nb_frames = 0 would need to be added to the blacklist. Some
even have duration > 10, so to detect these images the duration check
would have to be removed, and all the previously mentioned extra codecs
and containers would have to be added added to the blacklists, which
means that images that use them (if they exist anywhere) will never be
detected. These FATE images aren't detected as such by mediainfo either
anyway, nor can a Lua script reliably detect them as images since they
have container-fps and duration > 0 and != 1, and you probably will
never see files like them anywhere else.
For attached pictures the lavf demuxer always set image to true, which
is necessary because they have duration > 10. There is a minor change in
behavior for which audio with attached pictures now has mf-fps as
container-fps instead of unavailable, but this makes it consistent with
external cover art, which was already being assigned mf-fps.
When the lavf demuxer fails, the mf one guesses if the file is an image
by its extension, so sh->image is set to true when the mf demuxer
succeds and there's only one file.
Even if you add a video's file type to --mf-type and open it with the mf
protocol, only the first frame is used, so setting image to true is
still accurate.
When converting an image to the extensions listed in demux/demux_mf.c,
tga and pam files are currently the only ones detected by the mf demuxer
rather than lavf. Actually they are detected with the image2 format, but
it is blacklisted; see d0fee0ac33.
The mkv demuxer just sets image to true for any attached picture.
The timeline demuxer just copies the value of image from source to
destination. This sets image to true for attached pictures, standalone
images and images added with !new_stream in EDL playlists, but it is
imperfect since you could concatenate multiple images in an EDL playlist
(which should be done with the mf demuxer anyway). This is good enough
anyway since the comment of the modified function already says it is
"Imperfect and arbitrary".
In this scenario, the demuxer will output timestamps offset by the codec
delay (e.g. negative timestamps at the start; mkv simulates those), and
the trimming in the decoder (often libavcodec, but ad_lavc.c in our
case) will adjust the timestamps back (e.g. stream actually starts at
0).
This offset needs to be taken into account when seeking. This worked in
the uncached case. (demux_mkv.c is a bit tricky in that the index is
already in the offset space, so it compensates even though the seek call
does not reference codec_delay.) But in the cached case, seeks backwards
did not seek enough, and forward they seeked too much.
Fix this by adding the codec delay to the index search. We need to get
"earlier" packets, so e.g. seeking to position 0 really gets the initial
packets with negative timestamps.
This also adjusts the seek range start. This is also pretty obvious: if
the beginning of the file is cached, the seek range should start at 0,
not a negative value. We compare 0-based timestamps to it later on.
Not sure if this is the best approach. I also could have thought
about/checked some corner cases harder. But fuck this shit.
Not fixing duration (who cares) or end trimming, which would reduce the
seek range and duration (who cares).
Fixes several issues playing back mpegts with video streams marked
as having "still images". For example, see this video which has
frames only every 6s: https://s3.amazonaws.com/tmm1/music-choice.ts
Changes include:
- start playback right away, without waiting for first video frame
- do not consider the sparse video stream in demuxer underrun detection
- do not require multiple video frames for the VO
- use audio as the master stream for demuxer metadata events
- use audio stream for playback time
Signed-off-by: Aman Gupta <aman@tmm1.net>
ffmpeg marks audio tracks which are not meant to be played standalone
as DEPENDENT. these are typically used in DVB broadcasts for audio
descriptions, and are meant to be mixed into the main audio track during
playback.
This fixes when resuming certain broken h264 files encoded by x264. See
FFmpeg commit 840b41b2a643fc8f0617c0370125a19c02c6b586 about the x264
bug itself.
Normally, the unregistered user data SEI (that contains the x264 version
string) is informational only. But libavcodec uses it to workaround a
x264 bug, which was recently fixed in both libavcodec and x264. The fact
that both encoder and decoder were buggy is the reason that it was not
found earlier, and there are apparently a lot of files around created by
the broken decoder. If libavcodec sees the SEI, this bug can be worked
around by using the old behavior.
If you resume a file with mpv (i.e. seeking when the file loads),
libavcodec never sees the first video packet. Consequently it has to
assume the file is not broken, and never applies the workaround,
resulting in garbage being played.
Fix this by always feeding the first video packet to the decoder on
init, and then flushing the codec (to avoid that an unwanted image is
output). Flushing the codec does not remove info such as the x264
version. We also abuse the fact that the first avcodec_send_packet()
always pushes the frame into the decoder (so we don't have to trigger
the decoder by requsting an output frame).
More the ignore_eof field to the internal demux_stream struct. This is
relatively messy, because the internal struct exists only once the
stream is created, and after that setting the ignore_eof flag is a race
condition. We could bother with adding demux_add_sh_stream() parameters
for this, but let's not. So in theory a tiny race condition is
introduced, which can never be triggered since all demux API functions
are called by the playback thread only anyway.
Fix that ts_offset is accessed without log (this was introduced much
earlier by myself).
Introduce an alternative way of avoiding the annoying EOF reached
messages by not resetting the EOF flags for CC streams when a CC packet
is added. This makes the second commit in the PR which added the
original fix unnecessary.
As another cosmetic change merge the check in cached_demux_control()
into a single if().
In the future, the CC pseudo-stream should probably be replaced with an
entire pseudo-demuxer or such, which would avoid some of the messiness
(or maybe not, we don't know yet).
This adds handling of spherical video metadata: retrieving it from
demux_lavf and demux_mkv, passing it through filters, and adjusting it
with vf_format. This does not include support for rendering this type of
video.
We don't expect we need/want to support the other projection types like
cube maps, so we don't include that for now. They can be added later as
needed.
Also raise the maximum sizes of stringified image params, since they
can get really long.
All authors of the current code have agreed.
For most of its life, MPlayer used Microsoft structs like WAVEFORMATEX
to describe media content. It appears these were copied from wine in
61c5a99851. Copyright is unclear, but mpv completely removed use of
these structs anyway. (demux_mkv.c still contains code to read these
fields from a byte stream, but the struct is fully gone.)
42f97b2b82: cehoyos (who probably didn't agree with LGPL) applied a
patch by someone who agreed. It's unknown whether cehoyos modified the
patch (and thus his copyright would apply), but the changed code was
removed anyway. (The code was first moved somewhere else, then removed.)
efd53eed61: the patch author was not asked. Although the mkv_sh_sub_t
struct was later moved to stheader.h, the added field was removed
without replacement.
f6878753fb: nick, who could not be reached, added an include guard, but
the guard was changed several times later, and it's probably not
copyrightable anyway.
afb0fd5ea1: the same nick adds a field that was later replaced and
finally removed again in 8cd6b20571.
Implementation-wise, the values from the demuxer/codec header are merged
with the values from the decoder such that the former are used only
where the latter are unknown (0/auto).
Instead of passing through double float timestamps opaquely, pass real
timestamps. Do so by always setting a valid timebase on the
AVCodecContext for audio and video decoding.
Specifically try not to round timestamps to a too coarse timebase, which
could round off small adjustments to timestamps (such as for start time
rebasing or demux_timeline). If the timebase is considered too coarse,
make it finer.
This gets rid of the need to do this specifically for some hardware
decoding wrapper. The old method of passing through double timestamps
was also a bit questionable. While libavcodec is not supposed to
interpret timestamps at all if no timebase is provided, it was
needlessly tricky. Also, it actually does compare them with
AV_NOPTS_VALUE. This change will probably also reduce confusion in the
future.
...and ignore it. The main purpose is for retrieving per-track
replaygain tags. Other than that per-track tags are not used or accessed
by the playback core yet.
The demuxer infrastructure is still not really good with that whole
synchronization thing (at least in part due to being inherited from
mplayer's single-threaded architecture). A convoluted mechanism is
needed to transport the tags from demuxer thread to user thread. Two
factors contribute to the complexity: tags can change during playback,
and tracks (i.e. struct sh_stream) are not duplicated per thread.
In particular, we update the way replaygain tags are retrieved. We first
try to use per-track tags (common in Matroska) and global tags
(effectively formats like mp3). This part fixes#3405.
AVFormatContext.codec is deprecated now, and you're supposed to use
AVFormatContext.codecpar instead.
Handle this for all of the normal playback code.
Encoding mode isn't touched.
This is mainly a refactor. I'm hoping it will make some things easier
in the future due to cleanly separating codec metadata and stream
metadata.
Also, declare that the "codec" field can not be NULL anymore. demux.c
will set it to "" if it's NULL when added. This gets rid of a corner
case everything had to handle, but which rarely happened.
Just so I can remove a few lines from dec_sub.c.
This is slightly inelegant, as the whole subtitle file has to be read
into memory, converted at once in memory, and then provided to
libavformat in an awkward way by creating a memory stream instead of
using demuxer->stream. It also won't be possible to force the charset on
subtitles in binary container formats - but this wasn't exposed before,
and we just hope this won't be ever needed. (One motivation was fixing
broken files with non-UTF8 muxed.) It also won't be possible to change
the charset on the fly, but this was not exposed either.
Since commit 6d9cb893, subtitle state doesn't survive timeline switches
(ordered chapters etc.). So there is no point in caching the state per
sh_stream anymore (which would be required to deal with multiple
segments). Move the cache to struct track.
(Whether it's worth caching the subtitle state just for the situation
when subtitle tracks get reselected is questionable. But for now, it's
nice to have the subtitles immediately show up when reselecting a
subtitle.)
MPlayer traditionally always used the display aspect ratio, e.g. 16:9,
while FFmpeg uses the sample (aka pixel) aspect ratio.
Both have a bunch of advantages and disadvantages. Actually, it seems
using sample aspect ratio is generally nicer. The main reason for the
change is making mpv closer to how FFmpeg works in order to make life
easier. It's also nice that everything uses integer fractions instead
of floats now (except --video-aspect option/property).
Note that there is at least 1 user-visible change: vf_dsize now does
not set the display size, only the display aspect ratio. This is
because the image_params d_w/d_h fields did not just set the display
aspect, but also the size (except in encoding mode).
Slightly simpler, and removes the need to pre-read all subtitle packets.
This still does the subtitle charset conversion on the packet level
(instead converting when parsing the file), so in theory this still
could provide a way to change the charset at runtime. But maybe even
this should be removed, as FFmpeg is somewhat likely to get its own
charset detection and conversion mechanism in the future. (Would have
to keep the subtitle file in memory to allow changing the charset on
the fly, I guess.)
At least Matroska files have a "forced" flag (in addition to the
"default" flag). Export this flag. Treat it almost like the default
flag, but with slightly higher priority.
MPlayer traditionally had completely separate sh_ structs for
audio/video/subs, without a good way to share fields. This meant that
fields shared across all these headers had to be duplicated. This commit
deduplicates essentially the last remaining duplicated fields.
Remove the old implementation for these properties. It was never very
good, often returned very innaccurate values or just 0, and was static
even if the source was variable bitrate. Replace it with the
implementation of "packet-video-bitrate". Mark the "packet-..."
properties as deprecated. (The effective difference is different
formatting, and returning the raw value in bits instead of kilobits.)
Also extend the documentation a little.
It appears at least some decoders (sipr?) need the
AVCodecContext.bit_rate field set, so this one is still passed through.
Trying to handle such video is almost worthless, but it was requested by
at least 2 users.
If there are no timestamps, enable byte seeking by setting
ts_resets_possible. Use the video FPS (wherever it comes from) and the
audio samplerate for timing. The latter was already done by making the
first packet emit DTS=0; remove this again and do it "properly" in a
higher level.
Remove coded_width and coded_height. This was originally added in commit
fd7dde40, when BITMAPINFOHEADER was killed. The separate fields became
redundant in commit e68f4be1. Remove them (nothing passed to the
decoders actually changes with _this_ commit).
Apparently using the stream index is the best way to refer to the same
streams across multiple FFmpeg-using programs, even if the stream index
itself is rarely meaningful in any way.
For Matroska, there are some possible problems, depending how FFmpeg
actually adds streams. Normally they seem to match though.
See previous commits. This finally replaces directly reading the file
data into a struct with reading them manually. In theory this is more
portable (no alignment issues and other things). For the most part,
it's nice seeing this gone.
MPlayer traditionally did this because it made sense: the most important
formats (avi, asf/wmv) used Microsoft formats, and many important
decoders (win32 binary codecs) also did. But the world has changed, and
I've always wanted to get rid of this thing from the codebase.
demux_mkv.c internally still uses it, because, guess what, Matroska has
a VfW muxing mode, which uses these data structures natively.
For a while, we used this to transfer PCM from demuxer to the filter
chain. We had a special "codec" that mapped what MPlayer used to do
(MPlayer passes the AF sample format over an extra field to ad_pcm,
which specially interprets it).
Do this by providing a mp_set_pcm_codec() function, which describes a
sample format in a generic way, and sets the appropriate demuxer header
fields so that libavcodec interprets it correctly. We use the fact that
libavcodec has separate PCM decoders for each format. These are
systematically named, so we can easily map them.
This has the advantage that we can change the audio filter chain as we
like, without losing features from the "rawaudio" demuxer. In fact, this
commit also gets rid of the audio filter chain formats completely.
Instead have an explicit list of PCM formats. (We could even just have
the user pass libavcodec PCM decoder names directly, but that would be
annoying in other ways.)
Until now, the audio chain could handle both little endian and big
endian formats. This actually doesn't make much sense, since the audio
API and the HW will most likely prefer native formats. Or at the very
least, it should be trivial for audio drivers to do the byte swapping
themselves.
From now on, the audio chain contains native-endian formats only. All
AOs and some filters are adjusted. af_convertsignendian.c is now wrongly
named, but the filter name is adjusted. In some cases, the audio
infrastructure was reused on the demuxer side, but that is relatively
easy to rectify.
This is a quite intrusive and radical change. It's possible that it will
break some things (especially if they're obscure or not Linux), so watch
out for regressions. It's probably still better to do it the bulldozer
way, since slow transition and researching foreign platforms would take
a lot of time and effort.
--hls-bitrate=min/max lets you select the min or max bitrate. That's it.
Something more sophisticated might be possible, but is probably not even
worth the effort.
This inserts an automatic conversion filter if a Matroska file is marked
as 3D (StereoMode element). The basic idea is similar to video rotation
and colorspace handling: the 3D mode is added as a property to the video
params. Depending on this property, a video filter can be inserted.
As of this commit, extending mp_image_params is actually completely
unnecessary - but the idea is that it will make it easier to integrate
with VOs supporting stereo 3D mogrification. Although vo_opengl does
support some stereo rendering, it didn't support the mode my sample file
used, so I'll leave that part for later.
Not that most mappings from Matroska mode to vf_stereo3d mode are
probably wrong, and some are missing.
Assuming that Matroska modes, and vf_stereo3d in modes, and out modes
are all the same might be an oversimplification - we'll see.
See issue #1045.
This adds a thread to the demuxer which reads packets asynchronously.
It will do so until a configurable minimum packet queue size is
reached. (See options.rst additions.)
For now, the thread is disabled by default. There are some corner cases
that have to be fixed, such as fixing cache behavior with webradios.
Note that most interaction with the demuxer is still blocking, so if
e.g. network dies, the player will still freeze. But this change will
make it possible to remove most causes for freezing.
Most of the new code in demux.c actually consists of weird caches to
compensate for thread-safety issues (with the previously single-threaded
design), or to avoid blocking by having to wait on the demuxer thread.
Most of the changes in the player are due to the fact that we must not
access the source stream directly. the demuxer thread already accesses
it, and the stream stuff is not thread-safe.
For timeline stuff (like ordered chapters), we enable the thread for the
current segment only. We also clear its packet queue on seek, so that
the remaining (unconsumed) readahead buffer doesn't waste memory.
Keep in mind that insane subtitles (such as ASS typesetting muxed into
mkv files) will practically disable the readahead, because the total
queue size is considered when checking whether the minimum queue size
was reached.
