Calling them separately doesn't really make sense, and all existing
calls to them usually combined them. One subtitle difference was that
af_init() didn't wipe the filter chain if initialization of the chain
itself failed, but that didn't really make sense anyway.
Also remove af_init() from the code for setting balance in mixer.c. The
mixer should be in the initialized state only if audio is fully
initialized, so the af_init() call made no sense.
Note that the filter "editing" code in command.c doesn't really do a
nice job of handling errors in case recreating an _old_ (known to work)
filter chain unexpectedly fails, and this obscure/rare case might be
differently handled after this change.
Softvol always used a linear multiplier for volume control. This was
converted to dB, and then back to linear in af_volume. Remove this non-
sense. We still try to keep the command line argument to af_volume in
dB, though.
It's quite unlikely, but functions like mp_find_user_config_file() can
return NULL, e.g. if $HOME is unset.
Fix all the code that didn't check for this correctly yet.
Having to use -1 for that is generally quite annoying.
Audio formats are created from bitmasks, and it can't be excluded that
0 is not a valid format. Fix this by adjusting AF_FORMAT_I so that it
is never 0. Along with AF_FORMAT_F and the special formats, all valid
formats are covered and guaranteed to be non-0.
It's possible that this commit will cause some regressions, as the
check for invalid audio formats changes a bit.
The --speed option and the speed property used float. Change them to
double.
Change the commands that manipulate the property (speed_mult/add) to
double as well. Since the cycle command shares code with the add
command, we change that as well.
The reason for this change is that this allows better control over
speed, such as stepping by semitones. Using floats is also just plain
unnecessary.
In general, this warning can hint to actual bugs. We don't enable it
yet, because it would conflict with some unmerged code, and we should
check with clang too (this commit was done by testing with gcc).
Make the VF/VO/AO option parser available to audio filters. No audio
filter uses this yet, but it's still a quite intrusive change.
In particular, the commands for manipulating filters at runtime
completely change. We delete the old code, and use the same
infrastructure as for video filters. (This forces complete
reinitialization of the filter chain, which hopefully isn't a problem
for any use cases. The old code forced reinitialization too, but it
could potentially allow a filter to cache things; e.g. consider loaded
ladspa plugins and such.)
This code is supposed to run if dynamic filter insertion (such as when
inserting a volume filter in mixer.c) fails. Then it removes all filters
and recreates the default list of filters. But the code just blew up and
entered an endless loop, because it removed even the sentinel in/out
filters. This could happen when trying to use softvol controls while
using spdif, but also other situations. Fix it by calling the correct
code.
Also remove these obnoxious yoda-conditions.
Mostly copied from vf_lavfi. The parts that could be shared are minor,
because most code is about setting up audio and video, which are too
different.
This won't work with Libav. I used ffplay.c as guide, and noticed too
late that their setup methods are incompatible with Libav's. Trying to
make it work with both would be too much effort. The configure test for
av_opt_set_int_list() should disable af_lavfi gracefully when compiling
with Libav.
Due to option parser chaos, you currently can't have a "," as part of
the filter graph string - not even with quoting or escaping. This will
probably be fixed later.
The audio filter chain is not PTS aware. So we have to do some hacks
to make up a fake PTS, and we have to map the output PTS back to the
filter chain's method of tracking PTS changes and buffering, by
adjusting af->delay.
The libavresample version of the current Libav stable release lacks the
avresample_set_channel_mapping() function. (FFmpeg's libswresample seems
to be fine, because they added swr_set_channel_mapping() first.)
Add a cheap/slow workaround to do channel reordering on our own. We
don't use the recently removed MPlayer code (see commit 586b75a),
because that is not generic enough.
The functionality should be the same as with full-featured
libavresample, and any differences are bugs. It's probably slower,
though.
af_reinit() is responsible for inserting automatic conversion filters
for channel remixing, format conversion, and resampling. We don't
require that a single filter can do all these (even though
af_lavrresample does nearly all of this, sometimes af_format has to be
used instead for format conversions). This makes setting up the chain
more complicated, and a way is needed to prevent endless appending of
conversion filters if a conversion is not possible.
Until now, this used a stupidly simple yet robust static retry limit to
detect failure. This is perfectly fine, and the limit (20) was good
enough to handle about ~5 filters. But with more filters, and if each
filter requires 3 additional conversion filters, this would fail. So
raise the limit to 4 retries per filter. This is still stupidly simple
and robust, but won't arbitrarily fail if the filter count is too large.
If one of the input or output is an unknown layout, but the other is
known, it can still happen that channels are remixed randomly. Avoid
this by forcing default layouts in this case. (Doesn't work if the
channel counts are different.)
This is done in af_lavrresample now, and as part of format negotiation.
Also remove the remaining reorder_channel calls. They were redundant
and did nothing.
mp_audio has some redundant fields. Setters like mp_audio_set_format()
initialize these properly.
Also move the mp_audio struct to a the file audio.c.
We can remove a mysterious line of code from af.c:
in.format |= af_bits2fmt(in.bps * 8);
I'm not sure if this was ever actually needed, or if it was some kind of
"make it work" quick-fix that works against the way things were supposed
to work. All filters etc. now set the format correctly, so if there ever
was a need for this code, it's definitely gone.
Add dummy input and output filters to remove special cases in the format
negotiation code (af_fix_format_conversion() etc.). The output of the
filter chain is now negotiated in exactly the same way as normal
filters.
Negotiate setting the sample rate in the same way as other audio
parameters. As a side effect, the resampler is inserted at the start of
the filter chain instead of the end, but that shouldn't matter much,
especially since conversion and channel mixing are conflated into the
same filter (due to libavresample's API).
Anything this option did has been removed in the preceding 3 commits.
Note that even though these options sounded like a good idea (like
setting accuracy vs. speed tradeoffs), they were not really properly
implemented.
All this option did was deciding whether the resample filter was to be
insert at the beginning or end of the filter chain. Always do what the
option set for accuracy did. I doubt it makes much of a difference.
libavresample does most things in just one go anyway, so it won't
matter.
Dangerous and misleading. If it turns out that this is actually needed
to make certain setups work right, it should be added back in a better
way (in a way it doesn't cause random crashes).
The only thing this option did was changing the behavior of af_volume.
The option decided what sample format af_volume would use, but only if
the sample format was not already float. If the option was set, it would
default to float, otherwise to S16.
Remove use of the option and all associated code, and make af_volume
always use float (unless a af_volume specific sub-option is set).
Silence maximum value tracking. This message is printed when the filter
is destroyed, and it's slightly annoying. Was enabled due to enabling
float by default.
Switch the internal channel order to libavcodec's. If the channel number
mismatches at some point, use libavresample for up- or downmixing.
Remove the old af_pan automatic downmixing.
The libavcodec channel order should be equivalent to WAVEFORMATEX order,
at least nowadays. reorder_ch.h assumes that WAVEFORMATEX and libavcodec
might be different, but all defined channels have the same mappings.
Remove the downmixing with af_pan as well as the channel conversion with
af_channels from af.c, and prefer af_lavrresample for this. The
automatic downmixing behavior should be the same as before (if the
--channels option is set to 2, which is the default, the audio output
is forced to 2 channels, and libavresample does all downmixing).
Note that mpv still can't do channel layouts. It will pick the default
channel layout according to the channel count. This will be fixed later
by passing down the channel layout as well.
af_hrtf depends on the order of the input channels, so reorder to ALSA
(for which this code was written). This is better than changing the
filter code, which is more risky.
ao_pulse can accept waveext order directly, so set that as channel
mapping.
If format negotiation fails, and additional filters are inserted to fix
this, don't try to reinitialize the filter immediately. Instead, correct
the audio format, and let the caller retry.
Add a retry counter to af_reinit() to ensure that misbehaving filters
can't put the format negotiation into an endless loop.
Refactor to remove the duplicated format filter insertion code. Allow
other format converting filters to be inserted on format mismatches.
af_info.test_conversion checks whether conversion between two formats
would work with the given filter; do this to avoid having to insert
multiple conversion filters at once and such things. (Although this
isn't ideal: what if we want to avoid af_format for some conversions?
What if we want to split af_format in endian-swapping filters etc.?)
Prefer af_lavrresample for conversions that it supports natively,
otherwise let af_format handle the full conversion.
Make sure automatically inserted filters are removed on full reinit
(they are re-added later if they are really needed). Automatically
inserted filters were never explicitly removed, instead, it was
expected that redundant conversion filters detach themselves. This
didn't work if there were several chained format conversion filters,
e.g. s16le->floatle->s16le, which could result from repeated filter
insertion and removal. (format filters detach only if input format and
output format are the same.)
Further, the dummy filter (which exists only because af.c can't handle
an empty filter chain for some reason) could introduce bad conversions
due to how the format negotiation works. Change the code so that the
dummy filter never takes part on format negotiation. (It would be better
to fix format negotiation, but that would be much more complicated and
would involving fixing all filters.)
Simplify af_reinit() and remove the start audio filter parameter. This
means format negotiation and filter initialization is run more often,
but should be harmless.
The format was locked to s16. Extend it to accept all other ffmpeg
sample formats, and even allow different in- and output formats. The
generic filter code will still insert af_format on format mismatches,
though.
The change in af_scaletempo actually fixes a memory leak. af->data
contained a pointer to an allocated buffer, which was overwritten
during format negotiation. Set the format explicitly instead.
Remove `af_resample` and `af_lavcresample`. The former is a mess while the
latter uses an API that was long deprecated in libavcodec and is now removed.
`af_lavrresample` rougly has the same features and structure of
`af_lavcresample`.
libswresample fallback by wm4.
