The configure followed 5 different convetions of defines because the next guy
always wanted to introduce a new better way to uniform it[1]. For an
hypothetic feature 'hurr' you could have had:
* #define HAVE_HURR 1 / #undef HAVE_DURR
* #define HAVE_HURR / #undef HAVE_DURR
* #define CONFIG_HURR 1 / #undef CONFIG_DURR
* #define HAVE_HURR 1 / #define HAVE_DURR 0
* #define CONFIG_HURR 1 / #define CONFIG_DURR 0
All is now uniform and uses:
* #define HAVE_HURR 1
* #define HAVE_DURR 0
We like definining to 0 as opposed to `undef` bcause it can help spot typos
and is very helpful when doing big reorganizations in the code.
[1]: http://xkcd.com/927/ related
This one really did bite me hard (see previous commit), so enable it by
default.
Fix some cases of shadowing throughout the codebase. None of these
change behavior, and all of these were correct code, and just tripped up
the warning.
This function would probably be useful in other places too.
I'm not sure why vd.c doesn't apply the aspect if it changes size by
less than 4 pixels. Maybe it's supposed to avoid ugly results with bad
scalers if the difference is too small to be noticed normally.
Merged from pull request #246 by xylosper. Minor cosmetic changes, some
adjustments (compatibility with older libva versions), and manpage
additions by wm4.
Signed-off-by: wm4 <wm4@nowhere>
Until now, video output levels (obscure feature, like using TV screens
that require RGB output in limited range, similar to YUY) still required
handling of VOCTRL_SET_YUV_COLORSPACE. Simplify this, and use the new
mp_image_params code. This gets rid of some code. VOCTRL_SET_YUV_COLORSPACE
is not needed at all anymore in VOs that use the reconfig callback. The
result of VOCTRL_GET_YUV_COLORSPACE is now used only used for the
colormatrix related properties (basically, for display on OSD). For
other VOs, VOCTRL_SET_YUV_COLORSPACE will be sent only once after config
instead of twice.
This affects VOs which just reuse the mp_image from draw_image() to
return screenshots. The aspect of these images is never different
from the aspect the screenshots should be, so there's no reason to
adjust the aspect in these cases.
Other VOs still need it in order to restore the original image
attributes.
This requires some changes to the video filter code to make sure that
the aspect in the passed mp_images is consistent.
The changes in mplayer.c and vd_lavc.c are (probably) not strictly
needed for this commit, but contribute to consistency.
Using -vf eq and changing brightness, contrast, etc. using key bindings
with e.g. "add brightness 1" didn't work well: with step width 1, the
property gets easily "stuck". This is a rounding problem: e.g. setting
gamma to 3 would actually make it report that gamma is set to 2, so
the "add" command will obviously never reach 3 with a step width of 1.
Fix this by storing the parameters as integers.
This was broken in cac7702. This commit effectively changed these
properties to use the value as reported by vf_eq, instead of the
previously set value for the "add" command. This was more robust,
but not very correct either, so we keep the new behavior and make
vf_eq report its parameters more accurately.
Move the decoder parts from vo_vdpau.c to a new file vdpau_old.c. This
file is named so because because it's written against the "old"
libavcodec vdpau pseudo-decoder (e.g. "h264_vdpau").
Add support for the "new" libavcodec vdpau support. This was recently
added and replaces the "old" vdpau parts. (In fact, Libav is about to
deprecate and remove the "old" API without deprecation grace period,
so we have to support it now. Moreover, there will probably be no Libav
release which supports both, so the transition is even less smooth than
we could hope, and we have to support both the old and new API.)
Whether the old or new API is used is checked by a configure test: if
the new API is found, it is used, otherwise the old API is assumed.
Some details might be handled differently. Especially display preemption
is a bit problematic with the "new" libavcodec vdpau support: it wants
to keep a pointer to a specific vdpau API function (which can be driver
specific, because preemption might switch drivers). Also, surface IDs
are now directly stored in AVFrames (and mp_images), so they can't be
forced to VDP_INVALID_HANDLE on preemption. (This changes even with
older libavcodec versions, because mp_image always uses the newer
representation to make vo_vdpau.c simpler.)
Decoder initialization in the new code tries to deal with codec
profiles, while the old code always uses the highest profile per codec.
Surface allocation changes. Since the decoder won't call config() in
vo_vdpau.c on video size change anymore, we allow allocating surfaces
of arbitrary size instead of locking it to what the VO was configured.
The non-hwdec code also has slightly different allocation behavior now.
Enabling the old vdpau special decoders via e.g. --vd=lavc:h264_vdpau
doesn't work anymore (a warning suggesting the --hwdec option is
printed instead).
The symptom was that "-vf scale,format=rgba" broke the vsfilter
colorspace hack in sd_ass. vf->reconfig is allowed to overwrite its
input parameter for convenience (maybe that was a bad idea).
In general, this warning can hint to actual bugs. We don't enable it
yet, because it would conflict with some unmerged code, and we should
check with clang too (this commit was done by testing with gcc).
For some reason, both m_config and m_struct are somewhat similar, except
that m_config is much more powerful. m_config is used for VOs and some
other things, so to unify them. We plan to kick out m_struct and use
m_config for everything. (Unfortunately, m_config is also a bit more
bloated, so this commit isn't all that great, but it will allow to
reduce the option parser mess somewhat.)
This commit also switches all video filters to use the option macros.
One reason is that m_struct and m_config, even though they both use
m_option, store the offsets of the option fields differently (sigh...),
meaning the options defined for either are incompatible. It's easier to
switch everything in one go.
This commit will allow using the -vf option parser for other things,
like VOs and AOs.
There was a MPOpts fullscreen field, a mp_vo_opts.fs field, and
VOFLAG_FULLSCREEN. Remove all these and introduce a
mp_vo_opts.fullscreen flag instead.
When VOs receive VOCTRL_FULLSCREEN, they are supposed to set the
current fullscreen mode to the state in mp_vo_opts.fullscreen. They
also should do this implicitly on config().
VOs which are capable of doing so can update the mp_vo_opts.fullscreen
if the actual fullscreen mode changes (e.g. if the user uses the
window manager controls). If fullscreen mode switching fails, they
can also set mp_vo_opts.fullscreen to the actual state.
Note that the X11 backend does almost none of this, and it has a
private fs flag to store the fullscreen flag, instead of getting it
from the WM. (Possibly because it has to deal with broken WMs.)
The fullscreen option has to be checked on config() to deal with
the -fs option, especially with something like:
mpv --fs file1.mkv --{ --no-fs file2.mkv --}
(It should start in fullscreen mode, but go to windowed mode when
playing file2.mkv.)
Wayland changes by: Alexander Preisinger <alexander.preisinger@gmail.com>
Cocoa changes by: Stefano Pigozzi <stefano.pigozzi@gmail.com>
Image parameters like colorspace, color levels, and chroma location are
generally less important, and many filters don't set them correctly.
Force them instead in the generic VF code, which is probably better and
more convenient over all. So we designate this is a proper solution,
instead of a dirty hack.
libswscale doesn't seem to require this (anymore?), and libavfiltert's
vf_scale doesn't do it either. Moreover, this wasn't done for most other
subsampled formats, not even very old ones. So just remove it.
(It'd be quite easy to align on chroma boundaries with all pixel
formats, though.)
Until now, vf_scale only tried formats listed in the outfmt_list array.
Extend this and try every pixel format supported by mpv if trying
outfmt_list doesn't lead to success.
Also add some checks whether swscale really supports a given input or
output format. This was implicitly done with outfmt_list before.
ffmpeg's and the internal palette format used to have different
endianess, but that is not the case anymore. This code was forgotten
when that change was made.
Instead of handling colorspaces with VFCTRLs/VOCTRLs, make them part of
the normal video format negotiation. The colorspace is passed down like
other video params with config/reconfig calls.
Forcing colorspaces (via the --colormatrix options and properties) is
handled differently too: if it's changed, completely reinit the video
chain. This is slower and requires a precise seek to the same position
to perform an update, but it's simpler and less bug-prone. Considering
switching the colorspace at runtime by user-interaction is a rather
obscure feature, this is a good change.
The colorspace VFCTRLs and VOCTRLs are still kept. The VOs rely on it,
and would have to be changed to get rid of them. We'll do that later,
and convert them incrementally instead of in one go.
Note that controlling the output range now always works on VO level.
Basically, this means you can't get vf_scale to output full-range YUV
for whatever reason. If that is really wanted, it should be a vf_scale
option. the previous behavior didn't make too much sense anyway.
This commit fixes a few bugs (such as playing RGB video and converting
that to YUV with vf_scale - a recent commit broke this and forced the
VO to display YUV as RGB if possible), and might introduce some new
ones.
Use the video decoder chroma location flags and render chroma locations
other than centered. Until now, we've always used the intuitive and
obvious centered chroma location, but H.264 uses something else.
FFmpeg provides a small overview in libavcodec/avcodec.h:
-----------
/**
* X X 3 4 X X are luma samples,
* 1 2 1-6 are possible chroma positions
* X X 5 6 X 0 is undefined/unknown position
*/
enum AVChromaLocation{
AVCHROMA_LOC_UNSPECIFIED = 0,
AVCHROMA_LOC_LEFT = 1, ///< mpeg2/4, h264 default
AVCHROMA_LOC_CENTER = 2, ///< mpeg1, jpeg, h263
AVCHROMA_LOC_TOPLEFT = 3, ///< DV
AVCHROMA_LOC_TOP = 4,
AVCHROMA_LOC_BOTTOMLEFT = 5,
AVCHROMA_LOC_BOTTOM = 6,
AVCHROMA_LOC_NB , ///< Not part of ABI
};
-----------
The visual difference is literally minimal, but since videophiles
apparently consider this detail as quality mark of a video renderer,
support it anyway. We don't bother with chroma locations other than
centered and left, though.
Not sure about correctness, but it's probably ok.
The filter chain and the video ouputs have config() functions. They are
strictly limited to transfering the video size and format. Other
parameters (like color levels) have to be transferred separately.
Improve upon this by introducing a separate set of reconfig() functions,
which use mp_image_params to carry format parameters. This struct
contains all image format related parameters from config(), plus
additional parameters such as colorspace.
Change vf_rotate to use it, as well as vo_opengl. vf_rotate is just
an example/test case, but vo_opengl will need it later.
The intention is also to get rid of VOCTRL_SET_YUV_COLORSPACE. This
information is now handed to the VOs via reconfig(). The getter,
VOCTRL_GET_YUV_COLORSPACE, will still be needed though.
If the image is not writeable, the image actually has to be copied
beforehand. This was overlooked when converting the video chain to
reference counted images.
Fix a double free issue. This was overlooked when vf.c was changed to
free filter priv data automatically.
Can be used to refer to filters by name. Intended to be used when the
filter chain is changed at runtime.
A label can be assigned to a filter by prefixing it with '@name:', where
'name' is an user-chosen identifier. For example, a filter added with
'-vf-add @label1:gradfun=123' can be removed with '-vf-del @label1'.
If a filter with an already existing label is added, the existing filter
is replaced with the new filter (this happens for both -vf-add and
-vf-pre). If a filter is replaced, the new filter takes the position of
the old filter, instead of being appended/prepended to the filter chain
as usual. For -vf-toggle, labels are compared if at least one of the
filters has a label; otherwise they are compared by filter name and
arguments (like before). This means two filters are never considered
equal if one has a label and the other one does not.
This happens only if an option actually allocates memory (like strings).
Change filter API such that vf->priv is free'd by vf.c instead by the
filters. vf.c will free the option values as well.
These were found by the cppcheck and scan-build static analyzers. Most
of these aren't interesting (the 2 previous commits fix some interesting
cases found by these analyzers), and they don't nearly fix all warnings.
(Most of the unfixed warnings are spam, things MPlayer never cared
about, or false positives.)
Stefano Pigozzi
wm4
xylosper
Rudolf Polzer