af_volume is deprecated, and so are its replaygain sub-options. To make
it possible to use replaygain without deprecated options (and of course
to make it available at all after af_volume is dropped), reintroduce
them as top-level options.
This also means that they are easily changeable at runtime by using them
as properties. Change the "volume" property to use the new update
mechanism as well.
We don't actually bother sharing the implementation between new and
deprecated mechanisms, as the deprecated one will simply be deleted.
For the from_dB() functions, we mention anders' copyright, although I'm
not sure if a mere formula is copyrightable. This will have to be
determined later.
This whole change is mostly untested. Our distributed human CI will take
care of it.
Instead of pausing if --keep-open is active, stop
at end but continue playing if seeking backwards.
And then stop again when end is reached.
Signed-off-by: wm4 <wm4@nowhere>
Over the PR, the option was renamed, and the manpage additions were
slightly changed/enhanced.
Add subtitle filter to remove additions for deaf or hard-of-hearing
(SDH). This is for English, but may in part work for others too.
This is an ASS filter and the intention is that it can always be
enabled as it by default do not remove parts that may be normal text.
Harder filtering can be enabled with an additional option.
Signed-off-by: wm4 <wm4@nowhere>
since there are different views on what ontop is, we make the ontop
window level modifiable. at the moment only support for macOS was added.
the default for macOS was changed from 'system' to 'window' since this
fixes an unwanted behaviour in fullscreen and in general causes less
issues with expected behaviour.
Fixes#2376#3974
To make it easier for the eyes, multi line subtitles should
be left justified (for most languages).
This adds an option to define how subtitles are to be justified
inpendently of how they are aligned.
Also add option to enable --sub-justify to be applied on ASS subtitles.
This was excessively useless, and I want my time back that was needed to
explain users why they don't want to use it.
It captured the byte stream only, and even for types of streams it was
designed for (like transport streams), it was rather questionable.
As part of the removal, un-inline demux_run_on_thread() (which has only
1 call-site now), and sort of reimplement --stream-dump to write the
data directly instead of using the removed capture code.
(--stream-dump is also very useless, and I struggled coming up with an
explanation for it in the manpage.)
vo_opengl used to have it as sub-option, which made it very hard to pass
down option values to backends in a generic way (even if these options
were completely backend-specific). For --opengl-dcomposition we used a
VOFLAG to deal with this. Fortunately, sub-options are gone, and we can
just add it as global option.
Move the option to context_angle.c and add it as global option. I
thought about adding a mechanism to let backends declare options, which
would get magically picked up my m_config instead of having to add them
to the global option list manually (similar to VO vo_driver.options),
but decided against this complexity just for 1 or 2 backends. Likewise,
it could have been added as a single option to avoid the boilerplate of
an option struct, but then again there are probably going to be more
angle suboptions, and it's cleaner.
Since for mpv CLI, the player state is a singleton, full prefetching is
a bit tricky. We do it only on the demuxer layer.
The implementation reuses the old "open thread". This means there is
significant potential for regressions even if the new option is not
used. This is made worse by the fact that I barely tested this code.
The generic mpctx_run_reentrant() wrapper is also removed - this was its
only user, and its remains become part of the new implementation.
Introduce the --opengl-hwdec-interop option, which replaces
--hwdec-preload. The new option allows explicit selection of the interop
backend.
This is relatively complex, and I would have preferred not to add this,
but it's probably useful to debug certain problems. In exchange, the
"new" option documents that pretty much any but the simplest use of it
will not be forward compatible.
this replaces the old fullscreen with the native
macOS fullscreen. additional the
--fs-black-out-screens was removed since the new
API doesn't support it in a way the old one did.
it can possibly be re-added if done manually.
Fixes#2857#3272#1352#2062#3864
Long planned. Leads to some sanity.
There still are some rather gross things. Especially g_groups is ugly,
and a hack that can hopefully be removed. (There is a plan for it, but
whether it's implemented depends on how much energy is left.)
Deactivating this options makes it possible to
circumvent the default OS X behavior of using
points. Windows on HiDPI resolutions won't open
in double the size anymore and videos are display
in their native resolution when windowed.
Fixes#3716
- Change connector selection to accept human readable names (such as
eDP-1, HDMI-A-2) rather than arbitrary numbers.
- Change GPU selection to accept GPU number rather than device paths.
- Merge connector and GPU selection into one --drm-connector.
- Add support for --drm-connector=help.
- Add support for --drm-* in EGL backend.
- Refactor KMS; reduce state sharing across drm_common.
Rename the text subtitle options from --sub-text- to --sub-
and --ass- options to --sub-ass-.
The intention is to common sub options to prefixed --sub-
and special ASS option be seen as a special version of sub options.
The OSD options that work like the --sub- options are still named
--osd-.
Man page updated including a short note about renamed --sub-text-*
and --ass-* options to --sub-* and --sub-ass-*.
Seems like this confused users quite often.
Instead of --profile=pseudo-gui, --player-operation-mode=pseudo-gui now
has to be used to invoke pseudo GUI mode. The old way still works, and
still behaves in the old way.
A recent change merged the window-scaler option and property, but forgot
that the option is float for some reason, while the property uses
double. This led to undefined behavior. Fix it by changing the option
to double too.
Don't access MPOpts directly, and always use the new m_config.h
functions for accessing them in a thread-safe way.
The goal is eventually removing the mpv_global.opts field, and the
demuxer/stream-layer specific hack that copies MPOpts to deal with
thread-safety issues.
This moves around a lot of options. For one, we often change the
physical storage location of options to make them more localized,
but these changes are not user-visible (or should not be). For
shared options on the other hand it's better to do messy direct
access, which is worrying as in that somehow renaming an option
or changing its type would break code reading them manually,
without causing a compilation error.
And introduce a global option which does this. Or more precisely, this
deprecates the global wasapi and coreaudio options, and adds a new one
that merges their functionality. (Due to the way the sub-option
deprecation mechanism works, this is simpler.)
Instead of requiring each VO or AO to manually add members to MPOpts and
the global option table, make it possible to register them automatically
via vo_driver/ao_driver.global_opts members. This avoids modifying
options.c/options.h every time, including having to duplicate the exact
ifdeffery used to enable a driver.
Whitelisting supported codecs is (probably) still better than just
allowing everything, given the weird FFmpeg API. I'm also assuming
Libav doesn't even have the codec ID, but I didn't check.
Also add a --teletext-page option, since otherwise it decodes every
teletext page and shows them in succession.
And yes, we can't use av_opt_set_int() - instead we have to set it as
string. Because FFmpeg's option system is terrible.
vo_opengl sub-option were always rather annoying to handle. It seems
better to make them global options instead. This is simpler and easier
to use. The only disadvantage we are aware of is that it's not clear
that many/all of these new global options work with vo_opengl only.
--vo=opengl-hq is also deprecated.
There is extensive compatibility with the old behavior. One exception is
that --vo-defaults will not apply to opengl-hq (though with opengl it
still works). vo-cmdline is also dysfunctional and will be removed in a
following commit.
These changes also affect opengl-cb.
The update mechanism is still rather inefficient: it requires syncing
with the VO after each option change, rather than batching updates.
There's also no granularity (video.c just updates "everything", and if
auto-ICC profiles are enabled, vo_opengl.c will fetch them on each
update).
Most of the manpage changes were done by Niklas Haas <git@haasn.xyz>.
This is still rather basic.
run_reconfig() and run_control() update the options because it's needed
for panscan (and other video scaling options), and fullscreen, border,
ontop updates. In the old model, these options could be accessed only
while both playback thread and VO threads were locked (i.e. during
synchronous calls like vo_control()), so this should be sufficient in
order not to miss any updates. In the future, a more fine-grained update
mechanism could be added to handle these updates "exactly".
x11_common.c contains an evil hack, as I see no reasonable way to handle
this properly. The VO thread can't "lock" the main thread, so this is
not simple.
Now options are accessible through the property list as well, which
unifies them to a degree.
Not all options support runtime changes (meaning affected components
need to be restarted for the options to take effects). Remove from the
manpage those properties which are cleanly mapped to options anyway.
From the user-perspective they're just options available through the
property interface.
Just a minor refactor along the planned option change. This commit will
make it easier to update (i.e. copy) the VO options without copying
_all_ options. For now, behavior should be equivalent, though.
(The VO options were put into a separate struct quite early - when all
global variables were removed from the source code. It wasn't clear
whether the separate struct would have any actual purpose, but it seems
it will now. Awesome, huh.)
Normally, OSD can be disabled with --osd-level=0. But this also disables
terminal OSD, and some users want _only_ the terminal OSD. Add
--video-osd=no, which essentially disables the video OSD.
Ideally, it should probably be possible to control terminal and video
OSD levels independently, but that would require separate OSD timers
(and other state) for both components, so don't do it. But because the
current situation isn't too ideal, add a threat to the manpage that
might be changed in the future.
Fixes#3387.
The --image-display-duration option controls how long an image is
displayed. It's also possible to display the image forever (until manual
user interaction stops playback).
With this, the core drops the old method to "drain" video (i.e. waiting
for the last frame duration on end of playback). Instead, we reuse
MPContext.time_frame. The old mechanism was disabled for non-images
anyway.
Fixes#3425.
This commit adds an --audio-channel=auto-safe mode, and makes it the
default. This mode behaves like "auto" with most AOs, except with
ao_alsa. The intention is to allow multichannel output by default on
sane APIs. ALSA is not sane as in it's so low level that it will e.g.
configure any layout over HDMI, even if the connected A/V receiver does
not support it. The HDMI fuckup is of course not ALSA's fault, but other
audio APIs normally isolate applications from dealing with this and
require the user to globally configure the correct output layout.
This will help with other AOs too. ao_lavc (encoding) is changed to the
new semantics as well, because it used to force stereo (perhaps because
encoding mode is supposed to produce safe files for crap devices?).
Exclusive mode output on Windows might need to be adjusted accordingly,
as it grants the same kind of low level access as ALSA (requires more
research).
In addition to the things mentioned above, the --audio-channels option
is extended to accept a set of channel layouts. This is supposed to be
the correct way to configure mpv ALSA multichannel output. You need to
put a list of channel layouts that your A/V receiver supports.
mixer.c didn't really deserve to be separate anymore, as half of its
contents were unnecessary glue code after recent changes. It also
created a weird split between audio.c and af.c due to the fact that
mixer.c could insert audio filters. With the code being in audio.c
directly, together with other code that unserts filters during runtime,
it will be possible to cleanup this code a bit and make it work like the
video filter code.
As part of this change, make the balance code work like the volume code,
and add an option to back the current balance value. Also, since the
balance semantics are unexpected for most users (panning between the
audio channels, instead of just changing the relative volume), and there
are some other volumes, formally deprecate both the old property and the
new option.
Drop the code for switching the volume options and properties between
af_volume and AO volume controls. interface-changes.rst mentions the
changes in detail.
Do this because this was exceedingly complex and had other problems as
well. It was also very hard to test. It's just not worth the trouble.
Some leftovers like AOCONTROL_HAS_PER_APP_VOLUME will be removed at a
later point.
Fixes#3322.
Add --taskbar-progress command line option and property which controls taskbar
progress indication rendering in Windows 7+. This option is on by default and
can be toggled during playback.
This option does not affect the creation process of ITaskbarList3. When the
option is turned off the progress bar is just hidden with TBPF_NOPROGRESS.
Closes#2535
Flag that is set by default. Reseting it will result in mpv trying to fit
client area with video instead of the whole window with border and
decorations on the screen.
Marked as (Windows only) for now until it's implemented on other platforms.
See --lavfi-complex option.
This is still quite rough. There's no support for dynamic configuration
of any kind. There are probably corner cases where playback might freeze
or burn 100% CPU (due to dataflow problems when interaction with
libavfilter).
Future possible plans might include:
- freely switch tracks by providing some sort of default track graph
label
- automatically enabling audio visualization
- automatically mix audio or stack video when multiple tracks are
selected at once (similar to how multiple sub tracks can be selected)
This is probably the 3rd time the user-visible behavior changes. This
time, switch back because not normalizing seems to be the more expected
behavior from users.
Requested. It works like --sub-paths. This will also load audio files
from a "audio" sub directory in the config file (because the same code
as for subtitles is used, and it also had such a feature).
Fixes#2632.
wm4
Dan Oscarsson
Akemi
pavelxdd
rr-
David Logie
maniak1349