This commit allows to use the AV_PIX_FMT_DRM_PRIME newly introduced
format in ffmpeg that allows decoders to provide an AVDRMFrameDescriptor
struct.
That struct holds dmabuf fds and information allowing zerocopy rendering
using KMS / DRM Atomic.
This has been tested on RockChip ROCK64 device.
It never worked. It relied on some obscure texture format to provide the
equivalent of GL_RG or GL_LUMINANCE_ALPHA, but no hardware seemed to
report support for it ever. No idea what's the correct way to do this.
On D3D11 it exists, of course.
(Actually I'd like to remove the whole VO.)
Another legacy annoyance. The only place where packed YUV is still
important is slightly older Apple hardware or drivers, which require
it for efficient hardware decoding.
For vo_opengl and vo_direct3d, these are supported in a generic way.
For vf_vapoursynth, we could probably map its VSFormat struct in a
generic way, but for now do some bullshit.
vf_eq.c actually loses support for these formats. We could add generic
support too (anything that has 8 bit planes will work), but why bother.
The filter is deprecated anyway.
Add something that allows is to extract the component order from various
RGBA formats. In fact, also handle YUV, GBRP, and XYZ formats with this.
It introduces a new struct mp_regular_imgfmt, that hopefully will
eventually replace struct mp_imgfmt_desc. The latter is still needed by
a lot of code though, especially generic code. Also vo_opengl still uses
the old one, so this commit is sort of incomplete.
Due to its genericness, it's also possible that this commit introduces
rendering bugs, or accepts formats it shouldn't accept.
The problem with fmt-conversion.h is that "lucabe", who disagreed with
LGPL, originally wrote it. But it was actually rewritten by "reimar"
later. The original switch statement was replaced with a lookup table.
No code other than the imgfmt2pixfmt() function signature survives.
Neither the format pairs (PIXFMT<->IMGFMT), nor the concept of mapping
them, can be copyrighted.
So changing the license should be fine, because reimar and all other
authors involved with the new code agreed to LGPL.
We also don't consider format pairs added later as copyrightable.
(The direct-mapping idea mentioned in the "Copyright" file seems
attractive, and I might implement in later anyway.)
Likewise, there might be some format names added to img_format.h, which
are not covered by relicensing agreements. These all affect "later"
additions, and they follow either the FFmpeg PIXFMT naming or some other
pre-existing logic, so this should be fine.
The latest 375.xx nvidia drivers add support for P016 output
surfaces. In combination with an ffmpeg change to return those
surfaces, we can display them.
The bulk of the work is related to knowing which format you're
dealing with at the right time. Once you know, it's straight forward.
Nvidia's "NvDecode" API (up until recently called "cuvid" is a cross
platform, but nvidia proprietary API that exposes their hardware
video decoding capabilities. It is analogous to their DXVA or VDPAU
support on Windows or Linux but without using platform specific API
calls.
As a rule, you'd rather use DXVA or VDPAU as these are more mature
and well supported APIs, but on Linux, VDPAU is falling behind the
hardware capabilities, and there's no sign that nvidia are making
the investments to update it.
Most concretely, this means that there is no VP8/9 or HEVC Main10
support in VDPAU. On the other hand, NvDecode does export vp8/9 and
partial support for HEVC Main10 (more on that below).
ffmpeg already has support in the form of the "cuvid" family of
decoders. Due to the design of the API, it is best exposed as a full
decoder rather than an hwaccel. As such, there are decoders like
h264_cuvid, hevc_cuvid, etc.
These decoders support two output paths today - in both cases, NV12
frames are returned, either in CUDA device memory or regular system
memory.
In the case of the system memory path, the decoders can be used
as-is in mpv today with a command line like:
mpv --vd=lavc:h264_cuvid foobar.mp4
Doing this will take advantage of hardware decoding, but the cost
of the memcpy to system memory adds up, especially for high
resolution video (4K etc).
To avoid that, we need an hwdec that takes advantage of CUDA's
OpenGL interop to copy from device memory into OpenGL textures.
That is what this change implements.
The process is relatively simple as only basic device context
aquisition needs to be done by us - the CUDA buffer pool is managed
by the decoder - thankfully.
The hwdec looks a bit like the vdpau interop one - the hwdec
maintains a single set of plane textures and each output frame
is repeatedly mapped into these textures to pass on.
The frames are always in NV12 format, at least until 10bit output
supports emerges.
The only slightly interesting part of the copying process is that
CUDA works by associating PBOs, so we need to define these for
each of the textures.
TODO Items:
* I need to add a download_image function for screenshots. This
would do the same copy to system memory that the decoder's
system memory output does.
* There are items to investigate on the ffmpeg side. There appears
to be a problem with timestamps for some content.
Final note: I mentioned HEVC Main10. While there is no 10bit output
support, NvDecode can return dithered 8bit NV12 so you can take
advantage of the hardware acceleration.
This particular mode requires compiling ffmpeg with a modified
header (or possibly the CUDA 8 RC) and is not upstream in ffmpeg
yet.
Usage:
You will need to specify vo=opengl and hwdec=cuda.
Note that hwdec=auto will probably not work as it will try to use
vdpau first.
mpv --hwdec=cuda --vo=opengl foobar.mp4
If you want to use filters that require frames in system memory,
just use the decoder directly without the hwdec, as documented
above.
We now have a video filter that uses the d3d11 video processor, so it
makes no sense to have one in the VO interop code. The VO uses it for
formats not directly supported by ANGLE (so the video data is converted
to a RGB texture, which ANGLE can take in).
Change this so that the video filter is automatically inserted if
needed. Move the code that maps RGB surfaces to its own inteorp backend.
Add a bunch of new image formats, which are used to enforce the new
constraints, and to automatically insert the filter only when needed.
The added vf mechanism to auto-insert the d3d11vpp filter is very dumb
and primitive, and will work only for this specific purpose. The format
negotiation mechanism in the filter chain is generally not very pretty,
and mostly broken as well. (libavfilter has a different mechanism, and
these mechanisms don't match well, so vf_lavfi uses some sort of hack.
It only works because hwaccel and non-hwaccel formats are strictly
separated.)
The RGB interop is now only used with older ANGLE versions. The only
reason I'm keeping it is because it's relatively isolated (uses only
existing mechanisms and adds no new concepts), and because I want to be
able to compare the behavior of the old code with the new one for
testing. It will be removed eventually.
If ANGLE has NV12 interop, P010 is now handled by converting to NV12
with the video processor, instead of converting it to RGB and using the
old mechanism to import that as a texture.
This commit adds the d3d11va-copy hwdec mode using the ffmpeg d3d11va
api. Functions in common with dxva2 are handled in a separate decode/d3d.c
file. A future commit will rewrite decode/dxva2.c to share this code.
This is a pretty major rewrite of the internal texture binding
mechanic, which makes it more flexible.
In general, the difference between the old and current approaches is
that now, all texture description is held in a struct img_tex and only
explicitly bound with pass_bind. (Once bound, a texture unit is assumed
to be set in stone and no longer tied to the img_tex)
This approach makes the code inside pass_read_video significantly more
flexible and cuts down on the number of weird special cases and
spaghetti logic.
It also has some improvements, e.g. cutting down greatly on the number
of unnecessary conversion passes inside pass_read_video (which was
previously mostly done to cope with the fact that the alternative would
have resulted in a combinatorial explosion of code complexity).
Some other notable changes (and potential improvements):
- texture expansion is now *always* handled in pass_read_video, and the
colormatrix never does this anymore. (Which means the code could
probably be removed from the colormatrix generation logic, modulo some
other VOs)
- struct fbo_tex now stores both its "physical" and "logical"
(configured) size, which cuts down on the amount of width/height
baggage on some function calls
- vo_opengl can now technically support textures with different bit
depths (e.g. 10 bit luma, 8 bit chroma) - but the APIs it queries
inside img_format.c doesn't export this (nor does ffmpeg support it,
really) so the status quo of using the same tex_mul for all planes is
kept.
- dumb_mode is now only needed because of the indirect_fbo being in the
main rendering pipeline. If we reintroduce p->use_indirect and thread
a transform through the entire program this could be skipped where
unnecessary, allowing for the removal of dumb_mode. But I'm not sure
how to do this in a clean way. (Which is part of why it got introduced
to begin with)
- It would be trivial to resurrect source-shader now (it would just be
one extra 'if' inside pass_read_video).
Some VOs had support for these - remove them.
Typically, these formats will have only some use in cases where using
RGB software conversion with libswscale is faster than letting the
VO/GPU do it (i.e. almost never). For the sake of testing this case,
keep IMGFMT_RGB565. This is the least messy format, because it has no
padding/alpha bits with unknown semantics.
Note that decoding to these formats still works. We'll let libswscale
repack the data to whatever the VO in use can take.
This removes the need to define IMGFMT_GBRAP, which fixes compilation
with the current Libav release.
This also makes it automatically pick up a GBRP format with the same bit
width. (Unfortunately, it seems libswscale does not support conversion
to AV_PIX_FMT_GBRAP16, so our code falls back to 8 bit, removing
precision for video covered by subtitles in cases this code is used.)
Also, when the source video is e.g. 10 bit YUV, upsample to 16 bit.
Whether this is good or bad, it fixes behavior with alpha. Although I'm
not sure if the alpha range is really correct ([0,2^16-1] vs.
[0,255*256]). Keep in mind that libswscale doesn't even agree with the
way we do it.
This actually treats destination alpha correctly, and gives much better
results than before. I don't know if this is perfectly correct yet,
though. Slight difference with vo_opengl behavior suggests it might not
be.
Note that this does not affect VOs with true alpha support. vo_opengl
does not use this code at all, and does the alpha calculations in OpenGL
instead.
The computation of the tex_mul variable was broken in multiple ways.
This variable is used e.g. by debanding for moving expansion of 10 bit
fixed-point input to normalized range to another stage of processing.
One obvious bug was that the rgb555 pixel format was broken. This format
has component_bits=5, but obviously it's already sampled in normalized
range, and does not need expansion. The tex_mul-free code path avoids
this by not using the colormatrix. (The code was originally designed to
work around dealing with the generally complicated pixel formats by only
using the colormatrix in the YUV case.)
Another possible bug was with 10 bit input. It expanded the input by
bringing the [0,2^10) range to [0,1], and then treating the expanded
input as 16 bit input. I didn't bother to check what this actually
computed, but it's somewhat likely it was wrong anyway. Now it uses
mp_get_csp_mul(), and disables expansion when computing the YUV matrix.
Adds support for AV_PIX_FMT_GBRP9, AV_PIX_FMT_GBRP10, AV_PIX_FMT_GBRP12,
AV_PIX_FMT_GBRP14, AV_PIX_FMT_GBRP16, AV_PIX_FMT_GBRAP, and
AV_PIX_FMT_GBRAP16.
(Not that it matters, because nobody uses these anyway.)
VideoToolbox is preferred. Now that FFmpeg released 2.8, there's no
reason to support VDA anymore. In fact, we had a bug that made VDA not
useable with older FFmpeg versions in some newer mpv releases.
VideoToolbox is supported even on slightly older OSX versions, and if
not, you still can run mpv without hw decoding.
This affects vo_opengl_cb in particular: it'll most likely auto-load
VDA, and then the VideoToolbox decoder won't work. And everything fails.
This is mainly caused by FFmpeg using separate pixfmts for the _same_
thing (CVPixelBuffers), simply because libavcodec's architecture demands
that hwaccel backends are selected by pixfmts. (Which makes no sense,
but now we have the mess.)
So instead of duplicating FFmpeg's misdesign, just change the format to
our own canonical one on the image output by the decoder. Now the GL
interop code is exactly the same for VDA and VT, and we use the VT name
only.
VDA is being deprecated in OS X 10.11 so this is needed to keep hwdec working.
The code needs libavcodec support which was added recently (to FFmpeg git,
libav doesn't support it).
Signed-off-by: Stefano Pigozzi <stefano.pigozzi@gmail.com>
This requires FFmpeg git master for accelerated hardware decoding.
Keep in mind that FFmpeg must be compiled with --enable-mmal. Libav
will also work.
Most things work. Screenshots don't work with accelerated/opaque
decoding (except using full window screenshot mode). Subtitles are
very slow - even simple but huge overlays can cause frame drops.
This always uses fullscreen mode. It uses dispmanx and mmal directly,
and there are no window managers or anything on this level.
vo_opengl also kind of works, but is pretty useless and slow. It can't
use opaque hardware decoding (copy back can be used by forcing the
option --vd=lavc:h264_mmal). Keep in mind that the dispmanx backend
is preferred over the X11 ones in case you're trying on X11; but X11
is even more useless on RPI.
This doesn't correctly reject extended h264 profiles and thus doesn't
fallback to software decoding. The hw supports only up to the high
profile, and will e.g. return garbage for Hi10P video.
This sets a precedent of enabling hw decoding by default, but only
if RPI support is compiled (which most hopefully it will be disabled
on desktop Linux platforms). While it's more or less required to use
hw decoding on the weak RPI, it causes more problems than it solves
on real platforms (Linux has the Intel GPU problem, OSX still has
some cases with broken decoding.) So I can live with this compromise
of having different defaults depending on the platform.
Raspberry Pi 2 is required. This wasn't tested on the original RPI,
though at least decoding itself seems to work (but full playback was
not tested).
Simply clamp off the U/V components in the colormatrix, instead of doing
something special in the shader.
Also, since YA8/YA16 gave a plane_bits value of 16/32, and a colormatrix
calculation overflowed with 32, add a component_bits field to the image
format descriptor, which for YA8/YA16 returns 8/16 (the wrong value had
no bad consequences otherwise).
If video output and VO don't support the same format, a conversion
filter needs to be insert. Since a VO can support multiple formats, and
the filter chain also can deal with multiple formats, you basically have
to pick from a huge matrix of possible conversions.
The old MPlayer code had a quite naive algorithm: it first checked
whether any conversion from the list of preferred conversions matched,
and if not, it was falling back on checking a hardcoded list of output
formats (more or less sorted by quality). This had some unintended side-
effects, like not using obvious "replacement" formats, selecting the
wrong colorspace, selecting a bit depth that is too high or too low, and
more.
Use avcodec_find_best_pix_fmt_of_list() provided by FFmpeg instead. This
function was made for this purpose, and should select the "best" format.
Libav provides a similar function, but with a different name - there is
a function with the same name in FFmpeg, but it has different semantics
(I'm not sure if Libav or FFmpeg fucked up here).
This also removes handling of VFCAP_CSP_SUPPORTED vs.
VFCAP_CSP_SUPPORTED_BY_HW, which has no meaning anymore, except possibly
for filter chains with multiple scale filters.
Fixes#1494.
These formats are still supported; you just can't reference them via a
defined constants directly. They are now handled via the generic
passthrough.
(If you want to use such a format, you either have to add the entry
back, or use AV_PIX_FMT_* directly.)
This is a rather radical change: instead of maintaining a whitelist of
FFmpeg formats we support, we automatically support all formats.
In general, a format which doesn't have an explicit IMGFMT_* name will
be converted to a known format through libswscale, or will be handled
by code which can treat pixel formats in a generic way using the pixel
format description, like vo_opengl.
AV_PIX_FMT_UYYVYY411 is a special-case. It's packed YUV with chroma
subsampling by 4 in both directions. Its component order is documented
as "Cb Y0 Y1 Cr Y2 Y3", meaning there's one UV sample for 4 Y samples.
This means each pixel uses 1.5 bytes (4 pixels have 1 UV sample, so
4 bytes + 2 bytes). FFmpeg can actually handle this format with its
generic mechanism in an extremely awkward way, but it doesn't work for
us. Blacklist it, and hope no similar formats will be added in the
future.
Currently, the AV_PIX_FMT_*s allowed are limited to a numeric value of
500. More is not allowed, and there are some fixed size arrays that need
to contain any possible format (look for IMGFMT_END dependencies).
We could have this simpler by replacing IMGFMT_* with AV_PIX_FMT_*
through the whole codebase. But for now, this is better, because we
can compensate for formats missing in Libav or older FFmpeg versions,
like AV_PIX_FMT_RGB0 and others.
bstr.c doesn't really deserve its own directory, and compat had just
a few files, most of which may as well be in osdep. There isn't really
any justification for these extra directories, so get rid of them.
The compat/libav.h was empty - just delete it. We changed our approach
to API compatibility, and will likely not need it anymore.
There is no standard mechanism for detecting endianess. Doing it at
compile time in a portable way is probably hard. Doing it properly
with a configure check is probably hard too. Using the endian
definitions in <sys/types.h> (usually includes <endian.h>, which is
not available everywhere) works under circumstances, but the previous
commit broke it on OSX.
Ideally all code should be endian dependent, but that is not possible
due to the dependencies (such as FFmpeg, some video output APIs, some
audio output APIs).
Create a header osdep/endian.h, which contains various fallbacks.
Note that the last fallback uses libavutil; however, it's not clear
whether AV_HAVE_BIGENDIAN is a public symbol, or whether including
<libavutil/bswap.h> really makes it visible. And in fact we don't want
to pollute the namespace with libavutil definitions either. Thus it's
only the last fallback.
This affects packed RGB formats up to 16 bits per pixel. The old mplayer
names used LSB-to-MSB order, while FFmpeg (and some other libraries) use
MSB-to-LSB.
Nothing should change with this commit, i.e. no bit order or endian bugs
should be added or fixed. In some cases, the name stays the same, even
though the byte order changes, e.g. RGB8->BGR8 and BGR8->RGB8, and this
affects the user-visible names too; this might cause confusion.
These suffixes are annoying when they're redundant, so strip them
automatically. On little endian machines, always strip the "le" suffix,
and on big endian machines vice versa (although I don't think anyone
ever tried to run mpv on a big endian machine).
Since pixel format strings are returned by a certain function and we
can't just change static strings, use a trick to pass a stack buffer
transparently. But this also means the string can't be permanently
stored by the caller, so vf_dlopen.c has to be updated. There seems
to be no other case where this is done, though.
Integrate it with the existing surface allocator in vdpau.c. The changes
are a bit violent, because the vdpau API is so non-orthogonal: compared
to video surfaces, output surfaces use a different ID type, different
format types, and different API functions.
Also, introduce IMGFMT_VDPAU_OUTPUT for VdpOutputSurfaces wrapped in
mp_image, rather than hacking it. This is a bit cleaner.
The most user visible change is that "420p" is now displayed as
"yuv420p". This is what FFmpeg uses (almost), and is also less confusing
since "420p" is often confused with "420 pixels vertical resolution".
In general, we return the FFmpeg pixel format name. We still use our own
old mechanism to keep a list of exceptions to provide compatibility for
a while.
Also, never return NULL for image format names. If the format is unset
(0/IMGFMT_NONE), return "none". If the format has no name (probably
never happens, FFmpeg seems to guarantee that a name is set), return
"unknown".
They were used by ancient libavcodec versions. This also removes the
need to distinguish vdpau image formats at all (since there is only
one), and some code can be simplified.
Image formats used to be FourCCs, so unsigned int was better. But now
it's annoying and the only difference is that unsigned int is more to
type than int.
We got a crash in libavutil when encoding with Y8 (GRAY8). The reason
was that libavutil was copying an Y8 image allocated by us, and expected
a palette. This is because GRAY8 is a PSEUDOPAL format. It's not clear
what PSEUDOPAL means, and it makes literally no sense at all. However,
it does expect a palette allocated for some formats that are not
paletted, and libavutil crashed when trying to access the non-existent
palette.
Lionel CHAZALLON
Aman Gupta
wm4
Philip Langdale
Kevin Mitchell
Niklas Haas
Sebastien Zwickert
Marcin Kurczewski