Conflicts:
.gitignore
bstr.c
cfg-mplayer.h
defaultopts.c
libvo/video_out.c
The conflict in bstr.c is due to uau adding a bstr_getline function in
commit 2ba8b91a97. This function already existed in this branch.
While uau's function is obviously derived from mine, it's incompatible.
His function preserves line breaks, while mine strips them. Add a
bstr_strip_linebreaks function, fix all other uses of bstr_getline, and
pick uau's implementation.
In .gitignore, change vo_gl3_shaders.h to use an absolute path
additional to resolving the merge conflict.
Add support for using libavcodec decoders that do not have entries in
codecs.conf. This is currently only used with demux_lavf, and the
codec selection is based on codec_id returned by libavformat. Also
modify codec-related terminal output somewhat to make it use
information from libavcodec and avoid excessively long default output.
The new any-lavc-codec support is implemented with codecs.conf entries
that invoke vd_ffmpeg/ad_ffmpeg without directly specifying any
libavcodec codec name. In this mode, the decoders now instead select
the libavcodec codec based on codec_id previously set by demux_lavf
(if any). These new "generic" codecs.conf entries specify "status
buggy", so that they're tried after any specific entries with
higher-priority status.
Add new directive "anyinput" to codecs.conf syntax. This means the
entry will always match regardless of fourcc. This is used for the
above new codecs.conf entries (so the driver always gets to decide
whether to accept the input, and will fail init() if it can't find a
suitable codec in libavcodec). Remove parsing support for the obsolete
codecs.conf directive "cpuflags". This directive has not had any
effect and has not been used in default codecs.conf since many years
ago.
Shorten codec-related terminal output. When using libavcodec decoders,
show the libavcodec long_name field rather than codecs.conf "info"
field as the name of the codec. Stop showing the codecs.conf entry
name and "vfm/afm" name by default, as these are rarely needed;
they're now in verbose output only. Show "VIDEO:" line at VO
initialization rather than at demuxer open. This didn't really belong
in demuxer code; the new location may show more accurate values (known
after decoder has been opened) and works right if video track is
changed after initial demuxer open.
The vd.c changes (primarily done for terminal output changes) remove
round-to-even behavior from code setting dimensions based on aspect
ratio. I hope nothing depended on this; at least the even values were
not consistently guaranteed anyway, as the rounding code did not run
if the video file did not specify a nonzero aspect value.
The player can read codec mapping (codecs.conf) from an external file
or use embedded defaults. Before, the defaults were stored in the
player binary in the form of final already-parsed data structures.
Simplify things by storing the text of the codecs.conf file instead,
and parse that at runtime the same way an external file would be
parsed.
To create the previous parsed form, the build system first compiled a
separate binary named "codec-cfg", which parsed etc/codecs.conf and
then wrote the results as a C data structure that could be compiled
into the program. The new simple conversion of codecs.conf into a C
string is handled by the new script TOOLS/file2string.py.
After removing the codec-cfg binary, HOST_CC is no longer used for
anything. Remove the --host-cc configure option and associated logic.
Also remove the codec2html and codec-cfg-test functionality. Building
those was already broken and nobody cared.
There was a broken 3-character-long "fourcc" entry in etc/codecs.conf.
This happened to be accepted before but triggered a parse error after
the changes. Remove the broken entry and make the parsing functions
explicitly test for this error.
Support for this is rather simple, and some combinations of modifiers
and keys don't work. For example, Ctrl+Alt+character is not supported,
because Windows doesn't emit a WM_CHAR in this case.
Also add support for the pause and print screen keys. Remove the
pointless KEY_CTRL translation. Remove KEY_CTRL altogether, because it
was not clear what it was actually supposed to mean.
There were some slight differences between what input.conf mapped, and
what was in input.c def_cmd_binds[]. Make them match.
Add some minor documentation improvements in input.cfg.
Also remove double comments ('##'), because they were confusing.
Something like the OSD menu functionality could be useful. However the
current implementation has several problems and would require a
relatively large amount of work to get into good shape. As far as I
know there are few users of the existing functionality. Nobody is
working on the existing code and keeping it compiling at all while
changing other code would require extra work. So delete the menu code
and some related code elsewhere that's used by nothing else.
Add option --ass-vsfilter-aspect-compat and corresponding property
ass_vsfilter_aspect_compat. The setting controls whether to enable the
emulation of traditional VSFilter behavior where subtitles are
stretched if the video is anamorphic (previously always enabled for
native SSA/ASS subtitles). Enabled by default. Add 'V' as a new
default keybinding to toggle the property.
Revise desktop file.
Split Name entry into Name and GenericName entries.
This is according to the Desktop Entry Specification.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@33540 b3059339-0415-0410-9bf9-f77b7e298cf2
Revise desktop file.
Make slightly revised Catalan Name entry the GenericName entry.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@33541 b3059339-0415-0410-9bf9-f77b7e298cf2
Add German GenericName entry to desktop file and revise German Comment entry.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@33542 b3059339-0415-0410-9bf9-f77b7e298cf2
Make French and Italian Comment entries in desktop file GenericName entries.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@33543 b3059339-0415-0410-9bf9-f77b7e298cf2
Remove Spanish and Chinese Comment entries from desktop file.
There are no GenericName entries for Spanish and Chinese and
it's uncertain whether the Comment entries are OK.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@33544 b3059339-0415-0410-9bf9-f77b7e298cf2
Add X-GNOME-FullName entries to desktop file.
According to the Desktop Entry Specification, the "full name" should be built
from Name and GenericName. While some desktop environments do this (like KDE),
GNOME doesn't and uses its own key instead.
This closes Bugzilla #1680.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@33545 b3059339-0415-0410-9bf9-f77b7e298cf2
Add Japanese entries to desktop file.
Translation by committer.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@33546 b3059339-0415-0410-9bf9-f77b7e298cf2
Add Italian Comment entry to desktop file.
Translation by Giorgio Vazzana, mywing81 gmail com.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@33547 b3059339-0415-0410-9bf9-f77b7e298cf2
Add French Comment entry to desktop file.
Translation by Etienne Buira, etienne.buira free fr.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@33548 b3059339-0415-0410-9bf9-f77b7e298cf2
Selecting the colorspace to output from a decoder is done in the
function mpcodecs_config_vo(). Add a new version of this function,
mpcodecs_config_vo2(), that allows the decoder to specify a list of
candidate colorspaces instead of always using a hardcoded list
specified in the codecs.conf entry. If the codecs.conf entry has any
"out" lines then those still take priority and the decoder-provided
list (if any) is ignored. Make vd_ffmpeg provide a list of the
colorspaces it's willing to output. Remove "out" lines from most
entries for libavcodec video decoders in codecs.conf, so that the
automatic values are now used instead.
Due to libavcodec changes vo_xvmc would have needed some modifications
to keep working. However, I think there's little real demand for XvMC,
so I'll just drop XvMC support. XvMC only supported MPEG-2, making it
of very limited usefulness nowadays, plus the vo_xvmc implementation
was not high quality and never worked particularly well or reliably
anyway.
VDPAU hardware decoding does not support colorspaces other than 4:2:0.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@33096 b3059339-0415-0410-9bf9-f77b7e298cf2
Add the various decoders to codecs.conf and increase the maximum
number of buffered pts in stheader.h (apparently CrystalHD can have
very high decoder lag).
Patch by Philip Langdale, philipl overt org
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@33095 b3059339-0415-0410-9bf9-f77b7e298cf2
Support 'lpcm' in mov files, has audible (clipping?) artefacts on some
systems.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@33075 b3059339-0415-0410-9bf9-f77b7e298cf2
Support 32bit big endian float pcm in aiff.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@33076 b3059339-0415-0410-9bf9-f77b7e298cf2
Audio with all codec tags other than 0x2000 was byte-swapped, while
only "dnet" should be.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@33028 b3059339-0415-0410-9bf9-f77b7e298cf2
Support audio in Leitch/Harris' VR native stream format (LXF).
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@32990 b3059339-0415-0410-9bf9-f77b7e298cf2
Support dvvideo in Leitch/Harris' VR native stream format (LXF).
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@32991 b3059339-0415-0410-9bf9-f77b7e298cf2
At least for Wing Commander 4 files, -demuxer lavf is needed to
play XAN DPCM audio (while Wing Commander 3 avi plays fine with
-demuxer avi, although it also contains the video codec we call "XAN
wc4").
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@32894 b3059339-0415-0410-9bf9-f77b7e298cf2
Delete mp3lib which has been the default mp3 decoder until now. In
addition to being an unnecessary embedded library it now fails to
compile correctly with the new gcc-4.6, producing noise.
After the deletion the default decoder priority for mp3 will be first
libmpg123 (a newer version of the code that mp3lib was based on) if
available, then ffmp3float which should be available in all normal
compiles. I think that some tweaking may be required as these decoder
alternatives get wider testing, but any problems should be solvable
and there should be no need for mp3lib.
add apco and ap4h fourcc to prores decoder
add ai55 and ai15 fourcc to h264 docoders
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@32843 b3059339-0415-0410-9bf9-f77b7e298cf2
There were multiple files specific to Zoran support, and they also
depended on internal FFmpeg headers (so it would probably have been
hard to get them to compile now even if you tried). It's obsolete now,
so just drop the whole mess.
Also move the profiles to the bottom of the example configuration file
as the original remarks in the file suggested.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@32754 b3059339-0415-0410-9bf9-f77b7e298cf2
* hr-seek:
input: add default keybindings Shift+[arrow] for small exact seeks
input: support bindings with modifier keys for X input
core: audio: make ogg missing audio timing workaround more complex
core: add support for precise non-keyframe-limited seeks
core: add struct for queued seek info
commands: add generic option -> property wrapper
options: add "choice" option type, use for -pts-association-mode
core: remove looping in update_video(), modify command handling a bit
core: seek: use accurate seek mode with audio-only files
core: avoid using sh_video->pts as "current pts"
libvo: register X11 connection fd in input event system
core: timing: add special handling of long frame intervals
core: move central play loop to a separate function
Conflicts:
DOCS/tech/slave.txt
Add support for binding commands to modifier+key combinations like
"Shift+Left" or "Ctrl+Alt+x", and support reading such combinations
from the output window of X VOs.
The recognized modifier names are Shift, Ctrl, Alt and Meta. Any
combination of those and then a non-modifier key name, separated by
'+', is accepted as a key name in input.conf. For non-special keys
that produce characters shift is ignored as a modifier. For example
"A" is handled as a key without modifiers even if you use shift to
write the capital letter; 'a' vs 'A' already distinguishes the
combinations with a normal keymap, and having separate 'a', 'Shift+A'
and 'A' (written with caps lock for example) would bring more
confusion than benefit.
Currently reading the modifier+key combinations is only supported in
the output window of those VOs that use x11_common.c event
handling. It's not possible to input the key combinations in other VOs
or in a terminal window.
Add support for decoding Avid DNxHD through the QuickTime component.
This is needed for the 10-bit variant which the FFmpeg decoder does not
support (unfortunately both use the same FourCC).
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@32649 b3059339-0415-0410-9bf9-f77b7e298cf2
Bump codecs.conf version.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@32650 b3059339-0415-0410-9bf9-f77b7e298cf2
change dnxhd to qtdnxhd. consistant with all other quicktime decoders
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@32658 b3059339-0415-0410-9bf9-f77b7e298cf2
FFmpeg's AAC decoder is much faster than libfaad2. The only known
exception is libfaad2 compiled in fixed-point mode on systems with
slow FPUs. Now that LATM support in FFmpeg is complete, FFmpeg's AAC
decoder has a similar feature set as libfaad2. This leaves no reason
not to use FFmpeg by default.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@32605 b3059339-0415-0410-9bf9-f77b7e298cf2
For FFmpeg codecs YV12 should always be in the supported format
lists if I420 is.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@32593 b3059339-0415-0410-9bf9-f77b7e298cf2
fflatm seems to be working, whereas external faad does not work at all
with latm (internal does).
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@32585 b3059339-0415-0410-9bf9-f77b7e298cf2
Also move libfaad codecs.conf entry into the same position as in svn
(no functionality change since ffaac is marked buggy so only faad is
used by default regardless or order).
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@32571 b3059339-0415-0410-9bf9-f77b7e298cf2
add binary codecs for fourcc: IMM4, LZOC, DIRC, MHFY, MSA1
map vvvc fourcc to ffh264
works on the single vvvc sample from uncommon codecs list
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@31983 b3059339-0415-0410-9bf9-f77b7e298cf2
Found by the Debian QA tool 'lintian'
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@31913 b3059339-0415-0410-9bf9-f77b7e298cf2
reintroduce typo in genres.h that was fixed fixed r31913 to match the id3v2 spec
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@31920 b3059339-0415-0410-9bf9-f77b7e298cf2
Remove copy of old and ugly libgsm code and wrapper.
Decoding these formats is supported via FFmpeg both natively and
through libgsm.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@31657 b3059339-0415-0410-9bf9-f77b7e298cf2
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@31664 b3059339-0415-0410-9bf9-f77b7e298cf2
Currently not working since MPlayer requires edge emulation support.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@31542 b3059339-0415-0410-9bf9-f77b7e298cf2
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@31520 b3059339-0415-0410-9bf9-f77b7e298cf2
Place AUDIO_AAC_LATM definition next to AUDIO_AAC.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@31521 b3059339-0415-0410-9bf9-f77b7e298cf2
DirectShow codec).
Required changes:
- codecs.conf entry (of course).
- Allow opening files with “.col” in the file name, just like “vp3” and “.fpf”
already was allowed. (CineForm expects to be able to do this, presumably
for some color management code.)
- In registry.c, fake a few registry keys that the codec expects the installer
to have written. Also, change a few magic numbers (0, 2) to the appropriate
constants (ERROR_SUCCESS, ERROR_FILE_NOT_FOUND) where appropriate, so the code
is easier to follow.
SMP works fine, but seemingly performs suboptimally (e.g., on my dual-core
laptop, CineForm performs better if I lie to it and tell it I have four cores).
I don't know if this is inherent in the codec, or some inefficiency in the
emulated synchronization primitives.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@31196 b3059339-0415-0410-9bf9-f77b7e298cf2
for consitently naming all ffmpeg codecs
requested by compn
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@30977 b3059339-0415-0410-9bf9-f77b7e298cf2
This is a tentative change to give the decoder more testing;
it can always be reverted in short order if it turns out suboptimal.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@30918 b3059339-0415-0410-9bf9-f77b7e298cf2
FFmpeg now has an AMR-NB decoder, this avoids name clashes.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@30917 b3059339-0415-0410-9bf9-f77b7e298cf2
are in place.
Add codecs.conf entry for both codecs, and qt_comp.h entry for ProRes
(not used except for debugging, so mainly for completeness). Both work
with -demuxer mov only, as all other QuickTime binary codecs.
AIC support is for OS X only, and untested.
Split out from a patch Andrew Wason (r e c t a l o g i c <at> rectalogic
<dot> com) posted in June.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@30901 b3059339-0415-0410-9bf9-f77b7e298cf2
change ffsipr to working (and first choice by default) in codecs.conf
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@30318 b3059339-0415-0410-9bf9-f77b7e298cf2
add ffmpeg sipr / acelp.net decoder as buggy until 16k is supported
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@30274 b3059339-0415-0410-9bf9-f77b7e298cf2
This is meant as a test to see if we can possibly remove mp3lib at some point.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@30265 b3059339-0415-0410-9bf9-f77b7e298cf2
wm4
Uoti Urpala
harklu
compn
ib
cehoyos
Grigori Goronzy
reimar
Uoti Urpala
diego
siretart
sesse
attila
conrad
kostya