For some codecs, we need to invoke a codec parser (because libavcodec
will run into trouble otherwise). This was done based on the Matroska
codec field.
But this ignores handling of vfw-muxed files, which use a pseudo-codec
to signal presence of vfw structures, which we must unmangle to get the
real codec. Handle this by rearranging the code.
This fixes at least mp3-in-mkv for vfw-muxed files; typically old files.
This message can happen a lot for mkv files which index clusters in the
seekhead (which is also broken non-sense, but that's a different story).
Also remove a duplicate define from matroska.h.
The code could as well be in demux.c, but it's better to avoid
accidental clashes with demux_lavf.c.
FFmpeg provides no way yet to map a mime type to a codec, so do it
manually. (It _can_ map a mime type to an "input format", but not a
codec.)
Fixes#1374.
The most awesome codec, not.
The actual code for svq3 is actually just the part that checks for
MKV_V_QUICKTIME (no other QT-muxed codecs are supported). The rest is
minor refactoring, that actually improves the code in general.
This is just enough to support the 2 svq3-in-mkv sample files I have.
All of this is basically due to how MPlayer's codecs.conf worked. It
had a demuxer-interface based an AVI, using FourCCs and data structures
found in AVI. FourCCs were used to map streams to decoders. For codecs
not supported by AVI, "MPlayer internal" FourCCs were made up.
codec_tags.c is there to bridge demuxers written against the old API to
the mpv one. By now, only demux_mkv.c needs this (because demux_mkv is
the only serious demuxer left - preferably, we should use libavformat
for mkv too, but I can't see this happening any time soon, because
libavformat _still_ doesn't support segment linking). But the codec
tables are full of weird stuff automatically extracted from the old
codecs.conf tables. Most of it isn't needed for mkv.
Remove all custom tags, readd those used by demux_mkv.c internally
(see vinfo and mkv_audio_tag tables). The rest is handled by the
tables provided by libavformat, which includes AVI and QT tags.
It was more complicated than necessary.
The behavior changes slightly. Now it might pass through extradata when
it didn't before (hopefully harmless), and doesn't fail with an error if
extradata is not available, even though it's needed (harmless, will fail
either way).
The if branch has a weak check to test whether the codec_id is the short
ID, and handles the long IDs in the else branch. The long IDs are all
longer than 12 bytes long, so hardcoding the string offset to get the
trailing part of the name makes sense. But the if condition checks for
another thing, which could get the else branch run even if the codec_id
is short.
Fix the bogus control flow and check if the codec_id is long enough. One
of these checks could be considered redundant, but include them both for
defensive coding.
Do a minimal check on data read with stream_peek(). This could help with
probing from unseekable streams in some situations. (We could check the
entire EBML and Matroska headers, but probably not worth the trouble. We
could also seek back to the start, which demux.c doesn't do, but which
would work usually - also not worth the trouble.)
Make the changes started in commit c827ae5f more eloborate, and provide
an option to control the amount of data read before the seek-target. To
achieve this, rewrite the loop that finds the lowest still acceptable
target cluster. It is now searched by time instead of file position. The
behavior (both with and without preroll option) may be different from
before this change, although it shouldn't be worse.
The change demux_mkv_read_cues() fixes a bug: when seeking after playing
normally, the code would erroneously assume that durations are set. This
doesn't happen if the first operation after loading was a seek instead
of playback.
Revert commit 24e52f66; even though the old beheavior doesn't make sense
(as the commit message assured), it turns out that this works better:
typically, it means preroll will start from the previous video key frame
(the video CUE index will contain clusters with video key frames only),
which often coincides with subtitle changes. Thus the old behavior is
actually better.
Change the code that uses CueDuration elements. Instead of merely
checking whether preroll should be done, find the first cluster that
needs to be read to get all subtitle packets. (The intention is to
compensate for the enlarged preroll cluster-range due to reverting
commit 24e52f66.)
This considered only index entries that were for the same track ID as
the track used for seeking. This doesn't make much sense for preroll;
it'll just possibly skip clusters, and select an earlier cluster.
One possible negative side-effect is that the preroll might be too tight
now, and miss subtitle packets more often.
The demuxer has a hack to seek to the cluster before the target cluster
in order to "catch" subtitle lines that start before the seek target,
but overlap with the video after the seek target.
Avoid this hack if the cue index indicates that there are no overlapping
subtitle packets that can be caught by seeking to the previous cluster.
Nothing is done with them yet. This is preparation for the following
commit.
CueRelativePosition isn't even saved anywhere, because I don't intend to
use it. (Too messy for no gain.)
Instead of indexing only 1 packet per cluster (which is enough for
working seeking), add every packet to the index.
Since on seek, we go through every single index entry, this probably
makes seeking slower. On the other hand, this code is used for files
without index only (e.g. incomplete files), so it probably doesn't
matter much.
Preparation for the following commits.
This mechanism was introduced for Opus, and allows correct skipping of
"preroll" data, as well as discarding trailing audio if the file's
length isn't a multiple of the audio frame size.
Not sure how to handle seeking. I don't understand the purpose of the
SeekPreRoll element.
This was tested with correctness_trimming_nobeeps.opus, remuxed to mka
with mkvmerge v7.2.0. It seems to be correct, although the reported file
duration is incorrect (maybe a mkvmerge issue).
Instead of defining a separate data structure in the core.
For some odd reason, demux_chapter exported the chapter time in
nano-seconds. Change that to the usual timestamps (rename the field
to make any code relying on this to fail compilation), and also remove
the unused chapter end time.
Makes it behave slightly better for VP9. This is also the behavior
libavformat has.
Also while we're at it, don't set duration except for the first packet.
Normally we don't use the duration except for subtitles (which are never
parsed or "laced"), so this should make no observable difference.
See previous commits. This finally replaces directly reading the file
data into a struct with reading them manually. In theory this is more
portable (no alignment issues and other things). For the most part,
it's nice seeing this gone.
MPlayer traditionally did this because it made sense: the most important
formats (avi, asf/wmv) used Microsoft formats, and many important
decoders (win32 binary codecs) also did. But the world has changed, and
I've always wanted to get rid of this thing from the codebase.
demux_mkv.c internally still uses it, because, guess what, Matroska has
a VfW muxing mode, which uses these data structures natively.
This inserts an automatic conversion filter if a Matroska file is marked
as 3D (StereoMode element). The basic idea is similar to video rotation
and colorspace handling: the 3D mode is added as a property to the video
params. Depending on this property, a video filter can be inserted.
As of this commit, extending mp_image_params is actually completely
unnecessary - but the idea is that it will make it easier to integrate
with VOs supporting stereo 3D mogrification. Although vo_opengl does
support some stereo rendering, it didn't support the mode my sample file
used, so I'll leave that part for later.
Not that most mappings from Matroska mode to vf_stereo3d mode are
probably wrong, and some are missing.
Assuming that Matroska modes, and vf_stereo3d in modes, and out modes
are all the same might be an oversimplification - we'll see.
See issue #1045.
In the else branch pict_type is always 3, so pict_type != 3 is always
false. (Note that I have no idea of what it was supposed to do and it is
just an equivalent of the old behaviour.)
bstr.c doesn't really deserve its own directory, and compat had just
a few files, most of which may as well be in osdep. There isn't really
any justification for these extra directories, so get rid of them.
The compat/libav.h was empty - just delete it. We changed our approach
to API compatibility, and will likely not need it anymore.
Something like "char *s = ...; isdigit(s[0]);" triggers undefined
behavior, because char can be signed, and thus s[0] can be a negative
value. The is*() functions require unsigned char _or_ EOF. EOF is a
special value outside of unsigned char range, thus the argument to the
is*() functions can't be a char.
This undefined behavior can actually trigger crashes if the
implementation of these functions e.g. uses lookup tables, which are
then indexed with out-of-range values.
Replace all <ctype.h> uses with our own custom mp_is*() functions added
with misc/ctype.h. As a bonus, these functions are locale-independent.
(Although currently, we _require_ C locale for other reasons.)
Some of these might be security relevant.
The RealAudio code was especially bad. I'm not sure if all RealAudio
stuff still plays correctly; I didn't have that many samples for
testing. Some checks might be unnecessary or overcomplicated compared
to the (obfuscated) nature of the code.
CC: @mpv-player/stable
Also clarify the semantics.
It seems --idx didn't do anything. Possibly it used to change how the
now removed legacy demuxers like demux_avi used to behave. Or maybe
it was accidental.
--forceidx basically becomes --index=force. It's possible that new
index modes will be added in the future, so I'm keeping it
extensible, instead of e.g. creating --force-index.
While I'm not very fond of "const", it's important for declarations
(it decides whether a symbol is emitted in a read-only or read/write
section). Fix all these cases, so we have writeable global data only
when we really need.
