Adds support for adding directories to the playlist in addition to
files. The propertiy `directory-mode` controls if directories get added.
Recursive directory loading will get added in a later commit.
Directories get sorted after files to behave the same way mpv
behaves when it loads directories directly.
The GNOME Nautilus file manager supports browsing of dav:// and davs:// links only. Additionally, dav:// and davs:// are also types of webdav links. Therefore, adding an "or" operation to include support for dav:// and davs:// links.
Adds catmull_rom as an example for --scale in the user manual, alongside
a brief description of the filter.
catmull_rom was only exposed to users as an available filter through
--scale=help. However, catmull_rom is very often aliased as "Bicubic" in
other applications such as GIMP and VapourSynth, and is a relatively
popular resizing filter. The documentation lacked any description of
catmull_rom, outside of a brief mention of it in the --tscale section.
Packet duration is not necessarily related to the display time of the
subtitle. Use start/end_display_time fields as source of the timing.
Fixes subtitles with infinite duration that should be on screen until
next sub is displayed.
While this resolves limitations of lavc decoder crop, it also introduces
artifacts with some of the source files or hwdec.
Depending on chroma sampler it is possible to sample outside the decoder
crop area, pulling dirty pixels into the image. Some decoders left them
zeroed, not black. To fix that we would need specifc solution during
mapping of avframes.
As most of the files require the crop only in bottom/right area, the
AVCodecContext::apply_cropping works ok for those.
For all other cases that require more fancy cropping like 1440x1080+240+0
user can manually set `--vd-apply-cropping=no`.
Limitations of the lavc crop are explained here:
https://ffmpeg.org/doxygen/trunk/structAVCodecContext.html#a4745c7455c317272c4e139d6f369936c
Fixes: 826ce82cad
In the never ending quest of trying to satisfy every possible user
request for subtitle autoselection, I ended up redoing how
--subs-fallback-forced works. The old behavior had it as strictly a
fallback-type option when there were no lang matches, but now we can
make it an active part of compare_track and it works along with slang to
select the desired track. Since it's a three state option, the no option
still works to avoid selecting any forced subtitle tracks. The meaning
of always slightly changes to mean "only select forced subtitle tracks"
and yes remains essentially the same (no special priority given besides
the audio matching subtitle language case).
So strangely enough, estimated_vsync_interval is stored as a double but
nominal_vsync_interval is not and neither is the vsync_interval. Those
are stored as int64_t. This loss of precision can matter even in common
cases. For instance, take a typical 60 Hz monitor. Instead of 16666.6666
(repeating) being calculated as the vsync interval, you would get 16666
since the decimals are truncated. This is not really good at all and
affects the calculated speed values you get when using display sync. For
consistency and better precision, these should all be doubles just like
estimated_vsync_interval. Technically this means that we won't be able
to store as high of an integer value but such values would be absurdly
huge and never actually needed. Also estimated_vsync_interval already
can't handle such a case anyway.
Timestamps are converted from microsecond resolution timestamp, we don't
have more precision, so we have to account for that when comparing the
floating point values as them will slightly be off.
Fixes: #12327
Interrim solution, forwards compatible with new and backwards compatible
with old API. Eventually, we will want to discontinue the use of
deprecated pl_icc_params.save/load and pl_renderer_save/load, but that
requires minimum version bump.
Cropping by decoder has limitations with regards to aligment and hwdec.
It doesn't work to offset top left corner with hwdec and even with
software decoding it don't crop fully when resulting data would not be
aligned.
VO cropping is way more robust.
Setting `--video-crop=0x0+0+0` applies full frame crop, ignoring the
container one. Setting --video-crop=0 disables manual crop and restores
container one if it is available.
This makes it easier to apply crops without need to manually calc the
offset. I wanted for it to be top-left corner based, but maybe it was
not that good idea in retrospect.
Also rename scrw/scrh, since they don't refer to screen. It was copied
form m_geometry apply.
Third try is the charm? I stupidly missed that this option already
existed in my previous commits. Instead, add an auto value to it and
enable it by default for sd_lavc but not sd_ass. On my limited samples,
it seems to fix the gaps issue that can occur but without regressing
some duration timings for sub_lavc subtitles. Well hopefully anyway.
Fixes#12327.
Yet another bad idea. It turns out that there's already a sub-fix-timing
option which logic for this exact thing (overlaps/gaps) fixing. Also it
works better than this since it doesn't appear to artifically increase
sub duration either. Fixes#12327.
This reverts commit 725b631ec3.
mpv saves cache by default nowadays, but vo_gpu is pretty spammy and
saves a bunch of files per shader. If someone is using the non-XDG
config directory, this all gets dumped directly into ~/.mpv which isn't
so nice. Save it to a sub directory called "cache" instead (or
alternatively submit to your XDG overlords). For unfortunate reasons,
macOS uses XDG_CONFIG_HOME and has the same legacy fallback mechanism,
so this applies to it too.
We currently only allow specifying the Vulkan device to use by name. We
did this to avoid confusion around devices being enumerated in an
unpredictable order. However, there is a valid edge case where a system
may contain multiple devices of the same type - which means they will
have the same name, and so you can't control which one is used.
This change implements picking devices by UUID so that if names don't
work, you have some option available. As Vulkan 1.1 is a hard
requirement for libplacebo, we can just use UUIDs without conditional
checks.
Fixes#10898
In the previous change, I added the uuid files. In this change, we
check the libavutil version and if it's too old, we compile in our
local copy.
We have to change the include paths of the uuid code to find some other
libavutil headers, but nothing beyond that.
To avoid taking a dependency on ffmpeg 5.1 before we're ready (we need
a newer Ubuntu LTS release to drop ffmpeg 4.x support), ut not force us
to wait to add support for picking Vulkan devices by UUID, I'm copying
the uuid code from ffmpeg into mpv. It's one file with no private
dependencies, so it's easier to copy than to reimplement in any other
way.
Licence is LGPL so matches us.
We were over-enthusiastic when introducing --no-config into the
autocompletions. When autocompleting profiles, you actually need the
config, because that's where the profiles come from.
zsh is untested - I don't use it.
The old mplayer / zap style format is not fully standardized across
channel scanners, so autodetection may fail if the file name
does not indicate the delivery system.
While ZAP config files should contain strings in most fields,
their field number in the DVB-T / ISDBT case matches the number of fields
for VDR config files, and some channel list writers (namely, dvbv5-scan)
may insert "0" in unused string fields.
To disentangle such config files from real VDR config files,
add a check for the "INVERSION_" field which should always be filled.
dvb_get_channels is expected to append to an existing channel list.
For adapters supporting many delivery systems, a subsequent channel list
may turn up with a non-existent channel config, and the pointer
to the previously parsed channel list may be lost
(i.e. the list will be leaked and no channels detected).
Fix this by passing through the existing list (which may be NULL)
in case no new channels are found.
This is similar to DVB-T, but requires slightly different treatment
as there is no T/T2 differentiation.
Use a new channels.conf.isdbt file as channels config file.
Causes bad performance with interpolation because the changing hue angle
invalidates the mixing cache, as a result of libplacebo implementations
(specifically, the fact that this graph is drawn during the color
management process, instead of as a separate overlay).
Fix it by just hard-coding a particular, relatively interesting plane
(pi/4 approximately maps onto the red-blue axis).
Before this change, mpv used to get the total duration from
`avformat_find_stream_info` and used the per-track duration as a
fallback. This change reverses this order of preference.
The timestamps returned by `avformat_find_stream_info` are truncated or
rounded or floored (depending on the decoder) at the 6th decimal place.
For e.g. `avformat_find_stream_info` may return us a duration like
44.138667, whereas the duration we get from the per-track struct has a
higher degree of precision like 44.13866666666... and so on.
This caused various problems such as the playback_pts being a bigger
value than the duration, which would cause time-remaining to be a
negative value in some cases. Or cause you to reach a negative starting
timestamp when looping on an audio file with `gapless-audio`.
Moreover, we already skipped calling `avformat_find_stream_info` for
mp4, so we had already been utilizing this per-track fallback method for
finding the duration for mp4 files. It should be noted that while this
change is only required for audio-only formats, there is no harm in
doing this for videos as well.
There are way too many preexisting scripts that rely on this behavior
for video panning, like for example scripts that allow you to use mpv as
an image viewer. If this behavior is desired then it may be better to
add a new option for panning relative to the destination instead.
The restriction of video-pan-x/y being clamped to {-3, 3} also results
in the video being impossible to pan if it was zoomed in beyond a
certain degree.
This reverts commit 7d6f9e3739.
the osc currently allows for changing volume via scrolling when on top
of the volume icon. this does the same thing for the seekbar by allowing
seeking via scroll.
The default revert will always add 9 extra characters which means it
could go over the 72 character soft limit if the commit being reverted
has a long subject. We won't fuss about this so just shut up the lint in
this case.
