In debug mode the macro causes an assertion failure.
In release mode it works differently and tells the compiler that it can
assume the codepath will never execute. For this reason I was conversative
in replacing it, e.g. in mpv-internal code that exhausts all valid values
of an enum or when a condition is clear from directly preceding code.
The situation here is that HWND is always a 32-bit value but the
win32 API also accepts sign-extended values as valid. The trouble
starts when the numeric value is negative, as mpv ignores those.
Apparently this only happens after a while (related to uptime
or number of handles created), which meant this problem was rare.
addresses #10189
The only real reason this was ever supported is because it was
dramatically simpler than v4, so it was put in as an initial
implementation. Later, v4 support was added and we left v2 for
compatibility, but let's just drop it. Compositors all use v4 nowadays,
and v2 is significantly limited (no modifier support for example). It's
better to just remove this dead code for simplicity.
The watch-later mechanism has always unconditionally wrote start to
files to save the playback position. When this was later expanded to
watch-later-options, this logic was kept in place. But we don't actually
have to unconditionally write this and can allow users to remove the
option from the list if they want to. The start value still requires
some special handling; it should always be written if possible
regardless of the value changing. However, we can just place it within
the default set of options for watch-later-options so it can be removed
like any other.
So far there was no way to sync video to display and have audio sync to
video without changes in pitch.
With this option the audio does not get resampled (pitch change) and
instead the corrected audio speed is applied to audio filters.
Instead of choosing based on smallest deviation from set speed,
use the speed change from the smallest factor that does not
exceed `video-sync-max-video-change`.
Formatting the string on each comparison is wasteful.
Formatting strings beforehand and then comparing the already formatted
ones leads to a huge performance gain.
Commits 257dbdf06f uses a algorithm of splitting strings
into a table of number and string values to achieve natural sorting.
This approach works well in most cases, but it does not work well
in some specific scenarios.
Now let's implement natural sorting with a stronger algorithm.
Also fixes indentation.
Ref: 3cf323f3c4
Closes https://github.com/mpv-player/mpv/issues/8969
This was already returning true/false but the type was int. Also
simplify a few places in the wayland contexts where we can just return
the value of this function instead of doing redundant checks.
Instead of just returning true/false, it's better to have this function
cleanup itself. We can eliminate some redundant uninit calls elsewhere
in the code as well.
There's several functions that are used for initializing mpv on a
certain platform (x11, wayland, etc.). These currently are all int, but
they actually return 1 and 0 like a boolean. This gets a bit confusing
because actual vo preinit functions return 0 and -1 instead. Just make
these all bool instead and return true/false to make it clearer.
vk->surface is a handle and not a pointer, so assign VK_NULL_HANDLE.
This fixes the following build error on 32bit Windows when using clang for example,
which errors out when assigning a 32bit pointer to a 64bit integer:
../mpv-0.35.0/video/out/vulkan/utils.c:37:21:
error: incompatible pointer to integer conversion assigning to 'VkSurfaceKHR' (aka 'unsigned long long') from 'void *' [-Wint-conversion]
vk->surface = NULL;
^ ~~~~
This allows us to rebuild the manpages and html documentation only when
necessary. It is not necessary to manually keep the list of dependencies
up to date.
Unfortunately rst2pdf does not yet support this feature, see
https://github.com/rst2pdf/rst2pdf/issues/1108
In `new_demux_packet_from`, we initialise a new packet and allocate a
buffer which we copy the source data into. But I was then assigning
the original source pointer as the packet's buffer, rather than keeping
the newly allocated one. Whoops.
Without this change the same track encoded as Opus - which requires R128
tagging - and e.g. Vorbis with ReplayGain tagging have different volumes.
This is caused by ReplayGain 2 having a higher reference level of -18 dB
LUFS, while EBU R128 has a lower reference level of -23 dB LUFS.
For the results of gain application to match, the read EBU R128
values need to be boosted according to the difference in reference
levels.
Patch inspired by mpd's source code.
Similar to some other issues we've had with unprocessed compositor
events. When quitting mpv, there's two things we should be doing:
dispatching any last minute wayland events and then waiting for a
compositor reply. Luckily, there's already an internal helper for this
(renamed to wayland_dispatch_events for consistency) that we can use.
All of the special casing of wl->feedback becomes unneccesary and we can
remove this from vo_wayland_state with this method. Fixes#110022.
In the event of a failed wayland initalization, the display_fd is
actually 0 instead of -1 which would correctly indicate it doesn't
exist. Also move the fd check inside vo_wayland_dispatch_events since
that function shouldn't ever do anything if we don't actually have a
display fd.
We have a use_present bool that keeps track of whether or not to use
presentation time. However, the creation of the feedback listener
actually wasn't checking this and was instead checking for the existence
of wl->presentation. There's no point in always creating the
listener and feedback if mpv isn't actually going to use it. Just change
it to use_present instead.
e97819f88e corrected a special case
condition that lead to an out of bounds access if the total width
happened to be an integer multiple of SLICE_W (256) which could cause a
crash in software VOs. However, it turns out that the functions in this
file evaluate quite differently when using encoding mode (and presumably
libmpv as well according to reports although I could not independently
verify it).
The logic here gets complicated but what ends up happening is that, in
blend_overlay_with_video, the value of x + w can be greater than p->w in
certain cases in encoding mode. The x is the positional value of the
slice which remained unchanged from before, but w can take the full
value of SLICE_W (256) which is not necessarily correct. The width of
the final slice here should be the total remaining width. We can handle
this in mark_rect by simply always adjusting x1 of the last slice to be
equal to total width - SLICE_W * x so it can never extend beyond where
it should be. In practice, this value should be the maximum allowed
here. I'm not sure if the existing x1 value can possibly already be
lower than SLICE_W, but just MPMIN it to be on the safe side.
Fixes#10908.
[motivation]
Seeking on MacOS appears to be lagged when users connect
to wireless audio output (airpods for example).
This commit attempts to fixmpv-player/mpv#10270
[observation]
1. When using other media player (VLC to be exact) simultaneously,
the lagging on seek disappear. We could guess that the AudioDevice
is on some sort of "warm-up" state.
See mpv-player/mpv#9243 for detailed description.
2. `AudioOutputUnitStart` takes significant longer time after each seek
or pause/play when using wireless output devices compares to wired devices.
[rationale]
After investigate codes in ao_coreaudio.c, it appears that the the `stop`
function was used as `ao_driver.reset` function. Therefore every seek
and pause would call `AudioOutputUnitStop`.
It turns out that `ao_driver.reset` function is used in `ao_reset`.
And `ao_reset` function is used to clean up the state of current `ao`
so I think `AudioUnitReset` is more proper than `AudioOutputUnitStop`
under this semantics.
Since ao_coreaudio use pull base mechanism, audio playback behaviors
upon pause/seek could be handled by callback function
(streaming silence when paused) so there is no need to stop AudioUnit when resetting.
Therefore using `AudioUnitReset` as `ao_driver.reset` looks proper.
Additionally, after using proper reset, the AudioUnit that represents
hardware I/O devices doesn't need to be restart everytime seek/pause actions happen.
Restarting wireless devices simply takes longer in MacOS which is
the root cause of lagging observed by users when they seek or pause/play media.
[method]
Use `AudioUnitReset` for ao_driver.reset.
This change enables mpv to work in the WSL2 (WSLg) environment where
OpenGL is implemented on top of D3D12.
This reverts commit 149d98d244.
Mentioned OpenGL implementation (GDI Generic) in the original change
will be rejected by version check, so there is no need to handle it
manually.
Signed-off-by: Kacper Michajłow <kasper93@gmail.com>
Buffering ahead nonstop into the cache results in nonstop disk or network
activity to read stream data from wherever it may originate. Currently,
there's no way to configure the demuxer to back off once it's buffered
ahead enough data, since the cache limit will be perpetually not-reached as
a stream continues to play, until the entire stream is eventually buffered.
On a laptop with an i9-12900H with decoding performed by the iGPU,
watching a locally-saved 1080p video which hasn't been buffered into the
page cache consumes approximately 15 W even with caching enabled. When
configuring a hysteresis to make the demuxer back off, power consumption
drops to 9 W when watching the same video, resulting in a whopping 6 W of
power savings.
To make it possible to attain significant power savings via caching, add
a --demuxer-hysteresis-secs option to configure a hysteresis to make the
demuxer back off until there's only the configured number of seconds
remaining in the cache from the current playback position.
This feature is disabled by default.
mpv currently only recognizes jpg and png files named "AlbumArt",
"Album", "cover", etc. which are in the same folder as the audio files
as album/cover art and displays it when playing such audios.
This feature adds support for webp files following the same naming
scheme to be displayed as cover art for albums who have them.
Webp variations are lower in priority compared to jpg or png files.
Resolves: #11006
Since the modesetting driver now has TearFree support with integration into
xpresent, it's important that xpresent is used with the modesetting driver
to get the correct vsync timing when a frame is delayed by one vblank
interval due to a pending page-flip enqueued by a different entity. The
modesetting driver ensures that the xpresent extension reports the correct
presentation timing when TearFree is used; mpv just needs to listen to it.
Add the modesetting driver to the xpresent whitelist so mpv can get the
correct presentation completion timing when modesetting TearFree is used.
This is also helpful for when xpresent performs page flips directly in the
modesetting driver and a natural delay in the display pipeline causes a
page flip to be delayed by one vblank interval or more.
In the previous change, I replaced the callsites that used
`av_init_packet`, but there are a handful of places that use stack
allocated packets with no initialisation.
In one case, I just switched to heap allocation as it's only done once
per stream at most.
In the other case, I removed our usage of the AVPackets as a
convenience mechanism to transfer data into a heap allocated packet.
Instead, I inlined the data copying.
When a pull AO reaches reaches EOF then ao_read_data() will set
p->playing = false.
Because the ao is marked as not playing ao_set_pause(true) will not
reset the AO.
This keeps the output stream unintentionally open.
Fixes#9835
See https://sw.kovidgoyal.net/kitty/graphics-protocol/
This makes no attempt at querying terminal features or handling
terminal errors, as it would require mpv to pass the response codes
from the terminal to the vo instead of interpreting them as
keystrokes made by the user and acting very unpredictably.
Tested with kitty and konsole.
Fixes#9605
We ask users to freely share log files with us, which is usually
okay, unless a user has some unrelated and potentially embarrassing
files in their working directory. These would show up in the debug
level message output that --log-file enables.
Change the listing of potential external files to trace log level,
to save the users and the developers the embarrassment.
Ionen Wolkens
sfan5
Dudemanguy
Aaron Boxer
Max Dunbar
Christoph Heinrich
dyphire
Christoph Reiter
Thomas Weißschuh
Philip Langdale
Simon Ruderich
repojohnray
repojohnray
Li Chang
Kacper Michajłow
Sultan Alsawaf
Ron Shabi
Mia Herkt
Nicolas F
chen70