Allow the stream layer to report chapter times. Extend stream_dvd to do
this. I'm not 100% sure whether the re-used code is bug-free (because it
was used for slave-mode and/or debugging only).
MAke the frontend do time-based seeks when switching DVD chapters. I'm
not sure if there's a real reason STREAM_CTRL_SEEK_TO_CHAPTER exists
(maybe/hopefully not), but we will see.
Note that querying chapter times in demuxer_chapter_time() with the new
STREAM_CTRL_GET_CHAPTER_TIME could be excessively slow, especially with
the cache enabled. The frontend likes to query chapter times very often.
Additionally, stream_dvd uses some sort of quadratic algorithm to list
times for all chapters. For this reason, we try to query all chapters on
start (after the demuxer is opened), and add the chapters to the demuxer
chapter list. demuxer_chapter_time() will get the time from that list,
instead of asking the stream layer over and over again.
This assumes stream_dvd knows the list of chapters at the start, and
also that the list of chapters never changes during playback. This
seems to be true, and the only exception, switching DVD titles, is not
supported at runtime (and doesn't need to be supported).
Commit 4d14a42, a seemingly harmless change, introduced very bad cache
behavior when the cache isn't forked, such as on Windows, where it uses
threads. Apparently the cache code was designed for forking, and an
unknown obscure condition causes severe performance degradation if a
STREAM_CTRL is sent to the cache on every frame.
Since the cache code is literally insane (uses shared memory + fork(),
and has hacks to make it work with threads, is messed into the stream
code in extra-hacky ways), we just fix it by caching the STREAM_CTRL in
question.
This is also done for some other STREAM_CTRLs that are called on each
frame, such as playback duration. This indicates that the cache code has
some inherent problem with answering such requests in a timely matter,
and that there's no easy way around this.
(Even if the cache is eventually rewritten, these things will probably
have to be cached, otherwise you'd have to forcibly block until the
stream implementation is done with a blocking read. The real question
is why it worked fine with the forked cache, though.)
Will be needed to override the demuxer's start time reporting. We could
be lazy and special-case it since the result is always 0 for the streams
that care, but doing it properly is better.
DVD playback uses a demuxer that signals to the frontend that timestamp
resets are possible. This made the frontend calculate the OSD playback
position based on the byte position and the total size of the stream.
This actually broke DVD playback position display. Since DVD reports a
a linear playback position, we don't have to rely on the demuxer
reported position, so disable this functionality in case of DVD
playback. This reverts the OSD behavior with DVD to the old behavior.
When the cache fill status goes below a certain threshold, automatically
pause the player. When the cache is filled again, unpause again.
This is intended to help with streaming from http. It's better to pause
a while, rather than exposing extremely crappy behavior when packet
reads during decoding block the entire player.
In theory, we should try to increase the cache if underruns happen too
often. Unfortunately, changing the cache implementation would be very
hard, because it's insane code (forks, uses shared memory and "volatile"
etc.). So for now, this just reduces the frequency of the stuttering if
the network is absolutely too slow to play the stream in realtime.
This commit is separate from the previous one to separate our own
changes from changes merged from mplayer2 (as far as that was possible).
Make it easier for stream implementations to request being cached. Set
a default cache size in stream.c, and remove them from various stream
implementations. Only MS streaming support sets a meaningful cache size.
Make querying cache size saner. This reduces the amount of #ifdefs
needed.
Code enabling the cache by default for network streams did that by
modifying the value of the "cache" option. This wasn't sane, as
multiple streams may be created and all share the same options. Change
the code to not modify options but store data in the stream instance
instead.
Conflicts:
core/mplayer.c
demux/demux.c
stream/cache2.c
stream/network.c
stream/network.h
stream/pnm.c
stream/stream.c
stream/stream_rtp.c
Merged from mplayer2 commit e26070. Note that this doesn't solve any
actual bug, as the playlist crashing bug has been fixed before.
Since the global cache size option value is not overwritten anymore, the
option doesn't need to be restored on end of playback (M_OPT_LOCAL).
Update endpos each time libavformat asks for it.
Fixes playback of still downloading files to not stop before we
really reached the end.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@35107 b3059339-0415-0410-9bf9-f77b7e298cf2
Conflicts:
libmpdemux/demux_lavf.c
Change STREAM_CTRL_GET_SIZE argument type from off_t to
uint64_t.
Also fix the incorrect type of the uint64_res variable.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@35360 b3059339-0415-0410-9bf9-f77b7e298cf2
Conflicts:
libmpdemux/demux_lavf.c
libmpdemux/muxer_lavf.c
Note: also merges the "forgotten" cache support from r35107.
Finish renaming directories and moving files. Adjust all include
statements to make the previous commit compile.
The two commits are separate, because git is bad at tracking renames
and content changes at the same time.
Also take this as an opportunity to remove the separation between
"common" and "mplayer" sources in the Makefile. ("common" used to be
shared between mplayer and mencoder.)
Add new stream control command STREAM_CTRL_GET_CURRENT_TITLE for DVDs.
This provides the current title (aka track) number of a DVD.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@35263 b3059339-0415-0410-9bf9-f77b7e298cf2
Allow STREAM_CTRL_GET_NUM_TITLES with cache enabled.
This is missing in r34474.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@35258 b3059339-0415-0410-9bf9-f77b7e298cf2
Avoid sleeping 0 ms, this can cause sleep to be not called at all.
This will then cause long hangs e.g. when sleeping on single-CPU/core computers.
Should fix bug #2084.
Patch suggested by Visenri [visenri yahoo es]
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@35119 b3059339-0415-0410-9bf9-f77b7e298cf2
Previously, Matroska source files other than the initially opened one
were always accessed without caching. Enable cache for extra files
too. A separate cache process/thread is started for each file, which
is less than optimal but probably better than no caching if the user
explicitly enabled cache. This commit only implements caching for
Matroska ordered chapters (not for EDL timeline).
To build the timeline we need to demux the files in the current
directory to look for segments with matching uuid. This first demux is
done with no cache since we don't need to read a lot of the stream. If
the file is recognized as one of the needed sources it's reopened with
cache enabled.
Also move the stream_cache_size global variable to the options struct.
Conflicts:
cfg-mplayer.h
mplayer.c
stream/stream.h
timeline/tl_matroska.c
The <libavutil/avutil.h> stopped including <libavutil/common.h>
recursively in recent ffmpeg/libav git revisions. As a result, some
files no longer got needed definitions, causing a build failure.
Modify #include lines in various files to fix build with the latest
versions of ffmpeg/libav headers.
The main excuse for removing this is that LIVE555 deprecated the API
the mplayer implementation was using. The old API still seems to be
somewhat supported, but must be explicitly enabled at LIVE555
compilation, so mplayer won't always work on any user installation.
The implementation was also very messy, in C++, and FFmpeg support is
available as alternative.
Remove it completely.
Code cleanup: Use a stream_control instead of global functions to
get the language associate with a audio or subtitle stream from
the streaming layer.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@34736 b3059339-0415-0410-9bf9-f77b7e298cf2
Support showing the stream language with br:// playback.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@34737 b3059339-0415-0410-9bf9-f77b7e298cf2
Fix DVDs showing the subtitle language as "unknown"
for a long time.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@34777 b3059339-0415-0410-9bf9-f77b7e298cf2
Author: reimar
Note: heavily modified by wm4 for this fork of mplayer.
Remove variable that is only assigned but never used.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@34791 b3059339-0415-0410-9bf9-f77b7e298cf2
Allow using a cache size of up to 4 TB.
Obviously anything close to 4 GB will always fail
on 32 bit systems.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@34792 b3059339-0415-0410-9bf9-f77b7e298cf2
Replace off_t by int64_t in cache code.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@34793 b3059339-0415-0410-9bf9-f77b7e298cf2
Remove casts that are no longer necessary.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@34794 b3059339-0415-0410-9bf9-f77b7e298cf2
Fix header file after r34793.
Patch by Stephen Sheldon, sfsheldo gmail com.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@34802 b3059339-0415-0410-9bf9-f77b7e298cf2
Put #include <inttypes.h> into the header file where it should be.
Reported by Stephen Sheldon, sfsheldo gmail com.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@34798 b3059339-0415-0410-9bf9-f77b7e298cf2
Correct r34798.
The header only needs stdint.h while the C file needs inttypes.h.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@34799 b3059339-0415-0410-9bf9-f77b7e298cf2
Author: reimar
This avoid some strange differences in behaviour between -cache and -nocache.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@34461 b3059339-0415-0410-9bf9-f77b7e298cf2
cache2: fix seeking with e.g. flv files
This is a regression that was introduced in r34461.
Found and bisected by Anssi Hannula [anssi.hannula iki fi].
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@34575 b3059339-0415-0410-9bf9-f77b7e298cf2
cache2: print an error when streams behave in a way that the cache cannot handle
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@34576 b3059339-0415-0410-9bf9-f77b7e298cf2
Author: reimar
Make cache process detect when the main process disappeared and
make it exit on its own in that case.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@34371 b3059339-0415-0410-9bf9-f77b7e298cf2
Author: reimar
Mark two warnings that usually only indicate a performance issue as such.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@33955 b3059339-0415-0410-9bf9-f77b7e298cf2
Another attempt to make message easier to understand.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@33956 b3059339-0415-0410-9bf9-f77b7e298cf2
Author: reimar
While this was an interesting idea, it wasn't actually useful.
Basically it dumped the raw data (as requested by the demuxer) into a
file. The result is only useful if the file format was raw or maybe
some MPEG packet stream, but not with most modern file formats.
Some of the code, especially the dshow and windows codec loader parts,
are extremely hacky and likely full of bugs. The goal is merely getting
rid of warnings that could obscure more important warnings and actual
bugs, instead of fixing actual problems. This reduces the number of
warnings from over 500 to almost the same as when compiling on Linux.
Note that many problems stem from using the ancient wine-derived
windows headers. There are some differences to the "proper" windows
header. Changing the code to compile with the proper headers would be
too much trouble, and it still has to work on Unix.
Some of the changes might actually break compilation on legacy MinGW,
but we don't support that anymore. Always use MinGW-w64, even when
compiling to 32 bit.
Fixes some warnings in the win32 loader code on Linux too.
When handling STREAM_CTRL calls for the cached stream, do not modify
the return parameter if the underlying stream returns an error for the
operation.
Avoids issues with some places that don't check the return
value of stream_control.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@33802 b3059339-0415-0410-9bf9-f77b7e298cf2
Remove condition that is now always true.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@33803 b3059339-0415-0410-9bf9-f77b7e298cf2
Change code to allow STREAM_CTRL_GET_CURRENT_TIME with cache enabled.
Due to that time being from what is currently read into the cache it
is unfortunately somewhat inaccurate and unsmooth, however for streams
that do have stream timestamps it is till a lot better than going by
the demuxer alone.
In particular it fixes bug #1081, when starting a DVD with -chapter
following seeks would be relative to the start of the DVD instead
of the current position.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@33605 b3059339-0415-0410-9bf9-f77b7e298cf2
In practice this should not really make a difference, but
the code is not significantly worse and it is more correct.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@33435 b3059339-0415-0410-9bf9-f77b7e298cf2
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@33447 b3059339-0415-0410-9bf9-f77b7e298cf2
Ensure we always pass a buffer of at least sector size to the read
function. This is never an issue with streams that have actual
sectors, as the reads will always return a multiple of sector size and
the cache is always used in blocks of sector size. However the rtp
protocol misuses this so it can just assume it always has a
sufficiently large buffer available and thus fails without this extra
hack.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@33120 b3059339-0415-0410-9bf9-f77b7e298cf2
Convert cache_fill_status into a function so we always get the latest
state, not whatever it was after the last read.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@32818 b3059339-0415-0410-9bf9-f77b7e298cf2
Update PAUSED status line with cache fill status if it changed.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@32819 b3059339-0415-0410-9bf9-f77b7e298cf2
Change "cache not filling" warning to include a hint to increase the
cache size.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@32815 b3059339-0415-0410-9bf9-f77b7e298cf2
Make the file protocol read up to 64 KiB at once when the cache is used,
assuming that files will generally be readable with high bandwidth.
This should improve performance when playing e.g. from high-latency
network shares.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@32616 b3059339-0415-0410-9bf9-f77b7e298cf2
Add a stream_read_internal() function that reads directly into a given
buffer instead of the stream's internal one. Use this to read directly
into cache memory, avoiding a memcpy(). This requires also adding a
stream_seek_internal() as the normal seek function reads into the
stream's buffer.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@32559 b3059339-0415-0410-9bf9-f77b7e298cf2
If a specified key is pressed during playback, the current stream is
captured to a file, similar to what -dumpstream achieves.
original patch by Pásztor Szilárd, don tricon hu
Taken from the following svn commits, but with several fixes and
modifications (one obvious user-visible difference is that the default
key binding is 'C', not 'c'):
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@32524 b3059339-0415-0410-9bf9-f77b7e298cf2
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@32529 b3059339-0415-0410-9bf9-f77b7e298cf2
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@32530 b3059339-0415-0410-9bf9-f77b7e298cf2
Add sanity-check for sector size to avoid strange crashes if it is
too large.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@31914 b3059339-0415-0410-9bf9-f77b7e298cf2
Avoid STREAM_CTRL_SEEK_TO_TIME messing up the current position for stream
types which do not support it.
Fixes seeking in local flv files.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@31907 b3059339-0415-0410-9bf9-f77b7e298cf2
Signal() has an unavoidable race-condition on "broken by
backwards-compatibility" systems like Solaris. (Upon receiving a
signal, the handler is reset to SIG_DFL, thus a second signal will
kill the process. The problem could also be reduced by re-installing
the handler inside the handler, but there's still a race-condition and
the risk of the handler being called inside the handler).
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@31738 b3059339-0415-0410-9bf9-f77b7e298cf2
Should reduce issues with mp4/mov (playing those may involve a lot of
seeking inside the file).
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@31371 b3059339-0415-0410-9bf9-f77b7e298cf2
Change 'struct vf_instance' pointer arguments to more standard style
as in the subject. Also some other minor formatting fixes.
Patch by Diego Biurrun.
wm4
Uoti Urpala
reimar
ib
Stefano Pigozzi
mplayer-svn
wm4
Uoti Urpala
diego