Normally I use the OSC like this: not at all, but have a key binding
that does "cycle osc" to show it. And in that case, I don't really want
it to overlap the damn video.
I could use the zoom/pan options to move the video out of the way, but
this is also sort of annoying. Likewise, you could write a script or so
which does this automatically if the OSC appears, but that's still
annoying, and computing values for these options such that the video is
moved correctly is tricky.
So I added a bunch of options that set explicit video borders (previous
commit), and a option for the OSC to use them (this commit).
Disabled by default, since I'm afraid this is too awkward and
unpolished, especially with OSC default settings.
I'm also using "osc-visibility=always". Effectively, making the OSC
appear will box the video, and making it disappear (by unloading
osc.lua) will restore the video back to normal.
Semantics a bit questionable. This is done for the OSC (next commit),
and a comment added the manpage explicitly states this. Meaning this is
probably garbage and needs to revisit when the OSC changes and/or
someone wants to use this margin feature for something else.
Not sure about the subtitle thing. It's imaginable that someone uses
these options to create empty borders for subtitles on the bottom, so
subtitles should be located there. On the other hand, this gives a
rather unpolished user experience when using the (later added) OSC
feature to not overlap with the video. There's not much of a point if
the OSC still overlaps the video. However, I'm too lazy to think about
this, so it stays like it is.
--video-margin-ratio-left=0.2 --video-margin-ratio-right=0.9 (added in
the the next commit) will set f_w to inf, resulting in some garbage
being propagated. Later, the OSD margins are computed from values before
various sanity clamping is applied, which makes libass suffer from
bullshit values.
I'm very sure it's OK and more correct to compute the OSD margins using
the later values, but I'm not sure about that.
demux_packet.next should not be used outside of demux.c, and in this
case it's a packet that was just passed to demux.c from the outside.
demux_packet.stream is already set by the demuxer, and this is assured
by the add_packet_locked() caller.
We don't care much about this case, because backward playback can fail
terribly without a good way to detect it, so this was fine.
However, this froze in certain situations. Reading from a subtitle file
for which backward demuxing failed could make it get stuck in
demux_read_packet_async() in unthreaded mode. (That we don't support
backwards subtitle decoding anyway doesn't matter for this.)
So aggressively disable backward demuxing to prevent worse in these
situations. The behavior will still be awful, because the frontend is
still in backwards playback mode, but at least it won't freeze.
Somewhat similar to the old --cache-file, except for the demuxer cache.
Instead of keeping packet data in memory, it's written to disk and read
back when needed.
The idea is to reduce main memory usage, while allowing fast seeking in
large cached network streams (especially live streams). Keeping the
packet metadata on disk would be rather hard (would use mmap or so, or
rewrite the entire demux.c packet queue handling), and since it's
relatively small, just keep it in memory.
Also for simplicity, the disk cache is append-only. If you're watching
really long livestreams, and need pruning, you're probably out of luck.
This still could be improved by trying to free unused blocks with
fallocate(), but since we're writing multiple streams in an interleaved
manner, this is slightly hard.
Some rather gross ugliness in packet.h: we want to store the file
position of the cached data somewhere, but on 32 bit architectures, we
don't have any usable 64 bit members for this, just the buf/len fields,
which add up to 64 bit - so the shitty union aliases this memory.
Error paths untested. Side data (the complicated part of trying to
serialize ffmpeg packets) untested.
Stream recording had to be adjusted. Some minor details change due to
this, but probably nothing important.
The change in attempt_range_joining() is because packets in cache
have no valid len field. It was a useful check (heuristically
finding broken cases), but not a necessary one.
Various other approaches were tried. It would be interesting to list
them and to mention the pros and cons, but I don't feel like it.
Supposed to follow the standard function.
The standard function is not standard, but a GNU extension. Adding some
ifdef mess is pointless too - it has no advantages other than having a
mess, and not spotting implementation bugs in the emulation due to
running it only on "obscure" platforms (like Windows, so most computers
actually, except the developer's platform).
There is mkstemp(), which at least is in POSIX 2008. But it's 100%
useless, except in some obscure cases: it doesn't set O_CLOEXEC, nor can
you pass it to it. Without O_CLOEXEC, we'd leak the temporary file to
all child processes. (The fact that the file, which is expected to reach
double or tripple digit GB sizes, will be deleted only once all
processes unreference the FD, makes this sort of a big deal. You could
ftruncate() it, but that doesn't fix all the other problems.)
Why did POSIX standardize mkstemp() and O_CLOEXEC apparently at the same
time, but provided no way to pass O_CLOEXEC to mkstemp()? With the
introduction of O_CLOEXEC, they acknowledged that there's a need to
atomically set the FD_CLOEXEC flag when creating file descriptors.
(FD_CLOEXEC was standard before that, but setting it with fcntl() is
racy.) You're much more likely to need a temp file that is CLOEXEC
rather than the opposite, and even if they were somehow opposed to
CLOEXEC by default (such as for compat. reasons), surely POSIX could
have standardized mkostemp() too or instead.
And then there's the fact that this whole O_CLOEXEC mess is stupid.
Surely there would have been a better way to handle this, instead of
requiring adding O_CLOEXEC to almost ALL instances of open() in all code
that has been written ever. The justification for this is that the
historic default was wrong, and you can't change it (e.g. this won't
work: changing the behavior of exec() and not inherit the FD to the
child process, unless a hypothetical O_KEEP_EXEC flag is set).
But on the other hand, surely you could have introduced an exec()
variant which does close all FDs, except a whitelist of FDs passed to
it. Let's call it execve2(). In fact, I'm going to argue that exec()
call sites are the most aware of whether (and which) FDs to inherit.
Some programs even tried to explicitly iterate over all opened FDs and
explicitly close "unwanted" FDs (which of course was problematic for
other reasons), and such an execve2() call would have been the ideal
solution.
Maybe this proposed solution would have had problems too. But surely
revisiting and reviewing every exec*() call would have been simpler than
reviewing every open() call. And more importantly, having to extend
every damn library function that either calls open() or creates FDs in
some other way, like mkstemp().
What argument are there going to be against this? That there will be
library code that can't keep working correctly with processes that use
the "old" exec? Well, what about all my legacy library code that uses
open() incorrectly, and that will break no matter what?
Well, I'm not going to claim that I can come up with better solutions
than POSIX (generally or in this case), but this situation is ABSOLUTELY
ATROCIOUS. It makes win32 programming look attractive compared to POSIX,
that standard pandering to dead people from the past. (Note: not trying
to insult dead people.)
I'm not sure what POSIX is even doing. Anything useful? Doesn't look
like it to me. Are they paid? Why? They didn't even fix the locale mess,
nor do they intend to. I bet they're proud of discussing compatibility
to 70ies code day in and day out iwtohut ever producing anything useful.
What a load of crap. They seriously got to do better than this.
Oh, and my wrapper is probably buggy. Fortunately that doesn't matter.
Also I'm dumping this into io.h. Originally, io.h was just supposed to
replace broken implementation of standard functions by MinGW (and then
by Android), but whatever, just give a dumping ground for shit code.
Backwards demuxing usually seeks back back by a "random" amount (set by
a user option) when it needs new preceding packets. It turns out a past
change made these backwards seek amounts add up when it didn't need to
(i.e. subtracting the amount from the seek pos without properly
resetting it), which could possibly slow down playback as it went on.
The reason for this was that back_seek_pos was set for every stream on
every seek. This made the reset not affect other streams (in particular
streams which weren't used and never were reset, or which didn't reset
that often). But as the commit adding it showed, this is needed only to
set the initial position. So do that.
Fixes: "demux: fix initial backward demuxing state in some cases"
When packet appending sets the start of the range, it adjusts the range
by seek_preroll. Do this when packets are pruned from the start of the
range too.
(Yeah, seek_preroll handling is probably broken in some other cases. It
was halfhearted to begin with.)
The main thing this commit does is removing demux_packet.kf_seek_pts. It
gets rid of 8 bytes per packet. Which doesn't matter, but whatever.
This field was involved with much of seek range updating and pruning,
because it tracked the canonical seek PTS (i.e. start PTS) of a packet
range. We have to deal with timestamp reordering, and assume the start
PTS is the lowest PTS across all packets (not necessarily just the first
packet). So knowing this PTS requires looping over all packets of a
range (no, the demuxer isn't going to tell us, that would be too sane).
Having this as packet field was perfectly fine. I'm just removing it
because I started hating extra packet fields recently.
Before this commit, this value was cached in the kf_seek_pts field (and
computed "incrementally" when adding packets). This commit computes the
value on demand (compute_keyframe_times()) by iterating over the placket
list. There is some similarity with the state before 10d0963d85,
where I introduced the kf_seek_pts field - maybe I'm just moving in
circles. The commit message claims something about quadratic complexity,
but if the code before that had this problem, this new commit doesn't
reintroduce it, at least. (See below.)
The pruning logic is simplified (I think?) - there is no "incremental"
cached pruning decision anymore (next_prune_target is removed), and
instead it simply prunes until the next keyframe like it's supposed to.
I think this incremental stuff was only there because of very old code
that got refactored away before. I don't even know what I was thinking
there, it just seems complex. Now the seek range is updated when a
keyframe packet is removed.
Instead of using the kf_seek_pts field, queue->seek_start is used to
determine the stream with the lowest timestamp, which should be pruned
first. This is different, but should work well. Doing the same as the
previous code would require compute_keyframe_times(), which would
introduce quadratic complexity.
On the other hand, it's fine to call compute_keyframe_times() when the
seek range is recomputed on pruning, because this is called only once
per removed keyframe packet. Effectively, this will iterate over the
packet list twice instead of once, and with some locality. The same
happens when packets are appended - it loops over the recently added
packets once again. (And not more often, which would go above linear
complexity.)
This introduces some "cleverness" with avoiding calling
update_seek_ranges() even when keyframe packets added/removed, which is
not really tightly coupled to the new code, and could have been in a
separate commit.
Removing next_prune_target achieves the same as commit b275232141,
which is hereby reverted (stale is_bof flags prevent seeking before the
current range, even if the beginning of the file was pruned). The seek
range is now strictly computed after at least one packet was removed,
and stale state should not be possible anymore.
Range joining may over-allocate the index a little. It tried hard to
avoid this before by explicitly freeing the old index before creating a
new one. Now it iterates over the old index while adding the entries to
the new one, which is simpler, but may allocate twice the memory in the
worst case. It's not going to matter for anything, though.
Seeking will be slightly slower. It needs to compute the seek PTS values
across all packets in the vicinity of the seek target. The previous code
also iterated over these packets, but now it iterates one packet range
more.
Another minor detail is that the special seeking code for SEEK_FORWARD
goes away. The seeking code will now iterate over the very last packet
range too, even if it's incomplete (i.e. packets are still being
appended to it). It's fine that it touches the incomplete range, because
the seek_end fields prevent that anything particularly incorrect can
happen. On the other hand, SEEK_FORWARD can now consider this as seek
target, which the deleted code had to do explicitly, as kf_seek_pts was
unset for incomplete packet ranges.
Obviously doesn't sense with this order. The git history shows that this
comment was touched multiple times, without ever fixing it. It was
originally added in 2016, where the "for" was missing. Later, the "for"
was added, but to the wrong position.
What the fuck?
The old implementation didn't work for the OGG case. Discard the old
shit code (instead of fixing it), and write new shit code. The old code
was already over a year old, so it's about time to rewrite it for no
reason anyway.
While it's true that the old code appears to be broken, the main reason
to rewrite this is to make it simpler. While the amount of code seems to
be about the same, both the concept and the actual tag handling are
simpler. The result is probably a bit more correct.
The packet struct shrinks by 8 byte. That fact that it wasted 8 bytes
per packet for a rather obscure use case was the reason I started this
at all (and when I found that OGG updates didn't work). While these 8
bytes aren't going to hurt, the packet struct was getting too bloated.
If you buffer a lot of data, these extra fields will add up. Still quite
some effort for 8 bytes. Fortunately, it's not like there are any
managers that need to be convinced whether it's worth doing. The freedom
to waste time on dumb shit.
The old implementation attached the current metadata to each packet.
When the decoder read the packet, the packet's metadata was made
current. The new implementation stores metadata as separate list, and
requires that the player frontend tells it the current playback time,
which will be used to find the currently valid metadata. In both cases,
the objective was to correctly update metadata even if a lot of data is
buffered ahead (and to update them correctly when seeking within the
demuxer cache).
The new implementation is actually slightly more correct, because it
uses the playback time for the metadata lookup. Consider if you have an
audio filter which buffers 15 seconds (unfortunately such a filter
exists), then the old code would update the current title 15 seconds too
early, while the new one does it correctly.
The new code also simplifies mixing the 3 metadata sources (global, per
stream, ICY). We assume these aren't mixed in a meaningful way. The old
code tried to be a bit more "exact". I didn't bother to look how the old
code did this, but the new code simply always "merges" with the previous
metadata, so if a newer tag removes a field, it's going to stick around
anyway.
I tried to keep it simple. Other approaches include making metadata a
special sh_stream with metadata packets. This would have been
conceptually clean, but the implementation would probably have been
unnatural (and doesn't match well with libavformat's API anyway). It
would have been nice to make the metadata updates chapter points (makes
a lot of sense for the intended use case, web radio current song
information), but I don't think it would have been a good idea to make
chapters suddenly so dynamic. (Still an idea to keep in mind; the new
code actually makes it easier to work towards this.)
You could mention how subtitles are timed metadata, and actually are
implemented as sparse packet streams in some formats. mp4 implements
chapters as special subtitle stream, AFAIK. (Ironically, this is very
not-ideal for files. It would be useful for streaming like web radio,
but mp4 is extremely bad for streaming by design for other reasons.)
bla bla bla bla bla bla bla bla bla bla bla bla bla bla bla bla bla bla
bla bla bla bla bla bla bla bla bla bla bla bla bla bla bla bla bla bla
bla bla bla bla bla bla bla bla bla bla bla bla bla bla bla bla bla bla
bla bla bla bla bla bla bla bla bla bla bla bla bla bla bla bla bla bla
bla bla bla bla bla bla bla bla bla bla bla bla bla bla bla bla bla bla
bla bla bla bla bla bla bla bla bla bla bla bla bla bla bla bla bla bla
bla bla bla bla bla bla bla bla bla bla bla bla bla bla bla bla bla bla
bla bla bla bla bla bla bla bla bla bla bla bla bla bla bla bla bla bla
bla bla bla bla bla bla bla bla bla bla bla bla bla bla bla bla bla bla
bla bla bla bla bla bla bla bla bla bla bla bla bla bla bla bla bla bla
bla bla bla bla bla bla bla bla bla bla bla bla bla bla bla bla bla bla
bla bla bla bla bla bla bla bla bla bla bla bla bla bla bla bla bla bla
bla bla bla bla bla bla bla bla bla bla bla bla bla bla bla bla bla bla
bla bla bla bla bla bla bla bla bla bla bla bla bla bla bla bla bla bla
Some OGG web radio streams use timestamp resets when a new song starts
(you can find those Xiph's directory - other streams there don't show
this behavior). Basically, the OGG stream behaves like concatenated OGG
files, and "of course" the timestamps will start at 0 again when the
song changes. This is very inconvenient, and breaks the seekable demuxer
cache. In fact, any kind of seeking will break
This is more time wasted in Xiph's bullshit. No, having timestamp resets
by design is not reasonable, and fuck you. I much prefer the awful
ICY/mp3 streaming mess, even if that's lower quality and awful. Maybe it
wouldn't be so bad if libavformat could tell us WHERE THE FUCK THE RESET
HAPPENS. But it doesn't, and the randomly changing timestamps is the
only thing we get from its API.
At this point, demux_lavf.c is like 90% hacks. But well, if libavformat
applies this strange mixture of being clever for us vs. giving us
unfiltered garbage (while pretending it abstracts everything, and hiding
_useful_ implementation/low level details), not much we can do.
This timestamp linearizing would, in general, probably be better done
after the decoder, because then we wouldn't need to deal with timestamp
resets. But the main purpose of this change is to fix seeking within the
demuxer cache, so we have to do it on the lowest level.
This can probably be applied to other containers and video streams too.
But that is untested. Some further caveats are explained in the manpage.
Probably doesn't change anything, other than looking slightly better. In
theory, the common function has some stuff that makes it more likely
that timestamps round-trip through conversions properly, but I didn't
confirm that.
This may call memmove() with size==0 and a NULL data pointer. In
addition to this being UB with memmove(), I think it's UB to do
arithmetic on a NULL pointer too. Of course, this doesn't matter in
practice at all, and is just stupidity to torture programmers.
Remove the duplicated creation of the first range. Explicitly destroy
ranges, including the last one on final deinit.
It looks like this also fixes a leak of removed range structs, which was
never noticed because they're so small, and were freed on final deinit
due to having the demuxer as talloc parent.
This improves upon the previous commit too (that change should have
been part of it I guess). Sub-demuxers (demux_timeline only) now
automatically don't use the cache (like it was intended by the previous
commit). The cache is "initialized" (or disabled) last in the recursive
call chain, which is messy, but this sub demuxer stuff FUCKING SUCKS, as
mentioned in the previous commit message. This would be no problem if
the caching layer and actual demuxer implementations were separate.
Most of this change has no purpose. Might make (de-)initialization of
further cache exerpiments simpler.
It seems the so called demuxer cache wasn't really disabled for
sub-demuxers (timeline stuff). This was relatively harmless, since the
actual packet data was shared anyway via refcounting. But with the
addition of a mmap cache backend, this may change a lot.
So strictly disable any caching for sub-demuxers. This assumes that
users of sub-demuxers (only demux_timeline.c by now?) strictly use
demux_read_any_packet(), since demux_read_packet_async() will require
some minor read-ahead if a low level packet read returned a packet for a
different stream.
This requires some awkward messing with this fucking heap of trash. The
thing that is really wrong here is that the demuxer API mixes different
concepts, and sub-demuxers get the same API as decoders, and use the
cache code.
The demuxer cache tries to track the number of bytes allocated for the
cache. In addition to the packet queue, the seek index is another data
structure that roughly depends on the amount of packets cached. So the
index size should somehow be part of the total number of bytes tracking.
Until now, this was handled with KF_SEEK_ENTRY_WORST_CASE, basically a
shitty heuristic. It was a guess (and probably rather an upper bound
than a lower bound). The implementation details made it annoying, and it
was conceptually inaccurate too.
Change this, and instead simply add the index size to the total cache
size. This essentially makes it part of the backbuffer. It's nice that
this cleanly decouples it from the packet size tracking itself.
Since it's part of the backbuffer number of bytes now, packet pruning
can't necessarily free enough space in the backbuffer anymore. Before
this commit, the backbuffer consisted of packets only, so it was
possible to reduce its size to 0 by pruning all packets until the
decoder reader position, at which point a packet was accounted as
forward buffered. Now the index is added to this, and it can't be
pruned. Replace the assert() because of this changed invariant.
The conversion to string as the pretty printer returns it is
sometimes used on OSD. I think it's pretty odd that quantities below 1
KB are shown as number without suffix. So use "B" for them.
For orthogonality, allow the same for parsing. (Although strictly
speaking, this is not a requirement of the option API. Option parsers
don't need to accept pretty-printed strings.)
Someone who rams a knife into his own hand just to see what happens is
normally put in a psychiatric ward. But in software, this is acceptable
behavior. Programs are not supposed to crash just because a user did
something unreasonably dumb.
Switching tracks during backward playback is such a thing. It triggered
an assertion because the newly enabled stream was not properly
initialized for backward playback. Fix this, and make it actually work
(mostly; it still takes a "while" until playback recovers fully).
This actually makes some aspects of initialization slightly cleaner.
Track switching doesn't run reset_playback_state(), so a track enabled
at runtime during backward playback would lead to a messed up state.
This commit just does a bad code monkey fix to this. It feels like there
needs to be a much better way to propagate this state.
Not sure if this is bug-free. You _always_ make bugs when writing a
binary search from scratch (and such is the curse of C, though if I did
this in C++ it would probably end in blood). It seems to work though,
checking against the normal linear search.
It's slightly faster. Not much.
I wonder if the termination condition can be written in a nicer/elegant
way. I guess the fact that it's not a == predicate makes this slightly
messier?
The purpose of the seek index is to avoid having to iterate over the
full linked list of cached packets, which should speed up seeking. Until
now, there was an excuse of a seek index, that didn't really work.
The idea of the old index was nice: have a fixed number of entries (no
need to worry about exceeding memory requirements), which are
"stretched" out as the cache gets bigger. The size of it was 16 entries,
which in theory should speed up seeking by the factor 16, given evenly
spaced out entries. To achieve this even spacing, it attempted to "thin
out" the index by half once the index was full (see e.g. index_distance
field). In my observations this didn't really work, and the distribution
of the index entries was very uneven. Effectively, this did nothing. It
probably worked once and I can't be assed to debug my own shit code.
Writing new shit code is more fun.
Write new shit code for fun. This time it's a complete index. It's kept
in a ringbuffer (for easier LIFO style appending/removing), which is
resized with realloc if it becomes too small.
Actually, the index is not completely completely; it's still "thinned
out" by a hardcoded time value (INDEX_STEP_SIZE). This should help with
things like audio or crazy subtitle tracks (do they still create
those?), where we can just iterate over a small part of the linked
packet list to get the exact seek position. For example, for AAC audio
tracks with typical samplerates/framesizes we'd iterate about 50 packets
in the linked list.
The results are good. Seeking in large caches is much faster now,
apparently at least 1 or 2 orders of magnitude. Part of this is because
we don't need to touch every damn packet in a huge linked list (bad
cache behavior - the index is a linear memory region instead), but
"thinning" out the search space also helps. Both aspects can be easily
tested (setting INDEX_STEP_SIZE to 0, and replacing e->pts with
e->pkt->kf_seek_pts in find_seek_target()).
This does use more memory of course. In theory, we could tolerate memory
allocation failures (the index is optional and only for performance),
but I didn't bother and inserted an apologetic comment instead, have fun
with the shit code). the memory usage doesn't seem to be that bad,
though. Due to INDEX_STEP_SIZE it's bounded by the file duration too.
Try to account for the additional memory usage with an approximation
(see KF_SEEK_ENTRY_WORST_CASE). It's still a bit different, because the
index needs a single, potentially large allocation.
The search was slightly more complicated and slow than it had to be. It
didn't assume that the packet list was sorted, which is responsible for
much of this. (I think the search code was borrowed from demux_mkv.c,
which does not sort index entries.)
There was a half-hearted attempt to make it exit early, but it was
mostly ineffective.
Simplify the code based on the assumption that the list is sorted. This
will exit the search loop once the worst case candidate entry was
checked.
Mostly about the packet queue and the subtitle handling of it.
(This mess sure sounds like a good argument to give up the separate
stream queues, and using a single packet queue per cached range.)
Until now, this usually passed a single audio frame to the decoder, and
then did a backstep operation (cache seek + frame search) again. This is
probably not very efficient, especially considering it has to search the
packet queue from the "start" every time again.
Also, with most audio codecs, an additional "preroll" frame was passed
first. In these cases, the preroll frame would make up 50% of audio
decoding time. Also not very efficient.
Attempt to fix this by returning multiple frames at once. This reduces
the number of backstep operations and the ratio the preoll frames. In
theory, this should help efficiency. I didn't test it though, why would
I do this? It's just a pain. Set it to unscientific 10 frames.
(Actually, these are 10 keyframes, so it's much more for codecs like
TrueHD. But I don't care about TrueHD.)
This commit changes some other implementation details. Since we can
return more than 1 non-preroll keyframe to the decoder, some new state
is needed to remember how much. The resume packet search is adjusted to
find N ("total") keyframe packets in general, not just preroll frames.
I'm removing the special case for 1 preroll packet; audio used this, but
doesn't anymore, and it's premature optimization anyway.
Expose the new mechanism with 2 new options. They're almost completely
pointless, since nobody will try them, and if they do, they won't
understand what these options truly do. And if they actually do, they
most likely would be capable of editing the source code, and we could
just hardcode the parameters. Just so you know that I know that the
added options are pointless.
The following two things are truly unrelated to this commit, and more
like general refactoring, but fortunately nobody can stop me.
Don't set back_seek_pos in dequeue_packet() anymore. This was sort of
pointless, since it was set in find_backward_restart_pos() anyway (using
some of the same packets). The latter function tries to restrict this to
the first keyframe range though, which is an optimization that in theory
might break with broken files (duh), but in these cases a lot of other
things would be broken anyway.
Don't set back_restart_* in dequeue_packet(). I think this is an
artifact of the old restart code (cf. ad9e473c55). It can be done
directly in find_backward_restart_pos() now. Although this adds another
shitty packet search loop, I prefer this, because clearer what's
actually happening.
The size of all forward buffered packets is used to control maximum
buffering.
Until now, this size was incrementally adjusted, but had to be
recomputed on seeks within the cache. Doing this was actually pretty
expensive. It iterates over a linked list of separate memory allocations
(which are probably spread all over the heap due to the allocation
behavior), and the demux_packet_estimate_total_size() call touches a lot
of further memory locations. I guess this affects the cache rather
negatively. In an unscientific test, the recompute_buffers() function
(which contained this loop) was responsible for roughly half of the time
seeking took.
Replace this with a way that computes the buffered size between 2
packets in constant times. The demux_packet.cum_pos field contains the
summed sizes of all previous packets, so subtracting cum_pos between two
packets yields the size of all packets in between. We can do this
because we never remove packets from the middle of the queue. We only
add packets to the end, or remove packets at the beginning.
The tail_cum_pos field is needed because we don't store the end position
of a packet, so the last packet's position would be unknown. We could
recompute the "estimated" packet size, or store the estimated size in
the packet struct, but I just didn't like this.
This also removes the cached fw_bytes fields. It's slightly nicer to
just recompute them when needed. Maintaining them incrementally was
annoying. total_size stays though, since recomputing it isn't that cheap
(would need to loop over all ranges every time).
I'm always using uint64_t for sizes. This is certainly needed (a stream
could easily burn through more than 4GB of data, even if much less of
that is cached). The actual cached amount should always fit into size_t,
so it's casted to size_t for printfs (yes, I hate the way you specify
stdint.h types in printfs, the less I have to use that crap, the
better).
In ancient times, the number of packets was used to limit excessive
read-ahead. This was completely replaced by tracking the size in bytes.
The number of packets was used in debugging output only.
In one case (packet got demuxed and is added to a queue), only log
whether there were packets on this stream before. (Unknown whether it's
useful.)
In another case (queue overflow), actually count the number of packets.
It's vaguely useful, and the message with the number of packets is shown
only once after a seek reset, so it doesn't matter whether it's slow.
Some state wasn't reset when decoding was started without a seek reset
before it. The code used to rely on reset_decoder() resetting this
state, but since the commit referenced below, reset_decoder() does less
than reset().
Fix this by explicitly calling reset() on initialization.
Fixes: "f_decoder_wrapper: avoid full reset on timeline switch etc."
Some files don't start with keyframe packets. Normally, this is not
sane, but the sample file which triggered this was a cut TV capture
transport stream. And this shouldn't happen anyway.
Introduce a further heuristic: if the last seek target was before the
start of the cached data, and the start of the cache is marked as BOF
(beginning of file), then we won't find anything better. This is
possibly a bit shaky, because both seek_start and back_seek_pos weren't
made for this purpose. But I can't come up with situations where this
would actually break. (Leave this to shitty broken files I hit later.)
I also considered finding the first packet in the cache that is marked
as keyframe, i.e. the first actual seek target, and comparing it to
"first", but I didn't like it much. Well whatever.
It's a bit silly that this caused a hard freeze (and similar issues
still will). The problem is that the demuxer holds the lock and has no
reason to release it. And in general, there's a single lock for the
entire demuxer cache. Finer grained locking would probably not make much
sense. In theory status of available data and maybe certain commands to
the demuxer could be moved to separate locks, but it would raise
complexity, and you'd probably still need to get the central lock in
some cases, which would deadlock you anyway.
It would still be nice if some minor corner case in the wonderfully
terrible and complex backward demuxer state machine couldn't lock up the
player. As a hack, unlock and then immediately lock again. Depending on
the OS mutex implementation, this may give other waiters a chance to
grab the lock. This is not a guarantee (some OSes may for example not
wake up other waiters until the next time slice or something), but works
well on Linux.
The step_backwards function set reader_head to the start of the current
cache range. This was completely unnecessary and made it _much_ slower.
Remove the code that adjusts reader_head. Merge the rest of the code
into the only caller and remove the function.
The comment on the removed code was quite right. It was "inefficient".
Removing it delegates going to an early position to the normal seek
code, triggered by find_backward_restart_pos() incremental back seek
logic. I suppose especially audio benefits from this, because this
happens for every single audio packet (except maybe freaky bullshit like
TrueHD, which has "keyframes").
The blabla about performance in the removed comments is still true, but
now applies to the seek code itself only.
Fixes "mpv file.mkv --cache --demuxer-cache-wait --play-dir=backward",
and other situations where the demuxer cache contains the entire file,
and playback is to start from the end. It also can be triggered when
starting playback normally with --cache, and once everything is in the
cache, enabling backward playback and seeking past EOF.
In all cases, the cache seek will set reader_head=NULL (because you
seeked to/past EOF). Then the code (the one modified by this commit)
sees that ds->queue->is_bof==true, and thinks we've reached BOF
(beginning of file) while searching for a useful packet, i.e. we found
nothing and playback really can only end.
Obviously this is nonsense, we've found only nothing if we actually
searched from the beginning, not some "random" reader_head (== first)
value that does not include the entire cache. That means the condition
should trigger only if the start of the search (first variable) points
to the beginning of the cache (ds->queue->head).
Not taking this if means we'll seek to an earlier position and retry.
Also, a seek before the beginning of the cache will always end up with
reader_head==ds->queue->head, i.e. we'll terminate properly.
That comment was quite right.
Before this commit, there was a single process_decoded_frame() function.
It handled various aspects of dealing with a newly decoded frame. Move
some of these to a separate process_output_frame() function.
This new function is called in the order the frames are returned to the
playback core. Some correct_audio_pts() (was process_audio_frame())
becomes slightly less awkward due to this, and the timestamp smoothing
can actually work in backward playback mode now (thus moving p->pts out
of reset_decoder()).
Behavior for normal playback also changes subtly. This shouldn't matter
in sane cases, but if you mix broken files, --no-correct-pts, and
timeline stuff, differences in behavior might be visible.
Timeline clipping (EDL/ordered chapters) works now, because it's done
before "transforming" the timestamps. Audio timestamp smoothing happens
after it, which is a behavior change, but should be more correct. This
still runs crazy_video_pts_stuff() before everything else. On the pther
hand, --no-correct-pts or missing timestamp processing is done last. But
these things didn't really work with timeline before.
Slightly cleaner. We don't need to awkwardly backup "some" state on
backwards playback. Due to not resetting last_format, normal timeline
switches don't unconditionally trigger recomputing of certain image
parameters. Also probably doesn't reset framedrop parameters, although I
don't care about that part.
This could lead to nonsense when backward playback is involved. Better
reduce the possible interactions. Besides, it's better to fully reset
things on seeks in general.
The only exception is has_broken_packet_pts, which enables hr-seek if
everything looks good. It's intended to trigger at the second hr-seek or
so if the file is normal, and to disable it if the file is broken. It
tries to avoid enabling the hr-seek logic before it can know about
whether things are "good", so resetting it on seeks would obviously
never enable it. Document it as explicit exception.
wm4