Needed because mplayer* basically tracks DAR, which makes it harder for
filters which want to keep the SAR.
The contents of this function are duplicated in a few filters, and will
be used instead of custom code as the filters are updated later.
This makes it behave like vo_lavc.
Unfortunately, the code for setting up the OSD dimensions (mp_osd_res)
is copied from vo_lavc, but it doesn't look like something that should
be factored out.
redraw_frame() copied the image into the currently visible buffer. This
resulted in flicker when doing heavy OSD redrawing (like changing the
subtitle size to something absurdly large).
Use the same logic as draw_image instead.
In order to support OSD redrawing for vo_xv and vo_x11, draw_bmp.c
included an awkward "backup" mechanism to copy and restore image
regions that have been changed by OSD/subtitles.
Replace this by a much simpler mechanism: keep a reference to the
original image, and use that to restore the Xv/X framebuffers.
In the worst case, this may increase cache pressure and memory usage,
even if no OSD or subtitles are rendered. In practice, it seems to be
always faster.
It's not easy to tell whether the OSD/subs are empty, or if something is
drawn. In general you have to use osd_draw() with a custom callback. If
nothing is visible, the callback is never invoked. (The actual reason
why this is so "hard" is the implementation of osd_libass.c, which
doesn't allow separating rendering and drawing of OSD elements, because
all OSD elements share the same ASS_Renderer.)
To simplify avoiding copies, make osd_draw_on_image() instead of the
caller use mp_image_make_writeable(). Introduce osd_draw_on_image_p(),
which works like osd_draw_on_image(), but gets the new image allocation
from an image pool. This is supposed to be an optimization, because it
reduces the frequency of large allocations/deallocations for image data.
The result of this is that the frequency of copies needed in conjunction
with vf_sub, screenshots, and vo_lavc (encoding) should be reduced.
vf_sub now always does true pass-through if no subs are shown.
Drop the pts check from vf_sub. This didn't make much sense.
Remove the strange things the old mp_image_setfmt() code did to the
image format parameters. This includes setting chroma shift to 31 for
gray (Y8) formats and more.
Y8 + vo_opengl_old didn't actually work for unknown reasons (regression
in this branch). Fix this. The difference is that Y8 is now interpreted
as gray RGB (LUMINANCE texture) instead of involving YUV (and levels)
conversion.
Get rid of distinguishing RGB and BGR. There wasn't really any good
reason for this.
Remove mp_get_chroma_shift() and IMGFMT_IS_YUVP16*(). mp_imgfmt_desc
gives the same information and more.
Even though #ifdef ACCURATE is removed, the result should be about the
same. The fallback is only used by packed YUV formats (YUYV, NV12), and
doing 16 bit for them instead of 8 bit is not useful.
A side effect is that Y8 (gray) is not converted drawing subs, and for
alpha formats, the alpha plane is not removed. This means the number of
planes after upsampling can be 1-4 (1: gray, 2: gray+alpha, 3: planar,
4: planar+alpha). The code has to be adjusted accordingly to work on the
color planes only. Also remove the workaround for the chroma shift 31
hack.
mplayer's video chain traditionally used FourCCs for pixel formats. For
example, it used IMGFMT_YV12 for 4:2:0 YUV, which was defined to the
string 'YV12' interpreted as unsigned int. Additionally, it used to
encode information into the numeric values of some formats. The RGB
formats had their bit depth and endian encoded into the least
significant byte. Extended planar formats (420P10 etc.) had chroma
shift, endian, and component bit depth encoded. (This has been removed
in recent commits.)
Replace the FourCC mess with a simple enum. Remove all the redundant
formats like YV12/I420/IYUV. Replace some image format names by
something more intuitive, most importantly IMGFMT_YV12 -> IMGFMT_420P.
Add img_fourcc.h, which contains the old IDs for code that actually uses
FourCCs. Change the way demuxers, that output raw video, identify the
video format: they set either MP_FOURCC_RAWVIDEO or MP_FOURCC_IMGFMT to
request the rawvideo decoder, and sh_video->imgfmt specifies the pixel
format. Like the previous hack, this is supposed to avoid the need for
a complete codecs.cfg entry per format, or other lookup tables. (Note
that the RGB raw video FourCCs mostly rely on ffmpeg's mappings for NUT
raw video, but this is still considered better than adding a raw video
decoder - even if trivial, it would be full of annoying lookup tables.)
The TV code has not been tested.
Some corrective changes regarding endian and other image format flags
creep in.
These functions weren't specific to video filters and were misplaced
in vf.c. Move them to mp_image.c.
Fix the big endian test in vf_mpi_clear/mp_image_clear, which has been
messed up in 74df1d.
According to DOCS/OUTDATED-tech/colorspaces.txt, the following formats
are supposed to be palettized:
IMGFMT_BGR8
IMGFMT_RGB8,
IMGFMT_BGR4_CHAR
IMGFMT_RGB4_CHAR
IMGFMT_BGR4
IMGFMT_RGB4
Of these, only BGR8 and RGB8 are actually treated as palettized in some
way. ffmpeg has only one palettized format (AV_PIX_FMT_PAL8), and
IMGFMT_BGR8 was inconsistently mapped to packed non-palettized RGB
formats too (AV_PIX_FMT_BGR8). Moreover, vf_scale.c contained messy
hacks to generate a palette when AV_PIX_FMT_BGR8 is output. (libswscale
does not support AV_PIX_FMT_PAL8 output in the first place.)
Get rid of all of this, and introduce IMGFMT_PAL8, which directly maps
to AV_PIX_FMT_PAL8. Remove the palette creation code from vf_scale.c.
IMGFMT_BGR8 maps to AV_PIX_FMT_RGB8 (don't ask me why it's swapped),
without any palette use. Enabling it in vo_x11 or using it as vf_scale
input seems to give correct results.
mp_image_alloc_planes() allocated images with minimal stride, even if
the resulting stride was unaligned. It was the responsibility of
vf_get_image() to set an image's width to something larger than
required to get an aligned stride, and then crop it. Always allocate
with aligned strides instead.
Get rid of IMGFMT_IF09 special handling. This format is not used
anymore. (IF09 has 4x4 chroma sub-sampling, and that is what it was
mainly used for - this is still supported.) Get rid of swapped chroma
plane allocation. This is not used anywhere, and VOs like vo_xv,
vo_direct3d and vo_sdl do their own swapping.
Always round chroma width/height up instead of down. Consider 4:2:0 and
an uneven image size. For luma, the size was left uneven, and the chroma
size was rounded down. This doesn't make sense, because chroma would be
missing for the bottom/right border.
Remove mp_image_new_empty() and mp_image_alloc_planes(), they were not
used anymore, except in draw_bmp.c. (It's still allowed to setup
mp_images manually, you just can't allocate image data with them
anymore - this is also done in draw_bmp.c.)
Replace the internal pixel format stuff with code that queries the
libavutil list of pixel format descriptors.
Trying to map IMGFMT_IS_RGB() etc. turned out extremely hacky.
Instead of using a callback to "capture" the image next time the filter
function is called, do it the other way around: on every filter
invocation, create a reference to the image, and return it if a
screenshot is requested. This also fixes the 1-frame delay when taking
screenshots with the filter.
This also allows simplifying screenshot.c.
VFCAP_TIMER disables any additional waiting done by mpv in the
playloop. Remove VFCAP_TIMER, but re-use the idea for vo_image and
vo_lavc.
This means --untimed doesn't have to be passed when using --vo=image.
This allows avoiding a copy.
The logic about using the AVFrame.reference field if buffer hints are
not available is similar to mplayer-svn's direct rendering code. This is
needed because h264 decoding doesn't set buffer hints.
<wm4> michaelni: couldn't it set buffer hints from AVFrame.reference then?
<michaelni> i see no reason ATM why that wouldnt be possible
OK...
Remove mp_image.width/height. The w/h members are the ones to use.
width/height were used internally by vf_get_image(), and sometimes for
other purposes.
Remove some image flags, most of which are now useless or completely
unused. This includes VFCAP_ACCEPT_STRIDE: the vf_expand insertion in
vf.c does nothing.
Remove some other unused mp_image fields.
Some rather messy changes in vo_opengl[_old] to get rid of legacy
mp_image flags and fields. This is left from when vo_gl supported DR.
Change the entire filter API to use reference counted images instead
of vf_get_image().
Remove filter "direct rendering". This was useful for vf_expand and (in
rare cases) vf_sub: DR allowed these filters to pass a cropped image to
the filters before them. Then, on filtering, the image was "uncropped",
so that black bars could be added around the image without copying. This
means that in some cases, vf_expand will be slower (-vf gradfun,expand
for example).
Note that another form of DR used for in-place filters has been replaced
by simpler logic. Instead of trying to do DR, filters can check if the
image is writeable (with mp_image_is_writeable()), and do true in-place
if that's the case. This affects filters like vf_gradfun and vf_sub.
Everything has to support strides now. If something doesn't, making a
copy of the image data is required.
The code was entirely correct, as the VO doesn't report VFCAP_ACCEPT_STRIDE
in query_format. Add stride capability in preparation for changing the
video chain: soon all VOs will have to support arbitrary strides.
The code assumed mp_image_alloc() would allocate an image large enough
for corevideo's stride, which doesn't have to be the case. If
corevideo's stride was larger than the stride of mp_image, the memcpy()
would write beyond the mp_image allocation.
This probably didn't actually happen, but fix the code to be more
correct anyway.
Setting the size of a mp_image must be done with mp_image_set_size()
now. Do this to guarantee that the redundant fields (like chroma_width)
are updated consistently. Replacing the redundant fields by function
calls would probably be better, but there are too many uses of them,
and is a bit less convenient.
Most code actually called mp_image_setfmt(), which did this as well.
This commit just makes things a bit more explicit.
Warning: the video filter chain still sets up mp_images manually,
and vf_get_image() is not updated.
Refcounting will conceptually allocate and free images all the time
when using the filter chain. Add a pool that makes these reallocations
cheap.
This only affects the image data, not mp_image structs and similar small
allocations. Small allocations are always fast with reasonable memory
managers, while large image data will trigger mmap/munmap calls each
time.
Note that if the codec doesn't support DR1, the image has to be copied.
There is no other way to guarantee that the image will be valid after
decoding the next image.
The only important codec that doesn't support DR1 yet is rawvideo. It's
likely that ffmpeg/Libav will fix this at some time. For now, this
decoder uses an evil hack and puts pointers to the packet data into the
returned frame. This means the image will actually get invalid as soon
as the corresponding video packet is free'd, so copying the image is the
only reasonable thing anyway.
Replace libavcodec's native buffer allocation with code taken from
ffplay/ffmpeg's libavfilter support. The code in lavc_dr1.c is directly
copied from cmdutils.c. Note that this is quite arcane code, which
contains some workarounds for decoder bugs and the like. This is not
really a maintainance burden, since fixes from ffmpeg can be directly
applied to the code in lavc_dr1.c.
It's unknown why libavcodec doesn't provide such a function directly.
avcodec_default_get_buffer() can't be reused for various reasons.
There's some hope that the work known as The Evil Plan [1] will make
custom get_buffer implementations unneeded.
The DR1 support as of this commit does nothing. A future commit will
use it to implement ref-counting for mp_image (similar to how AVFrame
will be ref-counted with The Evil Plan.)
[1] http://lists.libav.org/pipermail/libav-devel/2012-December/039781.html
Deprecate the hardware specific video codec entries (like ffh264vdpau).
Replace them with the --hwdec switch, which requests that a specific
hardware decoding API should be used. The codecs.conf entries will be
removed at a later time, but for now they are useful for testing and
compatibility.
Instead of --vc=ffh264vdpau, --hwdec=vdpau should be used.
Add a fallback if hardware decoding fails. Most hardware decoders
(including vdpau) support only a subset of h264, and having such a
fallback is supposed to enable a better user experience.
This was buggy and didn't even work in the simplest cases. It was
disabled when multithreading was used, and always disabled for h264.
A better alternative (reference counting) will be added later.
Hardware decoding still uses the ffmpeg DR mechanism, but has been
decoupled from mpv's DR in the previous commit.
vdpau hardware decoding used the DR (direct rendering) path to let the
decoder query a surface from the VO. Special-case the HW decoding path
instead, to make it separate from DR.
This mutated the variable for the thread count option
(lavc_param->threads) on decoder initialization. This didn't have any
practical relevance, unless formats supporting hardware video decoding
and other formats were played in the same mpv instance. In this case,
hardware decoding would set threads to 1, and all files played after
that would use only one thread as well even with software decoding.
Remove XvMC leftover (CODEC_CAP_HWACCEL).
Simplify the decoder pixel format handling by making it handle only
the case vd_lavc needs: a video stream always decodes to a single
pixel format.
Remove the handling for multiple pixel formats, and remove the
codecs.conf pixel format declarations that are left.
Remove the handling of "ambiguous" pixel formats like YV12 vs. I420 (via
VDCTRL_QUERY_FORMAT etc.). This is only a problem if the video chain
supports I420, but not YV12, which doesn't seem to be the case anywhere,
and in fact would not have any advantage.
Make the "flip" flag a global per-codec flag, rather than a pixel format
specific flag. (Some ffmpeg decoders still return a flipped image, so
this has to be done manually.) Also fix handling of the flip operation:
do not overwrite the global flip option, and make the --flip option
invert the codec flip option rather than overriding it.
Slices allowed filtering or drawing video in horizontal bands or
blocks. This allowed working on the video in smaller units. In theory,
this could bring a performance win by lowering cache pressure, as you
didn't have to keep the whole video frame in cache while filtering,
only the slice.
In practice, the slice code path was barely used for the following
reasons:
- Multithreaded decoding with ffmpeg didn't use slices. The ffmpeg
slice callback was disabled, because it can be called from another
thread, and the mplayer video chain is not thread-safe.
- There was nothing that would turn "full" images into appropriate
slices, so slices were rarely used.
- Most filters didn't actually support slices.
On the other hand, supporting slices lead to code duplication and more
complex code in general. I made some experiments and didn't find any
actual measurable performance improvements when using slices. Even
ffmpeg removed slices based filtering from libavfilter in favor of
simpler code.
The most broken thing about the slices code path is that slices can't
be queued, like it is done for images in vo.c.
For some reason, libavcodec abuses the slices rendering code path for
hardware decoding: in that case, the only purpose of the draw callback
is to pass a vdpau video surface object to video output. (It is unclear
to me why this had to use the slices code, instead of just returning an
AVFrame with the required vdpau state.)
Make this code separate within mpv, so that the internal slices code
path is not used for hardware decoding. Pass the vdpau state with
VOCTRL_HWDEC_DECODER_RENDER instead.
Remove the mencoder specific VOCTRLs.
Remove VOCTRL_DRAW_IMAGE and always set vo_driver.draw_image in VOs.
Make draw_image mandatory: change some VOs (like vo_x11) to support it,
and remove the image-to-slices fallback in vf_vo.
Remove vo_driver.is_new. This member indicated whether draw_image is
supported unconditionally, which is now always the case.
draw_image_pts is a hack until the video filter chain is changed to
include the PTS as field in mp_image. Then vo_vdpau and vo_lavc will
be changed to use draw_image.
The check determined whether the argument for .align is in bytes, or
log2(bytes). Apparently it's always in bytes for ELF i386 systems, and
this check is used for x86 inline assembler only. Even if this
assumption should be wrong, it likely won't cause much damage: the
existing code uses it only in the form ".align 4", which means in the
worst case it will try to align to 16 bytes, which doesn't cause any
problems (unless the object file format does not support such a high
alignment).
Update the filters that used this.
Quoting the GNU as manual:
For other systems, including ppc, i386 using a.out format, arm and
strongarm, it is the number of low-order zero bits the location counter
must have after advancement. For example `.align 3' advances the
location counter until it a multiple of 8. If the location counter is
already a multiple of 8, no change is needed.
The premultiplied-alpha hack is changed:
- The first stage now uses a colormod of black with an unmodified
texture. This saves on applying the AND mask of 0xFF000000 to keep
alpha only.
- The second stage no longer uses an AND mask, but only an OR mask of
0xFF000000 to cancel out alpha.
- The texture uploads are no longer done using SDL_LockTexture,
SDL_ConvertPixels, SDL_UnlockTexture when the mpv pixel format matches
the OSD's pixel format. Instead, SDL_UploadTexture is used, which
saves a copy when using the "opengl" renderer.
Strictly speaking, 444P is higher quality than YV12, but doing this is
not very useful when playing 10 bit video with -vo opengl-old on a GPU
that doesn't support 16 bit textures.
For 9-15 bit material, cutting off the lower bits leads to significant
quality reduction, because these formats leave the most significant bits
unused (e.g. 10 bit padded to 16 bit, transferred as 8 bit -> only
2 bits left). 16 bit formats still can be played like this, as cutting
the lower bits merely reduces quality in this case.
This problem was encountered with the following GPU/driver combination:
OpenGL vendor string: Intel Open Source Technology Center
OpenGL renderer string: Mesa DRI Intel(R) 915GM x86/MMX/SSE2
OpenGL version string: 1.4 Mesa 9.0.1
It appears 16 bit support is rather common on GPUs, so testing the
actual texture depth wasn't needed until now. (There are some other Mesa
GPU/driver combinations which support 16 bit only when using RG textures
instead of LUMINANCE_ALPHA. This is due to OpenGL driver bugs.)
The extension checking logic was broken, which reported OpenGL 3 if the
OpenGL .so exported OpenGL 3-only symbols, even if the reported OpenGL
version is below 3.0. Fix it and simplify the code a bit. Also never
fail hard if required functions are not found. The caller should check
the capability flags instead. Give up on the idea that we should print
a warning if essential functions are not found (makes loading of ancient
legacy-only extensions easier).
This was experienced with the following version strings:
OpenGL vendor string: Intel Open Source Technology Center
OpenGL renderer string: Mesa DRI Intel(R) 915GM x86/MMX/SSE2
OpenGL version string: 1.4 Mesa 9.0.1
(Possibly reports a very old version because it has no GLSL support,
and thus isn't even GL 2.0 compliant.)
Change from gamma 2.2 to the slightly more precise 1/0.45 as per BT.709.
https://www.itu.int/rec/R-REC-BT.709-5-200204-I/en mentions a value of
γ=0.45 for the conceptual non-linear precorrection of video signals.
This is approximately the inverse of 2.22, and not 2.20 as the code had
been using until now.
This mainly serves as a fallback for platforms where nothing better is
available; also as a debugging help. Both the audio and video driver are
not first class - the audio driver lacks delay detection, and the video
driver only supports a single YUV color space.
Configure options: --disable-sdl2 to disable SDL 2.0+ detection,
--disable-sdl to disable SDL 1.2+ detection. Both options need to be
specified to turn off SDL support entirely.
This is better than having just the operating system type decide the
wakeup period, as e.g. when compiling for Win32/cygwin, a wakeup period
of 0.5 would work perfectly fine.
Instead, the default wakeup period is now only decided by availability
of a working select() system call (which is the case on cygwin but not
mingw and MSVC) AND a vo that can provide an event file descriptor or a
similar hack (vo_corevideo). vos that cannot do either need polling for
event handling and now can set the wakeup period to 0.02 in the vo code.
Using vf_screenshot on Libav printed useless/misleading error messages
when playing 10 bit h264 with a VO that supports 8 bit yuv420p only:
Unsupported format 444p14le
Unsupported format 444p14be
...
The cause of this is that vf_scale is inserted to handle the format
conversion, and tries to find a pixel format with best quality. This
includes the 14 bit and 12 bit formats, which don't exist on Libav.
vf_screenshot tries to query whether Libav's libswscale supports it,
resulting in these error messages. (In theory, vf_scale is missing this
check, but it doesn't matter in practice.)
Since this warning is rather useless anyway, because all input video
comes from libavcodec, and only the conversion into the other could
possibly fail. Silence the warning by raising it to verbose message
level.
Closes#7.
Based on a patch by qyot27. Add the missing parts in mp_get_chroma_shift(),
which allow allocation of such images, and which make vo_opengl
automatically accept the new formats. Change the IMGFMT_IS_YUVP16_LE/BE
macros to properly report IMGFMT_444P14 as supported: this pixel format
has the highest numerical bit width identifier (0x55), which is not
covered by the mask ~0xfc. Remove 1 bit from the mask (makes it 0xf8) so
that IMGFMT_IS_YUVP16(IMGFMT_444P14) is 1. This is slightly risky, as
the organization of the image format IDs (actually FourCCs + mplayer
internal IDs) is messy at best, but it should be ok.
To get guaranteed alignment for the chroma planes with typical YV12
playback, we have to double the alignment on the image width, as the
chroma planes have half the image width.
Clear the image with black instead of green to hide scaling artifacts
on the right border of the screen.
(It might be possible to create the image layout ourselves by not
calling XvShmCreateImage(), and filling in our own image width and exact
strides, but that's probably too risky: the Xv client library sends an
X protocol request to query the real image dimension and strides. It is
unknown to me whether X servers or drivers would generally accept an
image with mismatching parameters, even if the image is conceptually
valid.)
Allocate the image with av_malloc() in the non-SHM case. I suspect the
non-SHM case doesn't matter much, though.
Gestalt is deprecated since 10.8. Change the code to read the OS version from
a system plist file.
As mentioned http://stackoverflow.com/a/11072974/499456 Apple engineers are
suggesting this plist reading approach.
Apparently the -spugauss option was popular. The code originally
implementing this is gone (scaler stuff in spudec.c). Reimplement it
using libswscale to scale and blur image subtitles if the --sub-gauss
option is set.
The code does some rather lazy padding to allow the blur to spread
pixels past the original image bounding box. (This problem exists with
normal bilinear scaling too, but is barely noticable.)
Technically, this doesn't just blur subtitles, but anything RGBA (or
indexed) that enters the OSD rendering path. But only image subtitles
produce these OSD formats currently, so no explicit check is done to
prevent blurring in other cases.
The memcpy_pic() function had a rather dangerous optimization: when the
limit2width flag was not set, it was allowed to overwrite the data
between the last pixel of a line and the first pixel of the next line
(i.e. write over the stride padding). That was also the reason why there
are so many whacky names for this function (memcpy_pic, my_memcpy_pic,
memcpy_pic2).
Kill this optimization, and never overwrite the stride padding. The code
doing this can still be used if there's no stride padding at all,
though.
Also use the name memcpy_pic for the proper function. Now it should be
rather clear that my_memcpy_pic and memcpy_pic2 are compatibility
aliases. They should go away over the time.
sws_getContextFromCmdLine_hq() was used by the screenshot code, which
now uses mp_image_swscale().
Also move the mp_sws_set_colorspace() declaration from sws_utils.h to
vf_scale.c.
This is required, as the Xv image is directly used for rendering OSD and
taking screenshots. These involve libswscale, which wants aligned
strides.
There doesn't seem to be an easy way to request aligned strides from Xv.
Simply request an image with an aligned width, which usually results in
an aligned stride. The padding border remains invisible.
One caveat is that if padding is added, there might be scaling artifacts
on the right pixel border of the screen. This is at least the case with
nvidia binary drivers. Since we consider vo_xv a sensible choice only on
crappy/slow hardware, performance is more important than quality.
By "design", mplayer normally allocates aligned images only inside the
filter chain, via the vf_get_image() function. This function pads the
width of the requested image if a stride is allowed, sets that new width
before calling mp_image_alloc_planes().
However, newer code wants aligned images as well (basically to satisfy
libswscale). This affects all uses of alloc_mpi(). To get aligned
strides, simply change alloc_mpi() to request an aligned width.
Remove the old hack in mp_image_alloc_planes(), which special cases some
image formats to be allocated with aligned strides.
This is a temporary hack until mp_image_alloc_planes() is revised.
As pointed out in commit ed01df, the quality loss due to frequent
conversion between RGB and YUV is too much when drawing OSD and
subtitles.
Fix this by staying in the same colorspace when drawing subtitles.
Render directly to RGB, without converting to YUV first.
The bad thing about packed RGB is that there are many pixel formats,
which would all require special code for blending. It's also completely
incompatible to planar YUV. Use planar RGB instead, which allows us to
reuse all code originally written for planar YUV. The only thing that
needs to be changed is the color conversion in the libass case. (In
exchange for simpler code, the image has to be copied, but this is
still much better than converting to YUV.)
Unfortunately, libswscale doesn't support planar RGB output. Add a hack
to sws_utils.c to handle conversion to planar RGB. In the common case,
when converting 32 bit per pixel RGB, calling swscale can be avoided
entirely.
The change in mp_image.c is needed to allocate GBRP images correctly.
(The issue with vo_x11 could be easily solved by always backing up the
same bounding box as the bitmap drawing RGB<->YUV conversion does, but
this commit is probably the better fix.)
Until now, screenshots with the video filter didn't add subs (unclear
whether that was an oversight or feature). Fix this and make behavior
when taking screenshots with vf_screenshot more consistent with VO
screenshots.
The change in vf_screenshot is needed, because add_subs() checks this
flag to decide whether it's allowed to mutate the image.
This commit has another user visible side effect. When taking a
screenshot each frame (using the "each-frame" mode of the screenshot
command), a normal screenshot command will stop the each-frame mode.
mp_image has this confusing distinction between the w/h and width/height
fields. w/h are the actual width and height, while width/height have a
very special meaning inside the video filter code: it's the actually
allocated width, which is also used for stride padding.
Screenshot related code abused the w/h fields to store the aspect
corrected size. Some code confused the role of w/h and width/height.
Fix these issues. For aspect corrected size, display_w/h are used, while
width/height should never be used outside vf.c internals and related
code.
This also fixes an actual bug when taking screenshots of anamorphic
video with vf_screenshot, as well as using vo_image with such videos.
The OSD couldn't be updated at all without frame stepping. This made the
VO unusable (In fact, vo_x11 should never be used, but it's provided as
fail-safe fallback). Implement VOCTRL_REDRAW_FRAME to deal with this.
Unfortunately, this exposes issues with draw_bmp's subtitle rendering:
areas that are not covered by subtitles at all are changed as well. The
"backup" mechanism provided by draw_bmp doesn't copy these areas, which
turns up as quite visible artifacts. (These are included when taking
screenshots too.)
Although vo_x11 shouldn't be used, it's a good thing to have screenshot
support in absolutely all interactive VOs. (Except vo_caca, but that is
literally a joke.)
In order to improve performance, vo_xv didn't create a backup of the
video frame before drawing OSD and subtitles during normal playback. It
required the frontend to do frame stepping if it wanted to redraw the
OSD, but no backup of the video frame was available. (Consider the
following use case: enable the OSD permanently with --osd-level=3, then
pause during playback and do something that shows an OSD message. The
player will advance the video by one frame at the time the new OSD
message is first drawn.)
This also meant that taking a screenshot during playback with vo_xv
would include OSD and subtitles in the resulting image.
Fix this by always creating a backup before drawing OSD or subtitles.
In order to avoid having to create a full copy of the whole image frame,
introduce a complex scheme that tries to backup only the changed
regions.
It's unclear whether the additional complexity in draw_bmp.c for
backing up only the changed areas of the frame is worth it. Possibly
a simpler implementation would suffice, such as tracking only Y ranges
of changed image data, or even just copying the full frame.
vo_xv's get_screenshot() now always creates a copy in order not to
modify the currently displayed frame.
Don't request CONTEXT_FORWARD_COMPATIBLE when creating a GL3 context on
X11. This improves compatibility with some Mesa drivers.
Setting this bit was originally intended to make the code compatible
to newer (future, possibly not yet existing) OpenGL implementations.
These implementations wouldn't have to support deprecated legacy GL
features, which we know that we don't use, and could return a context
with a higher OpenGL version than requested.
In practice, this didn't work out. CONTEXT_FORWARD_COMPATIBLE requires
the driver to explicitly disable deprecated functionality. If it doesn't
do that, it has to reject context creation with that flag set. And it
turns out there are Mesa drivers which suffer from this caveat. See [1].
This probably also means that a GL application with a fixed set of
required GL features (such as a subset of GL 3.2 core, like vo_opengl.c)
may need to probe several GL versions if drivers really start dropping
legacy GL.
On Windows, CONTEXT_FORWARD_COMPATIBLE is still set. It is not known
if this is ideal, but fortunately there is no Mesa on Windows.
CONTEXT_CORE_PROFILE is still always set. For requested GL versions
lower than 3.2, this flag is ignored. Should we requires higher versions
later, we want it to be set, so don't remove it.
[1] https://bugs.freedesktop.org/show_bug.cgi?id=57241
The lines added with this commit were accidentally removed in commit
a0d759, which was a pure cleanup commit merged from mplayer-svn. The
difference between mplayer-svn and the mplayer2 base is that this
filter has been made PTS aware in mplayer2.
Also remove the redundant initialization of vf->priv->state.
This wasn't actually used since the old gray-alpha OSD rendering has
been removed. Removing the documentation for the vo_opengl_old osdcolor
suboption was forgotten as well.
The -zoom option enabled scaling with vo_x11. Remove the -zoom option,
and make its behavior default. Since vo_x11 has to use libswscale for
colorspace conversion anyway, which doesn't do actual extra scaling when
vo_x11 is run in windowed mode, there should be no speed difference with
this change.
The code removed from vf_scale attempted to scale the video to d_width/
d_height, which matters for anamorphic video and the --xy option only.
vo_x11 can handle these natively. The only case for which the removed
vf_scale code could matter is encoding with vo_lavc, but since that
didn't set VOFLAG_SWSCALE, nothing actually changes.
This pixel format is sometimes used with yuv4mpeg.
vo_direct3d used its own IMGFMT_Y16 internally for some reason.
vo_opengl, vo_opengl_old, and vo_direct3d should be able to display
this pixel format natively.
Libav 0.8.4 is ridiculously old (in relative terms), so I don't know
how many things are broken silently.
Encoding is disabled, because the required API hasn't been added yet.
(On the other hand, the old API can't be used in newer versions.)
This should improve compatibility with ffmpeg 0.11.2 as well, which
didn't define AV_CODEC_ID_SUBRIP yet.
Finish renaming directories and moving files. Adjust all include
statements to make the previous commit compile.
The two commits are separate, because git is bad at tracking renames
and content changes at the same time.
Also take this as an opportunity to remove the separation between
"common" and "mplayer" sources in the Makefile. ("common" used to be
shared between mplayer and mencoder.)
Tis drops the silly lib prefixes, and attempts to organize the tree in
a more logical way. Make the top-level directory less cluttered as
well.
Renames the following directories:
libaf -> audio/filter
libao2 -> audio/out
libvo -> video/out
libmpdemux -> demux
Split libmpcodecs:
vf* -> video/filter
vd*, dec_video.* -> video/decode
mp_image*, img_format*, ... -> video/
ad*, dec_audio.* -> audio/decode
libaf/format.* is moved to audio/ - this is similar to how mp_image.*
is located in video/.
Move most top-level .c/.h files to core. (talloc.c/.h is left on top-
level, because it's external.) Park some of the more annoying files
in compat/. Some of these are relicts from the time mplayer used
ffmpeg internals.
sub/ is not split, because it's too much of a mess (subtitle code is
mixed with OSD display and rendering).
Maybe the organization of core is not ideal: it mixes playback core
(like mplayer.c) and utility helpers (like bstr.c/h). Should the need
arise, the playback core will be moved somewhere else, while core
contains all helper and common code.