The frontend doesn't use this.
Also use double for returning the chapter times. Everything uses double
for times, and there's no reason to use float here.
Also, mark demuxer as not capable if DVD playback is done. The problem
with DVD is that playback time (stream_pts) is not reported frame-exact,
and the time is a "guess" at best.
With the commit "demux_lavf: fix DEMUXER_CTRL_RESYNC", DVD playback
seems to work nicely with demux_lavf, and maybe works even better than
with demux_mpg.
The old demuxer can be forced with: --demuxer=mpegps
If no regressions surface, demux_mpg.c will be deleted later.
DVD playback uses a demuxer that signals to the frontend that timestamp
resets are possible. This made the frontend calculate the OSD playback
position based on the byte position and the total size of the stream.
This actually broke DVD playback position display. Since DVD reports a
a linear playback position, we don't have to rely on the demuxer
reported position, so disable this functionality in case of DVD
playback. This reverts the OSD behavior with DVD to the old behavior.
The stream ID handling as it was changed in commit 654c34f was still
a little bit insane, and caused a regression with the cover art hack
(the stream set in demux->video->sh was incorrect for demux_lavf).
Simplify by always using stream_index for demux_stream->id, and getting
rid of that tid thing. It turns out that the id for subtitles isn't
special either (maybe demux_ts.c was the only thing left that required
this).
Get rid of the 1-char subtitle type field. Use sh_stream->codec instead
just like audio and video do. Use codec names as defined by libavcodec
for simplicity, even if they're somewhat verbose and annoying.
Note that ffmpeg might switch to "ass" as codec name for ASS, so we
don't bother with the current silly "ssa" name.
MP_INPUT_BUFFER_PADDING_SIZE and FF_INPUT_BUFFER_PADDING_SIZE are both
16. The doxygen for FF_INPUT_BUFFER_PADDING_SIZE says only the first 23
bits must to be 0, but this is probably a lie.
Some preparations to simplify demux_mkv and demux_lavf.
struct demux_stream manages state for each stream type that is being
demuxed (audio/video/sub). demux_stream is rather annoying, especially
the id and sh members, which are often used by the demuxers to determine
current stream and so on. Demuxers don't really have to access this,
except for testing whether a stream is selected and to add packets.
Add a new_sh_stream(), which allows creating streams without having the
caller specify any kind of stream ID. Demuxers should just use sh_stream
pointers, instead of multiple kinds of IDs and indexes.
The condition that checked whether the chapters are out of order and
should be sorted was inverted. This likely wasn't noticed in testing,
because even if the chapters are unsorted, if the last two chapters
were sorted, the rest got sorted too.
Instead of doing this silly check, always sort the chapters after
demuxer initialization. Also make sure the sort order is stable in case
chapter start times are the same (original_index check).
CC demux/demux.o
demux/demux.c: In function 'demuxer_switch_track':
demux/demux.c:1241:29: warning: array subscript is above array bounds [-Warray-bounds]
int new_id = demuxer->ds[type]->id;
^
The code modified by this commit is supposed to prevent demuxing the
whole file when cover art is present. (The problem with cover art is
that the ffmpeg libavformat API doesn't signal video EOF correctly - so
we try to read more packets to find the next video frame, which results
in demuxing and queuing the whole audio stream.)
This caused regressions for files with extremely high audio offset (see
github issue #46). MY conclusion is that this cover art crap doesn't
work, and this is just another case of completely insane ffmpeg/libav
API.
Disable the hack in all cases, unless a cover art video track is
selected. Maybe I'll handle cover art directly in the frontend later, so
that we don't have to rely on whatever libavformat does.
Unfortunately, this also makes behavior with equally insane mp4 files
with sparse video tracks worse, but this issue takes priority.
The old names have been deprecated a while ago, but were needed for
supporting older ffmpeg/libav versions. The deprecated identifiers
have been removed from recent Libav and FFmpeg git.
This change breaks compatibility with Libav 0.8.x and equivalent
FFmpeg releases.
Apparently this cuases trouble for legacy demuxers. demux_mpg stopped
doing PCM audio. (The problem was probably that it read a bunch of
video packets on detection, and then the sparse video hack prevented
audio packets from being read, because it looked like there were no
more audio packets. With sparse video, this normally helps not reading
too many audio packets.)
Since the legacy demuxers do not need this hack, enable it for
demux_lavf and demux_mkv only.
Some additional hacks that were needed to handle legacy demuxers can be
removed, making the code simpler.
Also see commit 4a40eed.
There should be no functional changes, except that way how avoiding
spamming the terminal with the overflow warning is handled changes a
bit.
The removed check for ds->eof looks suspicious, but it should be
redundant now.
Instead of putting codec header data into WAVEFORMATEX and
BITMAPINFOHEADER, pass it directly via AVCodecContext. To do this, we
add mp_copy_lav_codec_headers(), which copies the codec header data
from one AVCodecContext to another (originally, the plan was to use
avcodec_copy_context() for this, but it looks like this would turn
decoder initialization into an even worse mess).
Get rid of the silly CodecID <-> codec_tag mapping. This was originally
needed for codecs.conf: codec tags were used to identify codecs, but
libavformat didn't always return useful codec tags (different file
formats can have different, overlapping tag numbers). Since we don't
go through WAVEFORMATEX etc. and pass all header data directly via
AVCodecContext, we can be absolutely sure that the codec tag mapping is
not needed anymore.
Note that this also destroys the "standard" MPlayer method of exporting
codec header data. WAVEFORMATEX and BITMAPINFOHEADER made sure that
other non-libavcodec decoders could be initialized. However, all these
decoders have been removed, so this is just cruft full of old hacks that
are not needed anymore. There's still ad_spdif and ad_mpg123, bu neither
of these need codec header data. Should we ever add non-libavcodec
decoders, better data structures without the past hacks could be added
to export the headers.
Also move the lang field into the general stream header. (SH_COMMON is
an old hack to "share" code between audio/video/sub headers.)
There should be no functional changes, other than not printing stream
info in verbose mode or with slave mode. (The frontend already prints
stream info, and this is just a leftover when individual demuxers did
this, and slave mode remains broken.)
Use codec names instead of FourCCs to identify codecs. Rewrite how
codecs are selected and initialized. Now each decoder exports a list
of decoders (and the codec it supports) via add_decoders(). The order
matters, and the first decoder for a given decoder is preferred over
the other decoders. E.g. all ad_mpg123 decoders are preferred over
ad_lavc, because it comes first in the mpcodecs_ad_drivers array.
Likewise, decoders within ad_lavc that are enumerated first by
libavcodec (using av_codec_next()) are preferred. (This is actually
critical to select h264 software decoding by default instead of vdpau.
libavcodec and ffmpeg/avconv use the same method to select decoders by
default, so we hope this is sane.)
The codec names follow libavcodec's codec names as defined by
AVCodecDescriptor.name (see libavcodec/codec_desc.c). Some decoders
have names different from the canonical codec name. The AVCodecDescriptor
API is relatively new, so we need a compatibility layer for older
libavcodec versions for codec names that are referenced internally,
and which are different from the decoder name. (Add a configure check
for that, because checking versions is getting way too messy.)
demux/codec_tags.c is generated from the former codecs.conf (minus
"special" decoders like vdpau, and excluding the mappings that are the
same as the mappings libavformat's exported RIFF tables). It contains
all the mappings from FourCCs to codec name. This is needed for
demux_mkv, demux_mpg, demux_avi and demux_asf. demux_lavf will set the
codec as determined by libavformat, while the other demuxers have to do
this on their own, using the mp_set_audio/video_codec_from_tag()
functions. Note that the sh_audio/video->format members don't uniquely
identify the codec anymore, and sh->codec takes over this role.
Replace the --ac/--vc/--afm/--vfm with new --vd/--ad options, which
provide cover the functionality of the removed switched.
Note: there's no CODECS_FLAG_FLIP flag anymore. This means some obscure
container/video combinations (e.g. the sample Film_200_zygo_pro.mov)
are played flipped. ffplay/avplay doesn't handle this properly either,
so we don't care and blame ffmeg/libav instead.
Improve EOF handling in ds_fill_buffer for the case where one stream ends
much earlier than the others, in particular make sure the "too many ..."
message is not printed over and over.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@32823 b3059339-0415-0410-9bf9-f77b7e298cf2
Conflicts:
libmpdemux/demuxer.c
Try to improve seeking in files with only few video packets,
in particular files with cover art.
This might cause issues with badly interleaved files, particularly
together with -audio-delay, even though I did not see issues
in my very limited testing.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@35486 b3059339-0415-0410-9bf9-f77b7e298cf2
Conflicts:
libmpdemux/demuxer.c
libmpdemux/demuxer.h
Fix code that detects streams temporarily lacking data to work
properly with e.g. DVDs.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@35499 b3059339-0415-0410-9bf9-f77b7e298cf2
Conflicts:
libmpdemux/demuxer.c
Make stream eof detection less sensitive.
Fixes bug #2111.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@35543 b3059339-0415-0410-9bf9-f77b7e298cf2
Conflicts:
libmpdemux/demuxer.c
libavformat wants to read a full ~400KB of data to determine whether
it's really AAC. This causes slow startup with AAC web radio streams [1]
(possible due to a broken initial packet). There are similar issues
with other file formats.
Make the probe "score" (libavformat's mechanism for testing file
formats) configurable with the -lavfdtops:probescore option. This allows
lowering the amount of data read on probing. If the probe score is below
the probescore option value, demux_lavf will try to get a higher score
by feeding more data to libavformat, until the required score or the
max. probe size is reached.
Remove the lavf_preferred demuxer entry. This had a purpose in
mplayer-svn, but now there doesn't seem to be any good reason for it
to exist. Make sure that our native "good" demuxers are above
demux_lavf in demuxer_list[] instead (so that they are preferred).
[1] http://lr2mp0.latvijasradio.lv:8000
ffmpeg recently added a demuxer that can read vobsubs (pairs of .sub and
.idx files). Get rid of the internal vobsub reader, and use the ffmpeg
demuxer instead.
Sneak in an unrelated manpage change (autosub default).
This affects streams loaded with -subfile and -audiofile. They could get
out of sync when they were deselected, and the main file was seeked. Add
code to seek external files when they are selected (see
init_demux_stream()).
Use avformat_seek_file() under certain circumstances. Both av_seek_frame()
("old" API) and avformat_seek_file() ("new" API) seem to be broken with
some formats. At least the vobsub demuxer doesn't implement the old API
(and the old API doesn't fallback to the new API), while the fallback
from new API to old API gives bad results. For example, seeking forward
with small step sizes seems to fail with the new API (tested with
Matroska by trying to seek 1 second forward relative to priv->last_pts).
Since only subtitle demuxers implement the new API anyway, checking
whether iformat->read_seek2 is set to test whether the old API is not
supported gives best results. This is a hack at best, but makes things
work.
Remove backwards seeking on seek failure. This was annoying, and only
was there to compensate for obscure corner cases (see 1ad332). In
particular, files with completely broken seeking that used to skip back
to the start on every seek request may now terminate playback.
Enable autoprobing for demux_mf, so that image files can be directly
displayed with e.g. "mpv file.jpg --pause". (The --pause switch is
needed to prevent the window from closing immediately.)
Since demux_mf doesn't have any real file format probing and goes by
file extension only, move the demuxer down the demuxer list to ensure
it's checked last. (ffmpeg's demux_mf equivalent, "image2", probes by
file extensions too, and there doesn't seem to be anything that can
probe typical image file formats from binary data.)
Remove the --mf "w" and "h" suboptions. Don't pass the width/height to
the video stream header. Both of these are useless, because the decoder
reads the real image size at a later point from the file headers.
Remove setting the BITMAPINFOHEADER as well, as vd_lavc doesn't need
this.
Enable --correct-pts by default. This fixes displaying a single image
with vo_vdpau (as mentioned by uau).
Keep around a pointer to the sh_video stream header instead of
accessing demuxer->video->sh_video. Fixes a crash when deselecting the
video track.
Note that the format probing is incorrect when opening images from HTTP
locations. File extensions don't have to match the actual file format.
A correct implementation would require to check the MIME type, or to
probe the binary data correctly.
Finish renaming directories and moving files. Adjust all include
statements to make the previous commit compile.
The two commits are separate, because git is bad at tracking renames
and content changes at the same time.
Also take this as an opportunity to remove the separation between
"common" and "mplayer" sources in the Makefile. ("common" used to be
shared between mplayer and mencoder.)
Tis drops the silly lib prefixes, and attempts to organize the tree in
a more logical way. Make the top-level directory less cluttered as
well.
Renames the following directories:
libaf -> audio/filter
libao2 -> audio/out
libvo -> video/out
libmpdemux -> demux
Split libmpcodecs:
vf* -> video/filter
vd*, dec_video.* -> video/decode
mp_image*, img_format*, ... -> video/
ad*, dec_audio.* -> audio/decode
libaf/format.* is moved to audio/ - this is similar to how mp_image.*
is located in video/.
Move most top-level .c/.h files to core. (talloc.c/.h is left on top-
level, because it's external.) Park some of the more annoying files
in compat/. Some of these are relicts from the time mplayer used
ffmpeg internals.
sub/ is not split, because it's too much of a mess (subtitle code is
mixed with OSD display and rendering).
Maybe the organization of core is not ideal: it mixes playback core
(like mplayer.c) and utility helpers (like bstr.c/h). Should the need
arise, the playback core will be moved somewhere else, while core
contains all helper and common code.
wm4
Rudolf Polzer
reimar