Support 'lpcm' in mov files, has audible (clipping?) artefacts on some
systems.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@33075 b3059339-0415-0410-9bf9-f77b7e298cf2
Support 32bit big endian float pcm in aiff.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@33076 b3059339-0415-0410-9bf9-f77b7e298cf2
Audio with all codec tags other than 0x2000 was byte-swapped, while
only "dnet" should be.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@33028 b3059339-0415-0410-9bf9-f77b7e298cf2
Support audio in Leitch/Harris' VR native stream format (LXF).
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@32990 b3059339-0415-0410-9bf9-f77b7e298cf2
Support dvvideo in Leitch/Harris' VR native stream format (LXF).
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@32991 b3059339-0415-0410-9bf9-f77b7e298cf2
At least for Wing Commander 4 files, -demuxer lavf is needed to
play XAN DPCM audio (while Wing Commander 3 avi plays fine with
-demuxer avi, although it also contains the video codec we call "XAN
wc4").
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@32894 b3059339-0415-0410-9bf9-f77b7e298cf2
Delete mp3lib which has been the default mp3 decoder until now. In
addition to being an unnecessary embedded library it now fails to
compile correctly with the new gcc-4.6, producing noise.
After the deletion the default decoder priority for mp3 will be first
libmpg123 (a newer version of the code that mp3lib was based on) if
available, then ffmp3float which should be available in all normal
compiles. I think that some tweaking may be required as these decoder
alternatives get wider testing, but any problems should be solvable
and there should be no need for mp3lib.
add apco and ap4h fourcc to prores decoder
add ai55 and ai15 fourcc to h264 docoders
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@32843 b3059339-0415-0410-9bf9-f77b7e298cf2
There were multiple files specific to Zoran support, and they also
depended on internal FFmpeg headers (so it would probably have been
hard to get them to compile now even if you tried). It's obsolete now,
so just drop the whole mess.
Also move the profiles to the bottom of the example configuration file
as the original remarks in the file suggested.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@32754 b3059339-0415-0410-9bf9-f77b7e298cf2
* hr-seek:
input: add default keybindings Shift+[arrow] for small exact seeks
input: support bindings with modifier keys for X input
core: audio: make ogg missing audio timing workaround more complex
core: add support for precise non-keyframe-limited seeks
core: add struct for queued seek info
commands: add generic option -> property wrapper
options: add "choice" option type, use for -pts-association-mode
core: remove looping in update_video(), modify command handling a bit
core: seek: use accurate seek mode with audio-only files
core: avoid using sh_video->pts as "current pts"
libvo: register X11 connection fd in input event system
core: timing: add special handling of long frame intervals
core: move central play loop to a separate function
Conflicts:
DOCS/tech/slave.txt
Add support for binding commands to modifier+key combinations like
"Shift+Left" or "Ctrl+Alt+x", and support reading such combinations
from the output window of X VOs.
The recognized modifier names are Shift, Ctrl, Alt and Meta. Any
combination of those and then a non-modifier key name, separated by
'+', is accepted as a key name in input.conf. For non-special keys
that produce characters shift is ignored as a modifier. For example
"A" is handled as a key without modifiers even if you use shift to
write the capital letter; 'a' vs 'A' already distinguishes the
combinations with a normal keymap, and having separate 'a', 'Shift+A'
and 'A' (written with caps lock for example) would bring more
confusion than benefit.
Currently reading the modifier+key combinations is only supported in
the output window of those VOs that use x11_common.c event
handling. It's not possible to input the key combinations in other VOs
or in a terminal window.
Add support for decoding Avid DNxHD through the QuickTime component.
This is needed for the 10-bit variant which the FFmpeg decoder does not
support (unfortunately both use the same FourCC).
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@32649 b3059339-0415-0410-9bf9-f77b7e298cf2
Bump codecs.conf version.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@32650 b3059339-0415-0410-9bf9-f77b7e298cf2
change dnxhd to qtdnxhd. consistant with all other quicktime decoders
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@32658 b3059339-0415-0410-9bf9-f77b7e298cf2
FFmpeg's AAC decoder is much faster than libfaad2. The only known
exception is libfaad2 compiled in fixed-point mode on systems with
slow FPUs. Now that LATM support in FFmpeg is complete, FFmpeg's AAC
decoder has a similar feature set as libfaad2. This leaves no reason
not to use FFmpeg by default.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@32605 b3059339-0415-0410-9bf9-f77b7e298cf2
For FFmpeg codecs YV12 should always be in the supported format
lists if I420 is.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@32593 b3059339-0415-0410-9bf9-f77b7e298cf2
fflatm seems to be working, whereas external faad does not work at all
with latm (internal does).
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@32585 b3059339-0415-0410-9bf9-f77b7e298cf2
Also move libfaad codecs.conf entry into the same position as in svn
(no functionality change since ffaac is marked buggy so only faad is
used by default regardless or order).
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@32571 b3059339-0415-0410-9bf9-f77b7e298cf2
add binary codecs for fourcc: IMM4, LZOC, DIRC, MHFY, MSA1
map vvvc fourcc to ffh264
works on the single vvvc sample from uncommon codecs list
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@31983 b3059339-0415-0410-9bf9-f77b7e298cf2
Found by the Debian QA tool 'lintian'
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@31913 b3059339-0415-0410-9bf9-f77b7e298cf2
reintroduce typo in genres.h that was fixed fixed r31913 to match the id3v2 spec
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@31920 b3059339-0415-0410-9bf9-f77b7e298cf2
Remove copy of old and ugly libgsm code and wrapper.
Decoding these formats is supported via FFmpeg both natively and
through libgsm.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@31657 b3059339-0415-0410-9bf9-f77b7e298cf2
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@31664 b3059339-0415-0410-9bf9-f77b7e298cf2
Currently not working since MPlayer requires edge emulation support.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@31542 b3059339-0415-0410-9bf9-f77b7e298cf2
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@31520 b3059339-0415-0410-9bf9-f77b7e298cf2
Place AUDIO_AAC_LATM definition next to AUDIO_AAC.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@31521 b3059339-0415-0410-9bf9-f77b7e298cf2
DirectShow codec).
Required changes:
- codecs.conf entry (of course).
- Allow opening files with “.col” in the file name, just like “vp3” and “.fpf”
already was allowed. (CineForm expects to be able to do this, presumably
for some color management code.)
- In registry.c, fake a few registry keys that the codec expects the installer
to have written. Also, change a few magic numbers (0, 2) to the appropriate
constants (ERROR_SUCCESS, ERROR_FILE_NOT_FOUND) where appropriate, so the code
is easier to follow.
SMP works fine, but seemingly performs suboptimally (e.g., on my dual-core
laptop, CineForm performs better if I lie to it and tell it I have four cores).
I don't know if this is inherent in the codec, or some inefficiency in the
emulated synchronization primitives.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@31196 b3059339-0415-0410-9bf9-f77b7e298cf2
for consitently naming all ffmpeg codecs
requested by compn
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@30977 b3059339-0415-0410-9bf9-f77b7e298cf2
This is a tentative change to give the decoder more testing;
it can always be reverted in short order if it turns out suboptimal.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@30918 b3059339-0415-0410-9bf9-f77b7e298cf2
FFmpeg now has an AMR-NB decoder, this avoids name clashes.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@30917 b3059339-0415-0410-9bf9-f77b7e298cf2
are in place.
Add codecs.conf entry for both codecs, and qt_comp.h entry for ProRes
(not used except for debugging, so mainly for completeness). Both work
with -demuxer mov only, as all other QuickTime binary codecs.
AIC support is for OS X only, and untested.
Split out from a patch Andrew Wason (r e c t a l o g i c <at> rectalogic
<dot> com) posted in June.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@30901 b3059339-0415-0410-9bf9-f77b7e298cf2
change ffsipr to working (and first choice by default) in codecs.conf
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@30318 b3059339-0415-0410-9bf9-f77b7e298cf2
add ffmpeg sipr / acelp.net decoder as buggy until 16k is supported
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@30274 b3059339-0415-0410-9bf9-f77b7e298cf2
This is meant as a test to see if we can possibly remove mp3lib at some point.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@30265 b3059339-0415-0410-9bf9-f77b7e298cf2
cehoyos
reimar
compn
Uoti Urpala
Uoti Urpala
diego
siretart
sesse
attila
conrad
Grigori Goronzy
kostya