This is not needed anymore, because we decided that the PAR of the
decoded video matters, and not the PAR of the filtered video that
arrives at the VO.
In theory, we can't really do this, because we don't know when a spdif
frame ends. Spdif transports compressed audio through audio setups that
were originally designed for PCM only (which includes the audio filter
chain, the AO API, most audio output APIs, etc.), and to reach this
goal, spdif pretends to be PCM. Compressed data frames are padded with
zeros, until a certain data rate is reached, which corresponds to a
pseudo-PCM format with 2 bytes per sample and 2 channels at 48000 Hz.
Of course an actual spdif frame is significantly larger than a frame
of the PCM format it pretends to be, so cutting audio data on frame
boundaries (as according to the pseudo-PCM format) merely yields an
incomplete and broken frame, not audio that plays for the desired
duration.
However, sending an incomplete frame might still be much better than the
current behavior, which simply ignores --end/--length (but still lets
the video end at the exact end time).
Should this result in trouble with real spdif receivers, this commit
probably has to be reverted.
If the --fps option was given (MPOpts->force_fps), the demuxer FPS value
was overwritten with the forced value. This was fine, since the demuxer
value wasn't needed anymore. But with the recent changes not to write to
the demuxer stream headers, we don't want to do this anymore. So
maintain the (forced/updated) FPS value in dec_video->fps.
The removed code in loadfile.c is probably redundant, and an artifact
from past refactorings.
Note that sub.c will now always use the demuxer FPS value, instead of
the user override value. I think this is fine, because it used the
demuxer's video size values too. (And it's rare that these values are
used at all.)
The only reason why these structs were dynamically allocated was to
avoid recursive includes in stheader.h, which is (or was) a very central
file included by almost all other files. (If a struct is referenced via
a pointer type only, it can be forward referenced, and the definition of
the struct is not needed.) Now that they're out of stheader.h, this
difference doesn't matter anymore, and the code can be simplified.
Also sneak in some sanity checks.
This used to be needed to access the generic stream header from the
specific headers, which in turn was needed because the decoders had
access only to the specific headers. This is not the case anymore, so
this can finally be removed again.
Also move the "format" field from the specific headers to sh_stream.
Use sh_stream over sh_sub. Use dec_sub (and mpctx->d_sub) instead of the
stream header. This aligns the subtitle code with the recent audio and
video refactoring.
sh_sub still has the decoder context, though. This is because we want to
avoid reinit when switching segments with ordered chapters. (Reinit is
fast, except for creating the ASS_Renderer, which in turn triggers
fontconfig.) Not sure how much this matters, though, because the initial
segment switch will lazily initialize the decoder anyway.
This is similar to the sh_audio commit.
This is mostly cosmetic in nature, except that it also adds automatical
freeing of the decoder driver's state struct (which was in
sh_video->context, now in dec_video->priv).
Also remove all the stheader.h fields that are not needed anymore.
This drops the --pp option, which was probably broken for a while. The
option automatically inserted the "pp" filter. The value passed to it
was ignored (which is probably broken, it always selected maximal
quality).
Inserting this filter can be done simply with --vf=pp, so this is not
needed anymore.
This means most code accessing this struct must now include hwdec.h
instead of dec_video.h. I just put it into dec_video.h at first because
I thought a separate file would be a waste, but it's more proper to do
it this way, as there are too many files which include dec_video.h only
to get the mp_hwdec_info definition.
This was printed before something was decoded, and thus was not really
correct. Also, this code is hilariously broken:
/* Assume FOURCC if all bytes >= 0x20 (' ') */
if (sh_audio->format >= 0x20202020)
mp_msg(MSGT_IDENTIFY, MSGL_INFO,
"ID_AUDIO_FORMAT=%.4s\n", (char *)&sh_audio->format);
Time to kill it.
This information can be accessed through properties instead.
sh_audio is supposed to contain file headers, not whatever was decoded.
Fix this, and write the decoded format to separate fields in the decoder
context, the dec_audio.decoded field. (Note that this field is really
only needed to communicate the audio format from decoder driver to the
generic code, so no other code accesses it.)
Move all state that basically changes during decoding or is needed in
order to manage decoding itself into a new struct (dec_audio).
sh_audio (defined in stheader.h) is supposed to be the audio stream
header. This should reflect the file headers for the stream. Putting the
decoder context there is strange design, to say the least.
This was forgotten when the parser for mplayer2 EDL files was removed.
Change the header of the mpv EDL format to include a '#', so a naive
parser could skip the header as comment. (Maybe this is questionable;
on the other hand, if it can be simpler, why not.)
Also, strip the header in demux_edl.c before passing on the data, so the
header check doesn't need to be duplicated in tl_mpv_edl.c.
Edit Decision Lists (EDL) allow combining parts from multiple source
files into one virtual file. MPlayer had an EDL format (which sucked),
which mplayer2 tried to improve with its own format (which sucked). As
logic demands, mpv introduces its very own format (which sucks).
The new format should actually be much simpler and easier to use, and
its implementation is simpler and smaller too.
The intention of the existing code was trying to match demuxer-reported
stream IDs, instead of using possibly arbitrary ordering of the frontend
track list. But EDL files can consist of quite different files, for
which trying to match the stream IDs doesn't always make sense.
This didn't have any consequences, other than suddenly reinitializing
video when it works again (such as with EDL timeline mixing video and
audio-only files).
The AF control commands used an elaborate and unnecessary organization
for the command constants. Get rid of all that and convert the
definitions to a simple enum. Also remove the control commands that
were not really needed, because they were not used outside of the
filters that implemented them.
Some decoders used to read packets and decode data when calling
resync_audio_stream(). This required a special case in mp_seek() for
audio. (A comment mentions liba52, which is long gone; but until
recently ad_mpg123.c actually exposed this behavior.)
No decoder does this anymore, and resync_audio_stream() works similar
as resync_video_stream(). Remove the special case.
When the decoder detects a format change, it overwrites the values
stored in sh_audio (this affects the members sample_format, samplerate,
channels). In the case when the old audio data still needs to be
played/filtered, the audio format as identified by sh_audio and the
format used for the decoder buffer can mismatch. In particular, they
will mismatch in the very unlikely but possible case the audio chain is
reinitialized while old data is draining during a format change.
Or in other words, sh_audio might contain the new format, while the
audio chain is still configured to use the old format.
Currently, the audio code (player/audio.c and init_audio_filters) access
sh_audio to get the current format. This is in theory incorrect for the
reasons mentioned above. Use the decoder buffer's format instead, which
should be correct at any point.
demuxer->filepos contains the byte offset of the last read packet. This
is so that the player can estimate the current playback position, if no
proper timestamps are available. Simplify it to use demux_packet->pos in
the generic demuxer code, instead of bothering every demuxer
implementation about it.
(Note that this is still a bit incorrect: it relfects the position of
the last packet read by the demuxer, not that returned to the user. But
that was already broken, and is not that trivial to fix.)
These use the _oldargs_ hack, which failed in combination with playback
resume. Make it work.
It would be better to port all filters to new option parsing, but that's
obviously too much work, and most filters will probably be deleted and
replaced by libavfilter in the long run.
Most libavcodec decoders output non-interleaved audio. Add direct
support for this, and remove the hack that repacked non-interleaved
audio back to packed audio.
Remove the minlen argument from the decoder callback. Instead of
forcing every decoder to have its own decode loop to fill the buffer
until minlen is reached, leave this to the caller. So if a decoder
doesn't return enough data, it's simply called again. (In future, I
even want to change it so that decoders don't read packets directly,
but instead the caller has to pass packets to the decoders. This fits
well with this change, because now the decoder callback typically
decodes at most one packet.)
ad_mpg123.c receives some heavy refactoring. The main problem is that
it wanted to handle format changes when there was no data in the decode
output buffer yet. This sounds reasonable, but actually it would write
data into a buffer prepared for old data, since the caller doesn't know
about the format change yet. (I.e. the best place for a format change
would be _after_ writing the last sample to the output buffer.) It's
possible that this code was not perfectly sane before this commit,
and perhaps lost one frame of data after a format change, but I didn't
confirm this. Trying to fix this, I ended up rewriting the decoding
and also the probing.
Before this commit, the af_instance->mul/delay values were in bytes.
Using bytes is confusing for non-interleaved audio, so switch mul to
samples, and delay to seconds. For delay, seconds are more intuitive
than bytes or samples, because it's used for the latency calculation.
We also might want to replace the delay mechanism with real PTS
tracking inside the filter chain some time in the future, and PTS
will also require time-adjustments to be done in seconds.
For most filters, we just remove the redundant mul=1 initialization.
(Setting this used to be required, but not anymore.)
Replace the code that used a single buffer with mp_audio_buffer. This
also enables non-interleaved output operation, although it's still
disabled, and no AO supports it yet.
Set the PulseAudio stream title, just like the VO window title is set.
Refactor update_vo_window_title() so that we can use it for AOs too.
The ao_pulse.c bit is stolen from MPlayer.
This member was redundant. sh_audio->sample_format indicates the sample
size already.
The TV code is a bit strange: the redundant sample size was part of the
internal TV interface. Assume it's really redundant and not something
else. The PCM decoder ignores the sample size anyway.
Note that the change in seek_reset is not entirely equivalent: we even
drop the remainder of buffered audio when seeking. This should be more
correct, because the whole point of the reset_ao parameter is to control
whether audio queued for output should be dropped or not.
ao_lavc.c accesses ao->buffer, which I consider internal. The access was
done in ao_lavc.c/uninit(), which tried to get the left-over audio in
order to write the last (possibly partial) audio frame. The play()
function didn't accept partial frames, because the AOPLAY_FINAL_CHUNK
flag was not correctly set, and handling it otherwise would require an
internal FIFO.
Fix this by making sure that with gapless audio (used with encoding),
the AOPLAY_FINAL_CHUNK is set only once, instead when each file ends.
Basically, move the hack in ao_lavc's uninit to uninit_player.
One thing can not be entirely correctly handled: if gapless audio is
active, we don't know really whether the AO is closed because the file
ended playing (i.e. we want to send the buffered remainder of the audio
to the AO), or whether the user is quitting the player. (The stop_play
flag is overwritten, fixing that is perhaps not worth it.) Handle this
by adding additional code to drain the AO and the buffers when playback
is quit (see play_current_file() change).
Test case: mpv avdevice://lavfi:sine=441 avdevice://lavfi:sine=441 -length 0.2267 -gapless-audio
We found that the stretching - although it usually improves the looks of
the fonts - is incorrect.
On DVD, subtitles can cover the full area of the picture, and they have
the same pixel aspect as the movie itself.
Too bad many commercially released DVDs use bitmap fonts made with the
wrong pixel aspect (i.e. assuming 1:1) - --stretch-dvd-subs will make
these more pretty then.
This removes "--hwdec=crystalhd".
I doubt anyone even tried to use this. But even if someone wants to
use it, the decoders can still be explicitly invoked with e.g.:
--vd=lavc:h264_crystalhd
The only advantage our special code provided was fallback to
software decoding. (But I'm not sure how the ffmpeg crystalhd
pseudo-decoder actually behaves.)
Removing this will allow some simplifications as soon as we don't need
vdpau_old.c anymore.
wm4
Stefano Pigozzi
Rudolf Polzer