A "watch later" command is now mapped to Shift+Q. This quits the player
and stores the playback state in a config file in ~/.mpv/watch_later/.
When calling the player with the same file again, playback is resumed
at that time position.
It's also possible to make mpv save playback state always on quit with
the --save-position-on-quit option. Likewise, resuming can be disabled
with the --no-resume-playback option.
This also attempts to save some playback parameters, like fullscreen
state or track selection. This will unconditionally override config
settings and command line options (which is probably not what you would
expect, but in general nobody will really care about this). Some things
are not backed up, because that would cause various problems. Additional
subtitle files, video filters, etc. are not stored because that would be
too hard and fragile. Volume/mute state are not stored because it would
mess up if the system mixer is used, or if the system mixer was
readjusted in the meantime.
Basically, the tradeoff between perfect state restoration and
complexity/fragility makes it not worth to attempt to implement
it perfectly, even if the result is a little bit inconsistent.
Allows stepping back one frame via the frame_back_step inout command,
bound to "," by default.
This uses the precise seeking facility, and a perfect frame index built
on the fly. The index is built during playback and precise seeking, and
contains (as of this commit) the last 100 displayed or skipped frames.
This index is used to find the PTS of the previous frame, which is then
used as target for a precise seek. If no PTS is found, the core attempts
to do a seek before the current frame, and skip decoded frames until the
current frame is reached; this will create a sufficient index and the
normal backstep algorithm can be applied.
This can be rather slow. The worst case for backstepping is about the
same as the worst case for precise seeking if the previous frame can be
deduced from the index. If not, the worst case will be twice as slow.
There's also some minor danger that the index is incorrect in case
framedropping is involved. For framedropping due to --framedrop, this
problem is ignored (use of --framedrop is discouraged anyway). For
framedropping during precise seeking (done to make it faster), we try
to not add frames to the index that are produced when this can happen.
I'm not sure how well that works (or if the logic is sane), and it's
sure to break with some video filters. In the worst case, backstepping
might silently skip frames if you backstep after a user-initiated
precise seek. (Precise seeks to do indexing are not affected.)
Likewise, video filters that somehow change timing of frames and do not
do this in a deterministic way (i.e. if you seek to a position, frames
with different timings are produced than when the position is reached
during normal playback) will make backstepping silently jump to the
wrong frame. Enabling/disabling filters during playback (like for
example deinterlacing) will have similar bad effects.
I doubt anyone needs to adjust hue on a frequent basis, and gamma is
much more useful.
Suggestions for more radical changes of key bindings are welcome
(there's a lot of useless crap mapped).
For all suboptions, "flat" options were available by separating the
parent option and the sub option with ":", e.g. "--rawvideo:w=123". Drop
this syntax and use "-" as separator. This means even suboptions are
available as normal options now, e.g. "--rawvideo-w=123". The old syntax
doesn't work anymore.
Note that this is completely separate from actual suboptions. For
example, "-rawvideo w=123:h=123" still works. (Not that this syntax is
worth supporting, but it's needed anyway, for for other things like vf
and vo suboptions.)
As a consequence of this change, we also have to add new "no-" prefixed
options for flag suboptions, so that "--no-input-default-bindings"
works. ("--input-no-default-bindings" also works as a consequence of
allowing "-input no-default-bindings" - they are handled by the same
underlying option.)
For --input, always use the full syntax in the manpage. There exist
suboptions other than --input (like --tv, --rawvideo, etc.), but since
they might be handled differently in the future, don't touch these yet.
M_OPT_PREFIXED becomes the default, so remove it. As a minor unrelated
cleanup, get rid of M_OPT_MERGE too and use the OPT_SUBSTRUCT() macro in
some places.
Unrelated: remove the duplicated --tv:buffersize option, fix a typo in
changes.rst.
This could write .edl files in MPlayer's format. Support for playing
these files has been removed from mplayer2 quite a while ago. (mplayer2
can play its own, "new" .edl format, but does not support writing it.)
Since this is a rather obscure functionality, and it's not really clear
how it should behave (e.g. what should it do if a new file is played),
and wasn't all that great to begin with (what if you made a mistake?
the "edl_mark" command sucks for editing), get rid of it.
Suggestions how to reimplement this in a nicer way are welcome. If it's
just about retrieving timecodes, this in input.conf will do:
KEY print_text "position: ${=time-pos}"
"screenshot" now maps to "screenshot subtitles" by default, instead of
"screenshot video". Swap the argument order: the more useful argument
should come first. Remove the compatibility aliases for numeric choices
(e.g. "screenshot 1 0" won't work anymore).
In input test mode, key bindings won't be executed, but are shown on the
OSD. The OSD includes various information, such as the name of the key,
the command itself, whether it's builtin, and the config file location
it was defined.
The input test mode can be enabled with "--input=test". No effort is
spent trying to react to key bindings that normally exit the player;
they are treated just like any other binding.
This changes the name of this project to mpv. Most user-visible mentions
of "MPlayer" and "mplayer" are changed to "mpv". The binary name and the
default config file location are changed as well.
The new default config file location is: ~/.mpv/
Remove etc/mplayer.desktop. Apparently this was for the MPlayer GUI,
which has been removed from mplayer2 ages ago.
We don't have a logo, and the MS Windows resource files sort-of require
one, so leave etc/mplayer.ico/.xpm as-is.
Remove the debian and rpm packaging scripts. These contained outdated
dependencies and likely were more harmful than useful. (Patches which
add working and well-tested packaging are welcome.)
Allow the values "up" and "down" as step argument for the cycle input
command. Previously, this argument was a float, which specified an
arbitrary step value and direction (similar to the add command).
Instead of "1" and "-1", "up" and "down" is to be used.
Float values are still accepted. That capability might be removed in the
future, as there's probably hardly any actual use for arbitrary step
values.
The OSD bar is very annoying when seeking. Especially when the seeks
are very small, the OSD doesn't show any interesting information. The
exact seeking commands are a use case where the user definitely never
wants to see a seek bar.
Allow using the choice type (as it used for command line) for arguments
of input commands. Change the magic integer arguments of some commands
(like seek) to use choices instead. The old numeric values are still
allowed (but only those which made sense before, not arbitrary
integers).
In order to do this, remove the input.c specific types (like
MP_CMD_ARG_INT) completely and specify commands using the m_option
types.
Also, add the special choice "-" to some arguments. It's supposed to
signify the default value, so arguments can be easily skipped. Maybe the
choice option should recognize this and not change the previous value,
but we'll leave this for later.
For now, leave compatibility integer values for all new choice
arguments, e.g. "0" maps to 0. We could let the choice option type do
this automatically, but we don't, because we want user input values and
internal mplayer values decoupled in general. The compatibility options
will be removed one day, too.
Also, remove optional args for strings - would require either annoying
additional code, or copying strings twice. It's not used, so remove it.
Previously, both the command parser and property expansion
(m_properties_expand_string) handled escapes with '\'. Move all escape
handling into the command parser, and remove it from the property code.
This removes the need to escape strings twice for commands that use
property expansion.
The command parser is practically rewritten: it uses m_option for the
actual parsing, and reduces hackish C-string handling.
Now it depends on the command whether a property wraps around, or stops
at min/max valid property value.
For practically all properties, it's quite unambiguous what the "switch"
command should have done, and there's technically no need to replace it
with these new commands. More over, most properties that cycle are
boolean anyway. But it seems more orthogonal to make the difference
explicit, rather than hardcoding it. Having different commands also
makes it more explicit to the user what these commands do, both just due
to the naming, and what wrapping policy is used. The code is simpler
too.
Replace --hardframedrop with --framedrop=hard. Rename the framedrop
property from "framedropping" to "framedrop" for the sake of making
command line options have the same name as their corresponding
property. Change the property to accept choice values instead of
numeric values.
Remove unused/forgotten auto_quality variable.
osd_show_[property_]text => show_text
osd_show_progression => show_progress
show_text, osd_show_property_text and osd_show_text both map to the
code for the previous osd_show_property_text. The only special thing
about osd_show_text is that you don't need to escape "$". Also,
unfortunately osd_show_property_text requires escaping things twice,
one time for the command parser, and the other time for the property
formatting code, while osd_show_text needed only one level of escaping.
Use "-" instead of "_" in property names. The intent is that property
names and options names should be the same (if they refer to the same
thing), and options use "-" as word separator.
Rename some other properties too, e.g. "switch_audio" -> "audio".
Add a way to translate the old property names to the new ones, similar
to the input command legacy bridge.
Update input.conf. Use the new property names, and don't use legacy
commands.
It can't be re-implemented, because this isn't supported by libass. The
-subalign option and the associated sub-align slave property did
nothing. Remove them.
Add a new slave property which switches the current Matroska edition.
Since each edition can define an entirely new timeline, switching the
edition will simply restart playback at the beginning of the file with
the new edition selected.
Add 'E' as new keybinding to step the edition property.
DVD titles are still separate. Apparently they work similarly, but I
don't have any multi-title DVDs for testing. Also, cdda (for audio CDs)
uses the same mechanism as DVDs to report a number of titles, so there
seems to be confusion what exactly this mechanism is supposed to do.
That's why the edition code is completely separate for now.
Remove demuxer.num_titles. It was just a rather useless cache for the
return value of the DVD titles related STREAM_CTRL.
One rather obscure corner case isn't taken care of: if the ordered
chapters file has file local options set, they are reset on playback
restart. This is unexpected, because edition switching is meant to
behave like seeking back to the beginning of the file.
When the internal mplayer MPEG demuxer was removed (commit 1fde09db),
the default demuxer when using dvdnav was set to libavformat. Now it
turns out that this doesn't work with libavformat. It will terminate
playback right after the audio runs out (instead of looping it like the
video, or whatever it's supposed to do). I'm not sure what exactly the
problem is, but since 1. even mplayer-svn can't handle DVD menus
directly (missing highlights), 2. DVD menus are essentially worthless,
and 3. I don't directly watch DVDs, don't bother with it and remove it.
For basic playback, there's still libdvdread support.
Also, use pkg-config for libdvdread, and drop support for in-tree
libdvdread. Remove support for in-tree libdvdcss as well.
Teletext requires special OSD support. Because I can't even test
teletext, I can't restore support for it. Since teletext can be
considered ancient and obscure, and since it doesn't make sense to keep
the remaining teletext code without being able to use it, I'm removing
it.
Summary:
- There is no playtree anymore. It's reduced to a simple list.
- Options are now always global. You can still have per-file options,
but these are optional and require special syntax.
- The slave command pt_step has been removed, and playlist_next
and playlist_prev added. (See etc/input.conf changes.)
This is a user visible incompatible change, and will break slave-mode
applications.
- The pt_clear slave command is renamed to playlist_clear.
- Playtree entries could have multiple files. This is not the case
anymore, and playlist entries have always exactly one entry. Whenever
something adds more than one file (like ASX playlists or dvd:// or
dvdnav:// on the command line), all files are added as separate
playlist entries.
Note that some of the changes are quite deep and violent. Expect
regressions.
The playlist parsing code in particular is of low quality. I didn't try
to improve it, and merely spent to least effort necessary to keep it
somehow working. (Especially ASX playlist handling.)
The playtree code was complicated and bloated. It was also barely used.
Most users don't even know that mplayer manages the playlist as tree,
or how to use it. The most obscure features was probably specifying a
tree on command line (with '{' and '}' to create/close tree nodes). It
filled the player code with complexity and confused users with weird
slave commands like pt_up.
Replace the playtree with a simple flat playlist. Playlist parsers that
actually return trees are changed to append all files to the playlist
pre-order.
It used to be the responsibility of the playtree code to change per-file
config options. Now this is done by the player core, and the playlist
code is free of such details.
Options are not per-file by default anymore. This was a very obscure and
complicated feature that confused even experienced users. Consider the
following command line:
mplayer file1.mkv file2.mkv --no-audio file3.mkv
This will disable the audio for file2.mkv only, because options are
per-file by default. To make the option affect all files, you're
supposed to put it before the first file.
This is bad, because normally you don't need per-file options. They are
very rarely needed, and the only reasonable use cases I can imagine are
use of the encode backend (mplayer encode branch), or for debugging. The
normal use case is made harder, and the feature is perceived as bug.
Even worse, correct usage is hard to explain for users.
Make all options global by default. The position of an option isn't
significant anymore (except for options that compensate each other,
consider --shuffle --no-shuffle).
One other important change is that no options are reset anymore if a
new file is started. If you change settings with slave mode commands,
they will not be changed by playing a new file. (Exceptions include
settings that are too file specific, like audio/subtitle stream
selection.)
There is still some need for per-file options. Debugging and encoding
are use cases that profit from per-file options. Per-file profiles (as
well as per-protocol and per-VO/AO options) need the implementation
related mechanisms to backup and restore options when the playback file
changes.
Simplify the save-slot stuff, which is possible because there is no
hierarchical play tree anymore. Now there's a simple backup field.
Add a way to specify per-file options on command line. Example:
mplayer f1.mkv -o0 --{ -o1 f2.mkv -o2 f3.mkv --} f4.mkv -o3
will have the following options per file set:
f1.mkv, f4.mkv: -o0 -o3
f2.mkv, f3.mkv: -o0 -o3 -o1 -o2
The options --{ and --} start and end per-file options. All files inside
the { } will be affected by the options equally (similar to how global
options and multiple files are handled). When playback of a file starts,
the per-file options are set according to the command line. When
playback ends, the per-file options are restored to the values when
playback started.
Support for this is rather simple, and some combinations of modifiers
and keys don't work. For example, Ctrl+Alt+character is not supported,
because Windows doesn't emit a WM_CHAR in this case.
Also add support for the pause and print screen keys. Remove the
pointless KEY_CTRL translation. Remove KEY_CTRL altogether, because it
was not clear what it was actually supposed to mean.
There were some slight differences between what input.conf mapped, and
what was in input.c def_cmd_binds[]. Make them match.
Add some minor documentation improvements in input.cfg.
Also remove double comments ('##'), because they were confusing.
Something like the OSD menu functionality could be useful. However the
current implementation has several problems and would require a
relatively large amount of work to get into good shape. As far as I
know there are few users of the existing functionality. Nobody is
working on the existing code and keeping it compiling at all while
changing other code would require extra work. So delete the menu code
and some related code elsewhere that's used by nothing else.
Add option --ass-vsfilter-aspect-compat and corresponding property
ass_vsfilter_aspect_compat. The setting controls whether to enable the
emulation of traditional VSFilter behavior where subtitles are
stretched if the video is anamorphic (previously always enabled for
native SSA/ASS subtitles). Enabled by default. Add 'V' as a new
default keybinding to toggle the property.
Add support for binding commands to modifier+key combinations like
"Shift+Left" or "Ctrl+Alt+x", and support reading such combinations
from the output window of X VOs.
The recognized modifier names are Shift, Ctrl, Alt and Meta. Any
combination of those and then a non-modifier key name, separated by
'+', is accepted as a key name in input.conf. For non-special keys
that produce characters shift is ignored as a modifier. For example
"A" is handled as a key without modifiers even if you use shift to
write the capital letter; 'a' vs 'A' already distinguishes the
combinations with a normal keymap, and having separate 'a', 'Shift+A'
and 'A' (written with caps lock for example) would bring more
confusion than benefit.
Currently reading the modifier+key combinations is only supported in
the output window of those VOs that use x11_common.c event
handling. It's not possible to input the key combinations in other VOs
or in a terminal window.
The GUI is badly designed and too closely coupled to the internal
details of other code. The GUI code is in bad shape and unmaintained
for years. There is no indication that anyone would maintain it in the
future either. Even if someone did volunteer to implement a better
integrated GUI having the current code in the tree probably wouldn't
help much. So get rid of it.
Parameters now use a string much more intuitive than previous int value.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@27100 b3059339-0415-0410-9bf9-f77b7e298cf2
It is particularly useful for laptops users that obviously do
not have a keypad ;-)
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@26761 b3059339-0415-0410-9bf9-f77b7e298cf2
