Drawing the bar with vector drawings (instead with characters from the
OSD font) offers more flexibility and looks better. This also adds
chapter marks to the OSD bar, which are visible as small triangles on
the top and bottom inner border of the bar.
Change the default position of the OSD bar below the center of the
screen. This is less annoying than putting the bar directly into the
center of the view, where it obscures the video. The new position is
not quite on the bottom of the screen to avoid collisions with
subtitles.
The old centered position can be forced with ``--osd-bar-align-y=0``.
Also make it possible to change the OSD bar width/height with the new
--osd-bar-w and --osd-bar-h options.
It's possible that the new OSD bar renders much slower than the old
one. There are two reasons for this: 1. the character based bar
allowed libass to cache each character, while the vector drawing forces
it to redraw every time the bar position changes. 2., the bar position
is updated at a much higher granularity (the bar position is passed
along as float instead of as integer in the range 0-100, so the bar
will be updated on every single video frame).
The old names have been deprecated a while ago, but were needed for
supporting older ffmpeg/libav versions. The deprecated identifiers
have been removed from recent Libav and FFmpeg git.
This change breaks compatibility with Libav 0.8.x and equivalent
FFmpeg releases.
Removes almost every global variabel in vo.h and puts them in a special struct
in MPOpts for video output related options.
Also we completly remove the options/globals pts and refresh rate because
they were unused.
OPT_BASE_STRUCT defines which struct the OPT_ macros (like OPT_INT etc.)
reference implicitly, since these macros take struct member names but no
struct type. Normally, only cfg-mplayer.h should need this, and other
places shouldn't be bothered with having to #undef it.
(Some files, like demux_lavf.c, still store their options in MPOpts. In
the long term, this should be removed, and handled like e.g. with VO
suboptions instead.)
Recent changes to the OSD code made vo_caca crash when showing OSD.
Since this is a joke VO (== I'd rather not waste my time with it),
remove the OSD support. It wasn't that great anyway.
Seeks can be performed with OSD bar invisible (e.g. "osd-msg seek ..."
command), and then an already visible bar won't be updated. But the bar
will stick around until the OSD text is hidden. This is confusing, so
change it that the bar is updated. (Making the bar disappear on such
seeks would require much more changes, so we're lazy and go with this
commit.)
Image areas with subtitles are upsampled to 4:4:4 in order to render
the subtitles (makes blending easier). Try not to copy the Y plane on
upsampling. The libswscale API requires this, but this commit works it
around by scaling the chroma planes separately as AV_PIX_FMT_GRAY8. The
Y plane is not touched at all. This is done for 420p8 only, which is the
most commonly needed case. For other formats, the old way is used.
Seems to make ASS rendering faster about 15% in the setup I tested.
Allocate it even if it's needed. The actually done work is almost the
same, except that the code is a bit simpler. May need more memory at
once for RGB subs that use more than one part, which is rare.
In order to support OSD redrawing for vo_xv and vo_x11, draw_bmp.c
included an awkward "backup" mechanism to copy and restore image
regions that have been changed by OSD/subtitles.
Replace this by a much simpler mechanism: keep a reference to the
original image, and use that to restore the Xv/X framebuffers.
In the worst case, this may increase cache pressure and memory usage,
even if no OSD or subtitles are rendered. In practice, it seems to be
always faster.
It's not easy to tell whether the OSD/subs are empty, or if something is
drawn. In general you have to use osd_draw() with a custom callback. If
nothing is visible, the callback is never invoked. (The actual reason
why this is so "hard" is the implementation of osd_libass.c, which
doesn't allow separating rendering and drawing of OSD elements, because
all OSD elements share the same ASS_Renderer.)
To simplify avoiding copies, make osd_draw_on_image() instead of the
caller use mp_image_make_writeable(). Introduce osd_draw_on_image_p(),
which works like osd_draw_on_image(), but gets the new image allocation
from an image pool. This is supposed to be an optimization, because it
reduces the frequency of large allocations/deallocations for image data.
The result of this is that the frequency of copies needed in conjunction
with vf_sub, screenshots, and vo_lavc (encoding) should be reduced.
vf_sub now always does true pass-through if no subs are shown.
Drop the pts check from vf_sub. This didn't make much sense.
Even though #ifdef ACCURATE is removed, the result should be about the
same. The fallback is only used by packed YUV formats (YUYV, NV12), and
doing 16 bit for them instead of 8 bit is not useful.
A side effect is that Y8 (gray) is not converted drawing subs, and for
alpha formats, the alpha plane is not removed. This means the number of
planes after upsampling can be 1-4 (1: gray, 2: gray+alpha, 3: planar,
4: planar+alpha). The code has to be adjusted accordingly to work on the
color planes only. Also remove the workaround for the chroma shift 31
hack.
mp_image_alloc_planes() allocated images with minimal stride, even if
the resulting stride was unaligned. It was the responsibility of
vf_get_image() to set an image's width to something larger than
required to get an aligned stride, and then crop it. Always allocate
with aligned strides instead.
Get rid of IMGFMT_IF09 special handling. This format is not used
anymore. (IF09 has 4x4 chroma sub-sampling, and that is what it was
mainly used for - this is still supported.) Get rid of swapped chroma
plane allocation. This is not used anywhere, and VOs like vo_xv,
vo_direct3d and vo_sdl do their own swapping.
Always round chroma width/height up instead of down. Consider 4:2:0 and
an uneven image size. For luma, the size was left uneven, and the chroma
size was rounded down. This doesn't make sense, because chroma would be
missing for the bottom/right border.
Remove mp_image_new_empty() and mp_image_alloc_planes(), they were not
used anymore, except in draw_bmp.c. (It's still allowed to setup
mp_images manually, you just can't allocate image data with them
anymore - this is also done in draw_bmp.c.)
Setting the size of a mp_image must be done with mp_image_set_size()
now. Do this to guarantee that the redundant fields (like chroma_width)
are updated consistently. Replacing the redundant fields by function
calls would probably be better, but there are too many uses of them,
and is a bit less convenient.
Most code actually called mp_image_setfmt(), which did this as well.
This commit just makes things a bit more explicit.
Warning: the video filter chain still sets up mp_images manually,
and vf_get_image() is not updated.
Before this commit, the --osd-* options (like --osd-font-size etc.)
configured both the OSD and subtitle font. Make them separate, and add
--sub-text-* options (like --sub-text-size etc.). Now --osd-* affects
the OSD font only, and --sub-text-* unstyled text subtitles only.
The warnings in demux_mpg were silenced by additional no-operation
casts.
A variable in ass_mp was used only for some versions of libass; now the
declaration is in that version #ifdef too to avoid a compiler warning.
Add `mp_find_config_file` to search different known paths and use that in
ass_mp to look for the fontconfig configuration file.
Some incidental changes spawned by this feature where:
* Buffer allocation for the strings containing the paths is now performed
with talloc. All of the allocations are done on a NULL context, but it still
improves readability of the code.
* Move the OSX function for lookup inside of a bundle: this code path was
currently not used by the bundle generated with `make osxbundle`. The plan
is to use it again in a future commit to get a fontconfig config file.
This allows to use a fontconfig fonts.conf that is customized for mpv. The
configuration file is assumed to be located at `~/.mpv/fonts.conf`. If not
found the default fcontconfig config file is used.
Keep the currently displayed subtitles even when the user cycles through
subtitle tracks, and the subtitle is decoded by libavcodec (such as
vobsubs). Do this by not clearing the subtitles on reset(). reset() is
also called on seek, so check the start PTS whether the subtitle should
really be displayed (there's already an end PTS). Note that sd_ass does
essentially something similar.
The existing code has checks for whether the PTS reported by the demuxer
is invalid (MP_NOPTS_VALUE). I don't know under what circumstances this
can happens, so fall back to the old behavior if the PTS is invalid.
ffmpeg recently added a demuxer that can read vobsubs (pairs of .sub and
.idx files). Get rid of the internal vobsub reader, and use the ffmpeg
demuxer instead.
Sneak in an unrelated manpage change (autosub default).
libavformat demuxes ass subtitles in a broken way, that forces the
player to throw away all subtitle events received so far. See mplayer
svn commit 31293.
The subreader.c ASS parser (used when playing an external ASS subtitle
file with --no-ass for "plaintext" display) hardcodes dialogue line
syntax instead of correctly reading it from the "Format: " line in the
file, but tried to support a varying amount of fields by guessing
where the text field (which should be last) begins. This guessing code
was buggy in many ways. Remove it and hardcode skipping 9 commas
before the text field, which should work for most files. I don't
consider the --no-ass case important enough to implement correct
parsing now. Also fix the code removing formatting tags, which failed
to remove the second in a pair of two consecutive tags.
Conflicts:
sub/subreader.c
Merged from mplayer2 commit 91f516. Essentially reverts d5b964.
Remove the options --utf8 and --unicode which had no effect any more
(what they once did should be doable with --subcp). The only use of
corresponding variables left in code was subreader.c code using
sub_utf8 as a flag indicating whether iconv conversion was active.
Change the code to test the existence of iconv context instead.
Conflicts:
DOCS/man/en/options.rst
core/cfg-mplayer.h
sub/sub.c
sub/sub.h
sub/subreader.c
Merged from mplayer2 commit ea7311.
Note: --unicode was already removed
Based on a patch by qyot27. Add the missing parts in mp_get_chroma_shift(),
which allow allocation of such images, and which make vo_opengl
automatically accept the new formats. Change the IMGFMT_IS_YUVP16_LE/BE
macros to properly report IMGFMT_444P14 as supported: this pixel format
has the highest numerical bit width identifier (0x55), which is not
covered by the mask ~0xfc. Remove 1 bit from the mask (makes it 0xf8) so
that IMGFMT_IS_YUVP16(IMGFMT_444P14) is 1. This is slightly risky, as
the organization of the image format IDs (actually FourCCs + mplayer
internal IDs) is messy at best, but it should be ok.
The following HEX formats are now parsed correctly: `#RRGGBB`, `RRGGBB`.
Moreover this implementation doesn't show the HTML on screen if the input
color is not recognized. A warning is still displayed in the terminal.
MPlayer/mplayer2 still show DVD subtitles in gray. Depending on who you
ask, this can be considered a bug or a feature. Include rendering in
gray as explicit feature, so the user can decide what is better.
This affects all indexed sub bitmaps entering the OSD rendering path.
Currently, this means all image subs are affected by this option, but
nothing else.
Apparently the -spugauss option was popular. The code originally
implementing this is gone (scaler stuff in spudec.c). Reimplement it
using libswscale to scale and blur image subtitles if the --sub-gauss
option is set.
The code does some rather lazy padding to allow the blur to spread
pixels past the original image bounding box. (This problem exists with
normal bilinear scaling too, but is barely noticable.)
Technically, this doesn't just blur subtitles, but anything RGBA (or
indexed) that enters the OSD rendering path. But only image subtitles
produce these OSD formats currently, so no explicit check is done to
prevent blurring in other cases.
As pointed out in commit ed01df, the quality loss due to frequent
conversion between RGB and YUV is too much when drawing OSD and
subtitles.
Fix this by staying in the same colorspace when drawing subtitles.
Render directly to RGB, without converting to YUV first.
The bad thing about packed RGB is that there are many pixel formats,
which would all require special code for blending. It's also completely
incompatible to planar YUV. Use planar RGB instead, which allows us to
reuse all code originally written for planar YUV. The only thing that
needs to be changed is the color conversion in the libass case. (In
exchange for simpler code, the image has to be copied, but this is
still much better than converting to YUV.)
Unfortunately, libswscale doesn't support planar RGB output. Add a hack
to sws_utils.c to handle conversion to planar RGB. In the common case,
when converting 32 bit per pixel RGB, calling swscale can be avoided
entirely.
The change in mp_image.c is needed to allocate GBRP images correctly.
(The issue with vo_x11 could be easily solved by always backing up the
same bounding box as the bitmap drawing RGB<->YUV conversion does, but
this commit is probably the better fix.)
Without this change, fields that can be sometimes empty and
sometimes not, such as the Effect field, are counted in an
inconsistent way. Since the number of fields is used to find
where the text starts, it leads to internal field arriving
on the video.
Bug reported anonymously on the users mailing list.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@35426 b3059339-0415-0410-9bf9-f77b7e298cf2
In order to improve performance, vo_xv didn't create a backup of the
video frame before drawing OSD and subtitles during normal playback. It
required the frontend to do frame stepping if it wanted to redraw the
OSD, but no backup of the video frame was available. (Consider the
following use case: enable the OSD permanently with --osd-level=3, then
pause during playback and do something that shows an OSD message. The
player will advance the video by one frame at the time the new OSD
message is first drawn.)
This also meant that taking a screenshot during playback with vo_xv
would include OSD and subtitles in the resulting image.
Fix this by always creating a backup before drawing OSD or subtitles.
In order to avoid having to create a full copy of the whole image frame,
introduce a complex scheme that tries to backup only the changed
regions.
It's unclear whether the additional complexity in draw_bmp.c for
backing up only the changed areas of the frame is worth it. Possibly
a simpler implementation would suffice, such as tracking only Y ranges
of changed image data, or even just copying the full frame.
vo_xv's get_screenshot() now always creates a copy in order not to
modify the currently displayed frame.
Make more aspects of the OSD font customizable. This also affects the
font used for unstyled subtitles (such as SRT), or when using the
--no-ass option. This adds back some customizability that was lost with
commit 74e7a1 (osd: use libass for OSD rendering).
Removed options:
--ass-border-color
--ass-color
--font
--subfont
--subfont-text-scale
Added options:
--osd-color
--osd-border
--osd-back-color
--osd-shadow-color
--osd-font
--osd-font-size
--osd-border-size
--osd-margin-x
--osd-margin-y
--osd-shadow-offset
--osd-spacing
--sub-scale
The font size is now specified in pixels as it would be rendered on a
window with a height of 720 pixels. OSD and subtitles are always scaled
with the window height, so specifying or expecting an absolute font
size doesn't make sense.
Such scaled pixel units are used to specify font border etc. as well.
(Note: the font size is directly passed to libass. How the fonts are
actually rasterized is outside of our control, but in theory ASS font
sizes map to "script" pixels and then are scaled to screen size.)
The default settings should be about the same, with slight difference
due to rounding to the new scales.
The OSD and subtitle fonts are not separately configurable. It has
limited use and would double the number of newly added options, which
would be more confusing than helpful. It could be easily added later,
should the need arise.
Other small details that change:
- ASS_Style.Encoding is not set to -1 for subs anymore
(assuming subs use VSFilter direction in -no-ass mode too)
- use a different WrapStyle for OSD
- ASS forced styles are not applied to OSD
wm4
Alexander Preisinger
Stefano Pigozzi
Rudolf Polzer
Uoti Urpala
Stephen Hutchinson
cigaes