Fully fixes behavior of the files mentioned in the previous commit. Will
probably lead to worse behavior if someone tries to fix real video and
cover art tracks, but that's a broken fringe case anyway.
The new_segment field was used to track the decoder data flow handler of
timeline boundaries, which are used for ordered chapters etc. (anything
that sets demuxer_desc.load_timeline). This broke seeking with the
demuxer cache enabled. The demuxer is expected to set the new_segment
field after every seek or segment boundary switch, so the cached packets
basically contained incorrect values for this, and the decoders were not
initialized correctly.
Fix this by getting rid of the flag completely. Let the decoders instead
compare the segment information by content, which is hopefully enough.
(In theory, two segments with same information could perhaps appear in
broken-ish corner cases, or in an attempt to simulate looping, and such.
I preferred the simple solution over others, such as generating unique
and stable segment IDs.)
We still add a "segmented" field to make it explicit whether segments
are used, instead of doing something silly like testing arbitrary other
segment fields for validity.
Cached seeking with timeline stuff is still slightly broken even with
this commit: the seek logic is not aware of the overlap that segments
can have, and the timestamp clamping that needs to be performed in
theory to account for the fact that a packet might contain a frame that
is always clipped off by segment handling. This can be fixed later.
Needed for a failed thing, leaving it anyway because it causes no harm
and might be less awkward if struct virtual_stream is possibly extended
anyway in the future.
Seems like most code dealing with this was for setting it in redundant
cases. Now SEEK_BACKWARD is redundant, and SEEK_FORWARD is the odd one
out.
Also fix that SEEK_FORWARD was not correctly unset in try_seek_cache().
In demux_mkv_seek(), make the arbitrary decision that a video stream is
not required for the subtitle prefetch logic to be active. We might want
subtitles with long duration even with audio only playback, or if the
file is used as external subtitle.
Similar purpose as f34e1a0dee.
Somehow this is much more natural too, and needs less code.
This breaks runtime updates to duration. This could easily be fixed, but
no important demuxer does this anyway. Only demux_raw and demux_disc
might (the latter for BD/DVD). For the latter it might actually have
some importance when changing titles at runtime (I guess?), but guess
what, I don't care.
This is more uniform, and potentially gets rid of some past copyrights.
It might be that this subtly changes caching behavior (it seems before
this, it synced to the demuxer if the length was unknown, which is not
what we want.)
We use the metadata provided by youtube-dl to sort-of implement
fragmented DASH streaming.
This is all a bit hacky, but hopefully a makeshift solution until
libavformat has proper mechanisms. (Although in danger of being one
of those temporary hacks that become permanent.)
Instead of enabling it only when a stream-cache is enabled, also try to
enable it independently from that if the demuxer is marked as
is_network.
Also add some code to the EDL code, so EDLs containing network streams
are automatically cached this way.
Extend the OSD info line so that it shows the demuxer cache in this case
(more or less).
I didn't find where or whether options.rst describes how the demuxer
cache is enabled, so no changes there.
This is needed to put the decoders into the correct state. In
particular, decoders will not initialize the current segment without
this flag. The intention of not setting the flag for seeks within the
segments were to avoid costly decoder reinits, but it seems this is
better handled explicitly in the decoder wrappers.
Play a trick to make the packet pos field monotonically increasing over
segment boundaries if the source demuxers return monotonically
increasing pos values. This allows the demuxer to uniquely identify
packets with the pos field, and can do refresh seeks using that.
Normally, the packet pos field is used as a fallback for determining the
playback position if the demuxer returns no proper duration. But
demux_timeline.c always will, and the packet pos fields usually make no
sense in relation to the returned file size anyway if the timeline
source demuxers originate from separate streams.
When switching tracks, we normally have the problem that data gets lost
due to readahead buffering. (Which in turn is because we're stubborn and
instruct the demuxers to discard data on unselected streams.) The
demuxer layer has a hack that re-reads discarded buffered data if a
stream is enabled mid-stream, so track switching will seem instant.
A somewhat similar problem is when all tracks of an external files were
disabled - when enabling the first track, we have to seek to the target
position.
Handle these with the same mechanism. Pass the "current time" to the
demuxer's stream switch function, and let the demuxer figure out what to
do. The demuxer will issue a refresh seek (if possible) to update the
new stream, or will issue a "normal" seek if there was no active stream
yet.
One case that changes is when a video/audio stream is enabled on an
external file with only a subtitle stream active, and the demuxer does
not support rrefresh seeks. This is a fuzzy case, because subtitles are
sparse, and the demuxer might have skipped large amounts of data. We
used to seek (and send the subtitle decoder some subtitle packets
twice). This case is sort of obscure and insane, and the fix would be
questionable, so we simply don't care.
Should mostly fix#3392.
SEEK_HR is interpreted by demux_mkv.c, and enables subtitle preroll by
prefetching additional subtitle pakcets which might overlap with the
seek destination. This should make the case work when segment boundaries
fall into the middle of subtitle events.
This still usually leaves a flicker of at least 1 frame on start,
because dec_sub.c does not ensure that enough subtitles are read before
rendering after a segment switch. (Probably a WONTFIX.)
Ever since a change in mplayer2 or so, relative seeks were translated to
absolute seeks before sending them to the demuxer in most cases. The
only exception in current mpv is DVD seeking.
Remove the SEEK_ABSOLUTE flag; it's not the implied default. SEEK_FACTOR
is kept, because it's sometimes slightly useful for seeking in things
like transport streams. (And maybe mkv files without duration set?)
DVD seeking is terrible because DVD and libdvdnav are terrible, but
mostly because libdvdnav is terrible. libdvdnav does not expose seeking
with seek tables. (Although I know xbmc/kodi use an undocumented API
that is not declared in the headers by dladdr()ing it - I think the
function is dvdnav_jump_to_sector_by_time().) With the current mpv
policy if not giving a shit about DVD, just revert our half-working seek
hacks and always use dvdnav_time_search(). Relative seeking might get
stuck sometimes; in this case --hr-seek=always is recommended.
This is achieved indirectly by deslecting all streams for the non-
current segment (and if the segment doesn't share the demuxer with the
currently active one).
Restores functionality added with commit 46bcdb70.
This uses a different method to piece segments together. The old
approach basically changes to a new file (with a new start offset) any
time a segment ends. This meant waiting for audio/video end on segment
end, and then changing to the new segment all at once. It had a very
weird impact on the playback core, and some things (like truly gapless
segment transitions, or frame backstepping) just didn't work.
The new approach adds the demux_timeline pseudo-demuxer, which presents
an uniform packet stream from the many segments. This is pretty similar
to how ordered chapters are implemented everywhere else. It also reminds
of the FFmpeg concat pseudo-demuxer.
The "pure" version of this approach doesn't work though. Segments can
actually have different codec configurations (different extradata), and
subtitles are most likely broken too. (Subtitles have multiple corner
cases which break the pure stream-concatenation approach completely.)
To counter this, we do two things:
- Reinit the decoder with each segment. We go as far as allowing
concatenating files with completely different codecs for the sake
of EDL (which also uses the timeline infrastructure). A "lighter"
approach would try to make use of decoder mechanism to update e.g.
the extradata, but that seems fragile.
- Clip decoded data to segment boundaries. This is equivalent to
normal playback core mechanisms like hr-seek, but now the playback
core doesn't need to care about these things.
These two mechanisms are equivalent to what happened in the old
implementation, except they don't happen in the playback core anymore.
In other words, the playback core is completely relieved from timeline
implementation details. (Which honestly is exactly what I'm trying to
do here. I don't think ordered chapter behavior deserves improvement,
even if it's bad - but I want to get it out from the playback core.)
There is code duplication between audio and video decoder common code.
This is awful and could be shareable - but this will happen later.
Note that the audio path has some code to clip audio frames for the
purpose of codec preroll/gapless handling, but it's not shared as
sharing it would cause more pain than it would help.
wm4