Until now, .edl files accepted only "simple" filenames, i.e. no relative
or absolute paths, no URLs. Now that the origin bullshit is a bit
cleaned up and enforced in the EDL code, there's absolutely no reason to
keep this.
The new code behaves somewhat similar to playlists. (Although playlists
are special because they're not truly recursively opened.)
mpv has a very weak and very annoying policy that determines whether a
playlist should be used or not. For example, if you play a remote
playlist, you usually don't want it to be able to read local filesystem
entries. (Although for a media player the impact is small I guess.)
It's weak and annoying as in that it does not prevent certain cases
which could be interpreted as bad in some cases, such as allowing
playlists on the local filesystem to reference remote URLs. It probably
barely makes sense, but we just want to exclude some other "definitely
not a good idea" things, all while playlists generally just work, so
whatever.
The policy is:
- from the command line anything is played
- local playlists can reference anything except "unsafe" streams
("unsafe" means special stream inputs like libavfilter graphs)
- remote playlists can reference only remote URLs
- things like "memory://" and archives are "transparent" to this
This commit does... something. It replaces the weird stream flags with a
slightly clearer "origin" value, which is now consequently passed down
and used everywhere. It fixes some deviations from the described policy.
I wanted to force archives to reference only content within them, but
this would probably have been more complicated (or required different
abstractions), and I'm too lazy to figure it out, so archives are now
"transparent" (playlists within archives behave the same outside).
There may be a lot of bugs in this.
This is unfortunately a very noisy commit because:
- every stream open call now needs to pass the origin
- so does every demuxer open call (=> params param. gets mandatory)
- most stream were changed to provide the "origin" value
- the origin value needed to be passed along in a lot of places
- I was too lazy to split the commit
Fixes: #7274
EDL files can have multiple segments taken from the same source file. In
this case, the source file is supposed to be opened only once. This
stopped working, and it created a new demuxer instance for every single
segment entry. This made it slow and made it use much more memory than
needed.
This was because it tried to iterate over the array of source files, but
the array count (num_parts) was only set to a non-0 value later. Fix
this by maintaining the count correctly.
In addition, the actual code for checking whether a source can be reused
(in open_source()) regressed and stopped working correctly. d->stream
could be NULL. Use demuxer.filename instead; I'm not entirely sure
whether this is always correct, but fortunately we have a distributed
almost-AI driven test suite (called "users") which will probably find
and report such cases.
Probably broke with commit a09396ee60 or something close, but didn't
check closer.
Fixes: #7267
In some corner cases (see #6802), it can be beneficial to use a larger
stream buffer size. Use this as argument to rewrite everything for no
reason.
Turn stream.c itself into a ring buffer, with configurable size. The
latter would have been easily achievable with minimal changes, and the
ring buffer is the hard part. There is no reason to have a ring buffer
at all, except possibly if ffmpeg don't fix their awful mp4 demuxer, and
some subtle issues with demux_mkv.c wanting to seek back by small
offsets (the latter was handled with small stream_peek() calls, which
are unneeded now).
In addition, this turns small forward seeks into reads (where data is
simply skipped). Before this commit, only stream_skip() did this (which
also mean that stream_skip() simply calls stream_seek() now).
Replace all stream_peek() calls with something else (usually
stream_read_peek()). The function was a problem, because it returned a
pointer to the internal buffer, which is now a ring buffer with
wrapping. The new function just copies the data into a buffer, and in
some cases requires callers to dynamically allocate memory. (The most
common case, demux_lavf.c, required a separate buffer allocation anyway
due to FFmpeg "idiosyncrasies".) This is the bulk of the demuxer_*
changes.
I'm not happy with this. There still isn't a good reason why there
should be a ring buffer, that is complex, and most of the time just
wastes half of the available memory. Maybe another rewrite soon.
It also contains bugs; you're an alpha tester now.
In pseudo-DASH mode, we may have no real streams opened until the
demuxer layer is fully loaded and playback actually starts. The only
hint that the stream is from network is, at that point, the init
segment, which is only opened as stream, and then separately as demuxer
(which is dumb but happened to fit the internal architecture better).
So just propagate the flags from the init segment stream. Seems like an
annoyance, but doesn't hurt that much I guess. (Until someone gets the
idea to pass the init segment data inline or so, but nothing does that.)
The sample link in the linked issue will probably soon switch to another
format, because that service always does this after recent uploads or
so.
Fixes: #7038
Someone crazy is trying to mix images with videos in EDL files. Putting
an image as first thing into the EDL disabled audio, because the first
EDL entry was used to define the layout.
Change this. Make it user-configurable, and use a "better" heuristic to
select the default otherwise.
In theory, EDL could be easily extended to specify track layout and
mapping of parts to virtual EDL tracks manually and in great detail. But
I don't think it's worth it - who would bother using it?
Fixes: #6764
If a DASH-hack EDL has an init fragment is set, it opens the init
fragment as such to get the track layout (including codec etc.) and
avoids opening actual fragments until actual playback. It does not get
added to the source array, so it leaks on exit, which triggers an
obscure (but very justified) assertion in thread_tools.c:106. Fix the
leak by adding the additional demuxer instance to the sources arrays,
which gets it freed.
This is a regression from when I rewrote some of the timeline handling.
I decided that in order to make memory management slightly simpler,
freeing a timeline should only free elements in the sources array. That
is OK; I just didn't re-test with pseudo-DASH that has init fragments,
and just hit a video that uses that by accidents. These videos are
rather scarce (apparently) so it happened only now.
The real solution would probably be adding demuxer reference counting.
This EDL memory management is just too messy, and throwing refcounting
at such problems is an effective and popular fix. Then you'd get
debugging nightmares with incorrect refcounts too, though.
Instead of just using "edl/" for the file format, report mkv_oc if it's
generated from ordered chapters, "cue/" if from .cue, "multi/" if it's
from EDL but only for adding separate streams, "dash/" if it's from EDL
but only using the DASH hack, and "edl/" for everything else.
The EDL variants are mostly special-cased to the variants the ytdl
wrapper usually generates.
This has no effect other than what the command.c file-format property
returns.
Remove the singly linked list hack, replace it with a slightly more
proper data structure. This probably gets rid of a few minor bugs along
the way, caused by the awkward nonsensical sharing/duplication of some
fields.
Another change (because I'm touching everything related to timeline
anyway) is that I'm removing the special semantics for parts[num_parts].
This is now strictly out of bounds, and instead of using the start time
of the next/beyond-last part, there is an end time field now.
Unfortunately, this also requires touching the code for cue and mkv
ordered chapters. From some superficial testing, they still seem to
mostly work.
One observable change is that the "no_chapters" header is per-stream
now, which is arguably more correct, and getting the old behavior would
require adding code to handle it as special-case, so just adjust
ytdl_hook.lua to the new behavior.
Used by the next commit. It mostly exposes part of mp4_dash
functionality. It actually makes little sense other than for ytdl
special-use. See next commit.
I think this is better. On the other hand, this is a behavior change.
The EDL "spec" says that unknown fields are igored. But strictly
speaking, unknown headers are not "fields", but unknown entities.
EDL "headers" were always an afterthought, and kind of hacked on top of
the existing code. Improve it slightly, and make it follow the
conventions of the normal parsing. Basically use the same code structure
for them, just that they use different field names.
This commit adds an extension to mpv EDL, which basically allows you to
do the same as --audio-file, --external-file, etc. in a single EDL file.
This is a relatively quick & dirty implementation. The dirty part lies
in the fact that several shortcuts are taken. For example, struct
timeline now forms a singly linked list, which is really weird, but also
means the other timeline using demuxers (cue, mkv) don't need to be
touched. Also, memory management becomes even worse (weird object
ownership rules that are just fragile WTFs). There are some other
dubious small changes, mostly related to the weird representation of
separate streams.
demux_timeline.c contains the actual implementation of the separate
stream handling. For the most part, most things that used to be on the
top level are now in struct virtual_source, of which one for each
separate stream exists. This is basically like running multiple
demux_edl.c in parallel. Some changes could strictly speaking be split
into a separate commit, such as the stream_map type change.
Mostly untested. Seems to work for the intended purpose. Potential for
regressions for other timeline uses (like ordered chapters) is probably
low. One thing which could definitely break and which I didn't test is
the pseudo-DASH fragmented EDL code, of which ytdl can trigger various
forms in obscure situations. (Uh why don't we have a test suite.)
Background:
The intention is to use this for the ytdl wrapper. A certain streaming
site from a particularly brain damaged and plain evil Silicon Valley
company usually provides streams as separate audio and video streams.
The ytdl wrapper simply does use audio-add (i.e. adding it as external
track, like with --audio-file), which works mostly fine. Unfortunately,
mpv manages caching completely separately for external files. This has
the following potential problems:
1. Seek ranges are rendered incorrectly. They always use the "main"
stream, in this case the video stream. E.g. clicking into a cached range
on the OSC could trigger a low level seek if the audio stream is
actually not cached at the target position.
2. The stream cache bloats unnecessarily. Each stream may allocate the
full configured maximum cache size, which is not what the user intends
to do. Cached ranges are not pruned the same way, which creates disjoint
cache ranges, which only use memory and won't help with fast seeking or
playback.
3. mpv will try to aggressively read from both streams. This is done
from different threads, with no regard which stream is more important.
So it might happen that one stream starves the other one, especially if
they have different bitrates.
4. Every stream will use a separate thread, which is an unnecessary
waste of system resources.
In theory, the following solutions are available (this commit works
towards D):
A. Centrally manage reading and caching of all streams. A single thread
would do all I/O, and decide from which stream it should read next. As
long as the total TCP/socket buffering is not too high, this should be
effective to avoid starvation issues. This can also manage the cached
ranges better. It would also get rid of the quite useless additional
demuxer threads. This solution is conceptually simple, but requires
refactoring the entire demuxer middle layer.
B. Attempt to coordinate the demuxer threads. This would maintain a
shared cache and readahead state to solve the mentioned problems
explicitly. While this sounds simple and like an incremental change,
it's probably hard to implement, creates more messy special cases,
solution A. seems just a better and simpler variant of this. (On the
other hand, A. requires refactoring more code.)
C. Render an intersection of the seek ranges across all streams. This
fixes only problem 1.
D. Merge all streams in a dedicated wrapper demuxer. The general demuxer
layer remains unchanged, and reading from separate streams is handled as
special case. This effectively achieves the same as A. In particular,
caching is simply handled by the usual demuxer cache layer, which sees
the wrapper demuxer as a single stream of interleaved packets. One
implementation variant of this is to reuse the EDL infrastructure, which
this commit does.
All in all, solution A would be preferable, because it's cleaner and
works for all external streams in general.
Some previous commit tried to prepare for implementing solution A. This
could still happen. But it could take years until this is finally
seriously started and finished. In any case, this commit doesn't block
or complicate such attempts, which is also why it's the way to go.
It's worth mentioning that original mplayer handles external files by
creating a wrapper demuxer. This is like a less ideal mixture of A. and
D. (The similarity with A. is that extending the mplayer approach to be
fully dynamic and without certain disadvantages caused by the wrapper
would end up with A. anyway. The similarity with D. is that due to the
wrapper, no higher level code needs to be changed.)
Subtitles (and a few other file types, like playlists) are not streamed,
but fully read on opening. This means keeping the file handle or network
socket open is a waste of resources and could cause other weird
behavior. This is why there's a hack to close them after opening.
Change this hack to make the demuxer itself do this, which is less
weird. (Until recently, demuxer->stream ownership was more complex,
which is why it was done this way.)
There is some evil shit due to a huge ownership/lifetime mess of various
objects. Especially EDL (the currently only nested demuxer case)
requires being careful about mp_cancel and passing down stream pointers.
As one defensive programming measure, stop accessing the "stream"
variable in open_given_type(), even where it would still work. This
includes removing a redundant line of code, and removing the peak call,
which should not be needed anymore, as the remaining demuxers do this
mostly correctly.
I always wanted to get rid of this, because it makes the ownership rules
for the stream pointer really awkward. demux_edl.c was the only
remaining user of this. Replace it with a semi-clever idea: the init
segment shit can be used to pass the "file" contents as memory block,
and "memory://" itself provides an empty stream. I have no idea if this
actually works, because I didn't immediately find a test stream (would
have to be some youtube DASH shit).
Similar purpose as f34e1a0dee.
Somehow this is much more natural too, and needs less code.
This breaks runtime updates to duration. This could easily be fixed, but
no important demuxer does this anyway. Only demux_raw and demux_disc
might (the latter for BD/DVD). For the latter it might actually have
some importance when changing titles at runtime (I guess?), but guess
what, I don't care.
We use the metadata provided by youtube-dl to sort-of implement
fragmented DASH streaming.
This is all a bit hacky, but hopefully a makeshift solution until
libavformat has proper mechanisms. (Although in danger of being one
of those temporary hacks that become permanent.)
Instead of enabling it only when a stream-cache is enabled, also try to
enable it independently from that if the demuxer is marked as
is_network.
Also add some code to the EDL code, so EDLs containing network streams
are automatically cached this way.
Extend the OSD info line so that it shows the demuxer cache in this case
(more or less).
I didn't find where or whether options.rst describes how the demuxer
cache is enabled, so no changes there.
Because it's kind of dumb. (But not sure if it was worth the trouble.)
For stream_file.c, we add new explicit fields. The rest are rather
special uses and can be killed by comparing the stream impl. name.
The changes to DVD/BD/CD/TV are entirely untested.
This has all been made unnecessary recently. The change not to copy the
global option struct in particular can be made because now nothing
accesses the global options anymore in the demux and stream layers.
Some code that was accidentally added/changed in commit 5e30e7a0 is also
removed, because it was simply committed accidentally, and was never
used.
This covers source files which were added in mplayer2 and mpv times
only, and where all code is covered by LGPL relicensing agreements.
There are probably more files to which this applies, but I'm being
conservative here.
A file named ao_sdl.c exists in MPlayer too, but the mpv one is a
complete rewrite, and was added some time after the original ao_sdl.c
was removed. The same applies to vo_sdl.c, for which the SDL2 API is
radically different in addition (MPlayer supports SDL 1.2 only).
common.c contains only code written by me. But common.h is a strange
case: although it originally was named mp_common.h and exists in MPlayer
too, by now it contains only definitions written by uau and me. The
exceptions are the CONTROL_ defines - thus not changing the license of
common.h yet.
codec_tags.c contained once large tables generated from MPlayer's
codecs.conf, but all of these tables were removed.
From demux_playlist.c I'm removing a code fragment from someone who was
not asked; this probably could be done later (see commit 15dccc37).
misc.c is a bit complicated to reason about (it was split off mplayer.c
and thus contains random functions out of this file), but actually all
functions have been added post-MPlayer. Except get_relative_time(),
which was written by uau, but looks similar to 3 different versions of
something similar in each of the Unix/win32/OSX timer source files. I'm
not sure what that means in regards to copyright, so I've just moved it
into another still-GPL source file for now.
screenshot.c once had some minor parts of MPlayer's vf_screenshot.c, but
they're all gone.
Instead, force everyone to use the metadata struct and set a "title"
field. This is only a problem for the timeline producers, which set up
chapters manually. (They do this because a timeline is a separate
struct.)
This fixes the behavior of the chapter-metadata property, which never
returned a "title" property for e.g. ordered chapters.
Includes some logic for not starting the demuxer thread for fully read
subtitles. (Well, the cache will still waste _lots_ of resources, and
the cache always has to be created, because we don't know whether it'll
be needed _before_ opening the file.)
See #1597.
Only demux_cue and demux_edl used it. It's a weird field and doesn't
help with anything anymore - by now, it only saves a priv context in the
mentioned demuxers. Reducing the number of confusing things the demuxer
struct has is more important than minimizing the code.
This was forgotten when the parser for mplayer2 EDL files was removed.
Change the header of the mpv EDL format to include a '#', so a naive
parser could skip the header as comment. (Maybe this is questionable;
on the other hand, if it can be simpler, why not.)
Also, strip the header in demux_edl.c before passing on the data, so the
header check doesn't need to be duplicated in tl_mpv_edl.c.
Edit Decision Lists (EDL) allow combining parts from multiple source
files into one virtual file. MPlayer had an EDL format (which sucked),
which mplayer2 tried to improve with its own format (which sucked). As
logic demands, mpv introduces its very own format (which sucks).
The new format should actually be much simpler and easier to use, and
its implementation is simpler and smaller too.
Get rid of the strange and messy reliance on DEMUXER_TYPE_ constants.
Instead of having two open functions for the demuxer callbacks (which
somehow are both optional, but you can also decide to implement both...),
just have one function. This function takes a parameter that tells the
demuxer how strictly it should check for the file headers. This is a
nice simplification and allows more flexibility.
Remove the file extension code. This literally did nothing (anymore).
Change demux_lavf so that we check our other builtin demuxers first
before libavformat tries to guess by file extension.
Seems like a completely unnecessary complication. Instead, always add a
1 byte padding (could be extended if a caller needs it), and clear it.
Also add some documentation. There was some, but it was outdated and
incomplete.
Finish renaming directories and moving files. Adjust all include
statements to make the previous commit compile.
The two commits are separate, because git is bad at tracking renames
and content changes at the same time.
Also take this as an opportunity to remove the separation between
"common" and "mplayer" sources in the Makefile. ("common" used to be
shared between mplayer and mencoder.)
wm4
Philip Sequeira
sfan5
Dmitrij D. Czarkoff
Marcin Kurczewski