Normally, we pass libavformat demuxers a wrapped mpv stream. But in some
cases, such as HLS and RTSP, we let libavformat open the stream itself.
In these cases, set typical network properties like useragent according
to the mpv options.
(We still don't set it for the cases where libavformat opens other
streams on its own, e.g. when opening the companion .sub file for .idx
files - not sure if we maybe should always set these options.)
stream_dvd.c includes a pseudo-protocol that recognizes .IFO files, and
plays them using libdvdread. This was relatively lazy, and could perhaps
easily trigger with files that just had the .ifo extension.
Make the checks stricter, and even probe the file header. Apparently the
first bytes in an .ifo file are always "DVDVIDEO-VTS", so check for
this.
Refuse to load the main "video_ts.ifo". The plan is to use stream_dvdnav
for it.
This also removes at least 1 memory leak.
This mechanism originates from MPlayer's way of dealing with blocking
network, but it's still useful. On opening and closing, mpv waits for
network synchronously, and also some obscure commands and use-cases can
lead to such blocking. In these situations, the stream is asynchronously
forced to stop by "interrupting" it.
The old design interrupting I/O was a bit broken: polling with a
callback, instead of actively interrupting it. Change the direction of
this. There is no callback anymore, and the player calls
mp_cancel_trigger() to force the stream to return.
libavformat (via stream_lavf.c) has the old broken design, and fixing it
would require fixing libavformat, which won't happen so quickly. So we
have to keep that part. But everything above the stream layer is
prepared for a better design, and more sophisticated methods than
mp_cancel_test() could be easily introduced.
There's still one problem: commands are still run in the central
playback loop, which we assume can block on I/O in the worst case.
That's not a problem yet, because we simply mark some commands as being
able to stop playback of the current file ("quit" etc.), so input.c
could abort playback as soon as such a command is queued. But there are
also commands abort playback only conditionally, and the logic for that
is in the playback core and thus "unreachable". For example,
"playlist_next" aborts playback only if there's a next file. We don't
want it to always abort playback.
As a quite ugly hack, abort playback only if at least 2 abort commands
are queued - this pretty much happens only if the core is frozen and
doesn't react to input.
Because that might be a bad idea.
Note that remote playlists still can use any protocol marked with
is_safe and is_network, because the case of http-hosted playlists
containing URLs using other streaming protocols is not unusual.
Until now, you had to use --load-unsafe-playlists or --playlist to get
playlists loaded. Change this and always load playlists by default.
This still attempts to reject unsafe URLs. For example, trying to invoke
libavdevice pseudo-demuxer is explicitly prevented. Local paths and any
http links (and some more) are always allowed.
bstr.c doesn't really deserve its own directory, and compat had just
a few files, most of which may as well be in osdep. There isn't really
any justification for these extra directories, so get rid of them.
The compat/libav.h was empty - just delete it. We changed our approach
to API compatibility, and will likely not need it anymore.
This didn't work, because the timebase was wrong. According to the
ffmpeg doxygen, if the stream index is -1 (which is what we used), the
timebase is AV_TIME_BASE. But this didn't work, and it really expected
the stream's timebase. Quite "surprising", since this feature
(avio_seek_time) is used by rtmp only.
Fixing this properly is too hard, so hack-fix our way around it.
STREAM_CTRL_SEEK_TO_TIME is also used by DVD/BD, so a new
STREAM_CTRL_AVSEEK is added. We simply pass-through the request
verbatim.
DVD and Bluray (and to some extent cdda) require awful hacks all over
the codebase to make them work. The main reason is that they act like
container, but are entirely implemented on the stream layer. The raw
mpeg data resulting from these streams must be "extended" with the
container-like metadata transported via STREAM_CTRLs. The result were
hacks all over demux.c and some higher-level parts.
Add a "disc" pseudo-demuxer, and move all these hacks and special-cases
to it.
For remarks, pretty much see the manpage additions. Could help with
network streams that require too much seeking (maybe), or might be
extended to help with the use case of watching and downloading a file
at the same time.
In general, it might be a useless feature and could be removed again.
While I'm not very fond of "const", it's important for declarations
(it decides whether a symbol is emitted in a read-only or read/write
section). Fix all these cases, so we have writeable global data only
when we really need.
Usually, each stream driver declares the size and option list of its
private data. This was pretty natural for when most streams still used
global variables to setup their defaults. They did by pointing
priv_defaults to the (mutable) struct containing the option values. But
falls short when storing the option values in MPOpts. So provide a
somewhat inelegant but simple way to let the stream implementation setup
the priv struct at initialization time.
This is done with the get_defaults callback. It should return a copy of
the struct used in MPOpts. (A copy, because if MPOpts is changed, string
fields might be deallocated, and if that field is not described by
stream_info.options, it won't be copied on init.)
Convert all these commands to properties. (Except tv_last_channel, not
sure what to do with this.) Also, internally, don't access stream
details directly, but dispatch commands with stream ctrls.
Many of the new properties are a bit strange, because they're write-
only. Also remove some OSD output these commands produced, because I
couldn't be bothered to port these.
In general, this makes everything much cleaner, and will also make it
easier to e.g. move the demuxer to its own thread.
Don't bother updating input.conf, but changes.rst documents how old
commands map to the new ones.
Mostly untested, due to lack of hardware.
For some reason, we support writeable streams. (Only encoding uses that,
and the use of it looks messy enough that I want to replace it with FILE
or avio today.)
It's a chaos: most streams do not actually check the mode parameter like
they should. Simplify it, and let streams signal availability of write
mode by setting a flag in the stream info struct.
Stop using it in most places, and prefer STREAM_CTRL_GET_SIZE. The
advantage is that always the correct size will be used. There can be no
doubt anymore whether the end_pos value is outdated (as it happens often
with files that are being downloaded).
Some streams still use end_pos. They don't change size, and it's easier
to emulate STREAM_CTRL_GET_SIZE using end_pos, instead of adding a
STREAM_CTRL_GET_SIZE implementation to these streams.
Make sure int64_t is always used for STREAM_CTRL_GET_SIZE (it was
uint64_t before).
Remove the seek flags mess, and replace them with a seekable flag. Every
stream must set it consistently now, and an assertion in stream.c checks
this. Don't distinguish between streams that can only be forward or
backwards seeked, since we have no such stream types.
stream.start_pos was needed for optical media only, and (apparently) not
for very good reasons. Just get rid of it.
For stream_dvd, we don't need to do anything. Byte seeking was already
removed from it earlier.
For stream_cdda and stream_vcd, emulate the start_pos by offsetting the
stream pos as seen by the rest of mpv.
The bits in discnav.c and loadfile.c were for dealing with the code
seeking back to the start in demux.c. Handle this differently by
assuming the demuxer is always initialized with the stream at start
position, and instead seek back if initializing the demuxer fails.
Remove the --sb option, which worked by modifying stream.start_pos. If
someone really wants this option, it could be added back by creating a
"slice" stream (actually ffmpeg already has such a thing).
Some options change from percentages to number of kilobytes; there are
no cache options using percentages anymore.
Raise the default values. The cache is now 25000 kilobytes, although if
your connection is slow enough, the maximum is probably never reached.
(Although all the memory will still be used as seekback-cache.)
Remove the separate --audio-file-cache option, and use the cache default
settings for it.
This used global variables for the asynchronous interrupt callback.
Pick the simple and dumb solution and stuff the callback into
mpv_global. Do this because interrupt checking should also work in the
connect phase, and currently stream creation equates connecting.
Ideally, this would be passed to the stream on creation instead, or
connecting would be separated from creation. But since I don't know yet
which is better, and since moving stream/demuxer into their own thread
is something that will happen later, go with the mpv_global solution.
The only tricky part is keeping the cache contents, which is made simple
by allocating the new cache while still keeping the old cache around,
and then copying the old data.
To explain the "Don't use this when playing DVD or Bluray." comment: the
cache also associates timestamps to blocks of bytes, but throws away the
timestamps on seek. Thus you will experience strange behavior after
resizing the cache until the old cached region is exhausted.
Stream-level chapters (like DVD etc.) did potentially not have
timestamps for each chapter, so STREAM_CTRL_SEEK_TO_CHAPTER and
STREAM_CTRL_GET_CURRENT_CHAPTER were needed to navigate chapters. We've
switched everything to use timestamps and that seems to work, so we can
simplify the code and remove this old mechanism.
Starting a network stream could stall by executing uncacheable stream
control requests (STREAM_CTRL_GET_LANG and STREAM_CTRL_GET_DVD_INFO).
Being uncacheable means the player has to wait until the cache is done
reading the current block of data. These requests can't be cached
because they're too complicated, so the only way to avoid them is
special casing the DVD and Bluray streams (which are the only things
which need these requests), and not doing them in other cases.
(This is kind of inelegant, but so is the rest of the DVD/BD code.)
This fixes two things:
1. Dropping files on the VO window will auto-load subtitles (since most
drag & drop code prefixes the filenames with 'file://', and the
subtitle auto-load code considers 'file://' non-local)
2. Fix behavior of the %x screenshot filename template (similar problem)
One could force all that code to special-case 'file://' URLs, but just
replacing the filename on playback start is simpler.
In my opinion, config.h inclusions should be kept to a minimum. MPlayer
code really liked including config.h everywhere, though, even in often
used header files. Try to reduce this.
On dvdnav, caching kind of works but not really. (Not our fault, at
least not fully. It's due to libdvdnav being slightly misdesigned; see
previous commit for some explanations.)
The TV code is implemented in the demuxer, and the stream implementation
is just a wrapper, so caching makes no sense here.
This readds a more or less completely new dvdnav implementation, though
it's based on the code from before commit 41fbcee. Note that this is
rather basic, and might be broken or not quite usable in many cases.
Most importantly, navigation highlights are not correctly implemented.
This would require changes in the FFmpeg dvdsub decoder (to apply a
different internal CLUT), so supporting it is not really possible right
now. And in fact, I don't think I ever want to support it, because it's
a very small gain for a lot of work. Instead, mpv will display fake
highlights, which are an approximate bounding box around the real
highlights.
Some things like mouse input or switching audio/subtitles stream using
the dvdnav VM are not supported.
Might be quite fragile on transitions: if dvdnav initiates a transition,
and doesn't give us enough mpeg data to initialize video playback, the
player will just quit.
This is added only because some users seem to want it. I don't intend to
make mpv a good DVD player, so the very basic minimum will have to do.
How about you just convert your DVD to proper video files?
Uncompressed rar archives can be transparently opened, but the filename
the player doesn't have the direct filename (but something starting
with rar://... instead). This will lead to external subtitles not
being loaded.
This doesn't handle multi-volume rar files, but in that cases just use
the --autosub-match=fuzzy option.
Fixes#397 on github.
The problem with DVD/BD and playback resume is that most often, the
filename is just "dvd://", while the actual path to the DVD disk image
is given with --dvd-device. But playback resume works on the filename
only.
Add a pretty bad hack that includes the path to the disk image if the
filename starts with dvd://, and the same for BD respectively. (It's a
bad hack, but I want to go to bed, so here we go. I might revert or
improve it later, depending on user feedback.)
We have to cleanup the global variable mess around the dvd_device.
Ideally, this should go into MPOpts, but it isn't yet. Make the code
paths in mplayer.c take MPOpts anyway.
Apparently, it is popular to store large files in uncompressed rar
archives. Extracting files is not practical, and some media players
suport playing directly from uncompressed rar (at least VLC and some
DirectShow components).
Storing or accessing files this way is completely idiotic, but it is
a common practice, and the ones subjected to this practice can't do
much to change this (at least that's what I assume/hope). Also, it's
a feature request, so we say yes.
This code is mostly taken from VLC (commit f6e7240 from their git tree).
We also copy the way this is done: opening a rar file by itself yields
a playlist, which contains URLs to the actual entries in the rar file.
Compressed entries are simply skipped.
Add a stream filter concept, in which streams can be opened on top of
an underlying "source" stream. Change the open code to make this
easier, and also to account for some mechanisms that will be needed
for this.
The following commit will add stream_rar, which contains such a stream
filter.
The way the url_options field was handled was not entirely sane: it's
actually a flexible array member, so it points to garbage for streams
which do not initialize this member (it just points to the data right
after the struct, which is garbage in theory and practice). This was
not actually a problem, since the field is only used if priv_size is
set (due to how this stuff is used). But it doesn't allow setting
priv_size only, which might be useful in some cases.
Also, make the protocols array not a fixed size array. Most stream
implementations have only 1 protocol prefix, but stream_lavf.c has
over 10 (whitelists ffmpeg protocols). The high size of the fixed
size protocol array wastes space, and it is _still_ annoying to
add new prefixes to stream_lavf (have to bump the maximum length),
so make it arbitrary length.
The two changes (plus some more cosmetic changes) arte conflated into
one, because it was annoying going over all the stream implementations.
Modeled after the old playlist_parser.c, but actually new code, and it
works a bit differently.
Demuxers (and sometimes streams) are the component that should be used
to open files and to determine the file format. This was already done
for subtitles, but playlists still use a separate code path.
stream_file.c contains some code meant for forward seeking with pipes.
This simply reads data until the seek position is reached. Move this
code to stream.c. This stops stream_file from doing strange things
(messing with stream internals), and removes the code duplication too.
We also make stream_seek_long() use the new skip code. This is shorter
and much easier to follow than the old code, which basically did strange
things.
