The only effective difference is that the former explicitly checks
whether the JSON value type is string, and errors out if not. The rest
is exactly the same (mpv_set_property_string is mpv_set_property with
MPV_FORMAT_STRING).
It seems silly to keep this, so just remove it.
With the advent of actual HDR devices, my real measured ICC profile has
an "infinite" contrast, since the display is completely off on pure
black inputs. 100k:1 might not be enough, so let's just bump it up to
1m:1 to be safe.
Also, improve the logging in the case that the detected contrast is too
high by default.
With the internal change from stringlist to keyvaluelist, these
sub-options stop working. I don't really care enough to bring them
back. (Order doesn't matter, -del always seemed annoying.)
We are currently using primary / overlay planes drm objects, assuming that primary plane is osd and overlay plane is video.
This commit is doing two things :
- replace the primary / overlay planes members with osd and video planes member without the assumption
- Add two more options to determine which one of the primary / overlay is associated to osd / video.
- It will default osd to overlay and video to primary if unspecified
That new API was introduced and allows to have several native resources.
Thisuses that mechanisma for drm resources rather than the deprecated
opengl-cb structs.
This patch therefore add two structs that can be used with the drm atomic interop.
- mpv_opengl_drm_params : which will hold all the drm handles
- mpv_opengl_drm_osd_size : which will hold osd layer size
This commit adds a drm-osd-size=WxH parameter to commandline which
allows to define the OSD plane dimension. OSD can be upscaled to
screen resolution when having OSD at video resolution is too heavy.
This is especially useful for UHD modes on embedded devices where
the GPU cannot handle UHD modes at a decent framerate.
Instead of using an internal counter to keep track of the value that was
set last, attempt to find the current value of the property/option in
the value list, and then set the next value in the list.
There are some potential problems. If a property refuses to accept a
specific value, the cycle-values command will fail, and start from the
same position again. It can't know that it's supposed to skip the next
value. The same can happen to properties which behave "strangely", such
as the "aspect" property, which will return the current aspect if you
write "-1" to it. As a consequence, cycle-values can appear to get
"stuck".
I still think the new behavior is what users expect more, and which is
generally more useful. We won't restore the ability to get the old
behavior, unless we decide to revert this commit entirely.
Fixes#5772, and hopefully other complaints.
The main change is that we wait with opening the muxer ("writing
headers") until we have data from all streams. This fixes race
conditions at init due to broken assumptions in the old code.
This also changes a lot of other stuff. I found and fixed a few API
violations (often things for which better mechanisms were invented, and
the old ones are not valid anymore). I try to get away from the public
mutex and shared fields in encode_lavc_context. For now it's still
needed for some timestamp-related fields, but most are gone. It also
removes some bad code duplication between audio and video paths.
Fundamentally, scripts are loaded asynchronously, but as a feature,
there was code to wait until a script is loaded (for a certain arbitrary
definition of "loaded"). This was done in scripting.c with the
wait_loaded() function.
This called mp_idle(), and since there are commands to load/unload
scripts, it meant the player core loop could be entered recursively. I
think this is a major complication and has some problems. For example,
if you had a script that does 'os.execute("sleep inf")', then every time
you ran a command to load an instance of the script would add a new
stack frame of mp_idle(). This would lead to some sort of reentrancy
horror that is hard to debug. Also misc/dispatch.c contains a somewhat
tricky mess to support such recursive invocations. There were also some
bugs due to this and due to unforeseen interactions with other messes.
This scripting stuff was the only thing making use of that reentrancy,
and future commands that have "logical" waiting for something should be
implemented differently. So get rid of it.
Change the code to wait only in the player initialization phase: the
only place where it really has to wait is before playback is started,
because scripts might want to set options or hooks that interact with
playback initialization. Unloading of builtin scripts (can happen with
e.g. "set osc no") is left asynchronous; the unloading wasn't too robust
anyway, and this change won't make a difference if someone is trying to
break it intentionally. Note that this is not in mp_initialize(),
because mpv_initialize() uses this by locking the core, which would have
the same problem.
In the future, commands which logically wait should use different
mechanisms. Originally I thought the current approach (that is removed
with this commit) should be used, but it's too much of a mess and can't
even be used in some cases. Examples are:
- "loadfile" should be made blocking (needs to run the normal player
code and manually unblock the thread issuing the command)
- "add-sub" should not freeze the player until the URL is opened (needs
to run opening on a separate thread)
Possibly the current scripting behavior could be restored once new
mechanisms exist, and if it turns out that anyone needs it.
With this commit there should be no further instances of recursive
playloop invocations (other than the case in the following commit),
since all mp_idle()/mp_wait_events() calls are done strictly from the
main thread (and not commands/properties or libmpv client API that
"lock" the main thread).
Until recently, the AO was reinitialized strictly only on decoder format
changes. But the commit for simplifying audio format negotiation removed
this. Now the AO is recreated for any format change.
This is sort of annoying if you change playback speed. The
insertion/removal of af_scaletempo can change the sample format. For
example, the acompressor filter will convert output to double, so
toggling scaletempo will force the format back to float. This recreates
the AO under the --gapless-audio=weak default. This likely affects a lot
of other filters too.
Work this around by allowing sample format changes, and keeping the
current AO format in these cases. This is probably not a big problem.
Most audio APIs force the output format to float anyway.
This means you actually have to worry about what the default gapless
mode does to your audio. If you start with a file that uses 8 bit per
sample, and then continue playing a 24 bit FLAC, it will be converted
down to 8 bit per sample. (Assuming they are played in a way that uses
the gapless logic.)
One can now set the number of buffers and the buffer size.
This can reduce the CPU usage and the total latency stays mostly the same.
As there are sync mechanisms the A/V sync continue intact and working.
It also modifies 6.1 channel order, as per OpenAL spec
and add AOPLAY_FINAL_CHUNK support
Uses OpenAL Soft's AL_DIRECT_CHANNELS_SOFT extension and can be controlled through
a new CLI option, --openal-direct-channels.
This allows one to send the audio data direrctly to the desired channel without
effects applied.
Due to earlier misinterpretation of the Lua docs as if mp.register_idle
registers a one-shot callback, the JS docs suggested to use setTimeout.
But the behavior and Lua docs are such that it's a repeating callback
which fires just before the script thread goes to sleep.
Implement it for JS too.
As it turns out, there are multiple libmpv users who saw a need to
use the hook API. The API is kind of shitty and was never meant to be
actually public (it was mostly a hack for the ytdl script).
Introduce a proper API and deprecate the old one. The old one will
probably continue to work for a few releases, but will be removed
eventually.
There are some slight changes to the old API, but if a user followed
the manual properly, it won't break.
Mostly untested. Appears to work with ytdl_hook.
This adds key bindings for some semi-popular features. It also tries to
cleanup some old bindings. For example w/e for panscan is now changed to
w/W. In all cases, the old bindings are still kept and work, though.
Part of an ongoing attempt to cleanup the default key bindings.
See #973 for some context.
The playback start logic explicitly waits until the first frame has been
displayed. Usually this will introduce a wait of 1 vsync. For normal
playback this doesn't matter, but with respect to low latency needs,
this only leads to additional data getting queued up in the demuxer or
network buffers.
Another thing is that the timing logic decodes 1 frame ahead (= 1 frame
extra latency) to determine the exact duration of a frame.
To be fair, there doesn't really seem to be a hard reason why this is
needed. With the current code, enabling the option does lead to A/V
desync sometimes (if the demuxer FPS is too inaccurate), and also frame
drops at playback start in some situations. But this all seems to be
avoidable, if the timing logic were to be rewritten completely, which
should probably happen in the future. Thus the new option comes with the
warning that it can be removed any time. This is also why the option has
"hack" in the name.
Well I guess it doesn't help that much.
Also add some stuff that might help to the manpage.
The fundamental problem with some "live" sources (e.g. x11grab) is
actually that the player gets behind initially, and never thinks it has
to catch up. This is also why --untimed can help.
The purpose of the new API is to make it useable with other APIs than
OpenGL, especially D3D11 and vulkan. In theory it's now possible to
support other vo_gpu backends, as well as backends that don't use the
vo_gpu code at all.
This also aims to get rid of the dumb mpv_get_sub_api() function. The
life cycle of the new mpv_render_context is a bit different from
mpv_opengl_cb_context, and you explicitly create/destroy the new
context, instead of calling init/uninit on an object returned by
mpv_get_sub_api().
In other to make the render API generic, it's annoyingly EGL style, and
requires you to pass in API-specific objects to generic functions. This
is to avoid explicit objects like the internal ra API has, because that
sounds more complicated and annoying for an API that's supposed to never
change.
The opengl_cb API will continue to exist for a bit longer, but
internally there are already a few tradeoffs, like reduced
thread-safety.
Mostly untested. Seems to work fine with mpc-qt.
the title bar is now within the window bounds instead of outside. same
as QuickTime Player. it supports several standard styles, two dark and
two light ones. additionally we have properly rounded corners now and
the borderless window also has the proper window shadow.
Also make the earliest supported macOS version 10.10.
Fixes#4789, #3944
This introduces the option --drm-format (currently used only by
context_drm_egl, vo_drm implementation is pending) which allows you to
pick between a xrgb8888 or a xrgb2101010 visual for --gpu-context=drm.
Requires a recent mesa (18.0.0_rc4 or later) to work.
This also fixes a bug when using --gpu-context=drm on a 30bpp-enabled
mesa (allow_rgb10_configs set to true). Previously it would've set up
an XRGB8888 format at the DRM/GBM level, while a 30bpp EGLConfig would
be picked, resulting in a garbled image.
Do this because retrying reading on higher levels (like the demuxer)
usually causes tons of problems. A hack like this is simpler and could
allow to remove some of the higher level retry behavior.
This works by trying to detect whether the file is appended. If we reach
EOF, check if the file size changed compared to the initial value. If it
did, it means the file was appended at least once, and we set the
p->appending flag. If that flag is set, we simply retry reading more
data every time we encounter EOF. The only way to do this is polling,
and we poll for at most 10 times, after waiting for 200ms every time.
This solves a number of problems simultaneously:
1. When outputting HLG, this allows tuning the OOTF based on the display
characteristics.
2. When outputting PQ or other HDR curves, this allows soft-limiting the
output brightness using the tone mapping algorithm.
3. When outputting SDR, this allows HDR-in-SDR style output, by
controlling the output brightness directly.
Closes#5521
Usable for uniquely identifying mpv instances from
subprocesses, controlling mpv with AppleScript, ...
Adds a new mp_getpid() wrapper for cross-platform reasons.
This switches the default away from "bob" to the best algorithm reported
as supported by the driver. This is convenient for users, and there is
no reason to use something worse by default.
Untested.
