Remove the old EDL implementation that was activated with the --edl
option. It is mostly redundant and inferior compared to the newer
demux_edl support, though currently there's no support for using the
same EDL files with the new implementation and the mute functionality
of the old implementation is not supported. The main reason to remove
the old implementation at this point is that the mute functionality
would conflict with following audio volume handling changes, and
working on the old code would be a wasted effort in the long run as at
some point it would be removed anyway.
The --edlout functionality is kept for now, even though after this
commit there is no code that could directly read its output.
Windows uses a legacy codepage for char* / runtime functions accepting
char *. Using UTF-8 as the codepage with setlocale() is explicitly
forbidden.
Work this around by overriding the MSVCRT functions with wrapper
macros, that assume UTF-8 and use "proper" API calls like _wopen etc.
to deal with unicode filenames. All code that uses standard functions
that take or return filenames must now include osdep/io.h. stat()
can't be overridden, because MinGW-w64 itself defines "stat" as a
macro. Change code to use use mp_stat() instead.
This is not perfectly clean, but still somewhat sane, and much better
than littering the rest of the mplayer code with MinGW specific hacks.
It's also a bit fragile, but that's actually little different from the
previous situation. Also, MinGW is unlikely to ever include a nice way
of dealing with this.
libpostproc has been removed from Libav and the library now exists as
a separate project. Because it's not essential, separate it from the
Libav library check and allow compiling without it.
Require versions of the Libav libraries corresponding to Libav release
0.7. These are:
libavutil 51.7.0
libavcodec 53.5.0
libavformat 53.2.0
libswscale 2.0.0
libpostproc 52.0.0
Also disable the fallback to simple header check if these libraries
could not be found with pkg-config; now compiling without pkg-config
support for these always requires explicitly setting --enable-libav
and any needed compiler/linker flags. The simple check would have let
compilation proceed even if a version mismatch was detected.
Add native Cocoa code to display an OpenGL window. Some of the code is
based on the OpenGL parts of vo_corevideo but I took the time to remove
old code based on Carbon.
There is autodetection in the configure script but you can use
--enable[disable]-cocoa to enable[disable] this.
Add a VO command (VOCTRL_SCREENSHOT) which requests a screenshot
directly from the VO. If VO support is available, screenshots will be
taken instantly (no more 1 or 2 frames delay). Taking screenshots when
hardware decoding is in use will also work (vdpau). Additionally, the
screenshots will now use the same colorspace as the video display.
Change the central MPContext to be allocated with talloc so that it
can be used as a talloc parent context.
This commit does not yet implement the functionality for any VO (added
in subsequent commits).
The old screenshot video filter is not needed anymore if VO support is
present, and in that case will not be used even if it is present in
the filter chain. If VO support is not available then the filter is
used like before. Note that the filter still has some of the old
problems, such as delaying the screenshot by at least 1 frame.
Something like the OSD menu functionality could be useful. However the
current implementation has several problems and would require a
relatively large amount of work to get into good shape. As far as I
know there are few users of the existing functionality. Nobody is
working on the existing code and keeping it compiling at all while
changing other code would require extra work. So delete the menu code
and some related code elsewhere that's used by nothing else.
Delete the vo_gl2 and vo_matrixview implementations.
vo_gl2 was barely useful anymore. It was a hack based on an old
vo_gl.c version, and all it did differently was rendering the video in
tiles instead of using a single texture. That made it work with some
crappy OpenGL implementations. These days all GPUs support textures of
at least 2048x2048 pixels, which is enough for HD playback. On the
other hand, gl2 suffered from various bugs and deficiencies, all of
which are fixed in gl. Its existence also confused users; many thought
that gl2 is the next version of gl and attempted to use it, even
though it's much worse than gl and they should have used that instead.
Should it turn out that tiling is actually useful, it should be
implemented in vo_gl, instead of keeping vo_gl2 alive.
vo_matrixview was a toy that couldn't even properly display a video.
All it did was display a screensaver-like animation that showed "a
Matrix-like running-text effect". (mplayer is not a screensaver.)
After commit 75eab4f72a ("video, options: implement better YUV->RGB
conversion control"), libvo/csputils.c symbols are required by core
code. However, the file was still only compiled if GL was enabled,
causing a build failure with GL disabled. Fix by making csputils.c
compilation unconditional.
Libavutil eval API seems to be enough for vf_qp, so enable the filter
if the API is available. Also clean up some left over lines for other
filters in Makefile.
Clean up aspect.c code and simplify it somewhat (without changing the
overall logic). Replace debug output printf calls under #ifdef with
mp_msg() debug output (somewhat modified).
Remove the file aspecttest.c which created a binary to test aspect.c
functionality. It did not compile and would not be particularly useful
anyway. Remove some support lines from aspect.c and Makefile.
Due to libavcodec changes vo_xvmc would have needed some modifications
to keep working. However, I think there's little real demand for XvMC,
so I'll just drop XvMC support. XvMC only supported MPEG-2, making it
of very limited usefulness nowadays, plus the vo_xvmc implementation
was not high quality and never worked particularly well or reliably
anyway.
Move sub_filenames() and related code from subreader.c to new file
find_subfiles.c. This function is used to find subtitle files that
should be loaded for the current video; this functionality is not
specific to the particular kind of text subtitle handling implemented
in subreader.c.
Also reindent and prettify the moved code a bit.
* edl:
core: support timeline with audio-only files
core: wake up a bit less often for audio-only files
core: audio: cut audio writes at end of timeline part
EDL: add support for new EDL file format
stream.[ch], ass_mp: new stream function for whole-file reads
tl_matroska.c: move the find_files() function here
bstr.[ch], path.[ch]: add string and path handling functions
core: ordered chapters: move timeline creation to timeline/
options: drop support for numeric -demuxer values
cleanup: demuxer.[ch]: remove unused code, make functions static
cleanup: reindent demuxer.h, use struct names for types
The timeline code previously added to support Matroska ordered
chapters allows constructing a playback timeline from segments picked
from multiple source files. Add support for a new EDL format to make
this machinery available for use with file formats other than Matroska
and in a manner easier to use than creating files with ordered
chapters.
Unlike the old -edl option which specifies an additional file with
edits to apply to the video file given as the main argument, the new
EDL format is used by giving only the EDL file as the file to play;
that file then contains the filename(s) to use as source files where
actual video segments come from. Filename paths in the EDL file are
ignored. Currently the source files are only searched for in the
directory of the EDL file; support for a search path option will
likely be added in the future.
Format of the EDL files
The first line in the file must be "mplayer EDL file, version 2".
The rest of the lines belong to one of these classes:
1) lines specifying source files
2) empty lines
3) lines specifying timeline segments.
Lines beginning with '<' specify source files. These lines first
contain an identifier used to refer to the source file later, then the
filename separated by whitespace. The identifier must start with a
letter. Filenames that start or end with whitespace or contain
newlines are not supported.
On other lines '#' characters delimit comments. Lines that contain
only whitespace after comments have been removed are ignored.
Timeline segments must appear in the file in chronological order. Each
segment has the following information associated with it:
- duration
- output start time
- output end time (= output start time + duration)
- source id (specifies the file the content of the segment comes from)
- source start time (timestamp in the source file)
- source end time (= source start time + duration)
The output timestamps must form a continuous timeline from 0 to the
end of the last segment, such that each new segment starts from the
time the previous one ends at. Source files and times may change
arbitrarily between segments.
The general format for lines specifying timeline segments is
[output time info] source_id [source time info]
source_id must be an identifier defined on a '<' line. Both the time
info parts consists of zero or more of the following elements:
1) timestamp
2) -timestamp
3) +duration
4) *
5) -*
, where "timestamp" and "duration" are decimal numbers (computations
are done with nanosecond precision). Whitespace around "+" and "-" is
optional. 1) and 2) specify start and end time of the segment on
output or source side. 3) specifies duration; the semantics are the
same whether this appears on output or source side. 4) and 5) are
ignored on the output side (they're always implicitly assumed). On the
source side 4) specifies that the segment starts where the previous
segment _using this source_ ended; if there was no previous segment
time 0 is used. 5) specifies that the segment ends where the next
segment using this source starts.
Redundant information may be omitted. It will be filled in using the
following rules:
- output start for first segment is 0
- two of [output start, output end, duration] imply third
- two of [source start, source end, duration] imply third
- output start = output end of previous segment
- output end = output start of next segment
- if "*", source start = source end of earlier segment
- if "-*", source end = source start of a later segment
As a special rule, a last zero-duration segment without a source
specification may appear. This will produce no corresponding segment
in the resulting timeline, but can be used as syntax to specify the
end time of the timeline (with effect equal to adding -time on the
previous line).
Examples:
----- begin -----
mplayer EDL file, version 2
< id1 filename
0 id1 123
100 id1 456
200 id1 789
300
----- end -----
All segments come from the source file "filename". First segment
(output time 0-100) comes from time 123-223, second 456-556, third
789-889.
----- begin -----
mplayer EDL file, version 2
< f filename
f 60-120
f 600-660
f 30- 90
----- end -----
Play first seconds 60-120 from the file, then 600-660, then 30-90.
----- begin -----
mplayer EDL file, version 2
< id1 filename1
< id2 filename2
+10 id1 *
+10 id2 *
+10 id1 *
+10 id2 *
+10 id1 *
+10 id2 *
----- end -----
This plays time 0-10 from filename1, then 0-10 from filename1, then
10-20 from filename1, then 10-20 from filename2, then 20-30 from
filename1, then 20-30 from filename2.
----- begin -----
mplayer EDL file, version 2
< t1 filename1
< t2 filename2
t1 * +2 # segment 1
+2 t2 100 # segment 2
t1 * # segment 3
t2 *-* # segment 4
t1 3 -* # segment 5
+0.111111 t2 102.5 # segment 6
7.37 t1 5 +1 # segment 7
----- end -----
This rather pathological example illustrates the rules for filling in
implied data. All the values can be determined by recursively applying
the rules given above, and the full end result is this:
+2 0-2 t1 0-2 # segment 1
+2 2-4 t2 100-102 # segment 2
+0.758889 4-4.758889 t1 2-2.758889 # segment 3
+0.5 4.4758889-5.258889 t2 102-102.5 # segment 4
+2 5.258889-7.258889 t1 3-5 # segment 5
+0.111111 7.258889-7.37 t2 102.5-102.611111 # segment 6
+1 7.37-8.37 t1 5-6 # segment 7
Delete mp3lib which has been the default mp3 decoder until now. In
addition to being an unnecessary embedded library it now fails to
compile correctly with the new gcc-4.6, producing noise.
After the deletion the default decoder priority for mp3 will be first
libmpg123 (a newer version of the code that mp3lib was based on) if
available, then ffmp3float which should be available in all normal
compiles. I think that some tweaking may be required as these decoder
alternatives get wider testing, but any problems should be solvable
and there should be no need for mp3lib.
Disable compilation of demux_ty_osd.c because of its GPL v2-only
license. This only affects TiVo files with -subcc. After this no
v2-only code should get compiled (yuv4mpeg_intern.h has a v2-only
license, but the contents of the header look like they're not
copyrightable).
Add new file timeline/tl_matroska.c. Move the code that parses
ordered chapter information from Matroska files and creates the
timeline structure based on that to the new file.
Initialize the format parameter given to open_stream() in the moved
code. The previous uninitialized value shouldn't have caused any
visible effects.
Force Makefile to always run version.sh to potentially regenerate
version.h. Drop compiler version and 'git-' prefix from version
number. Match only git tags starting 'v'+number when generating
version number; leave the 'v' out from the result.
Drop internal copy of the tremor library. Note that the internal ogg
demuxer (which is still sometimes useful to work around libavformat
ogg demuxer problems, though it's itself quite buggy) now cannot be
compiled without either external libvorbis or libvorbisidec (tremor).
There were multiple files specific to Zoran support, and they also
depended on internal FFmpeg headers (so it would probably have been
hard to get them to compile now even if you tried). It's obsolete now,
so just drop the whole mess.
dxr2 support had been broken quite a while and nobody noticed. There
were finally commits to fix it in the svn repo, but rather than apply
those I'll just drop dxr2 support.
By now VIDIX is too obscure to justify the amount of code and
complexity it requires in the sources. Although there is no pressing
need to drop it just now from a code point of view, I'll rather remove
it before release than release with VIDIX support and then drop it
later.
Some of the manpage mentions of VIDIX were in "this option supported
for these VOs" lists that looked outdated and failed to mention vdpau
for example. Replace such incorrect lists with a generic "not
supported for all VOs" mention.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@32741 b3059339-0415-0410-9bf9-f77b7e298cf2
Remove AAC/FAAD2 installation instructions.
There is nothing special about building and installing FAAD2, so there is
no longer a need to keep maintaining instructions for it.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@32742 b3059339-0415-0410-9bf9-f77b7e298cf2
* sub:
sub/OSD: move some related files to sub/
subtitles: options: enable -ass by default
subtitles: change default libass rendering style
demux_mkv, chapters: change millisecond arithmetic to ns
cleanup: rename ass_* functions to mp_ass_*
subs: use correct font aspect ratio for libass + converted subs
cleanup: some random minor code simplification and cleanup
vf_vo: fix EOSD change detection bug
sd_ass: remove subreader use, support plaintext markup
subtitles: style support for common SubRip tags and MicroDVD
core: ordered chapters: fix bad subtitle parameter
subs/demux: don't try to enable sub track when creating it
subtitles/demux: store duration instead of endpts in demux packets
subtitles: add framework for subtitle decoders
options: add special -leak-report option
subtitles: remove code trying to handle text subs with libavcodec
cleanup: move MP_NOPTS_VALUE definition to mpcommon.h
subtitles: move global ass_track to struct osd_state
core: move most mpcommon.c contents to mplayer.c
core: move global "subdata" and "vo_sub_last" to mpctx
subtitles: remove sub_last_pts hack
options: move -noconfig to option struct, simplify
SubRip subtitles have no "official" spec for any styling support, but
various tags are in common use; previous code filtered out text
between <> to remove HTML-style tags. Add support for those tags and
for MicroDVD subtitle styling. The style display is implemented by
converting the subtitles to the ASS subtitle format and displaying
them with libass, so libass needs to be enabled.
Original patch by Clément Bœsch <ubitux@gmail.com>.
Add a framework for subtitle decoder modules that work more like
audio/video decoders do, and change libass rendering of demuxed
subtitles to use the new framework.
The old subtitle code is messy, with details specific to handling
particular subtitle types spread over high-level code. This should
make it easier to clean things up and fix some bugs/limitations.
Make "-lavdopts threads=0" mean an autodetected number of threads, and
make that the default value of the option. Also increase the upper
limit of the option from 8 to 16. Add new file osdep/numcores.c which
tries to determine the number of cores available on the machine.
numcores.c is based (heavily modified) on public domain numcpus.c by
Philip Willoughby <pgw99@doc.ic.ac.uk>, downloaded from
http://csgsoft.doc.ic.ac.uk/numcpus/
msgfmt creates the output file even if there was a fatal error. Thus
make would stop because of the error return, but the output file would
be left on disk and running make again would continue building other
files. Enable the .DELETE_ON_ERROR special target to automatically
delete target files changed by failing commands. This affects all
rules; I think it is the correct behavior for all existing rules.
Further review very welcome, but it is time (and good enough) to add this.
Patch by Gordon Schmidt [gordon.schmidt s2000.tu-chemnitz de] with
changes by Endre Kollár [taxy443 gmail com].
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@32527 b3059339-0415-0410-9bf9-f77b7e298cf2
This is an internal glibc symbol that should not be used directly.
Besides, other CFLAGS already take care of enabling single Unix v2.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@32348 b3059339-0415-0410-9bf9-f77b7e298cf2
It is not necessary and libfaad2 itself does not do it either.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@32344 b3059339-0415-0410-9bf9-f77b7e298cf2
There is no need to have them separate; in other clean rules we
make an effort to clean up all platforms at the same time.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@32331 b3059339-0415-0410-9bf9-f77b7e298cf2
Dependency files are now generated as a side effect of compilation,
and have no independent creation rules.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@32327 b3059339-0415-0410-9bf9-f77b7e298cf2
