This will allow reiniting the VO when more options are changed without
hardcoding them in options.c
Also reinit the VO when changing --gpu-debug and --gpu-sw.
Previously, using m_option_type_alias required that the alias have the
full name of the option value. This is limited if you are reusing the
same opts struct in different sub options. Fix this by add an additional
field to m_option to signal whether or not prefixes should be taken into
account for the alias option. Instead of blindly using whatever is
stored in opt->priv as the name, we can construct the desired option
name for either case (using the prefix or not).
This adds non-mpv filters to option-info/af/choices and
option-info/vf/choices, which allows completing them with set af/vf
<Tab> in console.lua.
Partial fix of #13017. Getting the filter options would required adding
af-list and vf-list properties.
mpv's core does not propagate option notifications unless they actually
change to the rest of the player. Most of the time, this makes perfect
sense. If the user sets fullscreen multiple times, there's no reason to
care about anything other than the change in state. However, there are
certain options where it makes sense to always broadcast a notification
even if the value doesn't change. For example, consider the window-scale
case. A user may set window-scale to some value, resize the window
further through some other means (such as mouse resizing) and then want
to set the window-scale again to the same value as earlier. The
window-scale value did not change from before so no notification is sent
and nothing happens even though it is desirable and expected that it
operates again.
This was solved by making the current-window-scale property writable a
few years ago, but actually the easier solution is to just always force
the option to update on any write. For the big callback, the needed
changes are trivial. Unfortunately, it requires a hot mess in order to
have this work with the m_config_cache_update APIs. Spooky stuff in
there, but it does send the notification now.
This enhancement makes it easier to create constant width property
expansions, useful for the `--term-status-msg`. Additionally, it changes
to `%f` printing with manual zero trimming, which is easier to control
than `%g`. With this method, we can directly specify precision, not just
significant numbers. This approach also avoids overly high precision for
values less than 1, which is not necessary for a generic floating-point
print function.
A new print helper function is added, which can be used with adjusted
precision for specific cases where a different default is needed. This
also unifies the code slightly.
The opt validator functions are casted to generic validator, which has
erased type for value. Calling function by pointer of different
definition is an UB.
Avoid that by generating wrapper function that does proper argument type
conversion and calls validator function. Type erased functions have
mangled type in the name.
Fixes UBSAN failures on Clang 17, which enabled fsanitize=function by
default.
When adding things like brightness or gamma, the video obviously needs a
redraw if paused. This happened to work in the normal case because the
OSD notification triggered a redraw, but if you use no-osd the picture
won't change. Fix this by adding another option flag, UPDATE_VIDEO, and
simply signalling we want a redraw. This gets handled along with the
normal osd redrawing check in the playloop so something like "no-osd add
gamma 1" actually works.
C standard says that `= {0}` activates and initializes first member of
union. We expect whole union to be zeroed, it is used as default value.
Initialize union with one zeroed default instance to ensure proper init.
Fixes: #12711
This makes it easier to apply crops without need to manually calc the
offset. I wanted for it to be top-left corner based, but maybe it was
not that good idea in retrospect.
Also rename scrw/scrh, since they don't refer to screen. It was copied
form m_geometry apply.
--audio-file-auto, --cover-art-auto, and --sub-auto all work by using an
internally hardcoded list that determine what file extensions get
recognized. This is fine and people periodically update it, but we can
actually expose this as a stringlist option instead. This way users can
add or remove any file extension for any type. For the most part, this
is pretty pretty easy and involves making sub_exts, etc. the defaults
for the new options (--audio-file-auto-exts, --cover-art-auto-exts, and
--sub-auto-exts). There's actually one slight complication however. The
input code uses mp_might_be_subtitle_file which guesses if the file drag
and dropped file is a subtitle. The input ctx has no access to mpctx so
we have to be clever here.
For this, the trick is to recognize that we can leverage the
m_option_change_callback. We add a new flag, UPDATE_SUB_EXTS, which
fires when the player starts up. Then in the callback, we can set the
value of sub_exts in external_files to opts->sub_auto_exts. Whenever the
option updates, the callback is fired again and sub_exts updates. That
way mp_might_be_subtitle_file can just operate off of this global
variable instead of trying to mess with the core mpv state directly.
Fixes#12000.
This specific option type is only used for the video aspect. The
underlying type was a float to represent the inputted value, but it's
actually not precise enough. When using something like 4:3, the values
of the incorrect digits are actually significant enough to make av_d2q
return a very funky numerator and denominator which is close to 4/3 but
not quite. This leads to some "off by one pixel" errors. Weirdly, mpv's
actual calculations for this were already being done as double, but then
converted to floats for this specific type. Just drop the conversion
step and leave it all as double which has the precision we need (i.e.
AVRational is now 4/3 for the this case). Fixes#8190.
Changing the CONF_TYPE_FLAG was a bad idea because mpv_node.u.flag
continues to be an int, leading to a mismatch in type sizes which can
lead to problems with memcpy().
ref. #11373
This partially reverts commit 17d91b9d4d.
Ever instance of m_obj_list is a constant and for all of them, the field
is true. Just remove the field all together.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Today, validation is only possible for string type options. But there's
no particular reason why it needs to be restricted in this way, and
there are potential uses, to allow other options to be validated
without forcing the option to have to reimplement parsing from
scratch.
The first part, simply making the validation function an explicit
field instead of overloading priv is simple enough. But if we only do
that, then the validation function still needs to deal with the raw
pre-parsed string. Instead, we want to allow the value to be parsed
before it is validated. That in turn leads to us having validator
functions that should be type aware. Unfortunately, that means we need
to keep the explicit macro like OPT_STRING_VALIDATE() as a way to
enforce the correct typing of the function. Otherwise, we'd have to
have the validator take a void * and hope the implementation can cast
it correctly.
For help, we don't have this problem, as help doesn't look at the
value.
Then, we turn validators that are really help generators into explicit
help functions and where a validator is help + validation, we split
them into two parts.
I have, however, left functions that need to query information for both
help and validation as single functions to avoid code duplication.
In this change, I have not added an other OPT_FOO_VALIDATE() macros as
they are not needed, but I will add some in a separate change to
illustrate the pattern.
Options like --sub-ass-force-style and others could not be changed at
runtime (the changes didn't take any effect). Fix this by using the
brutal approach, and completely reinit the subtitle state when this
happens. Maybe a bit clunky, but for now I'd rather not put more effort
into this.
Fixes: #7689
Mess this into the --geometry option, because I like to be
irresponsible. I considered adding a separate option, but at least this
allows me to defer the question how the hell this should work as
property (geometry simply and inherently does not).
Tested on IceWM only. Option equality test and string output not tested.
Replace use of .min==1 with a proper flag. This is a good idea, because
it has nothing to do with numeric limits (also see commit 9d32d62b61
for how this can go wrong).
With this, m_option.min/max are strictly used for numeric limits.
These used ".min = MP_NOPTS_VALUE" to indicate certain exceptions. This
broke with the recent change to how min/max are handled, which made
setting min or max mean that a value range is used, thus setting max=0.
Fix this by not using magic a value in .min; replace it with a proper
flag.
Fixes: #7596
As an unfortunate disaster, min/max values use the type double, which
causes tons of issues with int64_t types. Anyway, OPT_BYTE_SIZE is often
used as maximum for size_t quantities, which can have a size different
from (u)int64_t.
OPT_BYTE_SIZE still uses in64_t, because in theory, you could use it for
file sizes. (demux.c would for example be capable of caching more than
2GB on 32 bit platforms if a file cache is used. Though for some reason
the accounting code still uses size_t, so that use case is broken. But
still insist that it _could_ be used this way.)
There were various inconsistent attempts to set m_option.max to a value
such that the size_t/int64_t upper limit is not exceeded. Due to the
double max field, this didn't really work correctly. Try to fix this
with the M_MAX_MEM_BYTES constant. It's a good approximation, because on
32 bit it should allow 2GB (untested, also would probably exhaust
address space in practice but whatever), and something "high enough" in
64 bit.
For some reason, clang 11 still warns. But I think this might be a clang
bug, or I'm crazy. The result is correct anyway.
Change all OPT_* macros such that they don't define the entire m_option
initializer, and instead expand only to a part of it, which sets certain
fields. This requires changing almost every option declaration, because
they all use these macros. A declaration now always starts with
{"name", ...
followed by designated initializers only (possibly wrapped in macros).
The OPT_* macros now initialize the .offset and .type fields only,
sometimes also .priv and others.
I think this change makes the option macros less tricky. The old code
had to stuff everything into macro arguments (and attempted to allow
setting arbitrary fields by letting the user pass designated
initializers in the vararg parts). Some of this was made messy due to
C99 and C11 not allowing 0-sized varargs with ',' removal. It's also
possible that this change is pointless, other than cosmetic preferences.
Not too happy about some things. For example, the OPT_CHOICE()
indentation I applied looks a bit ugly.
Much of this change was done with regex search&replace, but some places
required manual editing. In particular, code in "obscure" areas (which I
didn't include in compilation) might be broken now.
In wayland_common.c the author of some option declarations confused the
flags parameter with the default value (though the default value was
also properly set below). I fixed this with this change.
The option code is very old and was added to MPlayer in the early 2000s,
when C99 was still new. MPlayer did not use the "bool" type anywhere,l
and the logical option equivalent to bool, the "flag" option type, used
int, with the convention that only the values 0 and 1 are allowed.
mpv may have hammered many, many additional tentacles to the option
code, but some of the basics never changed, and m_option_type_flag still
uses int. This seems a bit weird, since mpv uses bool for booleans. So
finally introduce an m_option_type_bool. To avoid duplicating too much
code, change the flag code to bool, and "reimplement" m_option_type_flag
on top of m_option_type_bool.
As a "demonstration", change the --fullscreen option to this new type.
Ideally, all options would be changed too bool, and m_option_type_flag
would be removed. But that is a lot of monotonous thankless work, so I'm
not doing it, and making it a painful years long transition.
At the same time, I'm introducing a new concept for option declarations.
Instead of OPT_BOOL(), which define the full m_option struct contents,
there's OPTF_BOOL(), which only takes the option field name itself. The
name is provided via a normal struct field initializer. Other fields
(such as flags) can be provided via designated initializers.
The advantage of this is that we don't need tons of nested vararg
macros. We also don't need to deal with 0-sized varargs being a pain
(and in fact they are not a thing in standard C99 and probably C11).
There is no need to provide a mandatory flags argument either, which is
the reason why so many OPT_ macros are used with a "0" argument. (The
flag argument seems to confuse other developers; they either don't
immediately recognize what it is, and sometimes it's supposed to be the
option's default value.)
Not having to mess with the flag argument in such option macros is also
a reason for the removal of M_OPT_RANGE etc., for the better or worse.
The only place that special-cased the _flag option type was in
command.c; change it to use something effectively very similar that
automatically includes the new _bool option type. Everything else should
be transparent to the change. The fullscreen option change should be
transparent too, as C99 bool is basically an integer type that is
clamped to 0/1 (except in Swift, Swift sucks).
Before this commit, option declarations used M_OPT_MIN/M_OPT_MAX (and
some other identifiers based on these) to signal whether an option had
min/max values. Remove these flags, and make it use a range implicitly
on the condition if min<max is true.
This requires care in all cases when only M_OPT_MIN or M_OPT_MAX were
set (instead of both). Generally, the commit replaces all these
instances with using DBL_MAX/DBL_MIN for the "unset" part of the range.
This also happens to fix some cases where you could pass over-large
values to integer options, which were silently truncated, but now cause
an error.
This commit has some higher potential for regressions.
This was mostly unused, and has certain problems. Just get rid of it.
It was still used in CDDA (--cdda-span) and a debug option for OpenGL
(--opengl-check-pattern). Replace both of these with 2 options, where
each sets the start/end values of the former span. Both were
undocumented somehow (normally we require all options to be documented),
so I'm not caring about compatibility, and not bothering to add it to
the API changelog.
Until now, filter_sdh was simply a function that was called by sd_ass
directly (if enabled).
I want to add another filter, so it's time to turn this into a somewhat
more general subtitle filtering infrastructure.
I pondered whether to reuse the audio/video filtering stuff - but better
not. Also, since subtitles are horrible and tend to refuse proper
abstraction, it's still messed into sd_ass, instead of working on the
dec_sub.c level. Actually mpv used to have subtitle "filters" and even
made subtitle converters part of it, but it was fairly horrible, so
don't do that again.
In addition, make runtime changes possible. Since this was supposed to
be a quick hack, I just decided to put all subtitle filter options into
a separate option group (=> simpler change notification), to manually
push the change through the playloop (like it was sort of before for OSD
options), and to recreate the sub filter chain completely in every
change. Should be good enough.
One strangeness is that due to prefetching and such, most subtitle
packets (or those some time ahead) are actually done filtering when we
change, so the user still needs to manually seek to actually refresh
everything. And since subtitle data is usually cached in ASS_Track (for
other terrible but user-friendly reasons), we also must clear the
subtitle data, but of course only on seek, since otherwise all subtitles
would just disappear. What a fucking mess, but such is life. We could
trigger a "refresh seek" to make this more automatic, but I don't feel
like it currently.
This is slightly inefficient (lots of allocations and copying), but I
decided that it doesn't matter. Could matter slightly for crazy ASS
subtitles that render with thousands of events.
Not very well tested. Still seems to work, but I didn't have many test
cases.
There are a lot of ad-hoc component lists in mpv: for example the stream
and demuxer lists. It doesn't seem to make sense to add any abstractions
around it since they are completely trivial and have very specific
probing mechanisms and so on, so they will remain ad-hoc.
This commits add a way to let these add arbitrary per-component options,
without giving up the ad-hoc way, and without having to dump them into
options.c with lots of ifdeffery (like it was done until now).
Also see next commit.
This was completely broken: it compared the first item of the filter
list only. Apparently I forgot that this is a list. This probably broke
aspects of runtime filter changing probably since commit b16cea750f.
Fix this, and remove some redundant code from obj_settings_equals().
Which is not the same as m_obj_settings_equal(), so rename it to make
confusing them harder. (obj_setting_match() has these very weird label
semantics that should probably just be killed. Or not.)
The exact type name (m_obj_list_t) was removed in 2013. I don't think
this stub comment helps much with understanding this complicated thing
anyway (this code is for the --vf/--af options, and makes up almost half
of m_option.c).
Until now, using a filter not in mpv's builtin filter list would assume
it's a libavfilter filter. If it wasn't, the option value was still
accepted, but creating the filter simply failed. But since this happens
after option parsing, so the result is confusing.
Improve this slightly by checking filter names. This will reject truly
unknown filters at option parsing time. Unfortunately, this still does
not check filter arguments. This would be much more complex, because
you'd have to create a dummy filter graph and allocate the filter. Maybe
another time.
This is preparation to get rid of the option-to-property bridge
(mp_on_set_option). This is a pretty insane thing that redirects
accesses to options to properties. It was needed in the ever ongoing
transition from something to... something else.
A good example for the need of this bridge is applying profiles at
runtime. This obviously goes through the config parser, but should also
make all changes effective, for which traditionally the property layer
is used.
There isn't much left that needs this bridge. This commit changes a
bunch of options (which also have a property implementation) to use
option change notifications instead. Many of the properties are still
left, but perform unrelated functions like OSD formatting.
This should be mostly compatible. There may be some subtle behavior
changes. For example, "hwdec" and "record-file" do not check for changes
anymore before applying them, so writing the current value to them
suddenly does something, while it was ignored before.
DVB changes untested, but should work.
Options marked with this flag were changed to strictly read-only after
initialization (mpv_initialize() in the client API, after option parsing
and config file loading with the CLI player).
This used to be necessary, because there was a single option struct that
could be accessed by multiple threads. For example, --config-dir sets
MPOpts.force_configdir, which was read whenever anything accessed the
mpv config dir (which could be on different threads, e.g. font
initialization tries to lookup fonts.conf from an arbitrary thread).
This isn't needed anymore, because threads now access these in a thread
safe way. In the case of --config-dir, the path is actually just copied
on init.
This M_OPT_FIXED mechanism is thus not strictly needed anymore. It still
prevents writing to some options that cannot take effect at runtime, but
even that can be dropped. In general, all mpv options can be changed any
time at runtime, even if they never take effect, and there's no need to
make an exception for a very low number of options. So just get rid of
it.
Internally, vo_gpu uses NaN for some options to indicate a default value
that is different depending on the context (e.g. different scalers).
There are 2 problems with this:
1. you couldn't reset the options to their defaults
2. NaN is a damn mess and shouldn't be part of the API
The option parser already rejected NaN explicitly, which is why 1.
didn't work. Regarding 2., JSON might be a good example, and actually
caused a bug report.
Fix this by mapping NaN to the special value "default". I think I'd
prefer other mechanisms (maybe just having every scaler expose separate
options?), but for now this will do. See you in a future commit, which
painfully deprecates this and replaces it with something else.
I refrained from using "no" (my favorite magic value for "unset" etc.)
because then I'd have e.g. make --no-scale-param1 work, which in
addition to a lot of effort looks dumb and nobody will use it.
Here's also an apology for the shitty added test script.
Fixes: #6691
This supports named arguments. It benefits from the infrastructure of
async commands.
The plan is to reimplement Lua's utils.subprocess() on top of it.
Removes a good hunk of weird code.
This loses qscale "emulation", some logging, and the fact that duplicate
keys for values starting with +/- were added with AV_DICT_APPEND. I
don't assign those any importance, even if they are user-visible
changes.
The new M_OPT_ flag is just so that nothing weird happens for other
key-value options, which do not interpret a "help" key specially.
Most options starting with --no-<name> are automatically translated to
--<name>=no. Make the code slightly nicer by using a flag instead of
explicitly comparing option types. Also fix an issue that made the
option parser print nonsense error messages for if --no-... was used for
options which don't support it.
--vf=help will now list libavfilter filters, and e.g. --vf=yadif=help
will list libavfilter filter options.
The latter is rather bare, because the AVOption API is really awful
(holy shit how is it so bad), and would require us to handle _every_
option type manually.
Alternatively we could call av_opt_show2(), which ffmpeg uses for help
output in its CLI tools and which is much more detailed. But it's rather
foreign and forces output through av_log(), so I don't really want to
use it.
sfan5
Guido Cella
nanahi
Dudemanguy
Kacper Michajłow
Christoph Heinrich
Thomas Weißschuh
Emil Velikov
Philip Langdale
wm4
Philip Sequeira