This has two reasons:
1. I tend to add new fields to this metadata, and every time I've done
so I've consistently forgotten to update all of the dozens of places in
which this colorimetry metadata might end up getting used. While most
usages don't really care about most of the metadata, sometimes the
intend was simply to “copy” the colorimetry metadata from one struct to
another. With this being inside a substruct, those lines of code can now
simply read a.color = b.color without having to care about added or
removed fields.
2. It makes the type definitions nicer for upcoming refactors.
In going through all of the usages, I also expanded a few where I felt
that omitting the “young” fields was a bug.
We don't support this anymore.
This tries to exit in a controlled way after command line options are
applied in order to honor logging options and, in case of libmpv, not to
kill the host. Not sure if it would be better to just vomit text to
stderr and call abort().
Working towards refcounted sub images, and also for removing bitmap
packers from VOs.
I'm not sure why we even have this overlay-add command. It was sort of
"needed" before opengl-cb was introduced, and before Lua scripts could
put ASS drawings on OSD without conflicting with the OSC. But now trying
to use it doesn't make too much sense anymore.
Still keep it because we're trying to be nice, but throw performance out
of the window. Now image data is copied 2 more times before displaying
it. This also makes using the command a bit simpler.
Of course we can't just skip updating the OSD if the playloop was woken
up for the purpose of removing OSD after an OSD timer expired.
Fixes e.g. OSD bars sometimes sticking along when seeking while paused.
Normally, OSD is updated every time the playloop is run. This has to be
done, because the OSD may implicitly reference various properties,
without knowing whether they really need to be updated or not. (There's
a property update mechanism, but it's mostly unavailable, because OSD is
special-cased and can not use the client API mechanism properly.)
Normally, these updates are no problem, because the OSD is only actually
printed when the OSD text actually changes.
But commit d23ffd24 added a rate-limiting mechanism, which tries to
limit OSD updates at most every 50ms (or the next video frame). Since it
can't know in advance whether the OSD is going to change or not, this
simply waked up the player every 50ms.
Change this so that the player is updated only as part of general
updates determined through mp_notify(). (This function also notifies the
client API of changed properties.) The desired result is that the player
will not wake up at all in normal idle mode, but still update properties
that can change when paused, such as the cache.
This is mostly a cosmetic change (in the sense of making runtime
behavior just slightly better). It has the slightly more negative
consequence that properties which update implicitly (such as "clock")
will not update periodically anymore.
Instead of having 9 different properties, requiring 18 different
VOCTRLs to read them all, they are now exposed as a single property.
This is not only cleaner (since they're all together) but also allows
querying all 9 of them with only a single VOCTRL (by using
mp.get_property_native).
(The extra factor of 2 was due to an extra query being needed to get the
type, which is now also unnecessary)
This makes it much easier to access performance metrics from within a
lua script, and also makes it easier to just show a readable, formatted
version via show-text.
This comes up often, see e.g. #3220. The issue is that if the stream
input is not seekable, the demuxer is marked as not seekable. But if the
stream cache is enabled, the file still _might_ be seekable to a degree.
We recently disabled seeking in this mode because it can cause very
weird issues, mostly because if stream-layer seeking fails, the demuxers
will arbitrarily misbehave. On the other hand, it can work if the seek
is within the cached range, which is why the user can still enable it
with --force-seeking. There is a weird trade-off between allowing this
and not crapping up too easily, so just informing the user about the
possibility seems best.
For clang, it's enough to just put (void) around usages we are
intentionally ignoring the result of.
Since GCC does not seem to want to respect this decision, we are forced
to disable the warning globally.
This is plumbed through a new VOCTRL, VOCTRL_PERFORMANCE_DATA, and
exposed as properties render-time-last, render-time-avg etc.
All of these numbers are in microseconds, which gives a good precision
range when just outputting them via show-text. (Lua scripts can
obviously still do their own formatting etc.)
Signed-off-by: wm4 <wm4@nowhere>
We now have a video filter that uses the d3d11 video processor, so it
makes no sense to have one in the VO interop code. The VO uses it for
formats not directly supported by ANGLE (so the video data is converted
to a RGB texture, which ANGLE can take in).
Change this so that the video filter is automatically inserted if
needed. Move the code that maps RGB surfaces to its own inteorp backend.
Add a bunch of new image formats, which are used to enforce the new
constraints, and to automatically insert the filter only when needed.
The added vf mechanism to auto-insert the d3d11vpp filter is very dumb
and primitive, and will work only for this specific purpose. The format
negotiation mechanism in the filter chain is generally not very pretty,
and mostly broken as well. (libavfilter has a different mechanism, and
these mechanisms don't match well, so vf_lavfi uses some sort of hack.
It only works because hwaccel and non-hwaccel formats are strictly
separated.)
The RGB interop is now only used with older ANGLE versions. The only
reason I'm keeping it is because it's relatively isolated (uses only
existing mechanisms and adds no new concepts), and because I want to be
able to compare the behavior of the old code with the new one for
testing. It will be removed eventually.
If ANGLE has NV12 interop, P010 is now handled by converting to NV12
with the video processor, instead of converting it to RGB and using the
old mechanism to import that as a texture.
Main use: deinterlacing.
I'm not sure how to select the deinterlacing mode at all. You can
enumate the available video processors, but at least on Intel, all of
them either signal support for all deinterlacers, or none (the latter is
apparently used for IVTC). I haven't found anything that actually tells
the processor _which_ algorithm to use.
Another strange detail is how to select top/bottom fields and field
dominance. At least I'm getting quite similar results to vavpp on Linux,
so I'm content with it for now.
Future plans include removing the D3D11 video processor use from the
ANGLE interop code.
This has often been requested for use on OSD. I don't really like having
such "special" properties, but whatever. Hopefully this will be the only
case.
Untested because I'm too damn lazy.
Fixes#2828.
This uses the normal autoprobing rules like "auto", but rejects anything
that isn't flagged as copying data back to system memory.
The chunk in command.c was dead code, so remove it instead of updating
it.
Commit 786f37ae accidentally changed seeking behavior such that
continuous seeking (holding the seek button down) would use the previous
seek target timestamp, instead of the new video timestamp. (This is for
the default mode, seeking to keyframes.)
The result is that the movement on the seekbar is smooth, but the way
the video updates is awkward. Some might actually prefer the new
behavior (and some players effectively show similar bahavior), but I
don't. So restore the old behavior.
This is done in two steps:
First: strictly wait for the entire seek process to finish, which will
effectively make the seeking code pick up the new video timestamp
correctly.
This would play audio immediately, which would result in noise during
continuous seeking, which leads to second: explicitly abort the playback
restarting process if this case is detected, and never play audio.
The main change is with video/hwdec.h. mp_hwdec_info is made opaque (and
renamed to mp_hwdec_devices). Its accessors are mainly thread-safe (or
documented where not), which makes the whole thing saner and cleaner. In
particular, thread-safety rules become less subtle and more obvious.
The new internal API makes it easier to support multiple OpenGL interop
backends. (Although this is not done yet, and it's not clear whether it
ever will.)
This also removes all the API-specific fields from mp_hwdec_ctx and
replaces them with a "ctx" field. For d3d in particular, we drop the
mp_d3d_ctx struct completely, and pass the interfaces directly.
Remove the emulation checks from vaapi.c and vdpau.c; they are
pointless, and the checks that matter are done on the VO layer.
The d3d hardware decoders might slightly change behavior: dxva2-copy
will not use the VO device anymore if the VO supports proper interop.
This pretty much assumes that any in such cases the VO will not use any
form of exclusive mode, which makes using the VO device in copy mode
unnecessary.
This is a big refactor. Some things may be untested and could be broken.
Add --taskbar-progress command line option and property which controls taskbar
progress indication rendering in Windows 7+. This option is on by default and
can be toggled during playback.
This option does not affect the creation process of ITaskbarList3. When the
option is turned off the progress bar is just hidden with TBPF_NOPROGRESS.
Closes#2535
Introduce hwdec-current and hwdec-interop properties.
Deprecate hwdec-detected, which never made a lot of sense, and which is
replaced by the new properties. hwdec-active also becomes useless, as
hwdec-current is a superset, so it's deprecated too (for now).
For "current" markers on OSD properties like chapter-list. The marker is
now an actual arrow instead of "> ", and non-current entries will have
the same indentation as the current entry.
While I'm not entirely sure about the new look of those lists, it's a
bit better than the visual mess that was before.
Because it's annoying and feels unnatural.
If the B point is set while paused, don't seek. If not paused, it should
properly loop immediately.
In theory there's a chance that it will show at least 1 frame after the
loop point when setting the B point. But let's not care about that.
This fixes backstepping getting "stuck" when e.g. holding down a key
bound to the backstep command. The reason is that even if the backstep
itself is finished, the next backstep might not take the new video PTS
as reference if the hr-seek itself isn't finished yet.
The intention of not waiting for the hr-seek to finish was faster
backstepping by possibly skipping audio decoding. But it probably
doesn't matter enough to make the rest of the code more complex.
As a positive side-effect, this also errors out gracefully for the
extremely unlikely but possible case certain builtin filters are not
available. (This could happen only with crippled libavfilter builds that
can't be used by anything using its public API.)
Another crappy fix for timestamp reset issues. This time, we try to fix
files which have very weird but legitimate frame durations, such as
cdgraphics. It can have many short frames, but once in a while there are
potentially very long frames.
Fixes#3027.
Commit 382bafcb changed the behavior for ab-loop-a. This commit changes
ab-loop-b so that the behavior is symmetric.
Adjust the OSD rendering accordingly to the two changes.
Also fix mentions of the "ab_loop" command to the now preferred
"ab-loop".
The check whether video is ready yet was done only in STATUS_FILLING.
But it also switched to STATUS_READY, which means the next time
fill_audio_out_buffers() was called, audio would actually be started
before video.
In most situations, this bug didn't show up, because it was only
triggered if the demuxer didn't provide video packets quickly enough,
but did for audio packets.
Also log when audio is started.
(I hate fill_audio_out_buffers(), why did I write it?)
Strictly schedule an update in regular intervals as long as either
stream cache or demuxer are prefetching. Don't update just always
because the stream cache is enabled ("idle != -1") or cache-related
properties are observed (mp_client_event_is_registered()).
Also, the "idle" variable was awkard; get rid of it with equivalent
code.
Calculate the buffering percentage in the same code which determines
whether the player is or should be buffering. In particular it can't
happen that percentage and buffering state are slightly out of sync due
to calling DEMUXER_CTRL_GET_READER_STATE and reusing it with the
previously determined buffering state.
Now it's also easier to guarantee that the buffering state is updated
properly.
Add some more verbose output as well.
(Damn I hate this code, why did I write it?)
And remove the same thing from the client API code.
The command.c code has to deal with many specialized M_PROPERTY_SET_*
actions, and we bother with a subset only.
If a mpv_node wrapped a string, the behavior was different from calling
mpv_set_property() with MPV_FORMAT_STRING directly. Change this.
The original intention was to be strict about types if MPV_FORMAT_NODE
is used. But I think the result was less than ideal, and the same change
towards less strict behavior was made to mpv_set_option() ages ago.
Niklas Haas
wm4
Ricardo Constantino
Julian
maniak1349
trUSTssc