cehoyos adds the step_property command in 7a71da01d, and it could be
argued that copyright of this still applies to the later add/cycle
commands (a668ae0ff9). While I'm not sure if this is really the case,
stay conservative for now and mark these commands as GPL-only. Mark the
command.c code too, although that is not being relicensed yet.
I'm leaving the MP_CMD_* enum items, as they are obviously different.
In commit 116ca0c768, "veal" (essentially an anonymous author) adds an
"osd_show_property_text" command (well, the commit message says "based
on" that person's code, so it's not clear how much is from him or from
albeu, who agreed to LGPL). This was later merged again with the
"osd_show_text" command, and then all original code was removed in
commit 58cc0f637f, so I claim that no copyright applies anymore. (Though
technically the input.conf addition still might be copyrighted, so I'm
just dropping it to get rid of the thought.)
"kiriuja" added 2f376d1b39 (sub_load etc.) and be54f4813 (switch_audio).
The latter is gone. I would argue that the former is fully rewritten
with commits b7052b431c and 0f155921b0. But like in the step_property
case, I will be overly conservative for now, and mark them as GPL-only,
as this is potentially shaky and should be thought through first. (Not
bothering with the command define/enum in the header, as it will be
unused in LGPL mode anyway.)
keycodes.c/h can be GPL, except for commit 2b1f95dcc2, which is a
patch by someone who wasn't asked yet. Before doing something radical, I
will wait for a reply.
Scalable commands (seek, cycle and add) understand the cmd->scale
parameter and will "scale" their action accordingly, for example, a seek
with scale = 0.5 will only seek half the specified amount and a seek
with scale = 2.0 will seek twice as much.
Mark these commands so in the next commit, input.c will be able to
synthesize input with cmd->scale = 1 for non-scalable commands.
The intention is to give libmpv users as much flexibility to load
scripts as using mpv from CLI, but without restricting libmpv users from
having to decide everything on creation time, or having to go through
hacks like recreating the libmpv context to update state.
With the recent vo_opengl changes it doesn't do anything anymore.
I don't think a deprecation period is necessary, because the command
was always marked as experimental.
Old-style commands using _ as separator (e.g. show_progress) were still
used in some places, including documentation and configuration files.
This commit updates all such instances to the new style (show-progress)
so that commands are easier to find in the manual.
The value 0 was treated specially, and effectively forced the increment
to 1. Interestingly, passing 0 or no value also does not include the
scale (from touchpads etc.), but this is probably an accidental behavior
that was never intentionally added.
Simplify it and make the default increment 1. 0 now means what it
should: the value will not be changed. This is not particularly useful,
but on the other hand there is no need for surprising and unintuitive
semantics.
OARG_CYCLEDIR() failed to apply the default value, because
m_option_type_cycle_dir was missing a copy handler - add this too.
Removes some more internal API calls from the Lua scripting backend.
Which is good, because ideally the scripting backend would use libmpv
functions only.
One awkwardness is that mouse sections are still not supported by the
public commands (and probably will never), so flags like allow-hide-
cursor make no sense to an outside user.
Also, the way flags are passed to the Lua function changes. But that's
ok, because they're only undocumented internal functions, and not
supposed to be used by script users. osc.lua only does due to historical
reasons.
This was requested. It was more or less present internally already and
used for Lua scripting. Lua will switch to the "public" functions in
the following commits.
Nobody wanted to restore this, so it gets the boot.
If anyone still wants to volunteer to restore menu support, this would
be welcome. (I might even try it myself if I feel masochistic and like
wasting a lot of time for nothing.) But if it does get restored, it
should be done differently. There were many stupid things about how it
was done. For example, it somehow tried to pull mp_nav_events through
all the layers (including needing to "buffer" them in the demuxer),
which was needlessly complicated. It could be done simpler.
This code was already inactive, so this commit actually changes nothing.
Also keep in mind that normal DVD/BD playback still works.
So successful playback and user quit can be distinguished, for whatever
reason you may want to do this.
Normally, the "quit" command can be customized, but this does not work
for quit commands sent by the terminal signal handler. One solution
would be introducing something like "ON_SIGNAL" (equivalent to
"CLOSE_WIN"), but considering there are a bunch of possible signals, I'd
rather not get into this. So go with the dumb solution.
Probably fixes#2029.
This command has been deprecated in the 0.8.x and 0.9.x releases - get
rid of it. Its only point ever was MPlayer compatibility, which broke
years ago anyway.
Wnile it seems quite logical to me that commands use _ as word
separator, while properties use -, I can't really explain the
difference, and it tends to confuse users as well. So always
prefer - as separator for everything.
Using _ still works, and will probably forever. Not doing so would
probably create too much chaos and confusion.
Only absolute percentage seeking was permitted first. It is now also
possible to seek by relative percentage.
MPSEEK_FACTOR is used as seek_type.
Fixes#1950.
Signed-off-by: wm4 <wm4@nowhere>
Now the rescan_external_files command will by default reselect the audio
and subtitle streams. This should be more intuitive.
Client API users and Lua scripts might break, but can be fixed in a
backward-compatible way by setting the mode explicitly.
This gets rid of the need for a second (or more) parameters; instead it
can be all in one parameter. The (now) redundant parameter is still
parsed for compatibility, though.
The way the flags make each other conflict is a bit tricky: they have
overlapping bits, and the option parser disallows setting already set
bits.
MPlayer requires numeric values for input command parameters. mplayer2
also did. mpv changed these to choices using symbolic strings a long
time ago, but left numeric choices for compatibility.
These commands are counterparts of sub_add/sub_remove/sub_reload which
work for external audio file.
Signed-off-by: wm4 <wm4@nowhere>
(minor simplification)
New command `mouse <x> <y> [<button> [single|double]]` is introduced.
This will update mouse position with given coordinate (`<x>`, `<y>`),
and additionally, send single-click or double-click event if `<button>`
is given.
Simpler, and leaves the decision to repeat or not fully to the script
(instead of requiring the user to care about it when remapping a script
binding).
The fact that it's a generic command prefix that is parsed even when
using the client API is a bit unclean (because this flag makes sense
for actual key-bindings only), but it's less code this way.
This command was actually requested on IRC ages ago, but I forgot about
it.
The main purpose is that the decoding state can be reset without issuing
a seek, in particular in situations where you can't seek.
This restarts decoding from the middle of the packet stream; since it
discards the packet buffer intentionally, and the decoder will typically
not output "incomplete" frames until it has recovered, it can skip a
large amount of data.
It doesn't clear the byte stream cache - I'm not sure if it should.
A vague idea to get something similar what libquvi did.
Undocumented because it might change a lot, or even be removed. To give
an idea what it does, a Lua script could do the following:
-- type ID priority
mp.commandv("hook_add", "on_load", 0, 0)
mp.register_script_message("hook_run", function(param, param2)
-- param is "0", the user-chosen ID from the hook_add command
-- param2 is the magic value that has to be passed to finish
-- the hook
mp.resume_all()
-- do something, maybe set options that are reset on end:
mp.set_property("file-local-options/name", "value")
-- or change the URL that's being opened:
local url = mp.get_property("stream-open-filename")
mp.set_property("stream-open-filename", url .. ".png")
-- let the player (or the next script) continue
mp.commandv("hook_ack", param2)
end)
Refine the ugly hack from the previous commit, and let the "quit"
command and some others abort playback immediately. For
playlist_next/playlist_prev, still use the old hack, because we can't
know if they would stop playback or not.
This means they get special handling for asynchronously aborting
playback, even if the player is "stuck".
Also document "stop". It seems somewhat useful for client API users
(although that will be implemented properly only in the following
commits.)
Not sure why this was originally added as autorepeated. It makes no
sense, because switching between choices should never autorepeat. (For
the normal "add"/"cycle" commands, autorepeat is usually enabled, but
command.c tries to disable it specifically for choice properties.)
"loadfile filename append-play" will now always append the file to the
playlist, and if nothing is playing yet, start playback. I don't want to
change the semantics of "append" mode, so a new mode is needed.
Probably fixes issue #950.
Convert all these commands to properties. (Except tv_last_channel, not
sure what to do with this.) Also, internally, don't access stream
details directly, but dispatch commands with stream ctrls.
Many of the new properties are a bit strange, because they're write-
only. Also remove some OSD output these commands produced, because I
couldn't be bothered to port these.
In general, this makes everything much cleaner, and will also make it
easier to e.g. move the demuxer to its own thread.
Don't bother updating input.conf, but changes.rst documents how old
commands map to the new ones.
Mostly untested, due to lack of hardware.
Binding multiple commands at once where always considered not
repeatable, because the MP_CMD_COMMAND_LIST wasn't considered
repeatable.
Fixes#807 (probably).
The quit command has an optional argument that is used as exit code.
Extend that to the quit_watch_later command. Actually, unify the
implementations of the two commands.
Requested in #798.
wm4
James Ross-Gowan
Avi Halachmi (:avih)
Timotej Lazar
Philip Sequeira
torque
rrooij
Marcin Kurczewski
xylosper
Martin