Client API users can enable log output with mpv_request_log_messages().
But you can enable only a single log level. This is normally enough, but
the --msg-level option (which controls the terminal log level) provides
more flexibility. Due to internal complexity, it would be hard to
provide the same flexibility for each client API handle. But there's a
simple way to achieve basically the same thing: add an option that sends
log messages to the API handle, which would also be printed to the
terminal as by --msg-level.
The only change is that we don't disable this logic if the terminal is
disabled. Instead we check for this before the message is output, which
in theory can lower performance if messages are being spammed. It could
be handled with some more effort, but the gain would be negligible.
This was traditionally needed to silence terminal output from errors
during command line parsing preparsing. Preparsing is done so that
options controlling the terminal and config files are parsed and applied
first, with a second command line parsing pass applying all other
options, _and_ printing error messages for the preparsed ones.
But the hack silencing log output during the preparse pass is actually
not needed anymore, since the terminal is enabled only after preparsing
is finished. update_logging() in main.c does this.
So as long as update_logging() is called before
m_config_preparse_command_line(), this will work.
Make it accept "," as separator, instead of only ":". Do this by using
the key-value-list parser. Before this, the option was stored as a
string, with the option parser verifying that the option value as
correct. Now it's stored pre-parsed, although the log levels still
require separate verification and parsing-on-use to some degree (which
is why the msg-level option type doesn't go away).
Because the internal type changes, the client API "native" type also
changes. This could be prevented with some more effort, but I don't
think it's worth it - if MPV_FORMAT_STRING is used, it still works the
same, just with a different separator on read accesses.
This allows getting the log at all with --no-terminal and without having
to retrieve log messages manually with the client API. The log level is
hardcoded to -v. A higher log level would lead to too much log output
(huge file sizes and latency issues due to waiting on the disk), and
isn't too useful in general anyway. For debugging, the terminal can be
used instead.
Do so by using mp_subprocess(). Although this uses completely different
code on Unix too, you shouldn't notice a difference. A less ncie thing
is that this reserves an entire thread while the command is running
(which wastes some memory for stack, at least). But this is probably
still the simplest way, and the fork() trick is apparently not
implementable with posix_subprocess().
The one in msg.c was mistakenly removed with commit e99a37f6.
I didn't actually test the change in ao_sndio.c (but obviously "ap"
shouldn't be static).
Maybe using strings for log levels was a mistake (too broad and too
impractical), so I'm adding numeric log level at least for the receiver
side. This makes it easier to map mpv log levels to other logging
systems.
I'm still too stingy to add a function to set the log level by a numeric
value, though.
The numeric values are not directly mapped to the internal mpv values,
because then almost every file in mpv would have to include the client
API header.
Coalesce this into API version 1.6, since 1.6 was bumped just yesterday.
The API could return partial lines, meaning the message could stop
in the middle of a line, and the next message would have the rest of
it (or just the next part of it). This was a pain for the user, so do
the nasty task of buffering the lines ourselves.
Now only complete lines are sent. To make things even easier for the
API user, don't put multiple lines into a single event, but split them.
The terminal output code needed something similar (inserting a prefix
header on start of each line). To avoid code duplication, this commit
refactors the terminal output so that lines are split in a single
place.
The status line is a bit special; for example it uses special control
codes by design and is not terminated with a newline character in order
to update it on the terminal without scrolling. It's not helpful for
client API users either, and would require special-casing them
(emulating aspects of a terminal?). Also, the status line code is
explicitly disabled on osd.c unless the --terminal option is enabled,
so there was no good way to even enable the status line for the API.
Just pretend that the status line does not exist as far as the client
API is concerned. It won't be sent as MPV_EVENT_LOG_MESSAGE.
So client API users don't have to worry about this specifically.
Also document the overflow case. (Not sure if we really need to do
this; maybe it'd be better not to, since this just adds more noise
to the docs.)
bstr.c doesn't really deserve its own directory, and compat had just
a few files, most of which may as well be in osdep. There isn't really
any justification for these extra directories, so get rid of them.
The compat/libav.h was empty - just delete it. We changed our approach
to API compatibility, and will likely not need it anymore.
We already redirect all terminal output through our own wrappers (for
the sake of UTF-8), so we might as well use it to handle ANSI escape
codes.
This also changes behavior on UNIX: we don't retrieve some escape codes
per terminfo anymore, and just hardcode them. Every terminal should
understand them.
The advantage is that we can pretend to have a real terminal in the
normal player code, and Windows atrocities are locked away in glue
code.
Almost nothing was left of it.
The only thing this commit actually removes is support for reading
input commands from stdin. But you can emulate this via:
--input-file=/dev/stdin --input-terminal=no
However, this won't work on Windows. Just use a named pipe.
Not all compilers on all platforms have atomics available (even if they
could, technically speaking).
We don't use atomics that much, only the following things rely on it:
1. the audio pull code, and all audio outputs using it
2. updating global msg levels
3. reading log messages through the client API
Just disable 1. and 3. if atomics are not available. For 2., using fake-
atomics isn't too bad; at worst, message levels won't properly update
under certain situations (but most likely, it will work just fine).
This means if atomics are not available, the client API function
mpv_request_log_messages() will do nothing.
CC: @mpv-player/stable
While I'm not very fond of "const", it's important for declarations
(it decides whether a symbol is emitted in a read-only or read/write
section). Fix all these cases, so we have writeable global data only
when we really need.
Listening on messages currently uses polling (every time
mpv_wait_event() has no new events, the message buffer is polled and a
message event is possibly created). Improve this situation a bit, and
call the user-supplied wakeup callback.
This will increase the frequency with which the wakeup callback is
called, but the client is already supposed to be able to deal with this
situation. Also, as before, calling mpv_wait_event() from the wakeup
callback is forbidden, so the client can't read new messages from the
callback directly.
The wakeup pipe is written either. Since the wakeup pipe is created
lazily, we can't access the pipe handle without creating a race
condition or a deadlock. (This is actually very silly, since in practice
the race condition won't matter, but for now let's keep it clean.)
In my opinion, we shouldn't use atomics at all, but ok.
This switches the mpv code to use C11 stdatomic.h, and for compilers
that don't support stdatomic.h yet, we emulate the subset used by mpv
using the builtins commonly provided by gcc and clang.
This supersedes an earlier similar attempt by Kovensky. That attempt
unfortunately relied on a big copypasted freebsd header (which also
depended on much more highly compiler-specific functionality, defined
reserved symbols, etc.), so it had to be NIH'ed.
Some issues:
- C11 says default initialization of atomics "produces a valid state",
but it's not sure whether the stored value is really 0. But we rely on
this.
- I'm pretty sure our use of the __atomic... builtins is/was incorrect.
We don't use atomic load/store intrinsics, and access stuff directly.
- Our wrapper actually does stricter typechecking than the stdatomic.h
implementation by gcc 4.9. We make the atomic types incompatible with
normal types by wrapping them into structs. (The FreeBSD wrapper does
the same.)
- I couldn't test on MinGW.
Also remove MSGL_SMODE and friends.
Note: The indent in options.rst was added to work around a bug in
ReportLab that causes the PDF manual build to fail.
This collects statistics and other things. The option dumps raw data
into a file. A script to visualize this data is included too.
Litter some of the player code with calls that generate these
statistics.
In general, this will be helpful to debug timing dependent issues, such
as A/V sync problems. Normally, one could argue that this is the task of
a real profiler, but then we'd have a hard time to include extra
information like audio/video PTS differences. We could also just
hardcode all statistics collection and processing in the player code,
but then we'd end up with something like mplayer's status line, which
was cluttered and required a centralized approach (i.e. getting the data
to the status line; so it was all in mplayer.c). Some players can
visualize such statistics on OSD, but that sounds even more complicated.
So the approach added with this commit sounds sensible.
The stats-conv.py script is rather primitive at the moment and its
output is semi-ugly. It uses matplotlib, so it could probably be
extended to do a lot, so it's not a dead-end.
Will be helpful to track down strange wait times and such issues, as
well when you have develop something timing related. (Then you may print
timestamps in your debug output, and the --msgtime timestamps will help
giving context.)
On Windows, no ANSI control sequences are available, so we can't easily
clear lines, move the cursor, etc. It's yet to be decided how this
should be handled (emulate ANSI escapes in osdep/terminal-win.c, or
provide abstracted terminal API functions to unify the Linux and Windows
code).
For now, this fixes the regression that was introduced earlier by the
status line rewrite. It doesn't fix all aspects of status line and
terminal OSD handling, as can be clearly seen by the unconditional use
of terminal_erase_to_end_of_line further down the changed code.
Fixes github issue #499 (sort of).
This avoids stray newlines when:
1. Some (non-status line) text was output
2. Then an empty status line is output
According to the logic, 2. should print an empty line to show the blank
status line. Don't do that, and instead output nothing in this case.
This caused problems with mpv_identify.sh, and also looked ugly when
using --quiet.
Until now, mp_msg output always went to the terminal. There was no way
to grab the stream of output messages. But this will be needed by
various future changes: Lua scripts, slave mode, client library...
This commit allows registering a ring buffer. A callback would be more
straight-forward, but since msg.c sits at the bottom of the lock
hierarchy (it's used by virtually everything), this would probably be a
nightmare. A ring buffer will be simpler and more predictable in the
long run.
We allocate new memory for each ringbuffer entry, which is probably a
bit expensive. We could try to be clever and somehow pack the data
directly into the buffer, but I felt like this wouldn't be worth the
complexity. You'd have to copy the data a bunch of times anyway. I'm
hoping that we can get away with using the ringbuffer mechanism for
low frequency important messages only (and not e.g. for high volume
debug messages), so the cost doesn't matter that much.
A ringbuffer has a simple, single log level. I considered allowing
--msglevel style per-prefix configuration for each ringbuffer, but
that would have been pretty complicated to implement, and wouldn't
have been that useful either.
This makes
mp_msg(x, y, "a\nb\n")
behave the same as
mp_msg(x, y, "a\n")
mp_msg(x, y, "b\n")
which is probably what one would expect. Before this commit, the "b"
line didn't have a prefix when using ths single mp_msg call.
The terminal OSD code includes the handling of the terminal status line,
showing player OSD messages on the terminal, and showing subtitles on
terminal (the latter two only if there is no video window, or if
terminal OSD is forced).
This didn't handle some corner cases correctly. For example, showing an
OSD message on the terminal always cleared the previous line, even if
the line was an important message (or even just the command prompt, if
most other messages were silenced).
Attempt to handle this correctly by keeping track of how many lines the
terminal OSD currently consists of. Since there could be race conditions
with other messages being printed, implement this in msg.c. Now msg.c
expects that MSGL_STATUS messages rewrite the status line, so the caller
is forced to use a single mp_msg() call to set the status line.
Instead of littering print_status() all over the place, update the
status only once per playloop iteration in update_osd_msg(). In audio-
only mode, the status line might now be a little bit off, but it's
perhaps ok.
Print the status line only if it has changed, or if another message was
printed. This might help with extremely slow terminals, although in
audio+video mode, it'll still be updated very often (A-V sync display
changes on every frame).
Instead of hardcoding the terminal sequences, use
terminfo/termcap to get the sequences. Remove the --term-osd-esc option,
which allowed to override the hardcoded escapes - it's useless now.
The fallback for terminals with no escape sequences for moving the
cursor and clearing a line is removed. This somewhat breaks status line
display on these terminals, including the MS Windows console: instead of
querying the terminal size and clearing the line manually by padding the
output with spaces, the line is simply not cleared. I don't expect this
to be a problem on UNIX, and on MS Windows we could emulate escape
sequences. Note that terminal OSD (other than the status line) was
broken anyway on these terminals.
In osd.c, the function get_term_width() is not used anymore, so remove
it. To remind us that the MS Windows console apparently adds a line
break when writint the last column, adjust screen_width in terminal-
win.c accordingly.
