The internal array of default key bindings is removed. Include the
file etc/input.conf at compile time (using the file2header tool), and
parse the default binds from etc/input.conf at startup time.
This lowers maintainance overhead, and makes sure the default bindings
and etc/input.conf don't deviate. Commit f30bf73bf2 already
made sure etc/input.conf matches the default bindings, so this commit
shouldn't change anything user-visible.
Now input.conf is loaded into memory at once, instead of streaming the
file into the parser.
The real reason for this change is that I want to be able to read the
config file from memory. (Using fmemopen() would have been simpler, but
that is available on sane platforms only.)
vo_osd_changed() was a weird function: it was used both to query and
mutate state, which is a bad combination. The VOs used it to query
and reset the state, and the mplayer frontend mostly used it to set
the state. In some cases, the frontend did both (that code used a
variable "int hack" to backup the state and set it again).
Simplify it and make the VOs use a vo_osd_has_changed() function to
query whether the OSD bitmaps have to be recreated. vo_osd_changed()
on the other hand is now used to update state only. The OSD change
state is reset when osd_draw_text() is called.
Update vo_corevideo.m to use vo_osd_resized() as well (forgotten change
from libass-OSD merge).
Simplify osd_set_text() and its usages.
There are still various other RTSP implementations available, such as
libnemesi, live555, and libav. The mplayer native version was a huge
chunk of old unmaintained code.
This was done with the help of callcatcher [1]. Only functions which
are statically known to be unused are removed.
Some unused functions are not removed yet, because they might be needed
in the near future (such as open_output_stream for the encode branch).
There is one user visible change: the --subcc option did nothing, and is
removed with this commit.
[1] http://www.skynet.ie/~caolan/Packages/callcatcher.html
The code to format the playback time was duplicated a few times. There
were also minor differences in how the time is formatted. Remove most
of these differences. This also fixes a bug in the output of the
osd_show_progression command, introduced in 74e7a1e937.
There was some logic to display the percent position in the OSD status
for a short while after seeking. Remove that logic and always display
the percent position.
Make --osd-fractions a flag option. This removes the ability to show
the number of frames played since the start of the current second
(i.e. the fraction of the time was turned into a frame number). This
features wasn't so great anyway, because modern video file formats
don't always have a (valid) FPS set, and could lead to inaccurate
display.
Still to sort out:
Unfortunately, the terminal status is still formatted differently from
the OSD, and even worse, it has a completely different time source.
Not sure if I like how the status line looks now (it's a bit "full"?).
Maybe it will be changed again later.
Summary:
- There is no playtree anymore. It's reduced to a simple list.
- Options are now always global. You can still have per-file options,
but these are optional and require special syntax.
- The slave command pt_step has been removed, and playlist_next
and playlist_prev added. (See etc/input.conf changes.)
This is a user visible incompatible change, and will break slave-mode
applications.
- The pt_clear slave command is renamed to playlist_clear.
- Playtree entries could have multiple files. This is not the case
anymore, and playlist entries have always exactly one entry. Whenever
something adds more than one file (like ASX playlists or dvd:// or
dvdnav:// on the command line), all files are added as separate
playlist entries.
Note that some of the changes are quite deep and violent. Expect
regressions.
The playlist parsing code in particular is of low quality. I didn't try
to improve it, and merely spent to least effort necessary to keep it
somehow working. (Especially ASX playlist handling.)
The playtree code was complicated and bloated. It was also barely used.
Most users don't even know that mplayer manages the playlist as tree,
or how to use it. The most obscure features was probably specifying a
tree on command line (with '{' and '}' to create/close tree nodes). It
filled the player code with complexity and confused users with weird
slave commands like pt_up.
Replace the playtree with a simple flat playlist. Playlist parsers that
actually return trees are changed to append all files to the playlist
pre-order.
It used to be the responsibility of the playtree code to change per-file
config options. Now this is done by the player core, and the playlist
code is free of such details.
Options are not per-file by default anymore. This was a very obscure and
complicated feature that confused even experienced users. Consider the
following command line:
mplayer file1.mkv file2.mkv --no-audio file3.mkv
This will disable the audio for file2.mkv only, because options are
per-file by default. To make the option affect all files, you're
supposed to put it before the first file.
This is bad, because normally you don't need per-file options. They are
very rarely needed, and the only reasonable use cases I can imagine are
use of the encode backend (mplayer encode branch), or for debugging. The
normal use case is made harder, and the feature is perceived as bug.
Even worse, correct usage is hard to explain for users.
Make all options global by default. The position of an option isn't
significant anymore (except for options that compensate each other,
consider --shuffle --no-shuffle).
One other important change is that no options are reset anymore if a
new file is started. If you change settings with slave mode commands,
they will not be changed by playing a new file. (Exceptions include
settings that are too file specific, like audio/subtitle stream
selection.)
There is still some need for per-file options. Debugging and encoding
are use cases that profit from per-file options. Per-file profiles (as
well as per-protocol and per-VO/AO options) need the implementation
related mechanisms to backup and restore options when the playback file
changes.
Simplify the save-slot stuff, which is possible because there is no
hierarchical play tree anymore. Now there's a simple backup field.
Add a way to specify per-file options on command line. Example:
mplayer f1.mkv -o0 --{ -o1 f2.mkv -o2 f3.mkv --} f4.mkv -o3
will have the following options per file set:
f1.mkv, f4.mkv: -o0 -o3
f2.mkv, f3.mkv: -o0 -o3 -o1 -o2
The options --{ and --} start and end per-file options. All files inside
the { } will be affected by the options equally (similar to how global
options and multiple files are handled). When playback of a file starts,
the per-file options are set according to the command line. When
playback ends, the per-file options are restored to the values when
playback started.
This was intended for translating filenames from filesystem charset to
the terminal charset. Modern sane platforms use UTF-8 for everything,
and on Windows we use unicode APIs, so this is not needed anymore.
Remove filename_recode, all uses of it, options and configure checks
related to terminal output charset, and code that tries to determine
the same.
This had very limited usefulness, and you're much better off using
ffmpeg directly. Even if that should not be sufficient, the mplayer
encoding branch might provide a better way out.
Including <malloc.h>, especially if all you want is malloc(), has no
legitimate uses (on sane platforms at least). Remove the check for it,
and remove all uses in the code.
Remove unused check for alloca().
Pausing the player used to print the message "===== PAUSE =====". It
also inserted a newline for some reason. When pausing and unpausing a
lot, the terminal would be clobbered with "old" useless status lines.
Remove the pause message, and display the status message instead. This
looks better, doesn't fill up the terminal with crap, and needs less
code.
Side note: when cache is enabled, the status line is reprinted on every
idle iteration to reflect possible cache changes. If the platform's
WAKEUP_PERIOD is very small (like on Windows) and terminal output is
slow (like on Windows), it's possible that this leads to a minor
performance degradation. This is probably not a problem (and I don't
care anyway), but maybe something that should be kept in mind.
Disabling the status line with --quiet will help.
Most of these demuxers and decoders are provided in better form by
libav, while the mplayer builtin ones are essentially unmaintained. The
only legimitate use case for not using the libav ones was working around
libav bugs or bugs related to the way mplayer uses libav. Instead of
trying to keep dead code alive, development effort should go into
improving libav or the mplayer libav glue code.
Note that the libav demuxer have been preferred over the mplayer builtin
ones for a while in mplayer2. There were some exceptions: playing DVDs
with dvdnav or playing network sources. (That's because some stream
modules and network.c requested explicit file formats, such as
DEMUXER_TYPE_MPEG_PS, which mapped to builtin demuxers.) With this
commit, they are switched to use libav. One caveat is that the requested
format is not passed to libavformat, instead we rely on the auto probing
to select the correct libav demuxer (see code in demux_open_stream()).
The old option parser required adding two options for each flag option:
e.g. "-video" and "-novideo". Later, code was added to handle the "no-"
prefix automatically for flag options. Remove the "no" prefixed options
entirely (unless they are not flag options, then just rename them), and
require the user to use the "no-" prefix instead.
You can't use the old prefix anymore.
Old: -novideo
New: --no-video
Instead of displaying audio and video separately, there's now one
position printed. The idea is that displaying both audio and video
position is redundant. The A/V synchronisation is still printed, so
that you can see if the video time is off.
Also, always print the duration of the file, not only when playing
audio only.
Print "ct" (average A/V sync change) and the number of dropped frame
only if they're significant.
Remove output of outdated and crapified things, like frame position
(these can't be reasonably done with modern media formats, and the
playback code paths for these don't touch them).
This will break some slave mode applications, because they attempt to
parse the status line.
The code used for benchmarking and showing CPU stats in the status line
was inaccurate, misleading and fragile. The final nail in the coffin is
the fact that many libav decoders are multithreaded now, and mplayer
couldn't possibly measure the CPU time consumed by them.
Add the --untimed option. This makes the video untimed, just like
--benchmark did (still requires disabling audio synchronization).
libass is way too chatty. The application using it shouldn't be forced
to print useless messages, especially not if the action was initiated
by the application, and libass successfully completes it.
Note that this might be a problem that should be fixed in libass, but
remapping the log levels is needed anyway (instead of relying on the
coincidence that the log level values are similar).
The msg level for the version output is elevated to verbose. When
running mplayer without arguments, the version is printed a second
time (with default msg level) before the help output.
PulseAudio is rather high on the auto proving order (to avoid using an
emulated sound API), but it prints an annoying error message if the
PA client library can't connect to a server. On the other hand, we do
want this error message printed if the user explicitly selects the
pulse audio output driver.
Add a flag to indicate that an AO is opened due to auto probing.
ao_pulse checks that flag, and if it's set, do not print if the
initialization error is PA_ERR_CONNECTIONREFUSED, whcih I assume is
the error signalling PulseAudio unavailability. (This error happens
if no PulseAudio server is installed.)
By default mplayer attempts to use LIRC. If LIRC can't be opened, a
bunch of warnings are printed. Since mplayer is often built with LIRC
enabled by default, many users will see these rather pointless
warnings. Lower verbosity, so that the warnings are not visible by
default anymore.
Someone on the internet once told me that MAD is the best mp3 decoder
(and better than mpg123), so he must be right. I used to force mad in
my config file, but now I'm annoyed by the line "Forced audio codec"
that goes along with it.
Because I think that message is necessary and needed to discourage
users from doing stupid things, but I still want to get rid of this
message, I'm simply moving MAD up in the codec selection order.
(Please look away.)
When playing a file, users (i.e. me) expect mplayer to print a list of
video/audio/subtitle streams. Currently, this is done in each demuxer
separately. This also means the output is formatted differently
depending which demuxer is active.
Add code to print an uniformly formatted streams list in the player
front end. Extend the streams headers to export additional information
about the streams. Change the lavf and mkv demuxers to follow this new
scheme, and raise the log level for the "old" printing functions.
The intention is to make every demuxer behave like this eventually.
The stream list output attempts to provide codec information. It's a
bit hacky and doesn't always provide useful output, and I'm not sure
how to do it better.
Both VOs will now by default try to set vsync according to the global
vsync setting. By default, vsync is enabled, and passing --no-vsync will
disable it.
The --vsync option used to matter for vo_vesa only, but that VO has been
removed.
This used /dev/rtc for timing. /dev/rtc root only by default, and I
have a hard time believing that the standard OS functions are not good
enough. (Even if not, support for POSIX high resolution timers should
be added instead, see clock_gettime() and others.)
