iive agreed to relicense things that are still in mpv to LGPLv2.1. So
change the licenses of the affected files, and rename the configure
switch for LGPL mode to --enable-preliminary-lgpl2.
(The "preliminary" part will probably be removed from the configure
switch soon as well.)
Also player/main.c hasn't had GPL parts since a few commits ago.
This currently is only limited to Android. Its stdlib contains the
things that mpv's POSIX check checks for, but unfortunately not
glob().
This fixes Android compilation broken in 70a70b9da .
cehoyos, who did not agree to the relicensing, added bcb5c78ce3. If
there was copyright, we consider it gone, because the table changed. It
does not map file extension to a FourCC anymore, and codecs.conf is
gone. The new mapping is a libavcodec codec name (happens to be the same
as the file extension).
The same applies to commits 60ecafec, b749836b, 5b3e3be1. None of these
authors were contacted. These were before the code was replaced with a
table (in d0326807). The parts outside of demux_mf.c were removed a long
time ago. Like in the previous comment, we don't think any copyright
applies at least to the new code (at least after the FourCC removal).
iive authored 0aa37a0d, which is probably still left in some form, and
makes demux_mf.c "LGPL 3 or later".
stream_avdevice.c (unrelated) has been marked as LGPL before.
Similar purpose as f34e1a0dee.
Somehow this is much more natural too, and needs less code.
This breaks runtime updates to duration. This could easily be fixed, but
no important demuxer does this anyway. Only demux_raw and demux_disc
might (the latter for BD/DVD). For the latter it might actually have
some importance when changing titles at runtime (I guess?), but guess
what, I don't care.
This is more uniform, and potentially gets rid of some past copyrights.
It might be that this subtly changes caching behavior (it seems before
this, it synced to the demuxer if the length was unknown, which is not
what we want.)
Because it's kind of dumb. (But not sure if it was worth the trouble.)
For stream_file.c, we add new explicit fields. The rest are rather
special uses and can be killed by comparing the stream impl. name.
The changes to DVD/BD/CD/TV are entirely untested.
Don't access MPOpts directly, and always use the new m_config.h
functions for accessing them in a thread-safe way.
The goal is eventually removing the mpv_global.opts field, and the
demuxer/stream-layer specific hack that copies MPOpts to deal with
thread-safety issues.
This moves around a lot of options. For one, we often change the
physical storage location of options to make them more localized,
but these changes are not user-visible (or should not be). For
shared options on the other hand it's better to do messy direct
access, which is worrying as in that somehow renaming an option
or changing its type would break code reading them manually,
without causing a compilation error.
Instead of passing through double float timestamps opaquely, pass real
timestamps. Do so by always setting a valid timebase on the
AVCodecContext for audio and video decoding.
Specifically try not to round timestamps to a too coarse timebase, which
could round off small adjustments to timestamps (such as for start time
rebasing or demux_timeline). If the timebase is considered too coarse,
make it finer.
This gets rid of the need to do this specifically for some hardware
decoding wrapper. The old method of passing through double timestamps
was also a bit questionable. While libavcodec is not supposed to
interpret timestamps at all if no timebase is provided, it was
needlessly tricky. Also, it actually does compare them with
AV_NOPTS_VALUE. This change will probably also reduce confusion in the
future.
Ever since a change in mplayer2 or so, relative seeks were translated to
absolute seeks before sending them to the demuxer in most cases. The
only exception in current mpv is DVD seeking.
Remove the SEEK_ABSOLUTE flag; it's not the implied default. SEEK_FACTOR
is kept, because it's sometimes slightly useful for seeking in things
like transport streams. (And maybe mkv files without duration set?)
DVD seeking is terrible because DVD and libdvdnav are terrible, but
mostly because libdvdnav is terrible. libdvdnav does not expose seeking
with seek tables. (Although I know xbmc/kodi use an undocumented API
that is not declared in the headers by dladdr()ing it - I think the
function is dvdnav_jump_to_sector_by_time().) With the current mpv
policy if not giving a shit about DVD, just revert our half-working seek
hacks and always use dvdnav_time_search(). Relative seeking might get
stuck sometimes; in this case --hr-seek=always is recommended.
This is mainly a refactor. I'm hoping it will make some things easier
in the future due to cleanly separating codec metadata and stream
metadata.
Also, declare that the "codec" field can not be NULL anymore. demux.c
will set it to "" if it's NULL when added. This gets rid of a corner
case everything had to handle, but which rarely happened.
The demuxer infrastructure was originally single-threaded. To make it
suitable for multithreading (specifically, demuxing and decoding on
separate threads), some sort of tripple-buffering was introduced. There
are separate "struct demuxer" allocations. The demuxer thread sets the
state on d_thread. If anything changes, the state is copied to d_buffer
(the copy is protected by a lock), and the decoder thread is notified.
Then the decoder thread copies the state from d_buffer to d_user (again
while holding a lock). This avoids the need for locking in the
demuxer/decoder code itself (only demux.c needs an internal, "invisible"
lock.)
Remove the streams/num_streams fields from this tripple-buffering
schema. Move them to the internal struct, and protect them with the
internal lock. Use accessors for read access outside of demux.c.
Other than replacing all field accesses with accessors, this separates
allocating and adding sh_streams. This is needed to avoid race
conditions. Before this change, this was awkwardly handled by first
initializing the sh_stream, and then sending a stream change event. Now
the stream is allocated, then initialized, and then declared as
immutable and added (at which point it becomes visible to the decoder
thread immediately).
This change is useful for PR #2626. And eventually, we should probably
get entirely of the tripple buffering, and this makes a nice first step.
There's no reason why parts of this demuxer would be in a separate
source file. The existence of this code is already somewhat questionable
anyway, so it may as well be dumped into a single file.
Even stranger that demux.c included mf.h for no reason (it was an
artifact from 2002 when the architecture was uncleaner).
The TV code pretends to be part of stream/, but it's actually demuxer
code too. The audio_in code is shared between the TV code and
stream_radio.c, so stream_radio.c needs a small hack until stream.c is
converted.
This used to be needed to access the generic stream header from the
specific headers, which in turn was needed because the decoders had
access only to the specific headers. This is not the case anymore, so
this can finally be removed again.
Also move the "format" field from the specific headers to sh_stream.
Instead of having each demuxer do it (only demux_mkv actually did...),
let generic code determine whether the file is seekable. This requires
adding exceptions to demuxers where the stream is not seekable, but the
demuxer is.
Sort-of try to improve handling of unseekable files in the player. Exit
early if the file is determined to be unseekable, instead of resetting
all decoders and then performing a pointless seek.
Add an exception to allow seeking if the file is not seekable, but the
stream cache is enabled. Print a warning in this case, because seeking
outside the cache (which we can't prevent since the demuxer is not aware
of this problem) still messes everything up.
Pointless, using stream->start_pos/end_pos instead.
demux_mf was the only place where this was used specially, but we can
rely on timestamps instead for this case.
All demuxers make a reasonable effort to set packet timestamps, and thus
support correct-pts mode. This commit also implicitly switches
demux_rawvideo to correct-pts mode.
We still allow demuxers to disable correct-pts mode in theory.
Get rid of the strange and messy reliance on DEMUXER_TYPE_ constants.
Instead of having two open functions for the demuxer callbacks (which
somehow are both optional, but you can also decide to implement both...),
just have one function. This function takes a parameter that tells the
demuxer how strictly it should check for the file headers. This is a
nice simplification and allows more flexibility.
Remove the file extension code. This literally did nothing (anymore).
Change demux_lavf so that we check our other builtin demuxers first
before libavformat tries to guess by file extension.
This removes the dependency on DEMUXER_TYPE_* and the file_format
parameter from the stream open functions.
Remove some of the playlist handling code. It looks like this was
needed only for loading linked mov files with demux_mov (which was
removed long ago).
Delete a minor bit of dead network-related code from stream.c as well.
Generally remove all accesses to demux_stream from all the code, except
inside of demux.c. Make it completely private to demux.c.
This simplifies the code because it removes an extra concept. In demux.c
it is reduced to a simple packet queue. There were other uses of
demux_stream, but they were removed or are removed with this commit.
Remove the extra "ds" argument to demux fill_buffer callback. It was
used by demux_avi and the TV pseudo-demuxer only.
Remove usage of d_video->last_pts from the no-correct-pts code. This
field contains the last PTS retrieved after a packet that is not NOPTS.
We can easily get this value manually because we read the packets
ourselves. Reuse sh_video->last_pts to store the packet PTS values. It
was used only by the correct-pts code before, and like d_video->last_pts,
it is reset on seek. The behavior should be exactly the same.
These separate arrays were used by the old demuxers and are not needed
anymore. We can simplify track switching as well.
One interesting thing is that stream/tv.c (which is a demuxer) won't
respect --no-audio anymore. It will probably work as expected, but it
will still open an audio device etc. - this is because track selection
is now always done with the runtime track switching mechanism. Maybe
the TV code could be updated to do proper runtime switching, but I
can't test this stuff.
Seems like a completely unnecessary complication. Instead, always add a
1 byte padding (could be extended if a caller needs it), and clear it.
Also add some documentation. There was some, but it was outdated and
incomplete.
Doing 'mpv mf://*' in a file with directories would crash, because even
though directories are skipped, the corresponding file entry is just
left at NULL, leading to a segfault on access. So explicitly skip NULL
entries.
The percent position is used for the OSD, the status line, and for the
OSD bar (shown on seeks). By default, the PTS of the last demuxed packet
was used to calculate it. This led to a "jumpy" display when the
percentage value (casted to int) was changing. The reasons for this were
the presence of video frame reordering (packet PTS is not monotonic), or
getting PTS values from different streams (like audio/subs).
Since these rely on PTS values and correct file durations anyway,
simplify it by calculating it with the current playback position in
mplayer.c instead.
And support the PIX_FMT_MONOWHITE pixel format. (This is really weird:
unlike PIX_FMT_MONOBLACK, it uses white pixels. I have no idea why
libavcodec doesn't just convert the pixel format on the fly, instead of
bothering everyone with really special pixel formats.)
wm4
Jan Ekström
Dmitrij D. Czarkoff
Marcin Kurczewski
Stefano Pigozzi