The m_option_type_flag is still needed for the CONF_TYPE_FLAG
(next commit).
Add a comment that m_option_type_flag shouldn't be used.
ref. #11373
This partially reverts commit 07545657bf.
In debug mode the macro causes an assertion failure.
In release mode it works differently and tells the compiler that it can
assume the codepath will never execute. For this reason I was conversative
in replacing it, e.g. in mpv-internal code that exhausts all valid values
of an enum or when a condition is clear from directly preceding code.
Nearly all the code base correctly references the data as constant. But
a couple of instances - fix those.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Ever instance of m_obj_list is a constant and for all of them, the field
is true. Just remove the field all together.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Currently using mpv --msg-level=help, shows an instance of --msglevel
(missing dash). Seems like the help message was only partially updated
with the -msglevel -> --msg-level transition.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
This allows configuring which options are saved by quit-watch-later.
Fixes#4126, #4641 and #5567.
Toggling a video or audio filter twice would treat the option as changed
because the backup value is NULL, and the current value of vf/af is a
list with one empty item, so obj_settings_list_equal had to be changed.
Today, validation is only possible for string type options. But there's
no particular reason why it needs to be restricted in this way, and
there are potential uses, to allow other options to be validated
without forcing the option to have to reimplement parsing from
scratch.
The first part, simply making the validation function an explicit
field instead of overloading priv is simple enough. But if we only do
that, then the validation function still needs to deal with the raw
pre-parsed string. Instead, we want to allow the value to be parsed
before it is validated. That in turn leads to us having validator
functions that should be type aware. Unfortunately, that means we need
to keep the explicit macro like OPT_STRING_VALIDATE() as a way to
enforce the correct typing of the function. Otherwise, we'd have to
have the validator take a void * and hope the implementation can cast
it correctly.
For help, we don't have this problem, as help doesn't look at the
value.
Then, we turn validators that are really help generators into explicit
help functions and where a validator is help + validation, we split
them into two parts.
I have, however, left functions that need to query information for both
help and validation as single functions to avoid code duplication.
In this change, I have not added an other OPT_FOO_VALIDATE() macros as
they are not needed, but I will add some in a separate change to
illustrate the pattern.
Accepting ":" in addition to "," seems confusing and dumb. It only
causing problems when you want to pass a value that contains ":". Remove
support for ":", it is now treated like any other normal character. This
affects all options that are listed as "Key/value list" in the option
list.
It's possible that this breaks for someone who happened to use ":" as
separator. But this was undocumented, and never recommended. Originally,
the option treated many other characters in a special way, but this was
changed in commit a3d561f950. I'm, not sure why ":" was explicitly
included. Maybe because -the absurd -vf/--af syntax uses ":" as list
separator. But "," was always recommended and used in examples for
key/value options.
Fixes: #8021 (if you consider it a bug)
Mess this into the --geometry option, because I like to be
irresponsible. I considered adding a separate option, but at least this
allows me to defer the question how the hell this should work as
property (geometry simply and inherently does not).
Tested on IceWM only. Option equality test and string output not tested.
Replace use of .min==1 with a proper flag. This is a good idea, because
it has nothing to do with numeric limits (also see commit 9d32d62b61
for how this can go wrong).
With this, m_option.min/max are strictly used for numeric limits.
This was optional, with the intention that normally such options require
a valid format. But there is no reason for this (at least not anymore),
and it's actually more logical to accept "no" in all situations this
option type is used. This also gets rid of the weird min field special
use.
These used ".min = MP_NOPTS_VALUE" to indicate certain exceptions. This
broke with the recent change to how min/max are handled, which made
setting min or max mean that a value range is used, thus setting max=0.
Fix this by not using magic a value in .min; replace it with a proper
flag.
Fixes: #7596
Since double has a mantissa too small to hold INT64_MAX in full
precision, converting INT64_MAX to double rounds up. Insert some casts
to silence corresponding warnings (as shown by clang 11).
Also, the comparison in multiply_int64() was incorrect (I think...),
because if v==(double)INT64_MAX, then v==(1<<64), which cannot be
represented as int64_t.
There are probably better ways to solve this.
Forgot to remove this. Here you see my confusion and realization how
casting INT64_MAX to double becomes INT64_MAX+1 (due to mantissa
precision and rounding), so some things seemed not to make sense at
first.
The option code is very old and was added to MPlayer in the early 2000s,
when C99 was still new. MPlayer did not use the "bool" type anywhere,l
and the logical option equivalent to bool, the "flag" option type, used
int, with the convention that only the values 0 and 1 are allowed.
mpv may have hammered many, many additional tentacles to the option
code, but some of the basics never changed, and m_option_type_flag still
uses int. This seems a bit weird, since mpv uses bool for booleans. So
finally introduce an m_option_type_bool. To avoid duplicating too much
code, change the flag code to bool, and "reimplement" m_option_type_flag
on top of m_option_type_bool.
As a "demonstration", change the --fullscreen option to this new type.
Ideally, all options would be changed too bool, and m_option_type_flag
would be removed. But that is a lot of monotonous thankless work, so I'm
not doing it, and making it a painful years long transition.
At the same time, I'm introducing a new concept for option declarations.
Instead of OPT_BOOL(), which define the full m_option struct contents,
there's OPTF_BOOL(), which only takes the option field name itself. The
name is provided via a normal struct field initializer. Other fields
(such as flags) can be provided via designated initializers.
The advantage of this is that we don't need tons of nested vararg
macros. We also don't need to deal with 0-sized varargs being a pain
(and in fact they are not a thing in standard C99 and probably C11).
There is no need to provide a mandatory flags argument either, which is
the reason why so many OPT_ macros are used with a "0" argument. (The
flag argument seems to confuse other developers; they either don't
immediately recognize what it is, and sometimes it's supposed to be the
option's default value.)
Not having to mess with the flag argument in such option macros is also
a reason for the removal of M_OPT_RANGE etc., for the better or worse.
The only place that special-cased the _flag option type was in
command.c; change it to use something effectively very similar that
automatically includes the new _bool option type. Everything else should
be transparent to the change. The fullscreen option change should be
transparent too, as C99 bool is basically an integer type that is
clamped to 0/1 (except in Swift, Swift sucks).
Before this commit, option declarations used M_OPT_MIN/M_OPT_MAX (and
some other identifiers based on these) to signal whether an option had
min/max values. Remove these flags, and make it use a range implicitly
on the condition if min<max is true.
This requires care in all cases when only M_OPT_MIN or M_OPT_MAX were
set (instead of both). Generally, the commit replaces all these
instances with using DBL_MAX/DBL_MIN for the "unset" part of the range.
This also happens to fix some cases where you could pass over-large
values to integer options, which were silently truncated, but now cause
an error.
This commit has some higher potential for regressions.
Move the "old" mostly command line parsing and option management related
code to m_config_frontend.c/h. Move the the code that enables other part
of the player to access options to m_config_core.c/h. "frontend" is out
of lack of creativity for a better name.
Unfortunately, the separation isn't quite clean yet. m_config_frontend.c
still references some m_config_core.c implementation details, and
m_config_new() is even left in m_config_core.c for now. There some odd
functions that should be removed as well (marked as "Bad functions").
Fixing these things requires more changes and will be done separately.
struct m_config is left with the current name to reduce diff noise.
Also, since there are a _lot_ source files that include m_config.h, add
a replacement m_config.h that "redirects" to m_config_core.h.
This was mostly unused, and has certain problems. Just get rid of it.
It was still used in CDDA (--cdda-span) and a debug option for OpenGL
(--opengl-check-pattern). Replace both of these with 2 options, where
each sets the start/end values of the former span. Both were
undocumented somehow (normally we require all options to be documented),
so I'm not caring about compatibility, and not bothering to add it to
the API changelog.
This option type, used by --audio-channels, had a completely broken
m_option_type.equal implementation, and thus reacted incorrectly to
runtime option changes.
Broken since commit b16cea750f.
keyvalue_list_find_key() was called on a "partially" constructed list,
because the terminating NULL was added only later. Didn't I say this
code is cursed?
Fixes: #7273
This was completely broken: it compared the first item of the filter
list only. Apparently I forgot that this is a list. This probably broke
aspects of runtime filter changing probably since commit b16cea750f.
Fix this, and remove some redundant code from obj_settings_equals().
Which is not the same as m_obj_settings_equal(), so rename it to make
confusing them harder. (obj_setting_match() has these very weird label
semantics that should probably just be killed. Or not.)
I don't even know anymore whether this was intended or not. Certain use
cases for the "-o" options might require this. These options are for
passing general FFmpeg options. These are translated to av_opt_set()
calls, which may or may not accumulate the option values on multiple
calls with the same option name (how should I know?).
Anyway, it seems crazy to allow non-unique keys, so make them unique.
The ad-hoc nature of the option code makes this wonderfully complicated
(when I wrote that this code is cursed, I meant it). In combination with
lazy testing, it probably means there are lots of bugs here.
Whenever I deal with this, I have to look at the code to make sense of
this. And beyond that, there are some strange inconsistencies. (I think
this code is cursed. It always was, and maybe always will be.)
Although the manpage claimed that using multiple items for -add etc. is
deprecated, string list options didn't warn against it. So add the
warning, and add something in the changelog (even though nobody will
ever read this).
The manpage mentioned --vf-append, but this didn't even exist. So add
it, I guess. We encourage using -append for the other option types, so
for consistency, it should work on filter options. (And I already
tricked me into believing it existed when I mentioned it in the
manpage.)
Make the "operations" table separate for all option types, and mention
the option type on every single of the top-level list options.
This is for the previous commit, and should affect behavior with the
special M_PROPERTY_GET_CONSTRICTED_TYPE mechanism only. The effect is
that cycling the "edition" property, if the option is set to "auto",
will change to the second edition instead of the first.
Normally, option values must always be within their range, so this
should not affect anything else. M_PROPERTY_GET_CONSTRICTED_TYPE is
sort-of fine with this kind of behavior.
If this affects any other M_PROPERTY_GET_CONSTRICTED_TYPE users
neqatively, I will revert the change.
Until now, using a filter not in mpv's builtin filter list would assume
it's a libavfilter filter. If it wasn't, the option value was still
accepted, but creating the filter simply failed. But since this happens
after option parsing, so the result is confusing.
Improve this slightly by checking filter names. This will reject truly
unknown filters at option parsing time. Unfortunately, this still does
not check filter arguments. This would be much more complex, because
you'd have to create a dummy filter graph and allocate the filter. Maybe
another time.
Internally, vo_gpu uses NaN for some options to indicate a default value
that is different depending on the context (e.g. different scalers).
There are 2 problems with this:
1. you couldn't reset the options to their defaults
2. NaN is a damn mess and shouldn't be part of the API
The option parser already rejected NaN explicitly, which is why 1.
didn't work. Regarding 2., JSON might be a good example, and actually
caused a bug report.
Fix this by mapping NaN to the special value "default". I think I'd
prefer other mechanisms (maybe just having every scaler expose separate
options?), but for now this will do. See you in a future commit, which
painfully deprecates this and replaces it with something else.
I refrained from using "no" (my favorite magic value for "unset" etc.)
because then I'd have e.g. make --no-scale-param1 work, which in
addition to a lot of effort looks dumb and nobody will use it.
Here's also an apology for the shitty added test script.
Fixes: #6691
The conversion to string as the pretty printer returns it is
sometimes used on OSD. I think it's pretty odd that quantities below 1
KB are shown as number without suffix. So use "B" for them.
For orthogonality, allow the same for parsing. (Although strictly
speaking, this is not a requirement of the option API. Option parsers
don't need to accept pretty-printed strings.)
Removes a good hunk of weird code.
This loses qscale "emulation", some logging, and the fact that duplicate
keys for values starting with +/- were added with AV_DICT_APPEND. I
don't assign those any importance, even if they are user-visible
changes.
The new M_OPT_ flag is just so that nothing weird happens for other
key-value options, which do not interpret a "help" key specially.
Most options starting with --no-<name> are automatically translated to
--<name>=no. Make the code slightly nicer by using a flag instead of
explicitly comparing option types. Also fix an issue that made the
option parser print nonsense error messages for if --no-... was used for
options which don't support it.
--vf=help will now list libavfilter filters, and e.g. --vf=yadif=help
will list libavfilter filter options.
The latter is rather bare, because the AVOption API is really awful
(holy shit how is it so bad), and would require us to handle _every_
option type manually.
Alternatively we could call av_opt_show2(), which ffmpeg uses for help
output in its CLI tools and which is much more detailed. But it's rather
foreign and forces output through av_log(), so I don't really want to
use it.
Instead of duplicating the append code, reimplement it using the
existing code. The difference between -add and -append is that -append
does not take multiple items (thus removing the need for escaping), but
-append can reuse all code for -add by pretending the separator is never
found.
And use it for 2 demuxer options. It could be used for more options
later. (Though the --cache options can not use this, because they use KB
as base unit.)
Add the print callback to all option types (except pseudo option types
which don't represent values). This makes it less confusing for client
API users (no strange properties that can't be read), and also lists the
default properly with --list-options.
Fix the option type for audio formats - they use int, not uint32_t.
Fix some identation cosmetic issues.
