mpv has a very weak and very annoying policy that determines whether a
playlist should be used or not. For example, if you play a remote
playlist, you usually don't want it to be able to read local filesystem
entries. (Although for a media player the impact is small I guess.)
It's weak and annoying as in that it does not prevent certain cases
which could be interpreted as bad in some cases, such as allowing
playlists on the local filesystem to reference remote URLs. It probably
barely makes sense, but we just want to exclude some other "definitely
not a good idea" things, all while playlists generally just work, so
whatever.
The policy is:
- from the command line anything is played
- local playlists can reference anything except "unsafe" streams
("unsafe" means special stream inputs like libavfilter graphs)
- remote playlists can reference only remote URLs
- things like "memory://" and archives are "transparent" to this
This commit does... something. It replaces the weird stream flags with a
slightly clearer "origin" value, which is now consequently passed down
and used everywhere. It fixes some deviations from the described policy.
I wanted to force archives to reference only content within them, but
this would probably have been more complicated (or required different
abstractions), and I'm too lazy to figure it out, so archives are now
"transparent" (playlists within archives behave the same outside).
There may be a lot of bugs in this.
This is unfortunately a very noisy commit because:
- every stream open call now needs to pass the origin
- so does every demuxer open call (=> params param. gets mandatory)
- most stream were changed to provide the "origin" value
- the origin value needed to be passed along in a lot of places
- I was too lazy to split the commit
Fixes: #7274
keyvalue_list_find_key() was called on a "partially" constructed list,
because the terminating NULL was added only later. Didn't I say this
code is cursed?
Fixes: #7273
This was completely broken: it compared the first item of the filter
list only. Apparently I forgot that this is a list. This probably broke
aspects of runtime filter changing probably since commit b16cea750f.
Fix this, and remove some redundant code from obj_settings_equals().
Which is not the same as m_obj_settings_equal(), so rename it to make
confusing them harder. (obj_setting_match() has these very weird label
semantics that should probably just be killed. Or not.)
I don't even know anymore whether this was intended or not. Certain use
cases for the "-o" options might require this. These options are for
passing general FFmpeg options. These are translated to av_opt_set()
calls, which may or may not accumulate the option values on multiple
calls with the same option name (how should I know?).
Anyway, it seems crazy to allow non-unique keys, so make them unique.
The ad-hoc nature of the option code makes this wonderfully complicated
(when I wrote that this code is cursed, I meant it). In combination with
lazy testing, it probably means there are lots of bugs here.
Whenever I deal with this, I have to look at the code to make sense of
this. And beyond that, there are some strange inconsistencies. (I think
this code is cursed. It always was, and maybe always will be.)
Although the manpage claimed that using multiple items for -add etc. is
deprecated, string list options didn't warn against it. So add the
warning, and add something in the changelog (even though nobody will
ever read this).
The manpage mentioned --vf-append, but this didn't even exist. So add
it, I guess. We encourage using -append for the other option types, so
for consistency, it should work on filter options. (And I already
tricked me into believing it existed when I mentioned it in the
manpage.)
Make the "operations" table separate for all option types, and mention
the option type on every single of the top-level list options.
The generic change detection now handles this just as well.
The way how this function is manually called at init is slightly gross.
Make that part slightly more explicit to hopefully avoid confusion.
This is for the previous commit, and should affect behavior with the
special M_PROPERTY_GET_CONSTRICTED_TYPE mechanism only. The effect is
that cycling the "edition" property, if the option is set to "auto",
will change to the second edition instead of the first.
Normally, option values must always be within their range, so this
should not affect anything else. M_PROPERTY_GET_CONSTRICTED_TYPE is
sort-of fine with this kind of behavior.
If this affects any other M_PROPERTY_GET_CONSTRICTED_TYPE users
neqatively, I will revert the change.
Merged from mpv-repl git repo commit 5ea2bf64f9c239f0326b02. Some
changes were made on top of it:
- Tabs were converted to 4 spaces indentation (plus some manual
indentation fixes in some places).
- All user-visible mentions of "repl" were renamed to "console".
- The README was converted to a manpage (with heavy changes, some
additions taken from stats.rst; rossy converted the key bindings
table to RST).
- The method to change the default key binding was changed.
- Change minor detail about "font" default value setting (not a
functional change).
- Integrate into the player as builtin script, including an option to
prevent loading it.
Above changes and commit message done by wm4.
Signed-off-by: wm4 <wm4@nowhere>
Certain backends (i.e. wayland) will need to do special things with the
mouse. It makes sense to expose the values of these options to them, so
they can behave correctly.
We don't want m_config uninitialization to call random change callbacks.
This happens at the end of mp_destroy(), when almost everything else is
already destroyed, and the change callbacks would probably trigger UB
all over the place.
The change callbacks could be trigger by m_config_restore_backups(),
which is just used as a cheap way to free the remaining state. The worst
is that this depends on which options may still have been part of this
"backup" state, which depends on user input.
Probably never a practical problem, since the backup state is most
likely guaranteed to be empty before uninit is performed, but still.
Instead of making m_config a special-case, it more or less uses the
underlying m_config_cache/m_config_shadow APIs properly. This makes the
player core a (relatively) equivalent user of the core option API. In
particular, this means that other threads can change core options with
m_config_cache_write_opt() calls (before this commit, this merely led to
diverging option values).
An important change is that before this commit, mpctx->opts contained
the "master copy" of all option data. Now it's just another copy of the
option data, and the shadow copy is considered the master. This is why
whenever mpctx->opts is written, the change needs to be copied to the
master (thus why this commits add a bunch of m_config_notify... calls).
If another thread (e.g. a VO) changes an option, async_change_cb is now
invoked, which funnels the change notification through the player's
layers.
The new self_notification parameter on mp_option_change_callback is so
that m_config_notify... doesn't trigger recursion, and it's used in
cases where the change was already "processed". It's still needed to
trigger libmpv property updates. (I considered using an extra
m_config_cache for that, but it'd only cause problems with no
advantages.)
I think the recent changes actually forgot to send libmpv property
updates in some cases. This should fix this anyway. In some cases,
property updates are reworked, and the potential for bugs should be
lower (probably).
The primary point of this change is to allow external updates, for
example by a VO writing the fullscreen option if the window state is
changed by the window manager (rather than mpv changing it). This is not
used yet, but the following commits will.
Goes in line with the recent changes to always checking for option value
changes. The player core will use this to determine whether it should
send additional change events.
Just an implementation detail that can be cleaned up now. Internally,
m_config maintains a tree of m_sub_options structs, except for the root
it was not defined explicitly. GLOBAL_CONFIG was a hack to get access to
it anyway. Define it explicitly instead.
The original MPlayer m_config was essentially only responsible for
handling some command line parsing details, handling profiles, and
file-local options. And then there's the new mpv stuff (that stuff was
regretfully written by me), which is mostly associated with making
things thread-safe (includes things like making it all library-safe,
instead of stuffing all option data into global variables).
This commit tries to separate them some more. For example,
m_config_shadow (the thread-safe thing) now does not need access to
m_config anymore. m_config can hopefully be reduced to handling only the
"old" mplayer-derived mechanisms.
This will allow any other threads to write to the global option data in
a safe way.
The typical example for this is the fullscreen option, which needs to be
written by VO (or even some other thing running completely separate from
the main thread). We have a complicated and annoying contraption which
gets the value updated on the main thread, and this function will help
get rid of it.
As of this commit, this doesn't really work yet, because he main thread
uses its own weird copy of the option data.
This adds m_config_cache_get_next_changed() and the change_flags field
in m_config_cache. Both can be used to determine whether specific
options changed (rather than the entire sub-group).
Not sure if I'm very happy with that. The former rather compact
update_options() is now a bit of a mess, because it needs to be
incremental. m_config_cache_get_next_changed() will not be too nice to
use, and change_flags still relies on global "allocation" of change
flags (see UPDATE_* defines in m_option.h). If C weren't such a
primitive language that smells like grandpa, it would be nice to define
per-option change callbacks or so.
This compares options by value to determine whether they have changed.
This makes it slower in theory, but in practice it probably doesn't
matter (options are rarely changed after initialization). The
alternative would have been per-option change counters (wastes too much
memory; not a practical problem but too ugly), or keep all
m_config_caches in a global list and have bitmaps with per-option change
bits (sounds complicated). I guess the current way is OK.
Technically, this changes semantics slightly by ignoring setting an
option to the same value. Technically this wasn't a no-op, although the
effect was almost almost no-op. Some code would actually become cleaner
by ignoring such redundant change events, and them being no-op is
probably also what the user would normally assume.
Create a separate struct for internal fields of m_config_cache, so API
users can't just mess with stuff they shouldn't access.
Move the ts field out of m_config_data, so we don't need unnecessary
atomics in one case.
This is just preparation, and shouldn't change any behavior.
The exact type name (m_obj_list_t) was removed in 2013. I don't think
this stub comment helps much with understanding this complicated thing
anyway (this code is for the --vf/--af options, and makes up almost half
of m_option.c).
The previous bunch of commits made this unnecessary, so this should be
a purely internal change with no user impact.
This may or may not open the way to future improvements. Even if not,
at least the property/option interaction should now be much less buggy.
Until now, using a filter not in mpv's builtin filter list would assume
it's a libavfilter filter. If it wasn't, the option value was still
accepted, but creating the filter simply failed. But since this happens
after option parsing, so the result is confusing.
Improve this slightly by checking filter names. This will reject truly
unknown filters at option parsing time. Unfortunately, this still does
not check filter arguments. This would be much more complex, because
you'd have to create a dummy filter graph and allocate the filter. Maybe
another time.
This function is dangerous, because it disables the already basic/week
type checking the option system has at all. I'm tend towards thinking
that all of its uses should be replaced.
This is preparation to get rid of the option-to-property bridge
(mp_on_set_option). This is a pretty insane thing that redirects
accesses to options to properties. It was needed in the ever ongoing
transition from something to... something else.
A good example for the need of this bridge is applying profiles at
runtime. This obviously goes through the config parser, but should also
make all changes effective, for which traditionally the property layer
is used.
There isn't much left that needs this bridge. This commit changes a
bunch of options (which also have a property implementation) to use
option change notifications instead. Many of the properties are still
left, but perform unrelated functions like OSD formatting.
This should be mostly compatible. There may be some subtle behavior
changes. For example, "hwdec" and "record-file" do not check for changes
anymore before applying them, so writing the current value to them
suddenly does something, while it was ignored before.
DVB changes untested, but should work.
I often watch sporting events. On many occasions I get files with the
same filename for each session. For example, for F1 I might have the
following directory structure:
F1/
FP1.mkv
FP2.mkv
FP3.mkv
Qualification.mkv
Race.mkv
Since usually one simply watches one race after the other, I usually
just rsync the new event's files over the old ones, so, for example,
Race.mkv will be replaced from the file for the last event with the file
from the new event.
One problem with this is that I like to use --resume-playback for other
kinds of media, so I have it on by default. That works great for, say, a
movie, but doesn't work so well with this scheme, because you can
trivially forget to pass --no-resume-playback on the command line and
end up 2 hours in, watching spoilers as the race results scroll down the
screen :-)
This patch adds a new option, --resume-playback-check-mtime, which
validates that the file's mtime hasn't changed since the watch_later
configuration was saved. It does this by setting the watch_later
configuration to have the same mtime as the file after it is saved.
Switching back and forth between checking mtime and not checking mtime
works fine, as we only choose whether to compare based on it, but we
update the watch_later configuration mtime regardless of its value.
I have no idea why this still exists, since we have --input-ipc-server.
I think there was something about Windows, but the latter option is
implemented even on Windows.
Used to contain flags for "save" setting of options at runtime. Now
there is nothing special needed anymore and it's 0. So drop it
completely, and remove anything that distinguishes between runtime and
initialization time.
Options marked with this flag were changed to strictly read-only after
initialization (mpv_initialize() in the client API, after option parsing
and config file loading with the CLI player).
This used to be necessary, because there was a single option struct that
could be accessed by multiple threads. For example, --config-dir sets
MPOpts.force_configdir, which was read whenever anything accessed the
mpv config dir (which could be on different threads, e.g. font
initialization tries to lookup fonts.conf from an arbitrary thread).
This isn't needed anymore, because threads now access these in a thread
safe way. In the case of --config-dir, the path is actually just copied
on init.
This M_OPT_FIXED mechanism is thus not strictly needed anymore. It still
prevents writing to some options that cannot take effect at runtime, but
even that can be dropped. In general, all mpv options can be changed any
time at runtime, even if they never take effect, and there's no need to
make an exception for a very low number of options. So just get rid of
it.
Until now, each .c file in test/ was built as separate, self-contained
binary. Each binary could be run to execute the tests it contained.
Change this and make them part of the normal mpv binary. Now the tests
have to be invoked via the --unittest option. Do this for two reasons:
- Tests now run within a "properly" initialized mpv instance, so all
services are available.
- Possibly simplifying the situation for future build systems.
The first point is the main motivation. The mpv code is entangled with
mp_log and the option system. It feels like a bad idea to duplicate some
of the initialization of this just so you can call code using them.
I'm also getting rid of cmocka. There wouldn't be any problem to keep it
(it's a perfectly sane set of helpers), but NIH calls. I would have had
to aggregate all tests into a CMUnitTest list, and I don't see how I'd
get different types of entry points easily. Probably easily solvable,
but since we made only pretty basic use of this library, NIH-ing this is
actually easier (I needed a list of tests with custom metadata anyway,
so all what was left was reimplement the assert_* helpers).
Unit tests now don't output anything, and if they fail, they'll simply
crash and leave a message that typically requires inspecting the test
code to figure out what went wrong (and probably editing the test code
to get more information). I even merged the various test functions into
single ones. Sucks, but here you go.
chmap_sel.c is merged into chmap.c, because I didn't see the point of
this being separate. json.c drops the print_message() to go along with
the new silent-by-default idea, also there's a memory leak fix unrelated
to the rest of this commit.
The new code is enabled with --enable-tests (--enable-test goes away).
Due to waf's option parser, --enable-test still works, because it's a
unique prefix to --enable-tests.
In some corner cases (see #6802), it can be beneficial to use a larger
stream buffer size. Use this as argument to rewrite everything for no
reason.
Turn stream.c itself into a ring buffer, with configurable size. The
latter would have been easily achievable with minimal changes, and the
ring buffer is the hard part. There is no reason to have a ring buffer
at all, except possibly if ffmpeg don't fix their awful mp4 demuxer, and
some subtle issues with demux_mkv.c wanting to seek back by small
offsets (the latter was handled with small stream_peek() calls, which
are unneeded now).
In addition, this turns small forward seeks into reads (where data is
simply skipped). Before this commit, only stream_skip() did this (which
also mean that stream_skip() simply calls stream_seek() now).
Replace all stream_peek() calls with something else (usually
stream_read_peek()). The function was a problem, because it returned a
pointer to the internal buffer, which is now a ring buffer with
wrapping. The new function just copies the data into a buffer, and in
some cases requires callers to dynamically allocate memory. (The most
common case, demux_lavf.c, required a separate buffer allocation anyway
due to FFmpeg "idiosyncrasies".) This is the bulk of the demuxer_*
changes.
I'm not happy with this. There still isn't a good reason why there
should be a ring buffer, that is complex, and most of the time just
wastes half of the available memory. Maybe another rewrite soon.
It also contains bugs; you're an alpha tester now.
In 2017, we lowered this to debug level. But I think setting options is
important enough that it should be logged even in verbose, at least
compared to all the other dumb noise.
This might be reduced again if verbose logging becomes much cleaner.
Purpose uncertain. I guess it's slightly better, maybe.
The move of the sws/zimg options from VO opts (vo_opt_list) to the
top-level option list is tricky. VO opts have some helper code in vo.c,
that sends VOCTRL_SET_PANSCAN to the VO on every VO opts change. That's
because updating certain VO options used to be this way (and not just
the panscan option). This isn't needed anymore for sws/zimg options, so
explicitly move them away.
Internally, vo_gpu uses NaN for some options to indicate a default value
that is different depending on the context (e.g. different scalers).
There are 2 problems with this:
1. you couldn't reset the options to their defaults
2. NaN is a damn mess and shouldn't be part of the API
The option parser already rejected NaN explicitly, which is why 1.
didn't work. Regarding 2., JSON might be a good example, and actually
caused a bug report.
Fix this by mapping NaN to the special value "default". I think I'd
prefer other mechanisms (maybe just having every scaler expose separate
options?), but for now this will do. See you in a future commit, which
painfully deprecates this and replaces it with something else.
I refrained from using "no" (my favorite magic value for "unset" etc.)
because then I'd have e.g. make --no-scale-param1 work, which in
addition to a lot of effort looks dumb and nobody will use it.
Here's also an apology for the shitty added test script.
Fixes: #6691
This provides a very similar API to sws_utils.h, which can be used to
convert and scale from one mp_image to another.
This commit adds only the code, but does not use it anywhere.
The code is quite preliminary and barely tested. It supports only a few
pixel formats, and will return failure for many others. (Unlike
libswscale, which tries to support anything that FFmpeg knows.)
zimg itself accepts only planar formats. Supporting other formats
requires manual packing/unpacking. (Compared to libswscale, the zimg API
is generally lower level, but allows for more flexibility.) Only BGR0
output was actually tested. It appears to work.
The justification for this is the fact that the `video-aspect` property
doesn't work well with `cycle_values` commands that include the value
"-1".
The "video-aspect" property has effectively no change in behavior, but
we may want to make it read-only in the future. I think it's probably
fine to leave as-is, though.
Fixes#6068.
It seems using multiple prefixes for an option isn't supported out of
laziness (and shouldn't, because what the fuck). So assert() on this.
(Unfortunately this prefix nonsense is still needed. Especially AO and
VO options use this through the options_prefix field.)
