Add support for reading a byte range from a stream via
the `slice://` protocol.
Syntax is `slice://start[-end]@URL` where end is a maximum
(read until end or eof).
Size suffixes support in `m_option` is reused so they can
be used with start/end.
This can be very useful with e.g. large MPEGTS streams with
corruption or time-stamp jumps or other issues in them.
Signed-off-by: Mohammad AlSaleh <CE.Mohammad.AlSaleh@gmail.com>
Change it to strictly accept local paths only. No more http://, no more
$HOME expansion with "~/" or mpv config path expansion with "~~/". This
should behave as if passing a path directly to open().
Reduce annoying log noise to further facilitate it using as open()
replacement.
The header probing hacks were previously all broken. They only worked
the first time the archive file was open. Since subsequent opens (on
seek) occured in the middle of the source stream rather than at the
beginning, the stream_read_peek calls meant to retrieve the headers were
instead returning random bytes in the middle of the file.
Perhaps the worst manifestation of this was when seeking within a
multi-volume .rar archive with the "legacy" file naming pattern. If the
seek required a reopen, the fact that the archive was multi-volume would
be forgotten and the file would appear truncated terminating playback.
To solve this, only perform the header probling the first time the
archive is opened. Save the results and reuse them on subsequent
reopens. Put this in a wrapper so this is transparent to
demux_libarchive.
I couldn't find any reason for this message to be so far dispalced from
where it's necessity was determined. That necessity is not however in
question.
Also improve the wording and line breaking.
The call was hidden very well, via
dvb_streaming_read -> dvb_update_config
-> dvb_streaming_start -> dvb_set_channel,
and broke the stream buffering logic.
Dropping that call does not noticeably slow down channel switches.
The buffer can be larger than the normal size when "peeking" is used
(such as done with some file formats, where a large number of bytes masy
need to be "peeked" at the beginning, because FFmpeg). Once normal
operation resumes, it's supposed to free this buffer again. Apparently
this didn't happen as intended, because normal reading did have no way
to discard back buffer before/while resizing the buffer. There's only a
path for discarding the back buffer when actually reading.
It seems like this unfortunately needs 2 code paths for discarding old
data. Just put it into stream_resize_buffer(), where it's rather
non-tricky (discarding can be done by adjusting the copy offset when
moving data to the new allocation). The function now drops old data if
it doesn't fit into the allocation. The caller must ensure that the new
size is sufficient; the function signature changes only so the size of
the implicitly guaranteed kept part can be checked with assert().
Change all OPT_* macros such that they don't define the entire m_option
initializer, and instead expand only to a part of it, which sets certain
fields. This requires changing almost every option declaration, because
they all use these macros. A declaration now always starts with
{"name", ...
followed by designated initializers only (possibly wrapped in macros).
The OPT_* macros now initialize the .offset and .type fields only,
sometimes also .priv and others.
I think this change makes the option macros less tricky. The old code
had to stuff everything into macro arguments (and attempted to allow
setting arbitrary fields by letting the user pass designated
initializers in the vararg parts). Some of this was made messy due to
C99 and C11 not allowing 0-sized varargs with ',' removal. It's also
possible that this change is pointless, other than cosmetic preferences.
Not too happy about some things. For example, the OPT_CHOICE()
indentation I applied looks a bit ugly.
Much of this change was done with regex search&replace, but some places
required manual editing. In particular, code in "obscure" areas (which I
didn't include in compilation) might be broken now.
In wayland_common.c the author of some option declarations confused the
flags parameter with the default value (though the default value was
also properly set below). I fixed this with this change.
Before this commit, option declarations used M_OPT_MIN/M_OPT_MAX (and
some other identifiers based on these) to signal whether an option had
min/max values. Remove these flags, and make it use a range implicitly
on the condition if min<max is true.
This requires care in all cases when only M_OPT_MIN or M_OPT_MAX were
set (instead of both). Generally, the commit replaces all these
instances with using DBL_MAX/DBL_MIN for the "unset" part of the range.
This also happens to fix some cases where you could pass over-large
values to integer options, which were silently truncated, but now cause
an error.
This commit has some higher potential for regressions.
This was mostly unused, and has certain problems. Just get rid of it.
It was still used in CDDA (--cdda-span) and a debug option for OpenGL
(--opengl-check-pattern). Replace both of these with 2 options, where
each sets the start/end values of the former span. Both were
undocumented somehow (normally we require all options to be documented),
so I'm not caring about compatibility, and not bothering to add it to
the API changelog.
This required libsmbclient, which is a heavy dependency, and as a
library, has all kinds of problems. For one, the API requires completely
unacceptable global state (in particular, leaks auth state), and is not
thread-safe (meaning concurrent reads to multiple files block each
other).
There are better replacements: you can use the Linux kernel's builtin
CIFS support, fusesmb, or contribute supoport for libdsm.
It appears using lseek() to seek to the end and back to determine file
size is inefficient in some cases.
With CIFS, this restores the performance regression that happened when
the stream cache was removed (which called read() from a thread). This
is probably faster than the old code too, because it's the seeking that
was slowing down CIFS.
According to the user who tested this, the size caching does not help
with fstat() (although it did with the old method).
Fixes: #7408, #7152
Libav seems rather dead: no release for 2 years, no new git commits in
master for almost a year (with one exception ~6 months ago). From what I
can tell, some developers resigned themselves to the horrifying idea to
post patches to ffmpeg-devel instead, while the rest of the developers
went on to greener pastures.
Libav was a better project than FFmpeg. Unfortunately, FFmpeg won,
because it managed to keep the name and website. Libav was pushed more
and more into obscurity: while there was initially a big push for Libav,
FFmpeg just remained "in place" and visible for most people. FFmpeg was
slowly draining all manpower and energy from Libav. A big part of this
was that FFmpeg stole code from Libav (regular merges of the entire
Libav git tree), making it some sort of Frankenstein mirror of Libav,
think decaying zombie with additional legs ("features") nailed to it.
"Stealing" surely is the wrong word; I'm just aping the language that
some of the FFmpeg members used to use. All that is in the past now, I'm
probably the only person left who is annoyed by this, and with this
commit I'm putting this decade long problem finally to an end. I just
thought I'd express my annoyance about this fucking shitshow one last
time.
The most intrusive change in this commit is the resample filter, which
originally used libavresample. Since the FFmpeg developer refused to
enable libavresample by default for drama reasons, and the API was
slightly different, so the filter used some big preprocessor mess to
make it compatible to libswresample. All that falls away now. The
simplification to the build system is also significant.
stream_seek() might somewhat show up in the profiler, even if it's a
no-OP, because of the MP_TRACE() call. I find this annoying. Otherwise,
this should be of no consequence, and should not break or improve
anything.
Some cache logic in demux.c queries the raw byte stream size on every
packet read. This is because it reports the value to the user. (It has
to be polled like this because there is no change notification in most
underlying I/O APIs, and also the user can't just block on the demuxer
thread to update it explicitly.)
This causes a very high number of get_size calls with low packet sizes,
so cache the size, and update it on every read. Reads only happen
approximately all 64KB read with default settings, which is way less
frequent than every packet in such extreme cases.
In theory, this could in theory cause problems in some cases. Actually
this is whole commit complete non-sense, because why micro-optimize for
broken cases like patent troll codecs. I don't need to justify it
anyway.
As a minor detail, off_t is actually specified as signed, so the off_t
cast is never needed.
Unfortunately, libarchive detects a stream of 0s as tar, as demonstrated
by "mpv /dev/zero". This is inconvenient in some cases.
One example is the .cue demuxer trying to open a raw audio .bin file,
which it allows only if probing fails (as .bin is raw and normally will
not look like any real file format). Although this use-case is
worthless.
The cdio API always reads in sectors (fixed CDIO_CD_FRAMESIZE_RAW
blocks). In the past, mpv/MPlayer streams had a way for a stream to
signal a sector size, so the stream's fill_buffer implementation could
ignore the length argument. Later, that was removed, but stream_cdda.c
was left with assuming that the read size was always larger than the
sector size (rightfully at the time). Even later, this assumption was
broken with commit f37f4de, when it was suddenly possibly that smaller
reads were performed (at ring buffer boundaries). It returned EOF if the
buffer size was too small, so playback stopped very early.
Fix this by explicitly handling arbitrary sizes.
Tested with a .cue/.bin file only.
Fixes: #7384
This reverts commit 1b0129c414.
It turns out most of the files affected by the idiotic use-case actually
use this old naming pattern, which I hoped was unused.
This means for now we'll always assume .rar files are multi-part (until
proven otherwise), but the following commit tries to fix this.
Seems like I'm still not done with rar playback stuff...
It turns out the reason for archive_read_open1() opening all volumes had
nothing to do with libarchive's rar code, but was a consequence of how
multi volume support is implemented in libarchive, and due to the fact
that we enabled archive_read_support_format_zip_seekable() (through
archive_read_support_format_zip()).
The seekable zip format will seek to the end of the file and search for
a zip "header" there. It could possibly be considered a libarchive bug
that it does that even if it's fairly sure that it's a RAR file.
We already do probing on a small buffer read from the start of the file
(i.e. not giving libarchive a way to seek the stream before we think
it's an archive), but that does not help, since libarchive needs to
probe _again_. libarchive does not seem to provide a function to query
the format (no archive_read_get_format()). Which seems quite strange,
but at least I didn't find one.
This commit works this around by doing some manual rar/zip probing. We
could have gone only with rar probing. But detecting zip separately
allows us to avoid that stream_libarchive seeks to the end during early
probing. This is an additional bonus on top of "fixing" multi volume
rar.
The zip probing is from archive_read_format_zip_streamable_bid(). The
rar signature is the common prefix of the rar and rar5 formats in
libarchive (presumably the RAR fixed header parts without version).
If the demuxer seeks to the end of the rar entry, this will still open
all volumes; I'm not sure whether the old/removed rar code in mpv could
handle this better.
See: #7182
Well that was too much misery when trying to deal with an idiotic
feature, so it had to be compensated for.
Replace insults with proper explanation, libarchive sort of isn't guilty
in the first place, and their format support is pretty good all things
considered.
This turned every "normal" .rar filename into a multi-volume one
accidentally. Since the detection is purely by filename (due to lack of
support by libarchive I guess), it causes the nasty message added in the
previous commit to appear for every .rar file. Just drop it.
See manpage additions. The libarchive behavior mentioned in the last
paragraph there is technically unrelated, but makes this new option
mostly pointless.
See: #7182
Instead of opening every volume on start just to see if it's there, all
all volumes that could possibly exist, and "handle" it on opening. This
requires working around some of libarchive's amazing stupidity and using
some empirically determined behavior. Will possibly break if libarchive
changes some of this behavior.
See: #7182
We whitelist formats (and not all of them). RAR v5 is a separated format
entry for inexplicable reasons. (It's a separate implementation, but who
really wants to support only either of the rar formats?)
I'm not sure if it was libarchive 3.3.3. Their git history is absolutely
chaotic. These people do not know how to use git. I couldn't be bothered
to dig deeper.
Make concat streams use the "worst" origin of its parts, which may or
may not be what makes sense. stream_memory has no natural way to do
this, so just add a vague comment.
mpv has a very weak and very annoying policy that determines whether a
playlist should be used or not. For example, if you play a remote
playlist, you usually don't want it to be able to read local filesystem
entries. (Although for a media player the impact is small I guess.)
It's weak and annoying as in that it does not prevent certain cases
which could be interpreted as bad in some cases, such as allowing
playlists on the local filesystem to reference remote URLs. It probably
barely makes sense, but we just want to exclude some other "definitely
not a good idea" things, all while playlists generally just work, so
whatever.
The policy is:
- from the command line anything is played
- local playlists can reference anything except "unsafe" streams
("unsafe" means special stream inputs like libavfilter graphs)
- remote playlists can reference only remote URLs
- things like "memory://" and archives are "transparent" to this
This commit does... something. It replaces the weird stream flags with a
slightly clearer "origin" value, which is now consequently passed down
and used everywhere. It fixes some deviations from the described policy.
I wanted to force archives to reference only content within them, but
this would probably have been more complicated (or required different
abstractions), and I'm too lazy to figure it out, so archives are now
"transparent" (playlists within archives behave the same outside).
There may be a lot of bugs in this.
This is unfortunately a very noisy commit because:
- every stream open call now needs to pass the origin
- so does every demuxer open call (=> params param. gets mandatory)
- most stream were changed to provide the "origin" value
- the origin value needed to be passed along in a lot of places
- I was too lazy to split the commit
Fixes: #7274
This has the advantage that playlists within the archive will work as
expected, because demux_playlist will correctly join the archive base
URL and entry name. Before this change, it could skip before the "|",
resulting in a broken URL.
This warning seems to be designed well. It doesn't seem to warn on
fallthrough-only case statements, so it's compatible to well written
code.
stream_dvdnav.c had an obscure bug in inactive code, fix it.
stream_dvb.c is the only place where it intentionally falls through, I
guess I'll just leave it alone.
This is preparation to get rid of the option-to-property bridge
(mp_on_set_option). This is a pretty insane thing that redirects
accesses to options to properties. It was needed in the ever ongoing
transition from something to... something else.
A good example for the need of this bridge is applying profiles at
runtime. This obviously goes through the config parser, but should also
make all changes effective, for which traditionally the property layer
is used.
There isn't much left that needs this bridge. This commit changes a
bunch of options (which also have a property implementation) to use
option change notifications instead. Many of the properties are still
left, but perform unrelated functions like OSD formatting.
This should be mostly compatible. There may be some subtle behavior
changes. For example, "hwdec" and "record-file" do not check for changes
anymore before applying them, so writing the current value to them
suddenly does something, while it was ignored before.
DVB changes untested, but should work.
Until now, we've made FFmpeg use the default network timeout - which is
apparently infinite. I don't know if this was changed at some point,
although it seems likely, as I was sure there was a more useful default.
For most use cases, a smaller timeout is more useful (for example
recording something in the background), so force a timeout of 1 minute.
See: #5793
stream_skip() semantics were kind of bad, especially after the recent
change to the stream code. Forward stream_skip() calls could still
trigger a seek and fail, even if it was supposed to actually skip data.
(Maybe the idea that stream_skip() should try to seek is worthless in
the first place.)
Rename it to stream_seek_skip() (takes absolute position now because I
think that's better), and make it always skip if the stream is marked as
forward.
While we're at it, make EOF detection more robust. I guess s->eof
shouldn't exist at all, since it's valid only "sometimes". It should be
removed... but not today. A 1-byte stream_read_peek() call is good to
get the s->eof flag set to a correct value.
It was set, but its value was never used. The stream cache used to use
it, but it was removed. It controlled how much data it tried to read
from the underlying stream at once.
The user can now control the buffer size with --stream-buffer-size,
which achieves a similar effect, because the stream will in the common
case read half of the buffer size at once. In fact, the new default size
is 128KB, i.e. 64KB read size, which is as much as stream_file and
stream_cb requested by default. stream_memory requested more, but it
doesn't matter anyway. Only stream_smb set a larger size with 128KB.
The dvdnav API reads in 2K blocks (dvdnav_get_next_block()). The mpv
wrapper (fill_buffer() in this file) expects that the read size done by
the mpv core is at least 2K for this reason. If not, it returns an
error.
This used to be OK, because there was a thing called section alignment
in the core code. This was removed because the core shouldn't suffer
from optical disc idiosyncrasies. Which means that ever since, it has
been working only by coincidence, or maybe not at all.
Fixing this would require keeping a buffer in the priv struct, and
returning it piece by piece if the core makes smaller reads. I have no
intention of writing such code, so add an error message asking for a
patch. If anyone actually cares about DVD, maybe it'll get fixed.
This isn't really needed, since it doesn't support byte seeking (only
for avoiding that demux_disc fucks up even more if the nested demux_lavf
tries to seek in the TS).
stream_read_peek() duplicated what stream_read_more() checks for anyway
(whether the forward buffer is large enough). This can be skipped by
making the stream_read_more() return value more consistent.
demux_mkv was the only thing using this, and everything else accessed it
directly. No need to keep the indirection wrapper around.
(Funny how this getter was in the initial commit of MPlayer.)
(Only half of the buffer is actually used in a useful way, see manpage
or commit which added the option.)
Might have some advantages with broken network filesystem drivers.
See: #6802
Was probably worthless, and I can't measure a difference anymore (I used
to be able and it still seemed worth doing so back then).
When the default buffer size is enlarged in the next commit, the inline
buffer probably won't even be useful in theory, because the data will
rarely be on the same page as the other stream fields. It surely makes
the inline buffer seem like a ridiculous micro-optimization. Farewell...
In some corner cases (see #6802), it can be beneficial to use a larger
stream buffer size. Use this as argument to rewrite everything for no
reason.
Turn stream.c itself into a ring buffer, with configurable size. The
latter would have been easily achievable with minimal changes, and the
ring buffer is the hard part. There is no reason to have a ring buffer
at all, except possibly if ffmpeg don't fix their awful mp4 demuxer, and
some subtle issues with demux_mkv.c wanting to seek back by small
offsets (the latter was handled with small stream_peek() calls, which
are unneeded now).
In addition, this turns small forward seeks into reads (where data is
simply skipped). Before this commit, only stream_skip() did this (which
also mean that stream_skip() simply calls stream_seek() now).
Replace all stream_peek() calls with something else (usually
stream_read_peek()). The function was a problem, because it returned a
pointer to the internal buffer, which is now a ring buffer with
wrapping. The new function just copies the data into a buffer, and in
some cases requires callers to dynamically allocate memory. (The most
common case, demux_lavf.c, required a separate buffer allocation anyway
due to FFmpeg "idiosyncrasies".) This is the bulk of the demuxer_*
changes.
I'm not happy with this. There still isn't a good reason why there
should be a ring buffer, that is complex, and most of the time just
wastes half of the available memory. Maybe another rewrite soon.
It also contains bugs; you're an alpha tester now.
This partially reverts commit a9d83eac40
("Remove optical disc fancification layers").
Mostly due to the timestamp crap, this was never really going to work.
The playback layer is sensitive to timestamps, and derives the playback
time directly from the low level packet timestamps. DVD/BD works
differently, and libdvdnav/libbluray do not make it easy at all to
compensate for this. Which is why it never worked well, but not doing it
at all is even more awful.
demux_disc.c tried this and rewrote packet timestamps from low level TS
to playback time. So restore demux_disc.c, which should bring behavior
back to the old often non-working but slightly better state.
I did not revert anything that affects components above the demuxer
layer. For example, the properties for switching DVD angles or listing
disc titles are still gone. (Disc titles could be reimplemented as
editions. But not by me.)
This commit modifies the reverted code a bit; this can't be avoided,
because the internal API changed quite a bit. The old seek resync in
demux_lavf.c (which was a hack) is replaced with a hack. SEEK_FORCE and
demux_params.external_stream are new additions.
Some of this could/should be further cleaned up. If you don't want
"proper" DVD/BD support to disappear, you should probably volunteer.
Now why am I wasting my time for this? Just because some idiot users are
too lazy to rip their ever-wearing out shitty physical discs? Then why
should I not be lazy and drop support completely? They won't even be
thankful for me maintaining this horrible garbage for no compensation.
This is realized by dvbin-channel-switch-offset,
which is a numeric offset on the channel initially tuned to.
Since the channel list is kept in the stream alone
depending on detected hardware and chosen card,
and no available backchannel to the player, there's no direct
property which could be switched.
Using input.conf like:
H cycle dvbin-channel-switch-offset up
K cycle dvbin-channel-switch-offset down
Q set dvbin-prog "ZDF HD"
allow fast and reliable channel switching again.
If any parameters have been updated, reinitiate streaming_start.
Throttle checks since we poll from streaming_read.
This also requires the player to re-initialize, since all video
and audio streams and even the transport format may change.
This is added in the next commit.
This is now treated in dvb_parse_path consistently
instead of logic scattered over various functions.
This is a requirement to sensibly re-evaluate config
after options have been changed, since we have two ways
to configure the stream (decorated URI and config parameters).
Add yet another variant of the stream open function. This time, make it
so that it's possible to add new open parameters in an extendable way,
which should put an end to having to change this every other year.
Effectively get rid of the overly special stream_create_instance()
function and use the new one instead, which requires changes in
stream_concat.c and stream_memory.c. The function is still in private in
stream.c, but I preferred to make the mentioned users go through the new
function for orthogonality. The error handling (mostly logging) was
adjusted accordingly.
This should not have any functional changes. (To preempt any excuses, I
didn't actually test stream_concat and stream_memory.)
This allows stream_cb backends to implement blocking
behavior inside read_fn, and still get notified when the user
wants to cancel and stop playback.
Signed-off-by: Aman Gupta <aman@tmm1.net>
(At first I left this intentionally, because the temporarily disabled
stream ctrl code used it, but there's actually no reason to annoy
everyone with the warning.)
Instead of having to rely on the protocol matching, make a function that
creates a stream from a stream_info_t directly. Instead of going through
a weird indirection with STREAM_CTRL, add a direct argument for non-text
arguments to the open callback. Instead of creating a weird dummy
mpv_global, just pass an existing one from all callers. (The latter one
is just an artifact from the past, where mpv_global wasn't available
everywhere.)
Actually I just wanted a function that creates a stream without any of
that bullshit. This goal was slightly missed, since you still need this
heavy "constructor" just to setup a shitty struct with some shitty
callbacks.
struct stream used to include the stream buffer, including peek buffer,
inline in the struct. It could not be resized, which means the maximum
peek size was set in stone. This meant demux_lavf.c could peek only so
much data.
Change it to use a dynamic buffer. Because it's possible, keep the
inline buffer for default buffer sizes (which are basically always used
outside of file opening). It's unknown whether it really helps with
anything. Probably not.
This is also the fallback plan in case we need something like the old
stream cache in order to deal with mp4 + unseekable http: the code can
now be easily changed to use any buffer size.
Apparently this was so that when playing a video file from a .rar file,
it would load external subtitles with the same name (instead of looking
for mpv's rar:// mangled URL). This was requested on github almost 5
years ago. Seems like a weird feature, and I don't care. Drop it,
because it complicates some in progress change.
libarchive (sometimes affectionately called libcve) has this annoying
behavior that if after a "fatal" error, you do any operation on the
archive context other than querying the error and closing the context,
you get a free CVE. So we close the archive context in these situations.
This can set p->mpa to NULL, so code accessing this field needs to be
careful.
This was not considered in a certain code path, and a simple truncated
.rar file made it crash. Part of the problem was that the file inside
the rar was a mkv file, which triggered seeking when the demux_mkv
resync code encountered bogus data.
This is probably a regression from a relatively recent change to this
code (in any case mpv 0.29.1 doesn't crash).
Fix this by adding the check.
There's also a mechanism to reopen an archive context used to emulate
seeking, since most libarchive format handlers don't support this
natively. Add a reopen call to the codepath, because obviously it should
always be possible to seek back into a "working" area of the file.
There is a second bug with this: if reopening fails, we don't adjust the
current position back to 0, which in some cases means we accidentally
return bogus data to the reader when we shouldn't. Fix this by always
resetting the position on reopening.
The intent of the line above the modified one code was raising the
amount of read data, so that many stream_peek() calls with small len
values would not degrade performance by effectively turning every
stream_peak() into an unbuffered read call to the stream implementation.
So this confusing looking MPMAX() was correct, but "chunk" could still
get beyond the buffer.
So just fix that and limit "chunk" correctly.
I'm not sure whether the commit referenced below accidentally removed
some intricate guarantee that this couldn't happen, since the code was
around since 2013. It could have relied on TOTAL_BUFFER_SIZE >
STREAM_BUFFER_SIZE. But not sure. I've rewritten all this code in my own
branch a year ago, so who knows.
Fixes: 162e0f5ad9Fixes: #6948
The write functionality is almost unused (only encoding 2-pass mode uses
it to write the log file). Moreover, it almost makes no sense to use
this in a not local scenario. This change is just to prevent people from
duplicating the short write logic across all streams that happen to
support writing. Mostly untested; local log file writing still works.
Linux analog TV support (via tv://) was excessively complex, and
whenever I attempted to use it (cameras or loopback devices), it didn't
work well, or would have required some major work to update it. It's
very much stuck in the analog past (my favorite are the frequency tables
in frequencies.c for analog TV channels which don't exist anymore).
Especially cameras and such work fine with libavdevice and better than
tv://, for example:
mpv av://v4l2:/dev/video0
(adding --profile=low-latency --untimed even makes it mostly realtime)
Adding a new input layer that targets such "modern" uses would be
acceptable, if anyone is interested in it. The old TV code is just too
focused on actual analog TV.
DVB is rather obscure, but has an active maintainer, so don't remove it.
However, the demux/stream ctrl layer must go, so remove controls for
channel switching. Most of these could be reimplemented by using the
normal method for option runtime changes.
This was possibly needed by libdvdread, and/or old CD drivers on some
system. It still works with on-filesystem DVD and BD test images, so
this can go.
This removes anything related to DVD/BD/CD that negatively affected the
core code. It includes trying to rewrite timestamps (since DVDs and
Blurays do not set packet stream timestamps to playback time, and can
even have resets mid-stream), export of chapters, stream languages,
export of title/track lists, and all that.
Only basic seeking is supported. It is very much possible that seeking
completely fails on some discs (on some parts of the timeline), because
timestamp rewriting was removed.
Note that I don't give a shit about optical media. If you want to watch
them, rip them. Keeping some bare support for DVD/BD is the most I'm
going to do to appease the type of lazy, obnoxious users who will care.
There are other players which are better at optical discs.
stream_dvd.c contained large amounts of ancient, unmaintained code,
which has been historically moved to libdvdnav. Basically, it's full of
low level parsing of DVD on-disc structures.
Kill it for good. Users can use the remaining dvdnav support (which
basically operates in non-menu mode). Users have reported that
libdvdread sometimes works better, but this is just libdvdnav's problem
and not ours.
While they accept the frequency field with MHz for DVB-S,
for DVB-C and DVB-T, it may be in Hz, kHz or MHz.
The official rule is to multiply whatever is in the channels.conf
by 1000 until a value > 1000000 is reached to get correct units for tuning.
Manual changes done:
* Merged the interface-changes under the already master'd changes.
* Moved the hwdec-related option changes to video/decode/vd_lavc.c.
Seems to happen often with ytdl pseudo-DASH streams, so whatever. I
couldn't reproduce it and check what triggers it, I just remember seeing
the error message and found it annoying.
