New releases of VDPAU support decoding 4:4:4 content, and that comes
back as NV24 when using 'direct mode' in OpenGL Interop. That means we
need to be a little bit smarter about how we set up the OpenGL
textures.
If the compositor sends a configure event before the surface is initially
mapped, resize gets called before the egl_window gets created, resulting
in a crash in wl_egl_window_resize.
This was fixed back in 618361c697, but was reintroduced when the wayland
code was rewritten in 68f9ee7e0b.
While `ra` supports the concept of a texture as a storage
destination, it does not support the concept of a texture format
being usable for a storage texture. This can lead to us attempting
to create a texture from an incompatible format, with undefined
results.
So, let's introduce an explicit format flag for storage and use
it. In `ra_pl` we can simply reflect the `storable` flag. For
GL and D3D, we'll need to write some new code to do the compatibility
checks. I'm not going to do it here because it's not a regression;
we were already implicitly assuming all formats were storable.
Fixes#6657
Obvious mistake. This reported 44 bytes more data than what was
available. Could cause out of bounds reads. Security researchers would
claim a major victory if they found something like this in more popular
software, and would create a website for it.
Support for Ada and Objective-C was removed from MSYS2, which made
pacman refuse to update GCC while the gcc-ada and gcc-objc packages were
installed. Remove those packages before updating the others. Also remove
ANGLE, which has been removed from MSYS2, and add libplacebo, which is
now needed for the Vulkan VO.
This started as a desperate attempt to lower the memory requirement
of error diffusion, but later it turns out that this change also
improved the rendering performance a lot (by 40% as I tested).
Errors was stored in three uint before this change, each with 24bit
precision. This change encoded them into a single uint, each with 8bit
precision. This reduced the shared memory usage, as well as number of
atomic operations, all by three times.
Before this change, with the minimum required 32kb shared memory, only
the `simple` kernel can be used to render 1080p video, which is mostly
useless compare to `--dither=fruit`. After this change, 32kb can
handle `burkes` kernel for 1080p, or `sierra-lite` for 4K resolution.
error diffusion requires two texture rendering pass. The existing code
reuses `screen_tex` and creates another for such purpose. This works
generally well for opengl, but could potentially be problematic for
vulkan, due to its async natural.
This is a straightforward parallel implementation of error diffusion
algorithms in compute shader. Basically we use single work group with
maximal possible size to process the whole image. After a shift
mapping we are able to process all pixels column by column.
A large ring buffer are allocated in shared memory to speed things up.
However the size of required shared memory depends linearly on the
height of video window (or screen height in fullscreen mode). In case
there is no enough shared memory, it will fallback to `--dither=fruit`.
The maximal allowed work group size is hardcoded as 1024. Ideally we
could query `GL_MAX_COMPUTE_WORK_GROUP_INVOCATIONS`. But for whatever
reason, it seems most high end card from nvidia and amd support only
the minimal required value, so I guess we can stick to it for now.
When the D3D11 backend was first written, SPIRV-Cross only had a C++ API
and no guarantee of API or ABI stability, so instead of using
SPIRV-Cross directly, mpv used an unofficial C wrapper called crossc.
Now that KhronosGroup/SPIRV-Cross#611 is resolved, SPIRV-Cross has an
official C API that can be used instead, so remove crossc and use
SPIRV-Cross directly.
The calculation of scale factor involves 32-bit float, and a strict
equality test will effectively ignore `--scaler-resizes-only` option
for some non-integer scale factor.
Fix this by using non-strict equality check.
since the none native fs is a special legacy case it needs a special
quit routine. it indefinitely waited for an exit fs screen event to
shutdown properly, though that event only fires for the native fs.
now we check if we really are using a native fullscreen and if not
shutdown immediately.
Fixes#6704
These were unnecessary for a couple of reasons, but it seems like the
old code went through a lot of effort to avoid duplicating the code to
print a RECT, even though the windowrc gets printed anyway at the end of
the function.
Avoid printing the same windowrc twice by only printing it when it gets
changed (in the w32->current_fs branch.)
I assume (but cannot confirm) that VA-AP-API is in fact a typo, because
most if not all search engine results related to it are from mpv's manual
page.
By changing this to VA-API and clarifying that this requires VA-API support
on a system to use it, we can hopefully make it clear to unsuspecting
Windows users that this is not the filter they're looking for.
Concerns #6690.
This allows to select the drm mode using a string specification. You
can either select the the preferred mode, the mode with the highest
resolution, by specifying WxH[@R] or by its index in the list of modes
as before.
This was implemented by using OPT_STRING_VALIDATE for drm-mode,
instead of OPT_INT. Using a string here also prepares for future
additions to drm-mode that aim to allow specifying a mode by its
resolution.
It is useful when debugging to be able to force atomic off, or as a
workaround if atomic breaks for some user. Legacy modesetting is less
likely to break by virtue of being a less complex API.
The amount of code now present that's specific to Vulkan or OpenGL
has reached the point where we really want to split it out to
avoid a mess of #ifdefs.
At the same time, I'm moving the code to an api neutral location.
the force unwrapping of optionals caused many unpredictable segfaults
instead of gracefully exiting or falling back. besides that, it is bad
practice and the code is a lot more stable now.
This change updates the vulkan interop code to work with the
libplacebo based ra_vk, but also introduces direct VkImage
sharing to avoid the use of the intermediate buffer.
It is also necessary and desirable to introduce explicit
semaphore bsed synchronisation for operations on the shared
images.
Synchronisation means we can safely reuse the same VkImage for every
mapped frame, by ensuring the frame is copied to the VkImage before
mapping the next frame.
This functionality requires a 417.xx or newer nvidia driver, due to
bugs in the VkImage interop in the earlier 411 and 415 drivers.
It's definitely worth the effort, as the raw throughput is about
twice that of implementation using an intermediate buffer.
When interacting directly with libplacebo, we may need to pass a
pl_fmt based on an ra_format. Although the mapping is currently
trivial, it's worth wrapping to make it easy to adapt if this
changes in the future.
This commit rips out the entire mpv vulkan implementation in favor of
exposing lightweight wrappers on top of libplacebo instead, which
provides much of the same except in a more up-to-date and polished form.
This (finally) unifies the code base between mpv and libplacebo, which
is something I've been hoping to do for a long time.
Note: The ra_pl wrappers are abstract enough from the actual libplacebo
device type that we can in theory re-use them for other devices like
d3d11 or even opengl in the future, so I moved them to a separate
directory for the time being. However, the rest of the code is still
vulkan-specific, so I've kept the "vulkan" naming and file paths, rather
than introducing a new `--gpu-api` type. (Which would have been ended up
with significantly more code duplicaiton)
Plus, the code and functionality is similar enough that for most users
this should just be a straight-up drop-in replacement.
Note: This commit excludes some changes; specifically, the updates to
context_win and hwdec_cuda are deferred to separate commits for
authorship reasons.
This helps with compatibility and/or performance in particular for
oddly-sized formats like rgb24. We use a loop to avoid having to
calculate the lcm (or waste bytes in the extremely common case of the
byte size and the stride align having shared factors).
Shaderc comes with a Python script that automatically fetches
"known-good" versions of its dependencies. Use that instead of manually
cloning dependencies to third-party.
half of the materials we used were deprecated with macOS 10.14, broken
and not supported by run time changes of the macOS theme. furthermore
our styling names were completely inconsistent with the actually look
since macOS 10.14, eg ultradark got a lot brighter and couldn't be
considered ultradark anymore.
i decided to drop the old option --macos-title-bar-style and rework
the whole mechanism to allow more freedom. now materials and appearance
can be set separately. even if apple changes the look or semantics in
the future the new options can be easily adapted.
setting the appearance of the window to nil will always use the system
setting and changes on run time switches too. this is only the case for
macOS 10.14.
quite a lot of the title bar functionality and logic was within our
window. since we recently added a custom title bar class to our window
i decided to move all that functionality into that class and in its
own file.
this is also a preparation for the next commits.
Philip Langdale
Michael Forney
Philip Langdale
wm4
James Ross-Gowan
Bin Jin
Martin Herkt
Philip Sequeira
Niklas Haas
dudemanguy
der richter
Nicolas F
Anton Kindestam
Jan Ekström
JCount
john
Aman Gupta
NoSuck