PresentNotifyMSC turns out to be not only redundant, but also harmful with
mesa-backed egl/glx/vulkan VOs because for all of them, mesa uses
PresentPixmap behind the scenes when DRI3 is available, which already
spawns a PresentCompleteNotify event when the buffer swap actually
finishes. This is important because without using the timing information
from these PresentCompleteKindPixmap events, there's no way for mpv to know
exactly when a frame becomes visible on the display.
By using PresentNotifyMSC in conjunction with DRI3-enabled mesa, two
problems are created:
1. mpv assumes that a vblank won't elapse (i.e., it assumes the current MSC
won't change) between the time when mesa enqueues the buffer swap and
the time when mpv calls PresentNotifyMSC to ask xorg for a notification
at the next MSC, relative to the current MSC at the time that xorg reads
it for the PresentNotifyMSC call. This means that mpv could get a
notification one or more vblanks later than it expects, since the
intention here is for mpv to get a notification at the MSC that the
buffer swap completes.
2. mpv assumes that a buffer swap always takes one vblank to complete,
which isn't always true. A buffer swap (i.e., a page flip) could take
longer than that depending on hardware conditions (if the GPU is running
slowly or needs to exit a low-power state), scheduling delays (under
heavy system or GPU load), or unfortunate timing (if the raster scan
line happens to be at one of the last few rows of pixels and a vblank
elapses just before the buffer swap is enqueued).
This causes mpv to have a faulty assumption of when frames become visible.
Since mpv already receives the PresentCompleteNotify events generated by
mesa's buffer swaps under the hood, the PresentNotifyMSC usage is unneeded
and just throws a wrench in mpv's vsync timing when xpresent is enabled.
Simply removing the PresentNotifyMSC usage from the egl, glx, and vulkan
VOs fixes the xpresent vsync timing.
For OpenGL, this is based on simply comparing GL_VENDOR strings against
a list of allowed vendors.
Co-authored-by: Nicolas F. <ovdev@fratti.ch>
Co-authored-by: Niklas Haas <git@haasn.dev>
--vd-lavc-dr defaulted to "yes", which caused issues on certain
hardware. Instead of disabling it, add a new "auto" value and
make it the default.
The "auto" choice will enable DR only when we can request host-cached
buffers (as signalled by the new VO_DR_FLAG_HOST_CACHED).
Co-authored-by: Nicolas F. <ovdev@fratti.ch>
Co-authored-by: Niklas Haas <git@haasn.dev>
Officially, the most cursed part of the wayland code in mpv (third or
fourth try now?) This time, let's allocate a pool during init
(arbitrarily set to the maximum swapchain length mpv allows, 8; don't
even know if this actually works in wayland). Then we add/remove
feedbacks from the pool during the lifecycle of the VO, and clean it up
all at the end. Hopefully, this does the trick for good this time.
vk->surface is a handle and not a pointer, so assign VK_NULL_HANDLE.
This fixes the following build error on 32bit Windows when using clang for example,
which errors out when assigning a 32bit pointer to a 64bit integer:
../mpv-0.35.0/video/out/vulkan/utils.c:37:21:
error: incompatible pointer to integer conversion assigning to 'VkSurfaceKHR' (aka 'unsigned long long') from 'void *' [-Wint-conversion]
vk->surface = NULL;
^ ~~~~
Without this change the same track encoded as Opus - which requires R128
tagging - and e.g. Vorbis with ReplayGain tagging have different volumes.
This is caused by ReplayGain 2 having a higher reference level of -18 dB
LUFS, while EBU R128 has a lower reference level of -23 dB LUFS.
For the results of gain application to match, the read EBU R128
values need to be boosted according to the difference in reference
levels.
Patch inspired by mpd's source code.
In the event of a failed wayland initalization, the display_fd is
actually 0 instead of -1 which would correctly indicate it doesn't
exist. Also move the fd check inside vo_wayland_dispatch_events since
that function shouldn't ever do anything if we don't actually have a
display fd.
e97819f88e corrected a special case
condition that lead to an out of bounds access if the total width
happened to be an integer multiple of SLICE_W (256) which could cause a
crash in software VOs. However, it turns out that the functions in this
file evaluate quite differently when using encoding mode (and presumably
libmpv as well according to reports although I could not independently
verify it).
The logic here gets complicated but what ends up happening is that, in
blend_overlay_with_video, the value of x + w can be greater than p->w in
certain cases in encoding mode. The x is the positional value of the
slice which remained unchanged from before, but w can take the full
value of SLICE_W (256) which is not necessarily correct. The width of
the final slice here should be the total remaining width. We can handle
this in mark_rect by simply always adjusting x1 of the last slice to be
equal to total width - SLICE_W * x so it can never extend beyond where
it should be. In practice, this value should be the maximum allowed
here. I'm not sure if the existing x1 value can possibly already be
lower than SLICE_W, but just MPMIN it to be on the safe side.
Fixes#10908.
[motivation]
Seeking on MacOS appears to be lagged when users connect
to wireless audio output (airpods for example).
This commit attempts to fixmpv-player/mpv#10270
[observation]
1. When using other media player (VLC to be exact) simultaneously,
the lagging on seek disappear. We could guess that the AudioDevice
is on some sort of "warm-up" state.
See mpv-player/mpv#9243 for detailed description.
2. `AudioOutputUnitStart` takes significant longer time after each seek
or pause/play when using wireless output devices compares to wired devices.
[rationale]
After investigate codes in ao_coreaudio.c, it appears that the the `stop`
function was used as `ao_driver.reset` function. Therefore every seek
and pause would call `AudioOutputUnitStop`.
It turns out that `ao_driver.reset` function is used in `ao_reset`.
And `ao_reset` function is used to clean up the state of current `ao`
so I think `AudioUnitReset` is more proper than `AudioOutputUnitStop`
under this semantics.
Since ao_coreaudio use pull base mechanism, audio playback behaviors
upon pause/seek could be handled by callback function
(streaming silence when paused) so there is no need to stop AudioUnit when resetting.
Therefore using `AudioUnitReset` as `ao_driver.reset` looks proper.
Additionally, after using proper reset, the AudioUnit that represents
hardware I/O devices doesn't need to be restart everytime seek/pause actions happen.
Restarting wireless devices simply takes longer in MacOS which is
the root cause of lagging observed by users when they seek or pause/play media.
[method]
Use `AudioUnitReset` for ao_driver.reset.
This change enables mpv to work in the WSL2 (WSLg) environment where
OpenGL is implemented on top of D3D12.
This reverts commit 149d98d244.
Mentioned OpenGL implementation (GDI Generic) in the original change
will be rejected by version check, so there is no need to handle it
manually.
Signed-off-by: Kacper Michajłow <kasper93@gmail.com>
We ask users to freely share log files with us, which is usually
okay, unless a user has some unrelated and potentially embarrassing
files in their working directory. These would show up in the debug
level message output that --log-file enables.
Change the listing of potential external files to trace log level,
to save the users and the developers the embarrassment.
8300830951 rearranged/simplified some of
the wayland touch code mainly because what was there before was
completely broken on my machine in those days (dragging was unreliable,
resizing was really buggy, etc.). However, one user said that touch
input no longer worked for him after that change. I could not ever
reproduce it, but it seems the issue was putting down the key before
testing for resize/move in the code. Now who knows why this actually
matters, but apparently it works for the user in question and I don't
observe any unexpected behavior on my end when swapping the order. Like
the mouse/pointer code, we also now do a test for dragging before
actually trying a resize/move which is a little more consistent than
before. Fixes#9771.
Not sure when this actually started happening, but it's probably been
like this for years. Currently, the logic for the window-controls works
by simply checking if the osc is visible and then either enabling or
disabling the associated keybindings. The problem is that this can just
constantly spam mp.enable_keybindings/disable_key_bindings on every
single render call if the user disables the border at any point in time.
This does a lot of pointless work and also results in the logs being
spammed with lines like "disable-section". Clearly, this should just
work like the code for checking the input keybindings just above it.
Keep track of an internal state variable and check when it doesn't match
the osc visibility. In that case, we can then either enable or disable
the key bindings and just update the variable.
This allows us to more easily see the datapath from mpv to pipewire.
We know how often the callbacks are triggered, how big the buffers are
and how much data mpv provides to pipewire.
BSDs use compiler-rt instead of libatomic for atomic types. In this
case, we can handle it similar to how dl is detected. Check for the
library (allowing for it to fail), and then check for a header symbol
while linking latomic. Fixes#10906.
Currently, the lcms-related options are only defined when lcms2 is
enabled at build time. However, this causes issues (e.g. segfault) for
vo_gpu_next, which relies on the presence of these options (to forward
them to libplacebo).
(That libplacebo internally depends on lcms2 as well is an
implementation detail - compiling mpv *without* lcms against libplacebo
*with* lcms should be possible in principle)
Fixes: #10891Closes: #10856
Meson uses the sysconfdir option for setting the global config
directory. This conveniently defaults to /etc if the prefix is set to
/usr which is nice for linux distros. BSDs tend to use /usr/local which
causes this value to become 'etc' by default which is not an absolute
path so you would need to set something like -Dsysconfdir=/usr/local/etc
as well in the configuration step. It turns out we can have our cake and
eat it too by just joining the paths of prefix and sysconfdir together.
In the case where -Dprefix=/usr, this still results in /etc/mpv as the
path since the path joining logic just drops the leading '/usr/'. For
the /usr/local case, it ends up as /usr/local/etc/mpv as expected. This
fixes#10882.
When the alpha channel is the first component, this code block gets
skipped by the continue, meaning the check for c==0 never passes.
Fix it by explicitly keeping track of whether bits have been set.
Related issue: #10868. While most protocols are in theory optional, a
small amount of them are absolutely essential and nothing will work
without them. We should make sure to error out in those cases and not
try to actually do anything. For wayland support in general,
wl_compositor support is obviously required. If there is no wl_surface,
you can't do anything. Additionally, vo_wlshm quite obviously requires
wl_shm so mark that one as well. vo_dmabuf_wayland needs linux_dmabuf,
viewporter, wl_shm, and wl_subcompositor. In practice, these are all
very standard protocols and shouldn't be missing but the linked issue
above is at least one example where a compositor was stuck on an ancient
version of a wayland interface.
Apparently, it is possible for touchbar.m to compile on non-macos
machines. Also, the disable switch didn't actually work either. Fix this
by using the require() function and making sure that Cocoa (should be
apple-only) is found in addition to the compile check passing which is
what waf does. Fixes#10847.
This is a very simple but easy way of doing it. Ideally, it would be
nice if we could also add some sort of introspection about shader
parameters at runtime, ideally exposing the entire list of parameters as
a custom property dict. But that is a lot of effort for dubious gain.
It's worth noting that, as currently implemented, re-setting
`glsl-shader-opts` to a new value doesn't reset back previously mutated
values to their defaults.
In practice this never led to any issues due to implementation
details of bstr_sanitize_utf8_latin1, but there's no guarantee that
a bstr is correctly null-terminated.
This allows the core of mpv to know about issues in the AO.
Otherwise playback will just freeze as no more data callbacks are sent
by PipeWire.
Also it allows mpv to try to reconnect the AO or find another, working
AO.
We want to add more logic to the stream event handler.
This logic should not be triggered during normal stream shutdown, so we
remove the listener beforehand.
sfan5
Sultan Alsawaf
Niklas Haas
Dudemanguy
Ionen Wolkens
Christoph Reiter
Simon Ruderich
repojohnray
repojohnray
Li Chang
Kacper Michajłow
Nicolas F
chen70
garamond13
Thomas Weißschuh
rcombs
Jan Ekström
Aman Karmani