When af_scaletempo2.c:process() detects a format change, it goes back
through mp_scaletempo2_init() to reinitialize everything. However,
mp_scaletempo2.input_buffer is not necessarily reallocated due to a
check in af_scaletempo2_internals.c:resize_input_buffer(). This is a
problem if the number of audio channels increases, since without
reallocating, the buffer for the new channel(s) will at best point to
NULL, and at worst uninitialized memory.
Since resize_input_buffer() is only called from two places, pull size
check out into mp_scaletempo2_fill_input_buffer(). This allows each
caller to decide whether they want to resize or not. We could be
smarter about when to reallocate, but that would add a lot of machinery
for a case I don't expect to be hit often in practice.
Simply returning out of this function leaks avpkt, need to always "goto
done".
Rewrite the logic a bit to make it more clear what's going on (IMO).
Fixes#9593
This brings my scaletempo2 benchmark down from ~22s to ~7s on my machine
(-march=native), and down to ~11s with a generic compile.
Guarded behind an appropriate #ifdef to avoid being ableist against
people who have the clinical need to run obscure platforms.
Closes#8848
scaletempo2 is a new audio filter for playing back
audio at modified speed and is based on chromium
commit 51ed77e3f37a9a9b80d6d0a8259e84a8ca635259.
It sounds subjectively better than the existing
implementions scaletempo and rubberband.
This mode drops or repeats audio data to adapt to video speed, instead
of resampling it or such. It was added to deal with SPDIF. The
implementation was part of fill_audio_out_buffers() - the entire
function is something whose complexity exploded in my face, and which I
want to clean up, and this is hopefully a first step.
Put it in a filter, and mess with the shitty glue code. It's all sort of
roundabout and illogical, but that can be rectified later. The important
part is that it works much like the resample or scaletempo filters.
For PCM audio, this does not work on samples anymore. This makes it much
worse. But for PCM you can use saner mechanisms that sound better. Also,
something about PTS tracking is wrong. But not wasting more time on
this.
Replace use of .min==1 with a proper flag. This is a good idea, because
it has nothing to do with numeric limits (also see commit 9d32d62b61
for how this can go wrong).
With this, m_option.min/max are strictly used for numeric limits.
Change all OPT_* macros such that they don't define the entire m_option
initializer, and instead expand only to a part of it, which sets certain
fields. This requires changing almost every option declaration, because
they all use these macros. A declaration now always starts with
{"name", ...
followed by designated initializers only (possibly wrapped in macros).
The OPT_* macros now initialize the .offset and .type fields only,
sometimes also .priv and others.
I think this change makes the option macros less tricky. The old code
had to stuff everything into macro arguments (and attempted to allow
setting arbitrary fields by letting the user pass designated
initializers in the vararg parts). Some of this was made messy due to
C99 and C11 not allowing 0-sized varargs with ',' removal. It's also
possible that this change is pointless, other than cosmetic preferences.
Not too happy about some things. For example, the OPT_CHOICE()
indentation I applied looks a bit ugly.
Much of this change was done with regex search&replace, but some places
required manual editing. In particular, code in "obscure" areas (which I
didn't include in compilation) might be broken now.
In wayland_common.c the author of some option declarations confused the
flags parameter with the default value (though the default value was
also properly set below). I fixed this with this change.
Before this commit, option declarations used M_OPT_MIN/M_OPT_MAX (and
some other identifiers based on these) to signal whether an option had
min/max values. Remove these flags, and make it use a range implicitly
on the condition if min<max is true.
This requires care in all cases when only M_OPT_MIN or M_OPT_MAX were
set (instead of both). Generally, the commit replaces all these
instances with using DBL_MAX/DBL_MIN for the "unset" part of the range.
This also happens to fix some cases where you could pass over-large
values to integer options, which were silently truncated, but now cause
an error.
This commit has some higher potential for regressions.
This filter wasn't referenced anywhere and thus was dead code. It should
have been in the audio filter list in user_filters.c. This was intended
as compatibility wrapper (to avoid breaking old command lines and config
files), and has no real use. Apparently I forgot to add it to the filter
list (did I even test this shit?), and so it was rotting around for 1.5
years doing nothing (just like myself).
Note that users can just use the libavfilter provided filter to force
resampling, just that it has a different name and different options.
There's also af_format to force inserting auto conversion through the
internal f_swsresample filter.
This helps the filter to adapt much faster to speed changes. Before this
commit, the filter just converted and output the full input frame, which
could cause problems with large input frames. This was made worse by
certain filters like dynaudnorm or loudnorm outputting pretty large
frames.
This commit changes the filter from trying to convert all input at once
to only outputting a single internally filtered frame. Internally, this
filter already output data in units of 60ms by default (controlled by
the "stride" sub-option), and concatenated as many output frames as
necessary to consume all input.
Behavior is still kind of bad when inserting the filter. This is because
the large frames can be buffered up after the insertion point, so the
speed change will be performed with a larger latency. The scaletempo
filter can't do anything against this, although it can be fixed by
inserting scaletempo as user filter as part of --af.
This commit introduces the multiply-pitch af-command. Users may bind
keys to this command in order to incrementally adjust the pitch of a
track. This will probably mostly be useful for musicians trying to
transpose up and down by semi tones without having to calculate
the correct ratio beforehand.
As an example, here is an input.conf to test this feature:
{ af-command all multiply-pitch 0.9438743126816935
} af-command all multiply-pitch 1.059463094352953
The future direction might be not having such a user-visible filter at
all, similar to how vf_scale went away (or actually, redirects to
libavfilter's vf_scale).
This is part of trying to get rid of --af-defaults, and the af
resample filter.
It requires a complicated mechanism to set the defaults on the resample
filter for backwards compatibility.
This does what af_volume used to do. Since we couldn't relicense it,
just rewrite it. Since we don't have a new filter mechanism yet, and the
libavfilter is too inconvenient, do applying the volume gain in ao.c
directly. This is done before handling the audio data to the driver.
Since push.c runs a separate thread, and pull.c is called asynchronously
from the audio driver's thread, the volume value needs to be
synchronized. There's no existing central mutex, so do some shit with
atomics. Since there's no atomic_float type predefined (which is at
least needed when using the legacy wrapper), do some nonsense about
reinterpret casting the float value to an int for the purpose of atomic
access. Not sure if using memcpy() is undefined behavior, but for now I
don't care.
The advantage of not using a filter is lower complexity (no filter auto
insertion), and lower latency (gain processing is done after our
internal audio buffer of at least 200ms).
Disavdantages include inability to use native volume control _before_
other filters with custom filter chains, and the need to add new
processing for each new sample type.
Since this doesn't reuse any of the old GPL code, nor does indirectly
rely on it, volume and replaygain handling now works in LGPL mode.
How to process the gain is inspired by libavfilter's af_volume (LGPL).
In particular, we use exactly the same rounding, and we quantize
processing for integer sample types by 256 steps. Some of libavfilter's
copyright may or may not apply, but I think not, and it's the same
license anyway.
These couldn't be relicensed, and won't survive the LGPL transition. The
other existing filters are mostly LGPL (except libaf glue code).
This remove the deprecated pan option. I guess it could be restored by
inserting a libavfilter filter (if there's one), but for now let it be
gone.
This temporarily breaks volume control (and things related to it, like
replaygain).
See "Copyright" file for caveats.
This changes the remaining "almost LGPL" files to LGPL, because we think
that the conditions the author set for these was finally fulfilled.
This code could not be relicensed. The intention was to write new filter
code (which could handle both audio and video), but that's a bit of
work. Write some code that can do audio conversion (resampling,
downmixing, etc.) without the old audio filter chain code in order to
speed up the LGPL relicensing.
If you build with --disable-libaf, nothing in audio/filter/* is compiled
in. It breaks a few features, such as --volume, --af, pitch correction
on speed changes, replaygain.
Most likely this adds some bugs, even if --disable-libaf is not used.
(How the fuck does EOF notification work again anyway?)
Move it from af_lavrresample.c to a new aconverter.c file, which is
independent from the filter chain code. It also doesn't use mp_audio,
and thus has no GPL dependencies.
Preparation for later commits. Not particularly well tested, so have
fun.
This was _always_ called, even if the resampling was static, or the
filter was inserted for format conversion only. This should have been
fine, as I expected the function not to enable resampling when the
compensation is unset, and the source/target rates are the same. But
this is not the case, and it always enables resampling.
So explicitly avoid the call. If we have already called it successfully,
it's better not do avoid it (to overwrite the previous compensation
value), but it will also be cheap/no-op then.
Probably fixes#4716.
This API isn't deprecated (yet?), but it's still inferior and harder to
use than avcodec_free_context().
Leave the call only in 1 case in af_lavcac3enc.c, where we apparently
seriously close and reopen the encoder for whatever reason.
This is the last sample format that was only in mpv and not in FFmpeg
(except the spdif special formats). It was a huge pain, even if the
removed code in af_lavrresample is pretty small after all.
Note that this drops S24 from the ao_coreaudio AOs too. I'm not sure
about the impact, but I expect it doesn't matter.
af_fmt_change_bytes() was unused as well, so remove that too.
This case is a bit weird, because MPlayer certainly also has a file
named af_format.c. Both appear to have the function of converting audio
data between sample formats.
However, mpv's af_format.c is a rewrite, and doesn't actually do
conversion by itself. It's similar to vf_format.c, and forces the
generic filter chain code to insert conversion filters, instead of doing
conversion explicitly.
mpv's current af_format.c started out as af_force.c in d9582ad0a4. It
was renamed to af_format.c in e60b8f181d, while the old af_format.c was
split into two new filters. In 943c785619 the filename was changed to
af_format.c as well.
The new af_format.c does not contain any libaf code, except for some
potentially copy & pasted skeleton and boilerplate code. (We don't
account for this in per-filter file licenses, as the old libaf code
has to be removed fully, at which point the filters will have to be
ported to another framework, which will removed that boilerplate code.)
The old filters based on af_format.c were progressively replaced and
removed. Support for non-native endian and formats with signedness
different from native FFmpeg was completely removed in 831d7c3c40.
The old 24 bit conversion code was removed in 552dc0d564 (made
unnecessary by 5a9f817bfd).
Also list hwdec_vaglx.c as GPL-only, which doesn't have anything to do
with this commit.
All authors have agreed.
The initial commit d33703496c as well as the current code contain this
line:
* inspired by SoundTouch library by Olli Parviainen
We assume this is about the algorithm (not the code), and the author of
the original patch actually wrote all code himself.
The new replaygain code accidentally applied the linear gain as cubic
volume level. Fix this by moving the computation of the volume scale out
of the af_volume filter.
(Still haven't verified whether the replaygain code works correctly.)
Literally copy-pasted from the same commit for video filters. (Once new
code for filters is implemented, this will all go away or at least get
unified anyway.)
This was supposed to restrict output to formats supported by us. But we
usually support all FFmpeg sample formats anyway (if not, it will error
out gracefully, and we would add the missing format). Basically, it's
just useless bloat.
Basically, see the example in input.rst.
This is better than the "old" vf-toggle method, because it doesn't
require the user to duplicate the filter string in mpv.conf and
input.conf.
Some aspects of this changes are untested, so enjoy your alpha testing.
