CC demux/demux.o
demux/demux.c: In function 'demuxer_switch_track':
demux/demux.c:1241:29: warning: array subscript is above array bounds [-Warray-bounds]
int new_id = demuxer->ds[type]->id;
^
No subtitle selected was supposed to disable the preroll logic
completely. However, the packet skipping logic was not properly enabled,
so the demuxer would still return subtitle packets from before the seek
target timecode. This shouldn't matter at all in practice, but fixing
this makes the code clearer.
Makes sure that seeking to a given time position shows the subtitle at
that position. This can fail if the subtitle packet is not close enough
to the seek target. Always enabled for hr-seeks, and can be manually
enabled for normal seeks with --mkv-subtitle-preroll.
This helps displaying subtitles correctly with ordered chapters. When
switching ordered chapter segments, a seek is performed. If the subtitle
is timed slightly before the start of the segment, it normally won't be
demuxed. This is a problem with all seeks, but in this case normal
playback is affected. Since switching segments always uses hr-seeks,
the code added by this commit is always active in this situation.
If no subtitles are selected or the subtitles come from an external
file, the demuxer should behave exactly as before this commit.
Commit 546ae23 fixed aspect ratio if the DisplayWidth or DisplayHeight
elements were missing. However, some bogus files [1] can have these
elements present in the file, but set to 0. Use 1:1 pixel aspect for
such files.
[1] https://ffmpeg.org/trac/ffmpeg/ticket/2424
Commit ac1c5e6 (demux_mkv: improve robustness against broken files)
added code to skip to the next cluster on error conditions. However,
reaching normal EOF triggers this code as well, so explicitly check
for EOF before this happens. Note that the EOF flag is only set _after_
reading the last byte, so EOF needs to be checked after the fact. (Or
in other words, we must check for EOF after the ebml_read_id() call.)
(To answer the question why reading packets actually reaches EOF, even
if there's the seek index between the last packet and the end of the
file: the cluster reading code skips the seeking related EBML elements
as normal part of operation, so it hits EOF gracefully when trying to
find the next cluster.)
Fixes test7.mkv from the Matroska test file collection, as well as some
real broken files I've found in the wild. (Unfortunately, true recovery
requires resetting the decoders and playback state with a manual seek,
but it's still better than just exiting.)
If there are broken EBML elements, try harder to skip them correctly.
Do this by searching for the next cluster element. The cluster element
intentionally has a long ID, so it's a suitable element for
resynchronizing (mkvmerge does something similar).
We know that data is corrupt if the ID or length fields of an element
are malformed. Additionally, if skipping an unknown element goes past
the end of the file, we assume it's corrupt and undo the seek. Do this
because it often happens that corrupt data is interpreted as correct
EBML elements. Since these elements will have a ridiculous values in
their length fields due to the large value range that is possible
(0-2^56-2), they will go past the end of the file. So instead of
skipping them (which would result in playback termination), try to
find the next cluster instead. (We still skip unknown elements that
are within the file, as this is needed for correct operation. Also, we
first execute the seek, because we don't really know where the file
ends. Doing it this way is better for unseekable streams too, because
it will still work in the non-error case.)
This is done as special case in the packet reading function only. On
the other hand, that's the only part of the file that's read after
initialization is done.
Fixes test4.mkv from the Matroska test file collection.
demux_mkv_open() contains a loop that reads header elements. It starts
by reading the EBML element ID with ebml_read_id(). If there is broken
data in the header, ebml_read_id() might return EBML_ID_INVALID.
However, that is not handled specially, and the code for handling
unknown tags is invoked. This reads the EBML element length in order to
skip data, which, if the EBML ID is broken, is entirely random. This
caused a seek beyond the end of the file, making the demuxer fail.
So don't skip any data if the EBML ID was invalid, and simply try to
read the next element. ebml_read_id() reads at least one byte, so the
parsing loop won't get stuck.
All in all this is rather questionable, but since this affects error
situations only, makes behavior a bit more robust (no random seeks), and
actually fixes at least one sample, it's ok.
libavformat's demuxer handled this.
The code modified by this commit is supposed to prevent demuxing the
whole file when cover art is present. (The problem with cover art is
that the ffmpeg libavformat API doesn't signal video EOF correctly - so
we try to read more packets to find the next video frame, which results
in demuxing and queuing the whole audio stream.)
This caused regressions for files with extremely high audio offset (see
github issue #46). MY conclusion is that this cover art crap doesn't
work, and this is just another case of completely insane ffmpeg/libav
API.
Disable the hack in all cases, unless a cover art video track is
selected. Maybe I'll handle cover art directly in the frontend later, so
that we don't have to rely on whatever libavformat does.
Unfortunately, this also makes behavior with equally insane mp4 files
with sparse video tracks worse, but this issue takes priority.
Doing 'mpv mf://*' in a file with directories would crash, because even
though directories are skipped, the corresponding file entry is just
left at NULL, leading to a segfault on access. So explicitly skip NULL
entries.
FFmpeg recently changed how it writes Opus-in-Matroska to match
the A_OPUS/EXPERIMENTAL name that mkvmerge uses, with the caveat
that things will change and compatibility with old files can get
worked out when the spec is finalized.
This adds both A_OPUS and A_OPUS/EXPERIMENTAL so that *hopefully*
it can play both the newer files that use A_OPUS/EXPERIMENTAL, and
older ones muxed by FFmpeg that were simply A_OPUS, since this is
also what FFmpeg seems to be doing to handle the situation.
r_frame_rate was deprecated and was finally removed from Libav and
FFmpeg git.
Not sure what's the correct replacement. avg_frame_rate may or may not
be worse than the fallback of using the time_base as guess. The
framerate is mostly unused, but needed for frame-based subtitles and for
encoding. (It appears encoding guesses a timebase based on the FPS, and
I'm not sure why we don't just use the source timebase.)
The old names have been deprecated a while ago, but were needed for
supporting older ffmpeg/libav versions. The deprecated identifiers
have been removed from recent Libav and FFmpeg git.
This change breaks compatibility with Libav 0.8.x and equivalent
FFmpeg releases.
Emulate percentage-seeks (SEEK_FACTOR) as normal time-seeks if possible.
This fixes some issues with (let's call it) low quality implementations
of SEEK_FACTOR (e.g. demux_mkv basically interprets this as byte-seek,
and also seeking to 99.9% makes it seek back to the start).
For weird MPEG formats the demuxer level SEEK_FACTOR is still used.
These formats, which can have timestamp resets, are identified by
setting demuxer->ts_resets_possible to true.
Also, have get_current_pos_ratio() follow the same rules, and calculate
the percentage position with the file position if timestamp resets are
possible.
This actually fixes percentage-seeks in .ts files with demux_lavf.c.
This kind of seek is not really used now, but it will be more important
when we add a progress bar.
Note: seeking in chained ogg files is still completely broken. The main
issue is that ffmpeg doesn't provide a sane API for dealing with
timestamp resets, and trying to do byte seeks with ogg confuses demuxer
and decoder (or something like this) and just does random things.
(Tested with two concatenated flac-in-ogg files).
AVFormatContext.start_time is sometimes AV_NOPTS_VALUE, such as when
playing FLAC files. (For most other file formats it's set to 0, even if
the format doesn't support arbitrary start times.)
OPT_BASE_STRUCT defines which struct the OPT_ macros (like OPT_INT etc.)
reference implicitly, since these macros take struct member names but no
struct type. Normally, only cfg-mplayer.h should need this, and other
places shouldn't be bothered with having to #undef it.
(Some files, like demux_lavf.c, still store their options in MPOpts. In
the long term, this should be removed, and handled like e.g. with VO
suboptions instead.)
The percent position is used for the OSD, the status line, and for the
OSD bar (shown on seeks). By default, the PTS of the last demuxed packet
was used to calculate it. This led to a "jumpy" display when the
percentage value (casted to int) was changing. The reasons for this were
the presence of video frame reordering (packet PTS is not monotonic), or
getting PTS values from different streams (like audio/subs).
Since these rely on PTS values and correct file durations anyway,
simplify it by calculating it with the current playback position in
mplayer.c instead.
And support the PIX_FMT_MONOWHITE pixel format. (This is really weird:
unlike PIX_FMT_MONOBLACK, it uses white pixels. I have no idea why
libavcodec doesn't just convert the pixel format on the fly, instead of
bothering everyone with really special pixel formats.)
Seeking before the start of a .flac file (such as seeking backwards when
the file just started) generates a bunch of decoding errors and audible
artifacts. Also, the audio output doesn't match the reported playback
position. The errors printed to the terminal are:
[flac @ 0x8aca1c0]invalid sync code
[flac @ 0x8aca1c0]invalid frame header
[flac @ 0x8aca1c0]decode_frame() failed
This is most likely a problem with the libavformat API. When seeking
with av_seek_frame() fails, the demuxer can be left in an inconsistent
state. ffplay has the same issue [1].
Older versions of mpv somehow handled this fine. Bisection shows that
commit b3fb7c2 caused this regression by removing code that retried
failed seeks with an inverted AVSEEK_FLAG_BACKWARD flag. This code was
removed because it made it harder to stop playback of a file by seeking
past the end of the file (expecting this is rather natural when skipping
through multiple files by seeking, and the internal mplayer demuxers
also did this).
As a workaround, re-add the original code, but only for the backwards
seeking case.
Also note that the original intention of the code removed in b3fb7c2 was
not dealing with this case, but something else. It also had to do with
working around weird libavformat situations, though. It's not perfectly
clear what exactly. See commit 1ad332f.
[1] https://ffmpeg.org/trac/ffmpeg/ticket/2282
Apparently this cuases trouble for legacy demuxers. demux_mpg stopped
doing PCM audio. (The problem was probably that it read a bunch of
video packets on detection, and then the sparse video hack prevented
audio packets from being read, because it looked like there were no
more audio packets. With sparse video, this normally helps not reading
too many audio packets.)
Since the legacy demuxers do not need this hack, enable it for
demux_lavf and demux_mkv only.
Some additional hacks that were needed to handle legacy demuxers can be
removed, making the code simpler.
Also see commit 4a40eed.
There should be no functional changes, except that way how avoiding
spamming the terminal with the overflow warning is handled changes a
bit.
The removed check for ds->eof looks suspicious, but it should be
redundant now.
Commit 4d016a9 changed how demuxers report the codec of each stream.
Some of that was missed in video.c, which is important for legacy
demuxers (demux_mpg was broken by this, which is needed for DVD
playback).
Not sure about the ASF/AVI related change, but this is also a legacy
demuxers only codepath.
Instead of putting codec header data into WAVEFORMATEX and
BITMAPINFOHEADER, pass it directly via AVCodecContext. To do this, we
add mp_copy_lav_codec_headers(), which copies the codec header data
from one AVCodecContext to another (originally, the plan was to use
avcodec_copy_context() for this, but it looks like this would turn
decoder initialization into an even worse mess).
Get rid of the silly CodecID <-> codec_tag mapping. This was originally
needed for codecs.conf: codec tags were used to identify codecs, but
libavformat didn't always return useful codec tags (different file
formats can have different, overlapping tag numbers). Since we don't
go through WAVEFORMATEX etc. and pass all header data directly via
AVCodecContext, we can be absolutely sure that the codec tag mapping is
not needed anymore.
Note that this also destroys the "standard" MPlayer method of exporting
codec header data. WAVEFORMATEX and BITMAPINFOHEADER made sure that
other non-libavcodec decoders could be initialized. However, all these
decoders have been removed, so this is just cruft full of old hacks that
are not needed anymore. There's still ad_spdif and ad_mpg123, bu neither
of these need codec header data. Should we ever add non-libavcodec
decoders, better data structures without the past hacks could be added
to export the headers.
Rearrange some code to make it easier readable. Remove some dead code,
and stop printing AVI headers in demux_lavf. (These are not actual AVI
headers, just for internal use.)
There should be no functional changes, other than reducing output in
verbose mode.
Also move the lang field into the general stream header. (SH_COMMON is
an old hack to "share" code between audio/video/sub headers.)
There should be no functional changes, other than not printing stream
info in verbose mode or with slave mode. (The frontend already prints
stream info, and this is just a leftover when individual demuxers did
this, and slave mode remains broken.)
Use codec names instead of FourCCs to identify codecs. Rewrite how
codecs are selected and initialized. Now each decoder exports a list
of decoders (and the codec it supports) via add_decoders(). The order
matters, and the first decoder for a given decoder is preferred over
the other decoders. E.g. all ad_mpg123 decoders are preferred over
ad_lavc, because it comes first in the mpcodecs_ad_drivers array.
Likewise, decoders within ad_lavc that are enumerated first by
libavcodec (using av_codec_next()) are preferred. (This is actually
critical to select h264 software decoding by default instead of vdpau.
libavcodec and ffmpeg/avconv use the same method to select decoders by
default, so we hope this is sane.)
The codec names follow libavcodec's codec names as defined by
AVCodecDescriptor.name (see libavcodec/codec_desc.c). Some decoders
have names different from the canonical codec name. The AVCodecDescriptor
API is relatively new, so we need a compatibility layer for older
libavcodec versions for codec names that are referenced internally,
and which are different from the decoder name. (Add a configure check
for that, because checking versions is getting way too messy.)
demux/codec_tags.c is generated from the former codecs.conf (minus
"special" decoders like vdpau, and excluding the mappings that are the
same as the mappings libavformat's exported RIFF tables). It contains
all the mappings from FourCCs to codec name. This is needed for
demux_mkv, demux_mpg, demux_avi and demux_asf. demux_lavf will set the
codec as determined by libavformat, while the other demuxers have to do
this on their own, using the mp_set_audio/video_codec_from_tag()
functions. Note that the sh_audio/video->format members don't uniquely
identify the codec anymore, and sh->codec takes over this role.
Replace the --ac/--vc/--afm/--vfm with new --vd/--ad options, which
provide cover the functionality of the removed switched.
Note: there's no CODECS_FLAG_FLIP flag anymore. This means some obscure
container/video combinations (e.g. the sample Film_200_zygo_pro.mov)
are played flipped. ffplay/avplay doesn't handle this properly either,
so we don't care and blame ffmeg/libav instead.
The ffmpeg/libav attached picture hack usually set the PTS of video
packets to AV_NOPTS_VALUE. Set it to 0 to avoid printing a warning by
the filter code.
Should be dead code. Stream selection is handled either during
demuxer initialization, or via DEMUXER_CTRL_SWITCH_*.
(If there were actually situations where this code did something, it
was probably broken anyway.)
It appears this is not needed anymore. ffmpeg can handle "chained" ogg
files fine. These can be created with "cat file1.ogg file2.ogg > chained.ogg",
and are similar (or equal) to some internet radio streams. Apparently
ffmpeg used to add new tracks when crossing boundaries in chained files,
and the hack in demux_lavf.c handled this. At some later point, ffmpeg's
ogg demuxer was improved, and stopped adding new tracks as long as the
codec doesn't change.
Since the hack in demux_lavf.c was hardcoded to Vorbis (i.e. only active
if the new and old track were both Vorbis), it's dead code, and we can
remove it. I couldn't find any stream that triggered this hack, or fails
without it.
Firefox had a similar issue, and its bug tracker makes a good reference:
https://bugzilla.mozilla.org/show_bug.cgi?id=455165
NOTE: this doesn't update metadata on track changes anymore.
Select the generic raw video decoder in codecs.cfg ("MPrv" FourCC),
which forces the generic lavc raw video decoder "rawvideo". This means
all FourCCs understood by lavc rawvideo are supported, not just whatever
has codecs.cfg entries.
In commit 2dd2d9b, raw PCM was switched to always go through ad_lavc,
and mapping codec IDs to mplayer internal codec tags was removed, as it
was not needed anymore. However, some uncompressed audio lavf demuxers
export their own codec tags, which collide with the existing internal
mplayer codec tags, leading to incorrect raw PCM codec selection based
on the misinterpreted audio tag. Re-add the mapped codec IDs from
2dd2d9b. Map them to an invalid codec tag, so that the generic lavc
decoder is selected (assumes ad_lavc is the decoder for raw PCM).
mplayer's video chain traditionally used FourCCs for pixel formats. For
example, it used IMGFMT_YV12 for 4:2:0 YUV, which was defined to the
string 'YV12' interpreted as unsigned int. Additionally, it used to
encode information into the numeric values of some formats. The RGB
formats had their bit depth and endian encoded into the least
significant byte. Extended planar formats (420P10 etc.) had chroma
shift, endian, and component bit depth encoded. (This has been removed
in recent commits.)
Replace the FourCC mess with a simple enum. Remove all the redundant
formats like YV12/I420/IYUV. Replace some image format names by
something more intuitive, most importantly IMGFMT_YV12 -> IMGFMT_420P.
Add img_fourcc.h, which contains the old IDs for code that actually uses
FourCCs. Change the way demuxers, that output raw video, identify the
video format: they set either MP_FOURCC_RAWVIDEO or MP_FOURCC_IMGFMT to
request the rawvideo decoder, and sh_video->imgfmt specifies the pixel
format. Like the previous hack, this is supposed to avoid the need for
a complete codecs.cfg entry per format, or other lookup tables. (Note
that the RGB raw video FourCCs mostly rely on ffmpeg's mappings for NUT
raw video, but this is still considered better than adding a raw video
decoder - even if trivial, it would be full of annoying lookup tables.)
The TV code has not been tested.
Some corrective changes regarding endian and other image format flags
creep in.
Simplify the decoder pixel format handling by making it handle only
the case vd_lavc needs: a video stream always decodes to a single
pixel format.
Remove the handling for multiple pixel formats, and remove the
codecs.conf pixel format declarations that are left.
Remove the handling of "ambiguous" pixel formats like YV12 vs. I420 (via
VDCTRL_QUERY_FORMAT etc.). This is only a problem if the video chain
supports I420, but not YV12, which doesn't seem to be the case anywhere,
and in fact would not have any advantage.
Make the "flip" flag a global per-codec flag, rather than a pixel format
specific flag. (Some ffmpeg decoders still return a flipped image, so
this has to be done manually.) Also fix handling of the flip operation:
do not overwrite the global flip option, and make the --flip option
invert the codec flip option rather than overriding it.
This function sucks and apparently is not very portable (at least on
mingw, the configure check fails). Also remove the emulation of that
function from osdep/strsep*, and remove the configure check.
Change the only usage of HAVE_BUILTIN_EXPECT, demux.h, to use an #ifdef
instead. In theory, a configure check is better, but nobody does it this
way anyway, and we seek to reduce the configure script.
Something produces corrupt Matroska files with audio tracks that have
SamplingFrequency set to 44100 and OutputSamplingFrequency to 96000,
when the correct playback rate is 44100. Add a special case for this
44100/96000 combination and override it to 44100/44100; it's unlikely
that anyone would ever want to use this 44100/96000 combination for
real in valid files.
The warnings in demux_mpg were silenced by additional no-operation
casts.
A variable in ass_mp was used only for some versions of libass; now the
declaration is in that version #ifdef too to avoid a compiler warning.
Improve EOF handling in ds_fill_buffer for the case where one stream ends
much earlier than the others, in particular make sure the "too many ..."
message is not printed over and over.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@32823 b3059339-0415-0410-9bf9-f77b7e298cf2
Conflicts:
libmpdemux/demuxer.c
Try to improve seeking in files with only few video packets,
in particular files with cover art.
This might cause issues with badly interleaved files, particularly
together with -audio-delay, even though I did not see issues
in my very limited testing.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@35486 b3059339-0415-0410-9bf9-f77b7e298cf2
Conflicts:
libmpdemux/demuxer.c
libmpdemux/demuxer.h
Fix code that detects streams temporarily lacking data to work
properly with e.g. DVDs.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@35499 b3059339-0415-0410-9bf9-f77b7e298cf2
Conflicts:
libmpdemux/demuxer.c
Make stream eof detection less sensitive.
Fixes bug #2111.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@35543 b3059339-0415-0410-9bf9-f77b7e298cf2
Conflicts:
libmpdemux/demuxer.c
