Some demuxers do not accurately seek to a keyframe before a given
time but instead start too late. This means that precise seeks cannot
work either. Most notably the libavformat mpeg demuxer exhibits this
behavior depending on the file being played (with the internal mpeg
demuxer precise seeks don't work at all). Add new option
--hr-seek-demuxer-offset which can be used as a workaround with such
demuxers. The value of the option is subtracted from the seek target
position given to the demuxer when doing a precise seek.
Something like the OSD menu functionality could be useful. However the
current implementation has several problems and would require a
relatively large amount of work to get into good shape. As far as I
know there are few users of the existing functionality. Nobody is
working on the existing code and keeping it compiling at all while
changing other code would require extra work. So delete the menu code
and some related code elsewhere that's used by nothing else.
Rewrite control of the colorspace and input/output level parameters
used in YUV-RGB conversions, replacing VO-specific suboptions with new
common options and adding configuration support to more cases.
Add new option --colormatrix which selects the colorspace the original
video is assumed to have in YUV->RGB conversions. The default
behavior changes from assuming BT.601 to colorspace autoselection
between BT.601 and BT.709 using a simple heuristic based on video
size. Add new options --colormatrix-input-range and
--colormatrix-output-range which select input YUV and output RGB range.
Disable the previously existing VO-specific colorspace and level
conversion suboptions in vo_gl and vo_vdpau. Remove the
"yuv_colorspace" property and replace it with one named "colormatrix"
and semantics matching the new option. Add new properties matching the
options for level conversion.
Colorspace selection is currently supported by vo_gl, vo_vdpau, vo_xv
and vf_scale, and all can change it at runtime (previously only
vo_vdpau and vo_xv could). vo_vdpau now uses the same conversion
matrix generation as vo_gl instead of libvdpau functionality; the main
functional difference is that the "contrast" equalizer control behaves
somewhat differently (it scales the Y component around 1/2 instead of
around 0, so that contrast 0 makes the image gray rather than black).
vo_xv does not support level conversion. vf_scale supports range
setting for input, but always outputs full-range RGB.
The value of the slave properties is the policy setting used for
conversions. This means they can be set to any value regardless of
whether the current VO supports that value or whether there currently
even is any video. Possibly separate properties could be added to
query the conversion actually used at the moment, if any.
Because the colorspace and level settings are now set with a single
VF/VO control call, the return value of that is no longer used to
signal whether all the settings are actually supported. Instead code
should set all the details it can support, and ignore the rest. The
core will use GET_YUV_COLORSPACE to check which colorspace details
have been set and which not. In other words, the return value for
SET_YUV_COLORSPACE only signals whether any kind of YUV colorspace
conversion handling exists at all, and VOs have to take care to return
the actual state with GET_YUV_COLORSPACE instead.
To be changed in later commits: add missing option documentation.
The last libpostproc major version change from 51 to 52 changed the
type of the "pp_help" symbol from a pointer to help text to the help
text itself. This made --pphelp crash. Change the option definition to
match the new type. This probably makes it crash if compiled against
older libpostproc, but the option is not important enough to try
supporting that (I've seen no reports of the crash, probably people
just don't use the option).
Add functionality to mark options that depend on features disabled at
compile time as disabled rather than not compiling the option
definitions at all. This allows printing a warning about the option
not being available because of a disabled feature, instead of just
"unknown option". Because the option definitions are still compiled
fully, this only works for definitions that do not reference symbols
which are not available if the feature is disabled. Use the new
functionality for options depending on libass.
Add option --ass-vsfilter-aspect-compat and corresponding property
ass_vsfilter_aspect_compat. The setting controls whether to enable the
emulation of traditional VSFilter behavior where subtitles are
stretched if the video is anamorphic (previously always enabled for
native SSA/ASS subtitles). Enabled by default. Add 'V' as a new
default keybinding to toggle the property.
Remove several old options that were deprecated and disabled years ago
and whose only effect now was to show a custom error message about the
option in question being deprecated and then exit. Also remove the -vd
option which was just a stupid joke and never had useful functionality.
Make per-file loop option start from --ss position, not always 0.
Do looping in more cases; before looping was only done when
encountering real end of file, now it also happens for example at
--endpos or --frames limits. Also move the --ss option to the option
struct.
The --ass-force-style option was only applied when the main libass
library handle was created. Thus any per-file option changes later had
no effect. Do the ass_set_style_overrides() call in per-file
initialization instead so that possible changes will be applied. Also
move the option variable to the option struct.
Current libass will crash (usually) if you set style overrides to a
nonempty value, then an empty one. It'll be easier to trigger this bug
after this commit, but the problem is not on mplayer2 side. The fix is
trivial so hopefully there will be a fixed libass soon.
Rework much of the logic related to reading from event sources and
queuing commands. The two biggest architecture changes are:
- The code buffering keycodes in mp_fifo.c is gone. Instead key input
is now immediately fed to input.c and interpreted as commands, and
then the commands are buffered instead.
- mp_input_get_cmd() now always tries to read every available event
from every event source and convert them to (buffered) commands.
Before it would only process new events until one new command became
available.
Some relevant behavior changes:
- Before commands could be lost when stream code called
mp_input_check_interrupt() which read commands (to see if they were
of types that triggered aborts during slow IO tasks) and then threw
them away. This was especially an issue if cache was enabled and slow
to read. Fixed - now it's possible to check whether there are queued
commands which will abort playback of the current file without
throwing other commands away.
- mp_input_check_interrupt() now prints a message if it returns
true. This is especially useful because the failures caused by
aborted stream reads can trigger error messages from other code that
was doing the read; the new message makes it more obvious what the
cause of the subsequent error messages is.
- It's now possible to again avoid making stdin non-blocking (which
caused some issues) without reintroducing extra latency. The change
will be done in a subsequent commit.
- Event sources that do not support select() should now have somewhat
lower latency in certain situations as they will be checked both
before and after select()/sleep in input reading; before the sleep
always happened first even if such sources already had queued
input. Before the key fifo was also handled in this manner (first
key triggered select, but if multiple were read then rest could be
delayed; however in most cases this didn't add latency in practice
as after central code started doing command handling it queried for
further commands with a max sleep time of 0).
- Key fifo limiting is more accurate now: it now counts actual
commands intead of keycodes, and all queued keys are read
immediately from input devices so they can be counted correctly.
- Since keypresses are now interpreted immediately, commands which
change keybindings will no longer affect following keypresses that
have already been read before the command is executed. This should
not be an issue in practice with current keybinding behavior.
Based on patch by Steaphan Greene [sgreene cs.binghamton.edu]
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@33688 b3059339-0415-0410-9bf9-f77b7e298cf2
Add dummy -shuffle and -noshuffle options so they appear in
-list-options output. These features are not implemented as options;
rather they're features of the command line parser.
Also add the CONF_NOCFG flag to the existing playlist option, which is
a similar placeholder for a command line parser feature.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@33147 b3059339-0415-0410-9bf9-f77b7e298cf2
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@33148 b3059339-0415-0410-9bf9-f77b7e298cf2
Add option -osd-fractions which enables display of fractional seconds
when showing the current playback time on OSD.
Based on a patch from Christian <herr.mitterlehner@gsmpaaiml.com> but
with several modifications.
The resulting semantics of this flag are weird enough that they're
unlikely to be what is wanted in any situation. Remove the flag and
convert the two options using it, -screenw and -screenh, to use
CONF_NOSAVE instead. I'm not sure why those specific options had the
flag and if any flag is really needed, but I don't want to check in
detail now and using CONF_NOSAVE should keep about the same behavior
in practice.
A bit more detail about the weird behavior this flag had:
When not using file groups, the flag had the same behavior as
CONF_NOSAVE, namely that when switching files the option would not be
reset to the global value (only possible file-specific settings were
applied). When using file groups, group-specific options would apply
to the _first two_ files in the group, but for the rest after the
first two, settings would not be reset when changing files (wtf?).
This was a result of the following sequence:
1) push higher-level settings, enter group
2) apply group-specific settings
3) push settings before applying ones specific to file 1 in group
4) apply file 1 settings, play file 1
5) pop settings to return to group settings
6) push settings before applying ones specific to file 2
7) apply file 2 settings
8) pop settings
Here the option was set at 2). 3) saved it because it had been set
after last push, so 5) restored the setting and it was used for file 2
too. However 6) no longer saved it because there had been pushes after
the original setting in 2), thus 8) no longer restored the setting and
the option was no longer forced to any particular value when playing
further files after that.
Most of the time users want to keep current fullscreen state when
switching to another file, rather than always resetting to the global
default that was determined when the command line was parsed. Add the
CONF_NOSAVE flag to the -fs option to achieve this. The change means
that the fullscreen state from the previous file is kept unless there
is an explicit file-specific -fs or -nofs setting for the new file
(or in case file groups are used, moving to the new file enters a
group with explicitly specified state).
vo_zr was the last user of the "func_full" option type. I think it's
better if future features are implemented using more straightforward
option functionality. Delete the func_full implementation.
There were multiple files specific to Zoran support, and they also
depended on internal FFmpeg headers (so it would probably have been
hard to get them to compile now even if you tried). It's obsolete now,
so just drop the whole mess.
dxr2 support had been broken quite a while and nobody noticed. There
were finally commits to fix it in the svn repo, but rather than apply
those I'll just drop dxr2 support.
By now VIDIX is too obscure to justify the amount of code and
complexity it requires in the sources. Although there is no pressing
need to drop it just now from a code point of view, I'll rather remove
it before release than release with VIDIX support and then drop it
later.
Some of the manpage mentions of VIDIX were in "this option supported
for these VOs" lists that looked outdated and failed to mention vdpau
for example. Replace such incorrect lists with a generic "not
supported for all VOs" mention.
* sub:
sub/OSD: move some related files to sub/
subtitles: options: enable -ass by default
subtitles: change default libass rendering style
demux_mkv, chapters: change millisecond arithmetic to ns
cleanup: rename ass_* functions to mp_ass_*
subs: use correct font aspect ratio for libass + converted subs
cleanup: some random minor code simplification and cleanup
vf_vo: fix EOSD change detection bug
sd_ass: remove subreader use, support plaintext markup
subtitles: style support for common SubRip tags and MicroDVD
core: ordered chapters: fix bad subtitle parameter
subs/demux: don't try to enable sub track when creating it
subtitles/demux: store duration instead of endpts in demux packets
subtitles: add framework for subtitle decoders
options: add special -leak-report option
subtitles: remove code trying to handle text subs with libavcodec
cleanup: move MP_NOPTS_VALUE definition to mpcommon.h
subtitles: move global ass_track to struct osd_state
core: move most mpcommon.c contents to mplayer.c
core: move global "subdata" and "vo_sub_last" to mpctx
subtitles: remove sub_last_pts hack
options: move -noconfig to option struct, simplify
Add a special option "-leak-report" that enables talloc leak
reporting. It only works if it's given as the first argument.
The code abuses the CONF_TYPE_PRINT option type to make main option
parsing ignore the option. The parser incorrectly consumed the
following commandline argument as a "parameter" for options of this
type when they had the flag to not exit after printing the message.
Fix this. It makes no difference for any previously existing option I
think.
Add support for seeking to an arbitrary non-keyframe position by
decoding video starting from the previous keyframe. Whether to use
this functionality when seeking is controlled by the new option
-hr-seek and a new third argument to the "seek" command. The default
is to use it for absolute seeks (like chapter seeks) but not for
relative ones. Because there's currently no support for cutting
encoded audio some desync is expected if encoded audio passthrough is
used. Currently precise seeks always go to the first frame with
timestamp equal to or greater than the target position; there's no
support for "matching or earlier" backwards seeks at frame level.
Add a "choice" option type. Options of this type take a string as
input and set an int option variable to the value corresponding to the
string. The string->int mapping is option-specific and is given in the
option definition. Strings not found in the mapping are rejected as
invalid option values.
Change the option -pts-association-mode to use this new option type
and accept values "auto, decoder, sort" instead of "0, 1, 2". The
change in accepted values shouldn't cause problems as this option is
not appropriate to use in normal user config files.
Some Matroska files have inaccurate ordered chapter endpoints, and so
parts where one chapter should end and the next begin at the same
timestamp were not merged. This resulted in an unnecessary seek over a
minimal distance. Add a heuristic to merge parts with a minimal gap or
overlap between them.
Based on patch by Hector Martin <hector@marcansoft.com>.
Add code to enforce matching pts with video when (re)starting the
audio stream, by either cutting away the first samples or inserting
silence at the beginning. New option -noinitial-audio-sync can be used
to disable this and return to old behavior.
If the option is enabled and all audio has been buffered to the AO,
then the player will move to the next file without waiting for the
buffered audio to drain, while leaving the AO initialized. If the
playback of the next file starts quickly enough (before the AO buffer
empties) then it should continue writing audio to the same AO with no
gap in between.
If a specified key is pressed during playback, the current stream is
captured to a file, similar to what -dumpstream achieves.
original patch by Pásztor Szilárd, don tricon hu
Taken from the following svn commits, but with several fixes and
modifications (one obvious user-visible difference is that the default
key binding is 'C', not 'c'):
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@32524 b3059339-0415-0410-9bf9-f77b7e298cf2
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@32529 b3059339-0415-0410-9bf9-f77b7e298cf2
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@32530 b3059339-0415-0410-9bf9-f77b7e298cf2
The DIRECTFBVERSION macro that it depends on has been removed.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@32281 b3059339-0415-0410-9bf9-f77b7e298cf2
This solution works just as well, but avoids a separate template file
that needs to be #included from multiple places. The end result is
simpler since common options and those of MPlayer and MEncoder are now
in only one file each.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@31434 b3059339-0415-0410-9bf9-f77b7e298cf2
