With 1.3.277 the AV1 decode headers have been upstreamed.
These get preferred over ffmpeg's internal non-standard header
for this extension (same name). FFmpeg currently only builds
using its own header and a patch to work with upstream ones
is in review.
For now pin vulkan at the version before that to unbreak our CI.
This will prevent building demos and link statically with libplacebo by
default if system libplacebo is not found or isn't new enough and a
sufficiently new enough libplacebo exists in `subprojects/libplacebo`.
Since 1f8013ff3f, if you release a modifier before a regular key on
Wayland, that key gets immediately pressed again because
keyboard_handle_modifiers() calls mp_input_put_key() regardless of
whether a modifier is pressed or released, e.g. if you press Ctrl+s it
easy to take an another screenshot with s by accident. Fix this by
releasing keys when releasing modifiers.
Ideally, releasing the modifier should input the key alone after
--input-ar-delay, while this patch disables it forever, e.g. on X11 if
you type something in the console, hold Ctrl+h, and release Ctrl, it
starts typing h instead of deleting characters. This doesn't work
because keyboard_handle_key() is only called when you first press a key,
while on X11 KeyPress keeps getting sent as you hold down the key. But
this difference in behavior between X11 and Wayland can also be
reproduced with GTK and Qt applications, so I guess this is acceptable.
When the mpv surface leaves the output, we no longer mark it as the
current output. However, this implicitly depends on there being a
preceding surface entrance event to a different output. This is not
necessarily the case. Consider moving the window from monitor 1, to
monitor 1-2, and then back to 1 again. mpv gets the entrance event to
monitor 2 and sets that as the current output to work off of. Then when
you move back to only monitor 1, it removes monitor 2 from the current
output. However, monitor 1 is not updated again as the current output
because there is not a new surface entrance event in this case (the
window never left). So the numbers that mpv's core is using are
incorrect and for the wrong monitor. Luckily, we already keep track of
what outputs the mpv surface is currently on no matter how many there
are so it is simply a matter of setting current output again in the
leave event if we have a different output that has the mpv surface.
Ref: https://github.com/swaywm/sway/issues/7932
Before 3250f6e447, secondary subtitles
didn't work properly with sd_lavc at all. They would render but be in
the same position as the primary subtitles. sd_ass used SD_CTRL_SET_TOP
to specifically place secondary subtitles in a different spot, but it
was unused by sd_lavc. With that above mentioned commit, it became
possible to distinguish between the position of primary and secondary
subtitles via mpv's option system. sd_lavc was missed however because at
the time we simply didn't realize this could work and was actually
simple. With some subsequent refactoring that happened later, the fix is
to just use the correct sd->order when accessing the shared subtitle
options instead of hard coding 0. Fixes#13440.
Move common_prefix_length() and related functions before the first call
to common_prefix_length(). It works now because it's global but if we
ever make all functions local for consistency it will stop working.
When mp_output_chain_update_filters() fails, talloc_free() is called on
each mp_user_filter. But because the structure doesn't have a talloc
destructor, the args aren't freed, resulting in stale references.
Fix this by calling the destructor of the wrapped filter instead.
Deinterlacing required that the user set it on/off themselves, but we
actually have handy flags for detecting if a frame is interlaced. So
it's pretty simple to make an auto option using that. Unfortunately,
life is not quite that simple and there are known cases of false
positives from the ffmpeg flags so we can't make auto the default value.
However, it still may have some utility for some people, and the
detection could potentially be improved upon later. Closes#10358.
This reverts commit be0a979a0b.
The list of images codecs is no longer used by demux_mkv.c because
26a51464b6 made it check the number of blocks instead to not misdetect
animations in image codecs, so move it back to demux_mf.c since it is
its only user, so it is easier to understand how it is used, keeping the
jxl addition from e9d0a31dfe.
vo_rpi and its related code has pretty much historically been a
disaster in mpv. The build regularly gets broken and since nobody uses
it, it takes months for anyone to notice. There was also that time where
fullscreen was broken for about a year and a half. Also building in waf
was entirely broken for about a couple of years or so due to mysterious
reasons no one ever figured out (meson magically fixed it).
Anyways, once again the build is broken due to rpi being forgotten about
again, but instead of pretending to support this crap. Just drop it all.
Nowadays, mmal hwdec is a relic since these devices are better off using
the v4l2m2m ffmpeg fork instead which actually uses KMS properly. RPI 1
and 2 probably can't do this and will remain broken but oh well blame
Broadcom for being special snowflakes and not using standard APIs (my
rockpro worked out of the box; just saying). RPI 2 is nearly 10 years
old anyways, so I think you can afford a new SBC by now. If we were
nicer, there would be a deprecation period, but this is broken in the
last major release anyway so too late.
Closes#13402.
As mentioned in [0] the suffix "_locked" would have been the appropriate
naming in line with similar uses inside mpv.
See `mp_abort_recheck_locked()`, `mp_abort_trigger_locked()`,
`retrigger_locked()`, `wakeup_locked()`...
[0] https://github.com/mpv-player/mpv/pull/12811#discussion_r1477518525
When adding things like brightness or gamma, the video obviously needs a
redraw if paused. This happened to work in the normal case because the
OSD notification triggered a redraw, but if you use no-osd the picture
won't change. Fix this by adding another option flag, UPDATE_VIDEO, and
simply signalling we want a redraw. This gets handled along with the
normal osd redrawing check in the playloop so something like "no-osd add
gamma 1" actually works.
df764bc0c3926ff06902c2ed8609ed7633408550 and
c82c55b4b9d4015ba79fb36170defb328563cdea blindly converted the units for
this VO since neither of us actually have the hardware/setup to test the
VO. Well it was not actually correct (maybe just one was wrong or both
who knows) since vo_vdpau using timing very differently than all the
other VOs and no one reported on it until just now. Anyways, just apply
this random patch from @DanOscarsson which apparently works for him and
call it a day. Fixes#13397.
This can be used to auto reload the input configuration file, e.g. in
vim:
autocmd BufWritePost ~/.config/mpv/input.conf silent !echo load-input-conf %:p | socat - /tmp/mpvsocket
Partially fixes#6362.
Additionally this can be used as a replacement for deprecated input
sections if they are ever actually removed. For example, if you want to
define different bindings for images, you can load-input-conf an
input.conf for images, and load the original again when switching to a
video. Though currently you would have to redefine builtin bindings that
were overwritten with image ones in the default input.conf.
Unlike set include mpv.conf, this works after playback has started. It
can be used to auto reload the configuration, e.g. in vim:
autocmd BufWritePost ~/.config/mpv/mpv.conf silent !echo load-config-file %:p | socat - /tmp/mpvsocket
Partially fixes#6362.
Since the scroll event handler is moved to wl_pointer_frame, version 5 of
wl_seat is required. Warn that scrolling is broken if the compositor
doesn't support that verison.
Commit f54ad8eb05 broke high resolution
scrolling because one logical mouse click is generated for every scroll
event, no matter the magnitude. This makes scrolling on trackpad way
too fast.
Revert the axis scaling change in that commit and clamp the resulting
value between -1 and 1 to make sure mouse wheel scrolling works as
intended on compositors which send a value larger than 10 for these events.
Some X11 window managers support controlling the title bar independently
from other window decorations with _MOTIF_WM_HINTS. This allows hiding
the title bar while keeping other decorations like the resizing borders.
Let mpv respect the --title-bar option on X11 so --no-title-bar can hide
the title bar only like on win32.
4709a94aec along with some related commits
added a way to detect image codecs embedded into mkv streams that
weren't tagged with attached picture (arguably a broken file anyways,
but maybe not the worst thing to workaround). Unfortunately, this has
some false positives particularly with mjpeg playback. So, as usual,
revert and rewrite. Instead, we can probe the file and count blocks in
the stream. If the video stream has only 1 block and 1 timecode, then
assume it's a still image.
Save the cache to separate files to avoid loading/saving a huge combined
libplacebo.cache. This approach allows the saving of only new cache
objects and avoids resaving the entire cache, especially even if only a
tiny change was made.
This commit improves the cold start time of mpv and avoids saving data
when it's not necessary.
Number of changes were made:
- each cached object is saved in its own file
- cache files are prefixed with the name of cached object
- cache directory is cleaned on each uninit
- the least recently used cache files are removed if cumulative cache
size is above limit
- files used in the recent 24 hours are not removed to allow changes
to mpv.conf without worrying about the cache being removed during
experimentation
- shader cache size limit is set to 128 MiB
- icc cache size limit is set to 1.5 GiB
- cache objects are loaded/saved as needed
This commit eliminates the runtime performance penalty associated with
the size cache. While we continue to maintain the cache limit to prevent
retaining stale objects, mpv now only loads a small subset of files that
are currently required for playback, instead of loading all files.
