Should we actually get into trouble for unproper handling of
frame-based subtitle formats, this might be the simplest way to
work this around. Also is a bit more intuitive than -subfps, which
might use an unknown, misdetected, or non-sense video FPS.
Still pretty silly, though.
Before this commit, SRT demuxing and display actually happened to work
on Libav. But it was using the libavcodec srt converter (which is
essentially unmaintained in Libav), and timing postprocessing didn't
work. For some background explanations see sd_lavf_srt.c.
Until now, timing and charset recoding postprocessing was applied on
packets as they were output by the demuxer, and then passed to the
decoders. Make it so that postprocessing can happen after some decoders
in special situations.
This code was once part of subreader.c, then traveled to libass, and now
made its way back to the fork of the fork of the original code, MPlayer.
It works pretty much the same as subreader.c, except that we have to
concatenate some packets to do auto-detection. This is rather annoying,
but for all we know the actual source file could be a binary format.
Unlike subreader.c, the iconv context is reopened on each packet. This
is simpler, and with respect to multibyte encodings, more robust.
Reopening is probably not a very fast, but I suspect subtitle charset
conversion is not an operation that happens often or has to be fast.
Also, this auto-detection is disabled for microdvd - this is the only
format we know that has binary data in its packets, but is actually
decoded to text. FFmpeg doesn't really allow us to solve this properly,
because a) the input packets can be binary, and b) the output will be
checked whether it's UTF-8, and if it's not, the output is thrown away
and an error message is printed. We could just recode the decoded
subtitles before sd_ass if it weren't for that.
demux_libass.c allows us to make subtitle format detection part of the
normal file loading process. libass has no probe function, but trying to
load the start of a file (the first 4 KB) is good enough. Hope that
libass can even handle random binary input gracefully without printing
stupid log messages, and that the libass parser doesn't accept too many
non-ASS files as input.
This doesn't handle the -subcp option correctly yet. This will be fixed
later.
subreader.c (before this commit renamed to demux_subreader.c) was
special cased to the -sub option. The plan is using the normal demuxer
codepath for all subtitle formats (so we can prefer libavformat demuxers
for most formats).
There are some subtle changes. The probe size is restricted to 32 KB
(instead of unlimitted + giving up after 100 lines of input). For
formats like MicroDVD, the video FPS isn't used anymore, because it's
not available on the subtitle demuxer level. Instead, hardcode it to
23.976 FPS (libavformat seems to do the same). The user can probably
still use -sub-fps to fix the timing. Checking the file extension for
".utf"/".utf8"/".utf-8" is simply removed (seems worthless, was in the
way, and I've never seen this anywhere).
Actually check the newly added text for whitespace, and not the
uninitialized buffer after it. Also, if an even is only whitespace,
don't add it at all.
sd_ass contains some code that treats subtitle events with duration 0
specially, and adjust their duration so that they will disappear with
the next event.
This is most likely not needed anymore. Some subtitle formats allow
omitting the duration so that the event is visible until the next one,
but both subreader.c as well as libavformat subtitle demuxers already
handle this.
Subtitles embedded in mp4 files (movtext) used to trigger this code. But
these files appear to export subtitle duration correctly (at least
libavcodec's movtext decoder is using this assumption). Since commit
6dbedd2 changed demux_lavf to actually copy the packet duration field,
the code removed with this commit isn't needed anymore for correct
display of movtext subtitles. (The change in sd_movtext is for dropping
empty subtitle events, which would now be "displayed" - libavcodec does
the same.)
On the other hand, this code incorrectly displayed hidden events in .srt
subtitles. See for example the first event in SubRip_capability_tester.srt
(part of FFmpeg's FATE). These intentionally have a duration of 0, and
should not be displayed. (As of with this commit, they are still
displayed in external .srt subs because of subreader.c hacks.)
However, we can't be 100% sure that this code is really unneeded, so
just comment the code. Hopefully it can be removed if there are no
regressions after some weeks or months.
Currently, we are filtering libavformat style ASS packets by checking
whether they are prefixed "Dialogue: ". Unfortunately, comment packets
are demuxed too. These start with "Comment: ", so they are not caught.
Change the filtering, and use the codec ID instead. libavformat uses
"ssa" as codec ID for ASS subtitles, while mpv uses "ass". Also, at
least FFmpeg will change the ASS packet format to the same format mpv
and Matroska use, and identify these with "ass" as codec ID, so this is
works out nicely.
Some of this (fixing timing) is now done in dec_sub.c (although it's
not active for subreader.c code yet - this will be fixed when
subreader.c subs are read through a demuxer wrapper).
Another reason to remove this is that this code doesn't do much good
anymore. libass does handle overlap, and trying to fold overlapping
lines into single subtitle events will prevent libass from handling
this properly.
This fixes the -subfps option (which unfortunately is still useful),
and fixes minor annoying timing errors (which unfortunately still
happen).
Note that none of these affect ASS or image subtitles. ASS is specially
handled: libass loads subtitles as ASS_Track. There are no actual
packets passed around, and sd_ass just uses the ASS_Track.
Disable the --sub-no-text-pp option. It's misleading now and always was
completely useless.
If a subtitle is external, read it completely and add all subtitle
events in advance when the subtitle track is selected. This is done
for text subtitles only. (Note that subreader.c and subtitles loaded
with libass are different and don't have anything to do with this
commit.)
Seems like a completely unnecessary complication. Instead, always add a
1 byte padding (could be extended if a caller needs it), and clear it.
Also add some documentation. There was some, but it was outdated and
incomplete.
This function was called in various places. Most time, it was used
before a seek. In other cases, the purpose was apparently resetting
the EOF flag. As far as I can see, this makes no sense anymore. At
least the stream_reset() calls paired with stream_seek() are completely
pointless. A seek will either seek inside the buffer (and reset the
EOF flag), or do an actual seek and reset all state.
Both converters can output \pos and deal with font sizes, so they assume
a specific script resolution (PlayResX/PlayResY). The implicit
assumption was that a specific resolution was guaranteed. The
MP_ASS_FONT_PLAYRESY constant is connected to this.
Better make it explicit, so that the implicit dependency on
MP_ASS_FONT_PLAYRESY is removed. (Unfortunately, libavcodec sub
converters still don't set PlayResX/PlayResY explicitly, so the value
set by that constant can't be declared as arbitrary yet.)
PlayResY=288 is most likely the SSA natural script resolution (or
something like this?), as well as the libass and VSFilter default.
PlayResX=384 is the fallback value set by libass if PlayResY is set to
288, and PlayResX is unset.
The default style is added by mp_ass_default_track(), but not by
ass_new_track(). Considering this, the previous condition at this point
didn't make much sense anymore: the actual (converted) subtitle format
doesn't matter much for what styling should be applied. What matters is
if the subtitle was originally ASS, or if it was converted to it.
Change the code such that the default style is added if there aren't
any, even after reading sub extradata. (The extradata contains the ASS
header, including the style section.) This might change behavior with
scripts that don't define any styles. The change is either with this
commit or with an earlier commit in this branch, depending on the
situation - there are multiple places where default styles are added
in libass API functions, and it's all a big mess.
Other than with very old or broken files (where different behavior
doesn't matter much), the current code should be pretty safe, though.
Audio and video had their own (very similar) functions to initialize an
AVPacket (ffmpeg's packet struct) from a demux_packet (mplayer's packet
struct). Add a common function for these.
Also use this function for sd_lavc_conv. This is actually a functional
change, as some libavfilter subtitle demuxers add weird out-of-band
stuff as side-data.
When e.g. converting SRT to ASS, we certainly don't want them stretched
by video aspect ratio, even if that's necessary for native ASS
subtitles.
Annoying weird details...
This mirrors commit "sub: remove check_duplicate_plaintext_event()".
That code was basically duplicated. In general, this code is still
needed when doing conversion during demuxing (mostly because you can
seek during demuxing, which will cause duplicate events by replaying).
Normally, libavcodec subtitle converters will output a style header like
this as part of the extradata:
Style: Default,Arial,16,&Hffffff,&Hffffff,&H0,&H0,0,0,0,1,1,0,2,10,10,10,0,0
We don't want that, so use some bruteforce to get rid of them.
Otherwise this could happily open decoders for image subtitles or even
audio/video decoders. AV_CODEC_PROP_TEXT_SUB is a preprocessor symbol,
but it's still better to detect this properly instead of using #ifdef,
because these flags might as well be changed into enums sooner or later.
This allows using some formats that were not supported until now, like
WebVTT.
We still prefer the internal subtitle reader (subreader.c), because
1. Libav, and 2. random things which we probably want to keep, such as
control over formatting, codepage stuff, or various mysterious
postprecessing done in that code.
This means subassconvert.c is split in sd_srt.c and sd_microdvd.c. Now
this code is involved in the sub conversion chain like sd_movtext is.
The invocation of the converter in sd_ass.c is removed.
This requires some other changes to make the new sub converter code work
with loading external subtitles. Until now, subtitles loaded via
subreader.c was assumed to be in plaintext, or for some formats, in ASS
(except in -no-ass mode). Then these were added to an ASS_Track. Change
this so that subtitles are always in their original format (as far as
decoders/converters for them are available), and turn every sub event
read by subreader.c as packet to the dec_sub.c subtitle chain.
This removes differences between external/demuxed and -ass/-no-ass code
paths further.
Add a basic infrastructure for subtitle converters. These converters
work sort-of like decoders, except that they produce packets instead
of subtitle bitmaps. They are put in front of actual decoders.
Start with sd_movtext. 4 lines of code are blown up to a 55 lines file,
but fortunately this is not going to be that bad for the following
converters.
Make the sub decoder stuff independent from sh_sub (except for
initialization of course). Sub decoders now access a struct sd only,
instead of getting access to sh_sub. The glue code in dec_sub.c is
similarily independent from osd.
Some simplifications are made. For example, the switch_id stuff is
unneeded: the frontend code just has to make sure to call osd_changed()
any time subtitles are switched.
This is also preparation for introducing subtitle converters. It's much
cleaner to completely separate demuxer header/renderer glue/decoders
for this purpose, especially since sub converters might completely
change how demuxer headers have to be interpreted.
Also pass data as demux_packets. Currently, this doesn't help much, but
libavcodec converters might need scary stuff like packet side data, so
it's perhaps better to go with passing packets.
Subtitle files are opened in mplayer.c, not using the demuxer
infrastructure in general. Pretend that this is not the case (outside of
the loading code) by opening a pseudo demuxer that does nothing. One
advantage is that the initialization code is now the same, and there's
no confusion about what the difference between track->stream,
track->sh_sub and mpctx->sh_sub is supposed to be.
This is a bit stupid, and it would be much better if there were proper
subtitle demuxers (there are many in recent FFmpeg, but not Libav). So
for now this is just a transition to a more proper architecture. Look
at demux_sub like an artifical limb: it's ugly, but don't hate it - it
helps you to get on with your life.
This was broken with 84829a4 "Merge branch 'osd_changes' into master".
The new OSD/subtitle code never respected the --sub-forced-only option,
and the old code containing the code for this was removed in fd5c4a1.
This unifies the subtitle rendering path. Now all subtitle rendering
goes through sd_ass.c/sd_lavc.c/sd_spu.c.
Before that commit, the spudec.h functions were used directly in
mplayer.c, which introduced many special cases. Add sd_spu.c, which is
just a small wrapper connecting the new subtitle render API with the
dusty old vobsub decoder in spudec.c.
One detail that changes is that we always pass the palette as extra
data, instead of passing the libdvdread palette as pointer to spudec
directly. This is a bit roundabout, but actually makes the code simpler
and more elegant: the difference between DVD and non-DVD dvdsubs is
reduced.
Ideally, we would just delete spudec.c and use libavcodec's DVD sub
decoder. However, DVD playback with demux_mpg produces packets
incompatible to lavc. There are incompatibilities the other way around
as well: packets from libavformat's vobsub demuxer are incompatible to
spudec.c. So we define a new subtitle codec name for demux_mpg subs,
"dvd_subtitle_mpg", which only sd_spu can decode.
There is actually code in spudec.c to "assemble" fragments into complete
packets, but using the whole spudec.c is easier than trying to move this
code into demux_mpg to fix subtitle packets.
As additional complication, Libav 9.x can't decode DVD subs correctly,
so use sd_spu in that case as well.
This was once needed to handle subtitle packages coming from a demuxer,
where seeking back might repeat previous events. This doesn't happen
anymore, and this code is used to convert complete files. So if there
are any duplicate lines, they must have been duplicated in the file,
and the old subtitle renderer would have shown them twice as well.
Today checking for duplicate events happens in sd_ass.c (and has been
for a while). There's no reason to keep this code, and it actually
causes trouble. Loading big subtitle files is extremely slow because
this makes adding n subtitles O(n^2).
The -no-ass switch used to disable any use of libass for text subtitles.
This is not really the case anymore, because libass is now always
involved when rendering text. The only remaining use of -no-ass is
disabling styling or showing subtitles on the terminal. On the other
hand, the old subtitle rendering path is a big reason why the subtitle
code is still a big mess with an awful number of obscure special cases.
In order to simplify it, remove the old subtitle rendering code, and
always go through sd_ass.c. Basically, we use ASS_Track as central data
structure for storing text subtitles instead of struct sub_data. This
also makes libass mandatory for all text subs, even if they are printed
to the terminal in -no-video mode. (We could add something like sd_text
to avoid this, but it's not worth the trouble.)
struct sub_data and subreader.c are still around, even its ASS/SSA
reader. But struct sub_data is freed right after converting it to
ASS_Track. The internal ASS reader actually can handle some obscure
cases libass can't, like files encoded in UTF-16.
These were found by the cppcheck and scan-build static analyzers. Most
of these aren't interesting (the 2 previous commits fix some interesting
cases found by these analyzers), and they don't nearly fix all warnings.
(Most of the unfixed warnings are spam, things MPlayer never cared
about, or false positives.)
"%[,.:]" conversion was used with a buffer that could be shorter than
the matched string. Suppress assignment of the conversion since the
value wasn't used anyway, and also limit match length to 1 as it
doesn't look like the intent was to match longer runs of the
characters.
Merged from mplayer2 commit 5cb9aac. Note that the other half of the
mplayer2 commit is already part of the mpv commit d98e61e. (I'm not
sure why. The mplayer2 commit date precedes mpv's, but was pushed long
after the mpv change was pushed; either one of the dates is wrong, or
we did the same work twice - in that case, thanks a lot...)
This broke .srt subtitles on gcc-4.8. The breakage was relatively
subtle: it set all hour components to 0, while everything else was
parsed successfully.
But the problem is really that sscanf wrote 1 byte past the sep
variable (or more, for invalid/specially prepared input). The %[..]
format specifier is unbounded. Fix that by letting sscanf drop the
parsed contents with "*", and also make it skip only one input
character by adding "1" (=> "%*1[...").
The out of bound write could easily lead to security issues.
Also, this change makes .srt subtitle parsing slightly more strict.
Strictly speaking this is an unrelated change, but do it anyway. It's
more correct.
The old OSD font was a PostScript Type 1 font. Convert it to OpenType
to work around a fontconfig bug [1]. OpenType is a more modern format,
and the font file is quite a bit smaller, so this is actually a nice
change.
The conversion was done by opening the font with fontforge and saving
it as OpenType (CFF). fontforge showed a warning when doing this:
The font contains errors.
Self Intersecting
Bad Private Dictionary
These seem to be harmless.
[1] https://bugs.freedesktop.org/show_bug.cgi?id=63922
Usually SubRip files are not expected to contain ASS override tags,
but unfortunately these files seem to become more common. Example from
a real file:
1
00:00:00,800 --> 00:00:15,000
{\an8}本字幕由 {\c&H26F4FF&}ShinY {\c&HFFAE1A&}深影字幕组{\c&HFFFFFF&} 原创翻译制作
subassconvert.c escaped '{', so that libass displayed the above line
literally.
Try to apply a simple heuristic to detect whether '{' is likely to
start an ASS tag: if the string starts with '{\', and there is a
closing '}', assume it's an ASS tag, otherwise escape the '{' properly.
If it's a likely ASS tag, it's passed through to libass.
The end result is that the above script is displayed in color, while at
the same time legitimate uses of '{' and '}' should work fine. We assume
that nobody uses {...} for commenting text in SubRip files. (This kind
of comment is popular and legal in ASS files, though.)
Get rid of the 1-char subtitle type field. Use sh_stream->codec instead
just like audio and video do. Use codec names as defined by libavcodec
for simplicity, even if they're somewhat verbose and annoying.
Note that ffmpeg might switch to "ass" as codec name for ASS, so we
don't bother with the current silly "ssa" name.
These require bleeding edge libass (latest git version), and will be
ignored otherwise.
I'm not sure about the blur factor and scaling. The ASS/VSFilter
semantics for blur scaling are a bad mess. Might require further
investigation.
Drawing the bar with vector drawings (instead with characters from the
OSD font) offers more flexibility and looks better. This also adds
chapter marks to the OSD bar, which are visible as small triangles on
the top and bottom inner border of the bar.
Change the default position of the OSD bar below the center of the
screen. This is less annoying than putting the bar directly into the
center of the view, where it obscures the video. The new position is
not quite on the bottom of the screen to avoid collisions with
subtitles.
The old centered position can be forced with ``--osd-bar-align-y=0``.
Also make it possible to change the OSD bar width/height with the new
--osd-bar-w and --osd-bar-h options.
It's possible that the new OSD bar renders much slower than the old
one. There are two reasons for this: 1. the character based bar
allowed libass to cache each character, while the vector drawing forces
it to redraw every time the bar position changes. 2., the bar position
is updated at a much higher granularity (the bar position is passed
along as float instead of as integer in the range 0-100, so the bar
will be updated on every single video frame).
The old names have been deprecated a while ago, but were needed for
supporting older ffmpeg/libav versions. The deprecated identifiers
have been removed from recent Libav and FFmpeg git.
This change breaks compatibility with Libav 0.8.x and equivalent
FFmpeg releases.
Removes almost every global variabel in vo.h and puts them in a special struct
in MPOpts for video output related options.
Also we completly remove the options/globals pts and refresh rate because
they were unused.
OPT_BASE_STRUCT defines which struct the OPT_ macros (like OPT_INT etc.)
reference implicitly, since these macros take struct member names but no
struct type. Normally, only cfg-mplayer.h should need this, and other
places shouldn't be bothered with having to #undef it.
(Some files, like demux_lavf.c, still store their options in MPOpts. In
the long term, this should be removed, and handled like e.g. with VO
suboptions instead.)
Recent changes to the OSD code made vo_caca crash when showing OSD.
Since this is a joke VO (== I'd rather not waste my time with it),
remove the OSD support. It wasn't that great anyway.
Seeks can be performed with OSD bar invisible (e.g. "osd-msg seek ..."
command), and then an already visible bar won't be updated. But the bar
will stick around until the OSD text is hidden. This is confusing, so
change it that the bar is updated. (Making the bar disappear on such
seeks would require much more changes, so we're lazy and go with this
commit.)
Image areas with subtitles are upsampled to 4:4:4 in order to render
the subtitles (makes blending easier). Try not to copy the Y plane on
upsampling. The libswscale API requires this, but this commit works it
around by scaling the chroma planes separately as AV_PIX_FMT_GRAY8. The
Y plane is not touched at all. This is done for 420p8 only, which is the
most commonly needed case. For other formats, the old way is used.
Seems to make ASS rendering faster about 15% in the setup I tested.
Allocate it even if it's needed. The actually done work is almost the
same, except that the code is a bit simpler. May need more memory at
once for RGB subs that use more than one part, which is rare.
In order to support OSD redrawing for vo_xv and vo_x11, draw_bmp.c
included an awkward "backup" mechanism to copy and restore image
regions that have been changed by OSD/subtitles.
Replace this by a much simpler mechanism: keep a reference to the
original image, and use that to restore the Xv/X framebuffers.
In the worst case, this may increase cache pressure and memory usage,
even if no OSD or subtitles are rendered. In practice, it seems to be
always faster.
It's not easy to tell whether the OSD/subs are empty, or if something is
drawn. In general you have to use osd_draw() with a custom callback. If
nothing is visible, the callback is never invoked. (The actual reason
why this is so "hard" is the implementation of osd_libass.c, which
doesn't allow separating rendering and drawing of OSD elements, because
all OSD elements share the same ASS_Renderer.)
To simplify avoiding copies, make osd_draw_on_image() instead of the
caller use mp_image_make_writeable(). Introduce osd_draw_on_image_p(),
which works like osd_draw_on_image(), but gets the new image allocation
from an image pool. This is supposed to be an optimization, because it
reduces the frequency of large allocations/deallocations for image data.
The result of this is that the frequency of copies needed in conjunction
with vf_sub, screenshots, and vo_lavc (encoding) should be reduced.
vf_sub now always does true pass-through if no subs are shown.
Drop the pts check from vf_sub. This didn't make much sense.
Even though #ifdef ACCURATE is removed, the result should be about the
same. The fallback is only used by packed YUV formats (YUYV, NV12), and
doing 16 bit for them instead of 8 bit is not useful.
A side effect is that Y8 (gray) is not converted drawing subs, and for
alpha formats, the alpha plane is not removed. This means the number of
planes after upsampling can be 1-4 (1: gray, 2: gray+alpha, 3: planar,
4: planar+alpha). The code has to be adjusted accordingly to work on the
color planes only. Also remove the workaround for the chroma shift 31
hack.
mp_image_alloc_planes() allocated images with minimal stride, even if
the resulting stride was unaligned. It was the responsibility of
vf_get_image() to set an image's width to something larger than
required to get an aligned stride, and then crop it. Always allocate
with aligned strides instead.
Get rid of IMGFMT_IF09 special handling. This format is not used
anymore. (IF09 has 4x4 chroma sub-sampling, and that is what it was
mainly used for - this is still supported.) Get rid of swapped chroma
plane allocation. This is not used anywhere, and VOs like vo_xv,
vo_direct3d and vo_sdl do their own swapping.
Always round chroma width/height up instead of down. Consider 4:2:0 and
an uneven image size. For luma, the size was left uneven, and the chroma
size was rounded down. This doesn't make sense, because chroma would be
missing for the bottom/right border.
Remove mp_image_new_empty() and mp_image_alloc_planes(), they were not
used anymore, except in draw_bmp.c. (It's still allowed to setup
mp_images manually, you just can't allocate image data with them
anymore - this is also done in draw_bmp.c.)
Setting the size of a mp_image must be done with mp_image_set_size()
now. Do this to guarantee that the redundant fields (like chroma_width)
are updated consistently. Replacing the redundant fields by function
calls would probably be better, but there are too many uses of them,
and is a bit less convenient.
Most code actually called mp_image_setfmt(), which did this as well.
This commit just makes things a bit more explicit.
Warning: the video filter chain still sets up mp_images manually,
and vf_get_image() is not updated.
Before this commit, the --osd-* options (like --osd-font-size etc.)
configured both the OSD and subtitle font. Make them separate, and add
--sub-text-* options (like --sub-text-size etc.). Now --osd-* affects
the OSD font only, and --sub-text-* unstyled text subtitles only.
The warnings in demux_mpg were silenced by additional no-operation
casts.
A variable in ass_mp was used only for some versions of libass; now the
declaration is in that version #ifdef too to avoid a compiler warning.
Add `mp_find_config_file` to search different known paths and use that in
ass_mp to look for the fontconfig configuration file.
Some incidental changes spawned by this feature where:
* Buffer allocation for the strings containing the paths is now performed
with talloc. All of the allocations are done on a NULL context, but it still
improves readability of the code.
* Move the OSX function for lookup inside of a bundle: this code path was
currently not used by the bundle generated with `make osxbundle`. The plan
is to use it again in a future commit to get a fontconfig config file.
This allows to use a fontconfig fonts.conf that is customized for mpv. The
configuration file is assumed to be located at `~/.mpv/fonts.conf`. If not
found the default fcontconfig config file is used.
Keep the currently displayed subtitles even when the user cycles through
subtitle tracks, and the subtitle is decoded by libavcodec (such as
vobsubs). Do this by not clearing the subtitles on reset(). reset() is
also called on seek, so check the start PTS whether the subtitle should
really be displayed (there's already an end PTS). Note that sd_ass does
essentially something similar.
The existing code has checks for whether the PTS reported by the demuxer
is invalid (MP_NOPTS_VALUE). I don't know under what circumstances this
can happens, so fall back to the old behavior if the PTS is invalid.
ffmpeg recently added a demuxer that can read vobsubs (pairs of .sub and
.idx files). Get rid of the internal vobsub reader, and use the ffmpeg
demuxer instead.
Sneak in an unrelated manpage change (autosub default).
libavformat demuxes ass subtitles in a broken way, that forces the
player to throw away all subtitle events received so far. See mplayer
svn commit 31293.
The subreader.c ASS parser (used when playing an external ASS subtitle
file with --no-ass for "plaintext" display) hardcodes dialogue line
syntax instead of correctly reading it from the "Format: " line in the
file, but tried to support a varying amount of fields by guessing
where the text field (which should be last) begins. This guessing code
was buggy in many ways. Remove it and hardcode skipping 9 commas
before the text field, which should work for most files. I don't
consider the --no-ass case important enough to implement correct
parsing now. Also fix the code removing formatting tags, which failed
to remove the second in a pair of two consecutive tags.
Conflicts:
sub/subreader.c
Merged from mplayer2 commit 91f516. Essentially reverts d5b964.
Remove the options --utf8 and --unicode which had no effect any more
(what they once did should be doable with --subcp). The only use of
corresponding variables left in code was subreader.c code using
sub_utf8 as a flag indicating whether iconv conversion was active.
Change the code to test the existence of iconv context instead.
Conflicts:
DOCS/man/en/options.rst
core/cfg-mplayer.h
sub/sub.c
sub/sub.h
sub/subreader.c
Merged from mplayer2 commit ea7311.
Note: --unicode was already removed
Based on a patch by qyot27. Add the missing parts in mp_get_chroma_shift(),
which allow allocation of such images, and which make vo_opengl
automatically accept the new formats. Change the IMGFMT_IS_YUVP16_LE/BE
macros to properly report IMGFMT_444P14 as supported: this pixel format
has the highest numerical bit width identifier (0x55), which is not
covered by the mask ~0xfc. Remove 1 bit from the mask (makes it 0xf8) so
that IMGFMT_IS_YUVP16(IMGFMT_444P14) is 1. This is slightly risky, as
the organization of the image format IDs (actually FourCCs + mplayer
internal IDs) is messy at best, but it should be ok.
The following HEX formats are now parsed correctly: `#RRGGBB`, `RRGGBB`.
Moreover this implementation doesn't show the HTML on screen if the input
color is not recognized. A warning is still displayed in the terminal.
MPlayer/mplayer2 still show DVD subtitles in gray. Depending on who you
ask, this can be considered a bug or a feature. Include rendering in
gray as explicit feature, so the user can decide what is better.
This affects all indexed sub bitmaps entering the OSD rendering path.
Currently, this means all image subs are affected by this option, but
nothing else.
Apparently the -spugauss option was popular. The code originally
implementing this is gone (scaler stuff in spudec.c). Reimplement it
using libswscale to scale and blur image subtitles if the --sub-gauss
option is set.
The code does some rather lazy padding to allow the blur to spread
pixels past the original image bounding box. (This problem exists with
normal bilinear scaling too, but is barely noticable.)
Technically, this doesn't just blur subtitles, but anything RGBA (or
indexed) that enters the OSD rendering path. But only image subtitles
produce these OSD formats currently, so no explicit check is done to
prevent blurring in other cases.
As pointed out in commit ed01df, the quality loss due to frequent
conversion between RGB and YUV is too much when drawing OSD and
subtitles.
Fix this by staying in the same colorspace when drawing subtitles.
Render directly to RGB, without converting to YUV first.
The bad thing about packed RGB is that there are many pixel formats,
which would all require special code for blending. It's also completely
incompatible to planar YUV. Use planar RGB instead, which allows us to
reuse all code originally written for planar YUV. The only thing that
needs to be changed is the color conversion in the libass case. (In
exchange for simpler code, the image has to be copied, but this is
still much better than converting to YUV.)
Unfortunately, libswscale doesn't support planar RGB output. Add a hack
to sws_utils.c to handle conversion to planar RGB. In the common case,
when converting 32 bit per pixel RGB, calling swscale can be avoided
entirely.
The change in mp_image.c is needed to allocate GBRP images correctly.
(The issue with vo_x11 could be easily solved by always backing up the
same bounding box as the bitmap drawing RGB<->YUV conversion does, but
this commit is probably the better fix.)
Without this change, fields that can be sometimes empty and
sometimes not, such as the Effect field, are counted in an
inconsistent way. Since the number of fields is used to find
where the text starts, it leads to internal field arriving
on the video.
Bug reported anonymously on the users mailing list.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@35426 b3059339-0415-0410-9bf9-f77b7e298cf2
In order to improve performance, vo_xv didn't create a backup of the
video frame before drawing OSD and subtitles during normal playback. It
required the frontend to do frame stepping if it wanted to redraw the
OSD, but no backup of the video frame was available. (Consider the
following use case: enable the OSD permanently with --osd-level=3, then
pause during playback and do something that shows an OSD message. The
player will advance the video by one frame at the time the new OSD
message is first drawn.)
This also meant that taking a screenshot during playback with vo_xv
would include OSD and subtitles in the resulting image.
Fix this by always creating a backup before drawing OSD or subtitles.
In order to avoid having to create a full copy of the whole image frame,
introduce a complex scheme that tries to backup only the changed
regions.
It's unclear whether the additional complexity in draw_bmp.c for
backing up only the changed areas of the frame is worth it. Possibly
a simpler implementation would suffice, such as tracking only Y ranges
of changed image data, or even just copying the full frame.
vo_xv's get_screenshot() now always creates a copy in order not to
modify the currently displayed frame.
Make more aspects of the OSD font customizable. This also affects the
font used for unstyled subtitles (such as SRT), or when using the
--no-ass option. This adds back some customizability that was lost with
commit 74e7a1 (osd: use libass for OSD rendering).
Removed options:
--ass-border-color
--ass-color
--font
--subfont
--subfont-text-scale
Added options:
--osd-color
--osd-border
--osd-back-color
--osd-shadow-color
--osd-font
--osd-font-size
--osd-border-size
--osd-margin-x
--osd-margin-y
--osd-shadow-offset
--osd-spacing
--sub-scale
The font size is now specified in pixels as it would be rendered on a
window with a height of 720 pixels. OSD and subtitles are always scaled
with the window height, so specifying or expecting an absolute font
size doesn't make sense.
Such scaled pixel units are used to specify font border etc. as well.
(Note: the font size is directly passed to libass. How the fonts are
actually rasterized is outside of our control, but in theory ASS font
sizes map to "script" pixels and then are scaled to screen size.)
The default settings should be about the same, with slight difference
due to rounding to the new scales.
The OSD and subtitle fonts are not separately configurable. It has
limited use and would double the number of newly added options, which
would be more confusing than helpful. It could be easily added later,
should the need arise.
Other small details that change:
- ASS_Style.Encoding is not set to -1 for subs anymore
(assuming subs use VSFilter direction in -no-ass mode too)
- use a different WrapStyle for OSD
- ASS forced styles are not applied to OSD
Most of these are reimar fixing issues found by Coverity static
analyzer, and possibly some more cleanup commits independent from
this.
Since these commits are rather noisy, squash them all together.
Try to make code a bit clearer.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@35294 b3059339-0415-0410-9bf9-f77b7e298cf2
Conflicts:
audio/out/ao_alsa.c
Check the correct variable for NULL.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@35323 b3059339-0415-0410-9bf9-f77b7e298cf2
Remove pointless unreachable code (the loop condition already checks
the 0xff case).
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@35325 b3059339-0415-0410-9bf9-f77b7e298cf2
Fix typo that might have caused reading beyond the string end.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@35326 b3059339-0415-0410-9bf9-f77b7e298cf2
Do not needlessly use "long" types.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@35331 b3059339-0415-0410-9bf9-f77b7e298cf2
Use AV_RB32 to avoid sign extension issues and validate offset before using it.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@35332 b3059339-0415-0410-9bf9-f77b7e298cf2
Remove nonsense casts.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@35343 b3059339-0415-0410-9bf9-f77b7e298cf2
Fix crash in case sh_audio allocation failed.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@35348 b3059339-0415-0410-9bf9-f77b7e298cf2
Fix potential NULL dereference.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@35351 b3059339-0415-0410-9bf9-f77b7e298cf2
Conflicts:
libmpcodecs/ad_ffmpeg.c
Note: Slightly modified.
Fix malloc failure check to check the correct variable.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@35353 b3059339-0415-0410-9bf9-f77b7e298cf2
Avoid code duplication and pointless casts.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@35363 b3059339-0415-0410-9bf9-f77b7e298cf2
Conflicts:
stream/tv.c
Error out if an invalid channel list name was specified
instead of continuing and reading outside array bounds
all over the place.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@35364 b3059339-0415-0410-9bf9-f77b7e298cf2
Conflicts:
stream/tv.c
Make array "static const".
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@35365 b3059339-0415-0410-9bf9-f77b7e298cf2
Properly free resources even when encountering many
parse errors.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@35367 b3059339-0415-0410-9bf9-f77b7e298cf2
Conflicts:
parser-cfg.c
Avoid leaks in error handling.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@35380 b3059339-0415-0410-9bf9-f77b7e298cf2
Do not do sign comparisons on "char" type which can be both signed or unsigned.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@35381 b3059339-0415-0410-9bf9-f77b7e298cf2
Free cookies file data after parsing it.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@35382 b3059339-0415-0410-9bf9-f77b7e298cf2
http_set_field only makes a copy of the string, so we still need to
free it.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@35383 b3059339-0415-0410-9bf9-f77b7e298cf2
check4proxies does not modify input URL, so mark it const.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@35390 b3059339-0415-0410-9bf9-f77b7e298cf2
Remove proxy "support" from stream_rtp and stream_upd, trying
to use a http proxy for UDP connections makes no sense.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@35394 b3059339-0415-0410-9bf9-f77b7e298cf2
Conflicts:
stream/stream_rtp.c
stream/stream_udp.c
Add url_new_with_proxy function to reduce code duplication and memleaks.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@35395 b3059339-0415-0410-9bf9-f77b7e298cf2
Conflicts:
stream/pnm.c
stream/stream_live555.c
stream/stream_nemesi.c
stream/stream_rtsp.c
Fix off-by-one errors in file descriptor validity checks.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@35402 b3059339-0415-0410-9bf9-f77b7e298cf2
Remove pointless cast.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@35403 b3059339-0415-0410-9bf9-f77b7e298cf2
Abort when opening the file failed instead of calling
"write" with an invalid descriptor.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@35404 b3059339-0415-0410-9bf9-f77b7e298cf2
Remove pointless local variable.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@35411 b3059339-0415-0410-9bf9-f77b7e298cf2
Conflicts:
stream/http.c
Finish renaming directories and moving files. Adjust all include
statements to make the previous commit compile.
The two commits are separate, because git is bad at tracking renames
and content changes at the same time.
Also take this as an opportunity to remove the separation between
"common" and "mplayer" sources in the Makefile. ("common" used to be
shared between mplayer and mencoder.)
Extra checks to ensure we really do not write outside
array bounds.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@35313 b3059339-0415-0410-9bf9-f77b7e298cf2
Set pointers to NULL after free.
For the pal_image one it would have been possible
to leak the old pointer of the malloc for "image" failed.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@35303 b3059339-0415-0410-9bf9-f77b7e298cf2
Mostly pedantic bikeshedding issues.
Move some code around, so that the sub_bitmap_to_mp_images() function
can be split into two parts. This is better than having a big function
with many input and outputs, of which only half are used in each code
path.
Also, try to make code simpler by using a mp_rect type.
This controlled the generation of the palette for DVD subs if no palette
was found. The option name and description is confusing, and it was
probably barely useful. Remove the option, and hardcode the behavior to
the option's default value.
The code for this option attempted to emulate the old as-documented
behavior. It wasn't very good at it, and now that the old OSD code has
been removed, it's entirely pointless.
This removes the factor 1.7 with which --subfont-text-scale was
multiplied.
Most of these cased working when the OSD was switched to libass, or
didn't do anything even before that.
Also don't recursively include subreader.h in sub.h.
Normally, we can redraw the OSD any time. But some drivers don't support
OSD redrawing (vo_null etc.), or only "sometimes" (vo_xv). For that,
some additional logic is needed. Simplify that logic. This might also
fix subtle bugs with the OSD not updating or endless frame stepping in
unforseen corner cases.
Do this by adding a new flag, which tells whether the OSD should be
redrawn.
Remove some minor code duplication.
Remove VFCTRL_DRAW_OSD, VFCAP_EOSD_FILTER, VFCAP_EOSD_RGBA, VFCAP_EOSD,
VOCTRL_DRAW_EOSD, VOCTRL_GET_EOSD_RES, VOCTRL_QUERY_EOSD_FORMAT.
Remove draw_osd_with_eosd(), which rendered the OSD by calling
VOCTRL_DRAW_EOSD. Change VOs to call osd_draw() directly, which takes
a callback as argument. (This basically works like the old OSD API,
except multiple OSD bitmap formats are supported and caching is
possible.)
Remove all mentions of "eosd". It's simply "osd" now.
Make OSD size per-OSD-object, as they can be different when using
vf_sub. Include display_par/video_par in resolution change detection.
Fix the issue with margin borders in vo_corevideo.
Do this by replacing all the old vf_ass drawing code by draw_bmp.c.
Change sub.c to always use osd_draw() for the other OSD drawing
routines, and simplify the code a bit.
spudec.c subtitles (i.e. DVD subs) are now considered subtitles, and
are rendered by vf_ass, if that filter is inserted.
This fixes that vo_xv didn't display text subtitles correctly when
using anamorphic video. It didn't pass the aspect information to the
subtitle renderer. Also, try to render OSD correctly with respect to
aspect ratio settings: on vo_xv, the OSD is rendered into the video,
and needs to be "stretched" too when playing anamorphic video. When
the -monitorpixelaspect option is used, even with VOs such as vo_opengl
the OSD has to be rendered with that aspect ratio.
As preparation for future commits, replace the weird vsfilter_scale
value with a somewhat more sensible video_par member.
Also, struct mp_eosd_res is a better place for the aspect ratio
parameters, as OSD needs this too.
Use osd_draw_on_image() directly in vo_lavc, which fixes aspect ratio
issues as well.
Just to get rid of that conversion copy&pasted from the internet.
R and G are swapped for unknown reasons. Testing various subtitles
seem to yield the same results as VLC. The sub-bitmap renderers output
the correct colors. The colorspace conversion is used without problems
for vo_gl, vo_gl3 and vo_vdpau. The problem is most likely that
apparently, the DVD palette read from the subtitle track extradata is
converted to YUV using vobsub_palette_to_yuv(), and swapped in the
process. Or in other words, the YUV colors spu->global_palette are
encoded with R and G swapped.
Add some utility definition to csputils.c/h to make converting single
color values easier.
To ease changing all the VOs to the new OSD rendering, fallbacks,
conversions, support code etc. was left all over the code. Now that
all VOs have been changed, all that code is inactive. Remove it.
Strip down spudec.c. We don't need the old grayscale and scaling stuff
anymore. (Not removing spudec itself yet - I'm not confident that the
libavcodec DVD sub decoder is sufficient, and it would also require
some hacks to get DVD palette and resolution information from libdvdread
to libavcodec.)
The option --spuaa, --spualign, --spugauss were used with the old sub
scaling code, and don't do anything anymore.
draw_bmp.c uses libswscale, which has strict alignment requirements on
input images. Since imp_convert.c is currently the only producer of RGBA
sub-bitmaps, the overall code becomes easier if the alignment is done on
image allocation, rather than forcing draw_bmp.c to create an aligned
copy.
talloc doesn't align to 16 bytes, as required by libswscale. Apparently,
system malloc (glibc/Linux/32 bit) aligns to 8 bytes only, so talloc's
own code to align to 16 bytes is ineffective. Work around by using
mp_image to allocate the image.
The osd_draw_on_image() function renders the full OSD into the provided
image.
It uses the mp_draw_sub_bitmaps() function added in the previous commit
to do the actual work.
libswscale tends to overwrite the area between (w,y)-(0,y+1). It tries
to process multiple pixels at once, and if the memory past the last x
pixel is inside a SIMD operation, but still below the image stride, it
overwrites that data with black.
This happens with vo_x11 and 32 bit RGBA formats. The bug is visible as
black bar right of the subtitle bounding box. Fix by giving libswscale
more alignment. Then the "outside" pixels are inside, and are processed
normally instead of overwritten with black.
NOTE: we do not increase the alignment constant, because this is a
separate issue from pointer alignment. libavutil's av_malloc() wouldn't
actually satisfy the increased alignment either.
The \xFF escape is used internally to insert special OSD symbols (which
need a font change to the internal OSD font). There was potential for
breakage when \xFF was followed by \0, because then "in" would be
advanced past the string's end.
Normally this can't happen, as it would require invalid UTF-8 input
data. But we don't check input for UTF-8 validness, so there's a
potential issue here. Garbled output is ok on invalid UTF-8 input,
but crashing is not.
Make it more robust by checking for this.
append_utf8_buffer() reallocates the buffer passed to it, and returns
the new pointer.
This bug was originally introduced in mplayer2 when that project merged
mpv's osd_libass.c. That merge changed some minor things, including ASS
escape handling. When mpv used this better method of escape handling too
(commit 0ff7dd992f), the bug was duplicated.
Fix spudec change detection. The internal changed-flag was not reset
when retrieving indexed bitmaps, and subtitles were rescaled every
frame, even if they were not changing.
Simplify subtitle decoders by not requiring them to check whether the
passed-in screen size has changed. sd_lavc did this, and spudec would
have needed to do the same. Instead, leave this to the osd_object
force_redraw flag. Subtitle decoders (such as libass) can still signal
that only the positions of subtitles have changed, but making _all_
subtitle decoders do this just to deal with screen size changes is
worthless.
Crop subtitle images produced by spudec.c: instead of returning a frame-
sized bitmap (with possibly large transparent regions), return a cropped
down rectangle of the visible part only. The old spudec scaler code had
this as spudec_cut_image(), but it worked on the data converted to the
old OSD format only.
Move most code to setup the sub-bitmap from spudec_get_indexed() to
spudec_process_data(), so that cropping can be done every time a new
subtitle is decoded, instead of every frame.
Set the sub_bitmaps->scaled flag. Without it, vo_gl and vo_vdpau
produced ugly artifacts on the borders.
Fixes problems with ugly borders.
Note that at least in the DVD sub case, we could have just set all
transparent pixels to black to solve this.
vo_direct3d.c change untested, because mingw is a miserable pile of
crap.
