This was explictly coded to avoid the autoprobe way back when in
2015[1] with no real explanation. In theory, there shouldn't be any
issues allowing this. If a user runs mpv in tty, this is probably what
they actually want in most cases. Perhaps something strange happens on
nvidia, but it should just fail anyway during the autoprobe.
[1]: f757163058
As it turns out, js_try can throw if it runs out of try-stack
(without/before entering either the try part or the catch part).
If it happens, then C code which does allocation -> try will leak.
In mpv there were two places which do alloc and then try, one of
them as part of the autofree system. On both cases the leak is the
smallest possible (zero allocation) - talloc_new(NULL);
It's very unlikely to trigger - an autofree mpv API should be called
when the try-stack is exactly full, and our next try will throw
(and guaranteed to get caught at an outer level, but with a leak).
Fix that by doing the allocation inside the try block, so that if
try throws before it's entered then nothing got allocated/leaked.
Mujs internal code also has/had similar leaks, which are getting
fixed around this time (July 2021, post mujs 1.1.3).
[1] exhaust the try-stack or call-stack, whichever comes first:
function kaboom() { try { kaboom() } catch(e) {} }
--watch-later-options-remove doesn't accept multiple options, so split
the example.
Also suggest the more correct -clr to empty the list, and remove the
workaround to not print an error with --watch-later-options=
Previously, if a script bound the same key more than once to different
functions (without removing the older bindings first), then pressing
the key triggered any of the bound functions arbitrarily[1].
Now the newest binding for the same key is always the active one.
If the newest binding is then removed - the second-newest will become
active, etc. (same mechanism as before, except that the active key
was not always the newest).
[1] The order was implementation-defined, however `for (name in obj)'
happens to iterate. With mujs that's currently alhabetic order,
and name is from mp.add_[forced_]key_binding(key, name...)
or generated internally if name is not provided. So a binding with
higher alphabetic `name' value had priority over lower name value.
This allows configuring which options are saved by quit-watch-later.
Fixes#4126, #4641 and #5567.
Toggling a video or audio filter twice would treat the option as changed
because the backup value is NULL, and the current value of vf/af is a
list with one empty item, so obj_settings_list_equal had to be changed.
Unlike the page switching/scrolling keys which are bound at runtime
and therefore we need to know which (configured) keys to bind, the
main keys (i/I by default) are static and can be bound via input.conf.
And indeed, the builtin bindings at etc/input.conf have them already.
- The video filter to turn the video upside-down is vflip. There is no
filter called "flip" so using it just causes an error.
- Reword a sentence.
- Add exact and all to the values accepted by cover-art-auto. They were
implemented in 029ff1049b but not added to the accepted arguments.
Page 4 bindings listing wants to exclude the interactive keys of the
stats script itself - so that they don't hide the normal keys which
are bound when stats is not interactive.
It did so by testing that the bound command includes stats/__key
which is how it usually looks when a script binds keys.
However, if a script uses a name for the binding - like stats.lua does
for the interative keys (because it later removes them by name when
interactive mode ends), then the command has stats/name rather than
stats/__key...
To fix this, we change the names of the forced interactive bindings
to start with __forced_, and that's now also what the page-4 listing
excludes.
This reverts commit 0f1654811bda0dfdd337734ec33c59b67522234a.
It was an incorrect fix, because the key names do get used - to remove
the forced bindings once stats exits the interactive mode.
And without names - the interactive keys remained active even after
stats exited interactive mode.
The page 4 keybinding list tries to skip the interactive bindings of
stats itself (because they would hide the normal bindings of these
keys when stats is not visible), and to do that it excludes commands
containing "script-binding stats/__key" - which is how script-added
bindings usually look like.
However, keys which are added with a "name" bind stats/name rather
than stats/__key... - and that's what stats.lua did till now with its
interactive force-bindings.
Now the interactive forced bindings are added without a name, and so
they do end up using the automatic stats/__key... and get excluded.
While --input-test is useful, and so is page 4 of stats, until now
there was no way to simply print the list in a help-like fashion.
This commit adds such printout, invoked by the script opt
stats-bindlist=yes, which uses the existing page 4 code. This prints
the list on startup and quits immediately - like any help page.
It's awkward to invoke compared to other help pages, and it does
require the stats page to be enabled (it is by default), however
it is a script-generated output, and currently there's no other
method to print a help page generated by a script.
The printout itself is performed using lua's io.write. While reliable,
it's not the standard way for mpv to print to the terminal.
Other possible printout methods are mp.msg.info - which also prints
"[stats]" prefix on each line (ugly), or forcing term-osd and setting
an osd-message which mpv will then print at the terminal - however
that's printed to stderr, and could also be subject to timing concerns
since we quit right afterwards.
In the future we can consider changing/integrating the invocation so
that mpv itself could print a help page generated by a script, thus
solving both the awkward invocation and printout-method issues.
This is a scrollable page which also works nicely with the terminal
OSD. Typically there are more than 100 bound keys.
It groups the binding using fuzzy property/command/script name after
simple analysis of the command string, and then further sorts the
binding in each group according to the "complexity" of the key itself
(plain keys -> keys with modifiers, alphabetically, etc).
The alignment/grouping style is heavily inspired by @medhefgo's #8924
but otherwise it's an independent implementation.
Typically the current page is rebuilt and rendered once per second,
howeve, scrolling can invoke the rebuild function very frequently,
even at a rate which is too fast for the rebuild function to keep
up. This can result in high CPU usage and input lag.
This commit adds an argument to the page-rebuild function, letting it
know whether or not it's called following a scroll keypress, thus
allowing it to cache intermediate data so that it doesn't have to
re-calculate the whole page from scratch.
This additional argument is unused currently, but it could be useful
for the internal performance page - which can be relatively heavy.
When playing a new file, if paused_for_cache was true before being reset
the AO would never be unpaused because that state was thrown away, leaving it stuck.
Fix this by updating the pause state before resetting that variable. Note that this
does not make the second update_internal_pause_state() call redundant.
This fixes the same bug fb5d976cb0 was supposed to.
The previous code tried to disable autocrop for cover-art by testing
that track-list/$vid/albumart is false, however, $vid is completely
unrelated to the track-list index.
It only sometimes succeeded to disable for albumart, by accident,
e.g. with one audio track and one video track where $vid==1 and
track-list/1 happens to be the video (cover art) track.
The new code detects the currently-used video track by finding a track
with type=="video" and selected==true. Unlike the previous code, it
also works in scenarios with many audio/video/sub tracks.
Additionally, autocrop is now enabled also with lavfi-complex, which
should be considered an improvement. The previous code implicitly
disabled it with lavfi-complex because $vid is nil on such case.
in->byte_level_seeks field is written and modified inside
update_bytes_read at the same time when demux_get_reader_state
is executing, which locks the demux thread mutex. This results
in a data race, reported by Thread Sanitizer when playing mp3 file
of sufficient long length.
reinit_audio_filters_and_output function will free mpctx->ao_chain
when there is a failure during audio initialization. So modify it
to return -1 in case of init failure. The return value is checked
to avoid use after free. Reported by Address Sanitizer when manually
specifying --ao which triggers "Failed to initialize audio driver" error.
When using "stty susp ''" to disable sending the TSTP signal with ^Z,
mpv didn't recognize ^Z correctly in the terminal:
[input] No key binding found for key 'Ctrl+2'.
Because ASCII 26 (^Z) and above were incorrectly considered ^<NUMBER>.
This commit moves the cutoff between letters/numbers from 25 to 26 so
that ^Z is now detected correctly as ^<LETTER>.
Additionally, it rephrases the ^<NUMBER> formula for clarity.
The --secondary-sub-visibility options was previously undocumented in
the pull request that added it. This commit adds documentation for it
and clarifies its behavior.
Modifies the sub-seek and sub-step commands with a second <flags>
argument to specify whether to seek/step on the primary or secondary
subtitles. The flag is used to index into the current_track array in
cmd_sub_step_seek.
Adds secondary-sub-start and secondary-sub-end properties by setting
the current_track index in the m_property's priv variable which later
gets accessed in get_times. Also adds a test of the secondary subtitle
time properties in tests/subtimes.js bound to 'T'.
Though, only when the output format is matroska, to avoid muxing errors.
This is quite useful when the input has ASS subtitles, as they tend to
rely on embedded fonts.
I've looked and studied the flow in the recorder, and to my
understanding, the packet queue is moot after the initial sync, maybe
even then - but that's beyond me right now.
With the previous choice to mux trailing packets whatever the case, this
doesn't result in any new ill effects (and some missing packets at the
end is no big deal).
Notably, since we don't have to hold onto the packets after we get
muxing, we'll never run into any issues with veeery long GOPs filling up
our queue (resulting in dropped packets and much user chagrin).
For muxing, FFmpeg expects the FLAC extradata to be just the bare STREAMINFO,
and passing the full FLAC extradata (fLaC header and block size, with any
additional channel layout metadata) will result in malformed output, as
ffmpeg will simply prefix another fLaC header in front.
This can be considered to be a bug.
FFmpeg's own demuxers only store the STREAMINFO, hence the naivety, while
our common source of FLAC streams, the matroska demuxer, holds onto the
full extradata. It has been deemed preferable to adjust the extradata upon
muxing, instead of in the demuxer (ffmpeg's FLAC decoder knows to read
the full fLaC extradata).
This fixes muxing FLAC streams, meaning recorder.c or dump-cache.
dump_cache() calls qsort() to order an array of pointers, while the
comparator forgets it's receiving pointers to pointers.
Since cache-dumping over multiple cache ranges is fairly rare, this
seems to have gone unnoticed.
In commit f7678575a5, wm4 chooses to mux
all remaining packets when mp_recorder_mark_discontinuity() is called and
adds a call to mux_packets(). However, it is called only after flush_packets(),
which clears the packets before they can be muxed out. This has no ill
effects per se - recordings end on keyframes, as before - but judging from
his commit message, the intention explicitly was to output the inter
frames, since long GOPs can mean several seconds of missing content from
the output. So, clear the stream packet queues only after the final mux.
Also, flushing can mean both discarding and committing. What a country!
osc-visibility can already be changed at runtime via script-message
or other means, but until now there was no way to tell what the
current state is.
Now shared-script-properties/osc-visibility reflects this state.
It's output-only by the osc - changing it does not affect the osc.
Useful if a script wants to change osc-visibility temporarily, and
later restore to its original state.
There's no way to coordinate if more than one script wants to change
it, but that would be a hard problem to solve anyway, even if the
osc itself tried to coordinate such requests from different sources.
Another day, another wayland refactor. Way back when, dcc3c2e added
support for the hidpi-window-scale option (something you probably should
never set to no but whatever) to wayland. Well technically, it never had
any runtime toggling support (don't remember if detecting when vo_opts
changed was possible or not then; maybe not). Anyways in the process of
fixing that, I went ahead and refactored how this is all handled. The
key difference is that when hidpi-window-scale is disabled, wl->scaling
is directly set to 1 instead of forcibly setting
wl->current_output->scale to 1. Note that scaling operations don't
always require a geometry reset/resize so set_surface_scaling needs to
be separate from set_geometry. The logic here is kind of complicated but
it (should) be correct.
The wl_surface lives for the entire lifetime of the vo. It's only
neccesary to set the scale initially and when the output scaling changes
(the surface moves to a different output with a different scale or the
output itself changes it scale). All of the calls that were being made
in the egl/vulkan resize functions are not needed. vo_wlshm wasn't
correctly rescaling itself before this commit since it had no logic to
handle scale changes. This should all be shared, common code in the
surface/output listeners.
A subtle regression from c26d833. On sway if mpv was set to be a
floating window in the config, set_buffer_scale would actually get
applied twice according to the wayland log. That meant a 1920x1080
window would appear as a 960x540 window if the scale of the wl_output
was set to 2. This only affected egl on sway (didn't occur on weston and
was too lazy to try anything else; probably they were fine). Since
wl->render is initially false, that meant that the very first run
through the render loop returns false. This probably caused something
weird to happen with the set_buffer_scale calls (the egl window gets
created and everything but mpv doesn't write to it just yet) which makes
the set_buffer_scale call happen an extra time. Since it was always
intended for mpv to initally render, this is worth fixing. Just chnage
wl->render to wl->hidden (again) and flip the bools around. That way,
the initial false value results in render == true and mpv tries to draw
on the first pass. This fixes the weird scaling behavior because
reasons.
Not sure what I was on when I wrote this. wayland-app-id is supposed to
default to "mpv". Just set that in the vo_sub_opts and don't do this
weird m_config_cache_write_opt thing. Also make the doc entry nicer.
Mostly a cosmetic change that (hopefully) makes things look better. Some
functions and structs that were previously being exported in the wayland
header were made static to the wayland_common.c file (these shouldn't be
accessed by anyone else).
When the current file is hidden and `ignore_hidden` is true,
autoload will skip loading other files in the current directory. Make
sure that the current file is always counted for autoloading even if it
is hidden.
In 8a7614a0fb files that start with a '.'
were blacklisted from autoload.lua. Since then
35e8710b86 was introduced and explicitly
whitelisted file extensions. With this change, there is no longer a
reason to blacklist all files starting with '.', because it is valid to
have a file called '.hidden.mkv', and there is no chance of hidden files
such as '.bashrc', '.DS_STORE', '.gitignore', etc. being autoloaded by
mpv.
This commit tries to keep the same behavior as before, which is to by
default not load hidden files, but allows the user to optionally allow
hidden files to be autoloaded.
Commits 4d1ffec and 6e481d0 renamed sub-ass-style-override to
sub-ass-override. But in commit bd603c2, when renaming it in
quit-watch-later's backup_properties, which determines which properties
are saved by quit-watch-later/write-watch-later-config, it was
incorrectly renamed to sub-style-override instead, and thus never got
saved even if modified at runtime. Instead mpv attempted to save the
non-existing property "sub-style-override", but since no error is raised
when saving non-existing properties with quit-watch-later, no one
noticed it. This commit renames the saved property to the correct new
name "sub-ass-override" so that it does get saved.
This fixes two issues, both of which resulted from the timers-wait
period not being re-calculated after idle-observers were executed:
- If timers were added from an idle observer then they could fire long
after they were due (only when/if the next mpv event arrives).
- Idle observers don't execute in zero time, and the wait period for
the next timer was implicitly extended by the idle observers
execution time (because it was calculated before the idle observers).
This commit ensures that if idle-observers were executed, then the
timers wait period is re-calculated, which solves both issues.
