From f30bf73bf22ed054233507d7277e3658e51d86bd Mon Sep 17 00:00:00 2001 From: wm4 Date: Tue, 17 Jan 2012 02:49:27 +0100 Subject: [PATCH] etc/input.conf: make file contents match default key bindings There were some slight differences between what input.conf mapped, and what was in input.c def_cmd_binds[]. Make them match. Add some minor documentation improvements in input.cfg. Also remove double comments ('##'), because they were confusing. --- etc/input.conf | 246 +++++++++++++++++++++++++++++-------------------- 1 file changed, 146 insertions(+), 100 deletions(-) diff --git a/etc/input.conf b/etc/input.conf index 509f1bf876..7b61344f7f 100644 --- a/etc/input.conf +++ b/etc/input.conf @@ -1,62 +1,83 @@ -## -## MPlayer input control file -## -## You are able to redefine default keyboard/joystick/mouse/LIRC bindings, or -## add new ones here. -## See DOCS/tech/slave.txt for possible commands that can be bound. -## Also see mplayer -input cmdlist for other possible options. -## The file should be placed in the $HOME/.mplayer directory. -## -## If you wish to unbind a key, use key ignore. -## e.g. ENTER ignore -## -## You can use modifier-key combinations like Shift+Left or Ctrl+Alt+x with -## modifiers Shift, Ctrl, Alt and Meta, but note that currently reading -## key combinations is only supported through the video windows of X-based -## output drivers (not in output windows of other drivers or in a terminal). +# MPlayer input control file +# +# You are able to redefine default keyboard/joystick/mouse/LIRC bindings, or +# add new ones here. +# See DOCS/tech/slave.txt for possible commands that can be bound. +# Also see mplayer -input cmdlist for other possible options. +# The file should be placed in the $HOME/.mplayer directory. +# +# If you wish to unbind a key, use key ignore. +# e.g. ENTER ignore +# +# Note that merely removing default key bindings from this file won't remove +# the default bindings mplayer was compiled with, unless +# --input=nodefault-bindings +# is specified. +# +# Lines starting with # are comments. Use SHARP to assign the # key. +# +# Some characters need to be escaped. In particular, if you want to display +# a '\' character as part of an osd_show_property_text OSD message, you have to +# escape 2 times: +# key osd_show_property_text "This is a single backslash: \\\\!" +# +# You can use modifier-key combinations like Shift+Left or Ctrl+Alt+x with +# modifiers Shift, Ctrl, Alt and Meta, but note that currently reading +# key combinations is only supported through the video windows of X-based +# output drivers (not in output windows of other drivers or in a terminal). -RIGHT seek +10 -LEFT seek -10 -DOWN seek -60 -UP seek +60 +MOUSE_BTN0_DBL vo_fullscreen # toggle fullscreen on/off +MOUSE_BTN2 pause # toggle pause on/off +MOUSE_BTN3 seek 10 +MOUSE_BTN4 seek -10 +MOUSE_BTN5 volume 1 +MOUSE_BTN6 volume -1 + +# Seek units are in seconds, but note that these are limited by keyframes +RIGHT seek 10 +LEFT seek -10 +UP seek 60 +DOWN seek -60 # Do smaller, always exact (non-keyframe-limited), seeks with shift. -Shift+Right seek +1 0 1 -Shift+Left seek -1 0 1 -Shift+Down seek -5 0 1 -Shift+Up seek +5 0 1 +Shift+RIGHT seek 1 0 1 +Shift+LEFT seek -1 0 1 +Shift+UP seek 5 0 1 +Shift+DOWN seek -5 0 1 PGUP seek 600 PGDWN seek -600 -m mute -# switch_audio # switch audio streams -+ audio_delay 0.100 -= audio_delay 0.100 ++ audio_delay 0.100 # this changes audio/video sync - audio_delay -0.100 -[ speed_mult 0.9091 # scale playback speed +[ speed_mult 0.9091 # scale playback speed ] speed_mult 1.1 { speed_mult 0.5 } speed_mult 2.0 -BS speed_set 1.0 # reset speed to normal +BS speed_set 1.0 # reset speed to normal q quit ESC quit -ENTER pt_step 1 1 # skip to next file -p pause -. frame_step # advance one frame and pause +p pause # toggle pause/playback mode +. frame_step # advance one frame and pause SPACE pause HOME pt_up_step 1 END pt_up_step -1 -> pt_step 1 # skip to next file -< pt_step -1 # previous +> pt_step 1 # skip to next file +ENTER pt_step 1 1 # skip to next file or quit +< pt_step -1 # skip to previous file INS alt_src_step 1 DEL alt_src_step -1 -o osd -I osd_show_property_text "${filename}" # display filename in osd +o osd # cycle through OSD mode +I osd_show_property_text "${filename}" # display filename in osd P osd_show_progression -z sub_delay -0.1 # subtract 100 ms delay from subs -x sub_delay +0.1 # add +z sub_delay -0.1 # subtract 100 ms delay from subs +x sub_delay +0.1 # add +g sub_step -1 # immediately display next subtitle +y sub_step +1 # previous 9 volume -1 / volume -1 0 volume 1 * volume 1 +( balance -0.1 # adjust audio balance in favor of left +) balance 0.1 # right +m mute 1 contrast -1 2 contrast 1 3 brightness -1 @@ -65,54 +86,78 @@ x sub_delay +0.1 # add 6 hue 1 7 saturation -1 8 saturation 1 -( balance -0.1 # adjust audio balance in favor of left -) balance +0.1 # right -d frame_drop -D step_property deinterlace # toggle deinterlacer, requires -vf yadif or kerndeint -r sub_pos -1 # move subtitles up -t sub_pos +1 # down -#? sub_step +1 # immediately display next subtitle -#? sub_step -1 # previous -#? sub_scale +0.1 # increase subtitle font size -#? sub_scale -0.1 # decrease subtitle font size -V step_property_osd ass_vsfilter_aspect_compat # stretch SSA/ASS subtitles with anamorphic videos to match historical VSFilter behavior -f vo_fullscreen -T vo_ontop # toggle video window ontop of other windows -w panscan -0.1 # zoom out with -panscan 0 -fs -e panscan +0.1 # in -s screenshot # take a png screenshot with -vf screenshot - # S will take a png screenshot of every frame +d frame_drop # cycle through framedrop modes +# toggle deinterlacer; requires either vdpau output, -vf yadif or kerndeint +D step_property_osd deinterlace +c step_property_osd colormatrix +# Next 3 currently only work with --no-ass +r sub_pos -1 # move subtitles up +t sub_pos +1 # down +a sub_alignment +v sub_visibility +# stretch SSA/ASS subtitles with anamorphic videos to match historical +V step_property_osd ass_vsfilter_aspect_compat +j sub_select # cycle through subtitles +J sub_select -3 # ...backwards +F forced_subs_only +SHARP switch_audio # switch audio streams +_ step_property switch_video +TAB step_property switch_program +i edl_mark # for use with --edlout mode +T vo_ontop # toggle video window ontop of other windows +f vo_fullscreen # toggle fullscreen +C step_property_osd capturing +s screenshot 0 # take a png screenshot +S screenshot 1 # ...on every frame +Alt+s screenshot 0 1 # take a screenshot of window contents +Alt+S screenshot 1 1 # ...on every frame +w panscan -0.1 # zoom out with -panscan 0 -fs +e panscan +0.1 # in +POWER quit +MENU osd +PLAY pause +PAUSE pause +PLAYPAUSE pause +STOP quit +FORWARD seek 60 +REWIND seek -60 +NEXT pt_step 1 +PREV pt_step -1 +VOLUME_UP volume 1 +VOLUME_DOWN volume -1 +MUTE mute +CLOSE_WIN quit +! seek_chapter -1 # skip to previous chapter +@ seek_chapter 1 # next +A switch_angle 1 +U stop +# TV h tv_step_channel 1 -l tv_step_channel -1 +k tv_step_channel -1 n tv_step_norm -b tv_step_chanlist +u tv_step_chanlist +X step_property teletext_mode 1 +W step_property teletext_page 1 +Q step_property teletext_page -1 -## -## Mouse section -## +# +# DVDNAV +# Requires dvdnav:// +# -MOUSE_BTN0_DBL vo_fullscreen # toggle fullscreen on/off -MOUSE_BTN2 pause # toggle pause on/off +KP8 dvdnav up +KP2 dvdnav down +KP4 dvdnav left +KP6 dvdnav right +KP5 dvdnav menu +KP_ENTER dvdnav select +MOUSE_BTN0 dvdnav mouse +KP7 dvdnav prev -## -## Joystick section -## WARNING: joystick support has to be explicitly enabled at -## compiletime with --enable-joystick -## - -JOY_RIGHT seek 10 -JOY_LEFT seek -10 -JOY_UP seek 60 -JOY_DOWN seek -60 -JOY_BTN0 pause -JOY_BTN1 osd -JOY_BTN2 volume 1 -JOY_BTN3 volume -1 - -## -## Apple Remote section -## +# +# Apple Remote section +# AR_PLAY pause AR_PLAY_HOLD quit @@ -120,29 +165,30 @@ AR_NEXT seek 30 AR_NEXT_HOLD seek 120 AR_PREV seek -10 AR_PREV_HOLD seek -120 +AR_MENU osd AR_MENU_HOLD mute AR_VUP volume 1 AR_VDOWN volume -1 -## -## DVDNAV -## Requires dvdnav:// -## +# +# Joystick section +# WARNING: joystick support has to be explicitly enabled at +# compiletime with --enable-joystick +# -UP {dvdnav} dvdnav up # DVDNav UP -DOWN {dvdnav} dvdnav down # DVDNav DOWN -LEFT {dvdnav} dvdnav left # DVDNav LEFT -RIGHT {dvdnav} dvdnav right # DVDNav RIGHT -ESC {dvdnav} dvdnav menu # DVDNav MENU -ENTER {dvdnav} dvdnav select # DVDNav SELECT (ok) -BS {dvdnav} dvdnav prev # DVDNav PREVIOUS menu (in the order chapter->title->root) +JOY_AXIS0_PLUS seek 10 +JOY_AXIS0_MINUS seek -10 +JOY_AXIS1_MINUS seek 60 +JOY_AXIS1_PLUS seek -60 +JOY_BTN0 pause +JOY_BTN1 osd +JOY_BTN2 volume 1 +JOY_BTN3 volume -1 -AR_VUP {dvdnav} dvdnav up # DVDNav UP -AR_VDOWN {dvdnav} dvdnav down # DVDNav DOWN -AR_PREV {dvdnav} dvdnav left # DVDNav LEFT -AR_NEXT {dvdnav} dvdnav right # DVDNav RIGHT -AR_MENU {dvdnav} dvdnav menu # DVDNav MENU -AR_PLAY {dvdnav} dvdnav select # DVDNav SELECT (ok) +# +# Not assigned by default +# (not an exhaustive list of unbound commands) +# -#? seek_chapter -1 # skip to previous dvd chapter -#? seek_chapter +1 # next +#? sub_scale +0.1 # increase subtitle font size +#? sub_scale -0.1 # decrease subtitle font size