mpv/core/playlist_parser.c

781 lines
21 KiB
C
Raw Normal View History

/*
* This file is part of MPlayer.
*
* MPlayer is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* MPlayer is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License along
* with MPlayer; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
*/
#include "config.h"
#include <stdlib.h>
#include <stdio.h>
#include <string.h>
#include <assert.h>
#include <errno.h>
#include <sys/types.h>
#include <sys/stat.h>
#include <fcntl.h>
#include <unistd.h>
#include <ctype.h>
#include <limits.h>
#include "talloc.h"
#include "asxparser.h"
#include "m_config.h"
mplayer: turn playtree into a list, and change per-file option handling Summary: - There is no playtree anymore. It's reduced to a simple list. - Options are now always global. You can still have per-file options, but these are optional and require special syntax. - The slave command pt_step has been removed, and playlist_next and playlist_prev added. (See etc/input.conf changes.) This is a user visible incompatible change, and will break slave-mode applications. - The pt_clear slave command is renamed to playlist_clear. - Playtree entries could have multiple files. This is not the case anymore, and playlist entries have always exactly one entry. Whenever something adds more than one file (like ASX playlists or dvd:// or dvdnav:// on the command line), all files are added as separate playlist entries. Note that some of the changes are quite deep and violent. Expect regressions. The playlist parsing code in particular is of low quality. I didn't try to improve it, and merely spent to least effort necessary to keep it somehow working. (Especially ASX playlist handling.) The playtree code was complicated and bloated. It was also barely used. Most users don't even know that mplayer manages the playlist as tree, or how to use it. The most obscure features was probably specifying a tree on command line (with '{' and '}' to create/close tree nodes). It filled the player code with complexity and confused users with weird slave commands like pt_up. Replace the playtree with a simple flat playlist. Playlist parsers that actually return trees are changed to append all files to the playlist pre-order. It used to be the responsibility of the playtree code to change per-file config options. Now this is done by the player core, and the playlist code is free of such details. Options are not per-file by default anymore. This was a very obscure and complicated feature that confused even experienced users. Consider the following command line: mplayer file1.mkv file2.mkv --no-audio file3.mkv This will disable the audio for file2.mkv only, because options are per-file by default. To make the option affect all files, you're supposed to put it before the first file. This is bad, because normally you don't need per-file options. They are very rarely needed, and the only reasonable use cases I can imagine are use of the encode backend (mplayer encode branch), or for debugging. The normal use case is made harder, and the feature is perceived as bug. Even worse, correct usage is hard to explain for users. Make all options global by default. The position of an option isn't significant anymore (except for options that compensate each other, consider --shuffle --no-shuffle). One other important change is that no options are reset anymore if a new file is started. If you change settings with slave mode commands, they will not be changed by playing a new file. (Exceptions include settings that are too file specific, like audio/subtitle stream selection.) There is still some need for per-file options. Debugging and encoding are use cases that profit from per-file options. Per-file profiles (as well as per-protocol and per-VO/AO options) need the implementation related mechanisms to backup and restore options when the playback file changes. Simplify the save-slot stuff, which is possible because there is no hierarchical play tree anymore. Now there's a simple backup field. Add a way to specify per-file options on command line. Example: mplayer f1.mkv -o0 --{ -o1 f2.mkv -o2 f3.mkv --} f4.mkv -o3 will have the following options per file set: f1.mkv, f4.mkv: -o0 -o3 f2.mkv, f3.mkv: -o0 -o3 -o1 -o2 The options --{ and --} start and end per-file options. All files inside the { } will be affected by the options equally (similar to how global options and multiple files are handled). When playback of a file starts, the per-file options are set according to the command line. When playback ends, the per-file options are restored to the values when playback started.
2012-07-31 19:33:26 +00:00
#include "playlist.h"
#include "playlist_parser.h"
#include "stream/stream.h"
#include "demux/demux.h"
#include "core/mp_msg.h"
#include "core/path.h"
#define BUF_STEP 1024
#define WHITES " \n\r\t"
mplayer: turn playtree into a list, and change per-file option handling Summary: - There is no playtree anymore. It's reduced to a simple list. - Options are now always global. You can still have per-file options, but these are optional and require special syntax. - The slave command pt_step has been removed, and playlist_next and playlist_prev added. (See etc/input.conf changes.) This is a user visible incompatible change, and will break slave-mode applications. - The pt_clear slave command is renamed to playlist_clear. - Playtree entries could have multiple files. This is not the case anymore, and playlist entries have always exactly one entry. Whenever something adds more than one file (like ASX playlists or dvd:// or dvdnav:// on the command line), all files are added as separate playlist entries. Note that some of the changes are quite deep and violent. Expect regressions. The playlist parsing code in particular is of low quality. I didn't try to improve it, and merely spent to least effort necessary to keep it somehow working. (Especially ASX playlist handling.) The playtree code was complicated and bloated. It was also barely used. Most users don't even know that mplayer manages the playlist as tree, or how to use it. The most obscure features was probably specifying a tree on command line (with '{' and '}' to create/close tree nodes). It filled the player code with complexity and confused users with weird slave commands like pt_up. Replace the playtree with a simple flat playlist. Playlist parsers that actually return trees are changed to append all files to the playlist pre-order. It used to be the responsibility of the playtree code to change per-file config options. Now this is done by the player core, and the playlist code is free of such details. Options are not per-file by default anymore. This was a very obscure and complicated feature that confused even experienced users. Consider the following command line: mplayer file1.mkv file2.mkv --no-audio file3.mkv This will disable the audio for file2.mkv only, because options are per-file by default. To make the option affect all files, you're supposed to put it before the first file. This is bad, because normally you don't need per-file options. They are very rarely needed, and the only reasonable use cases I can imagine are use of the encode backend (mplayer encode branch), or for debugging. The normal use case is made harder, and the feature is perceived as bug. Even worse, correct usage is hard to explain for users. Make all options global by default. The position of an option isn't significant anymore (except for options that compensate each other, consider --shuffle --no-shuffle). One other important change is that no options are reset anymore if a new file is started. If you change settings with slave mode commands, they will not be changed by playing a new file. (Exceptions include settings that are too file specific, like audio/subtitle stream selection.) There is still some need for per-file options. Debugging and encoding are use cases that profit from per-file options. Per-file profiles (as well as per-protocol and per-VO/AO options) need the implementation related mechanisms to backup and restore options when the playback file changes. Simplify the save-slot stuff, which is possible because there is no hierarchical play tree anymore. Now there's a simple backup field. Add a way to specify per-file options on command line. Example: mplayer f1.mkv -o0 --{ -o1 f2.mkv -o2 f3.mkv --} f4.mkv -o3 will have the following options per file set: f1.mkv, f4.mkv: -o0 -o3 f2.mkv, f3.mkv: -o0 -o3 -o1 -o2 The options --{ and --} start and end per-file options. All files inside the { } will be affected by the options equally (similar to how global options and multiple files are handled). When playback of a file starts, the per-file options are set according to the command line. When playback ends, the per-file options are restored to the values when playback started.
2012-07-31 19:33:26 +00:00
typedef struct play_tree_parser {
struct stream *stream;
char *buffer,*iter,*line;
int buffer_size , buffer_end;
int keep;
struct playlist *pl;
} play_tree_parser_t;
static void
strstrip(char* str) {
char* i;
if (str==NULL)
return;
for(i = str ; i[0] != '\0' && strchr(WHITES,i[0]) != NULL; i++)
/* NOTHING */;
if(i[0] != '\0') {
memmove(str,i,strlen(i) + 1);
for(i = str + strlen(str) - 1 ; strchr(WHITES,i[0]) != NULL; i--)
/* NOTHING */;
i[1] = '\0';
} else
str[0] = '\0';
}
static char*
play_tree_parser_get_line(play_tree_parser_t* p) {
char *end,*line_end;
int r,resize = 0;
if(p->buffer == NULL) {
p->buffer = malloc(BUF_STEP);
p->buffer_size = BUF_STEP;
p->buffer[0] = 0;
p->iter = p->buffer;
}
if(p->stream->eof && (p->buffer_end == 0 || p->iter[0] == '\0'))
return NULL;
assert(p->buffer_end < p->buffer_size);
assert(!p->buffer[p->buffer_end]);
while(1) {
if(resize) {
char *tmp;
r = p->iter - p->buffer;
end = p->buffer + p->buffer_end;
if (p->buffer_size > INT_MAX - BUF_STEP)
break;
tmp = realloc(p->buffer, p->buffer_size + BUF_STEP);
if (!tmp)
break;
p->buffer = tmp;
p->iter = p->buffer + r;
p->buffer_size += BUF_STEP;
resize = 0;
}
if(p->buffer_size - p->buffer_end > 1 && ! p->stream->eof) {
r = stream_read(p->stream,p->buffer + p->buffer_end,p->buffer_size - p->buffer_end - 1);
if(r > 0) {
p->buffer_end += r;
assert(p->buffer_end < p->buffer_size);
p->buffer[p->buffer_end] = '\0';
while(strlen(p->buffer + p->buffer_end - r) != r)
p->buffer[p->buffer_end - r + strlen(p->buffer + p->buffer_end - r)] = '\n';
}
assert(!p->buffer[p->buffer_end]);
}
end = strchr(p->iter,'\n');
if(!end) {
if(p->stream->eof) {
end = p->buffer + p->buffer_end;
break;
}
resize = 1;
continue;
}
break;
}
line_end = (end > p->iter && *(end-1) == '\r') ? end-1 : end;
if(line_end - p->iter >= 0)
p->line = realloc(p->line, line_end - p->iter + 1);
else
return NULL;
if(line_end - p->iter > 0)
strncpy(p->line,p->iter,line_end - p->iter);
p->line[line_end - p->iter] = '\0';
if(end[0] != '\0')
end++;
if(!p->keep) {
if(end[0] != '\0') {
p->buffer_end -= end-p->iter;
memmove(p->buffer,end,p->buffer_end);
} else
p->buffer_end = 0;
p->buffer[p->buffer_end] = '\0';
p->iter = p->buffer;
} else
p->iter = end;
return p->line;
}
static void
play_tree_parser_reset(play_tree_parser_t* p) {
p->iter = p->buffer;
}
static void
play_tree_parser_stop_keeping(play_tree_parser_t* p) {
p->keep = 0;
if(p->iter && p->iter != p->buffer) {
p->buffer_end -= p->iter -p->buffer;
if(p->buffer_end)
memmove(p->buffer,p->iter,p->buffer_end);
p->buffer[p->buffer_end] = 0;
p->iter = p->buffer;
}
}
mplayer: turn playtree into a list, and change per-file option handling Summary: - There is no playtree anymore. It's reduced to a simple list. - Options are now always global. You can still have per-file options, but these are optional and require special syntax. - The slave command pt_step has been removed, and playlist_next and playlist_prev added. (See etc/input.conf changes.) This is a user visible incompatible change, and will break slave-mode applications. - The pt_clear slave command is renamed to playlist_clear. - Playtree entries could have multiple files. This is not the case anymore, and playlist entries have always exactly one entry. Whenever something adds more than one file (like ASX playlists or dvd:// or dvdnav:// on the command line), all files are added as separate playlist entries. Note that some of the changes are quite deep and violent. Expect regressions. The playlist parsing code in particular is of low quality. I didn't try to improve it, and merely spent to least effort necessary to keep it somehow working. (Especially ASX playlist handling.) The playtree code was complicated and bloated. It was also barely used. Most users don't even know that mplayer manages the playlist as tree, or how to use it. The most obscure features was probably specifying a tree on command line (with '{' and '}' to create/close tree nodes). It filled the player code with complexity and confused users with weird slave commands like pt_up. Replace the playtree with a simple flat playlist. Playlist parsers that actually return trees are changed to append all files to the playlist pre-order. It used to be the responsibility of the playtree code to change per-file config options. Now this is done by the player core, and the playlist code is free of such details. Options are not per-file by default anymore. This was a very obscure and complicated feature that confused even experienced users. Consider the following command line: mplayer file1.mkv file2.mkv --no-audio file3.mkv This will disable the audio for file2.mkv only, because options are per-file by default. To make the option affect all files, you're supposed to put it before the first file. This is bad, because normally you don't need per-file options. They are very rarely needed, and the only reasonable use cases I can imagine are use of the encode backend (mplayer encode branch), or for debugging. The normal use case is made harder, and the feature is perceived as bug. Even worse, correct usage is hard to explain for users. Make all options global by default. The position of an option isn't significant anymore (except for options that compensate each other, consider --shuffle --no-shuffle). One other important change is that no options are reset anymore if a new file is started. If you change settings with slave mode commands, they will not be changed by playing a new file. (Exceptions include settings that are too file specific, like audio/subtitle stream selection.) There is still some need for per-file options. Debugging and encoding are use cases that profit from per-file options. Per-file profiles (as well as per-protocol and per-VO/AO options) need the implementation related mechanisms to backup and restore options when the playback file changes. Simplify the save-slot stuff, which is possible because there is no hierarchical play tree anymore. Now there's a simple backup field. Add a way to specify per-file options on command line. Example: mplayer f1.mkv -o0 --{ -o1 f2.mkv -o2 f3.mkv --} f4.mkv -o3 will have the following options per file set: f1.mkv, f4.mkv: -o0 -o3 f2.mkv, f3.mkv: -o0 -o3 -o1 -o2 The options --{ and --} start and end per-file options. All files inside the { } will be affected by the options equally (similar to how global options and multiple files are handled). When playback of a file starts, the per-file options are set according to the command line. When playback ends, the per-file options are restored to the values when playback started.
2012-07-31 19:33:26 +00:00
static bool parse_asx(play_tree_parser_t* p) {
int comments = 0,get_line = 1;
char* line = NULL;
mp_msg(MSGT_PLAYTREE,MSGL_V,"Trying asx...\n");
while(1) {
if(get_line) {
line = play_tree_parser_get_line(p);
if(!line)
mplayer: turn playtree into a list, and change per-file option handling Summary: - There is no playtree anymore. It's reduced to a simple list. - Options are now always global. You can still have per-file options, but these are optional and require special syntax. - The slave command pt_step has been removed, and playlist_next and playlist_prev added. (See etc/input.conf changes.) This is a user visible incompatible change, and will break slave-mode applications. - The pt_clear slave command is renamed to playlist_clear. - Playtree entries could have multiple files. This is not the case anymore, and playlist entries have always exactly one entry. Whenever something adds more than one file (like ASX playlists or dvd:// or dvdnav:// on the command line), all files are added as separate playlist entries. Note that some of the changes are quite deep and violent. Expect regressions. The playlist parsing code in particular is of low quality. I didn't try to improve it, and merely spent to least effort necessary to keep it somehow working. (Especially ASX playlist handling.) The playtree code was complicated and bloated. It was also barely used. Most users don't even know that mplayer manages the playlist as tree, or how to use it. The most obscure features was probably specifying a tree on command line (with '{' and '}' to create/close tree nodes). It filled the player code with complexity and confused users with weird slave commands like pt_up. Replace the playtree with a simple flat playlist. Playlist parsers that actually return trees are changed to append all files to the playlist pre-order. It used to be the responsibility of the playtree code to change per-file config options. Now this is done by the player core, and the playlist code is free of such details. Options are not per-file by default anymore. This was a very obscure and complicated feature that confused even experienced users. Consider the following command line: mplayer file1.mkv file2.mkv --no-audio file3.mkv This will disable the audio for file2.mkv only, because options are per-file by default. To make the option affect all files, you're supposed to put it before the first file. This is bad, because normally you don't need per-file options. They are very rarely needed, and the only reasonable use cases I can imagine are use of the encode backend (mplayer encode branch), or for debugging. The normal use case is made harder, and the feature is perceived as bug. Even worse, correct usage is hard to explain for users. Make all options global by default. The position of an option isn't significant anymore (except for options that compensate each other, consider --shuffle --no-shuffle). One other important change is that no options are reset anymore if a new file is started. If you change settings with slave mode commands, they will not be changed by playing a new file. (Exceptions include settings that are too file specific, like audio/subtitle stream selection.) There is still some need for per-file options. Debugging and encoding are use cases that profit from per-file options. Per-file profiles (as well as per-protocol and per-VO/AO options) need the implementation related mechanisms to backup and restore options when the playback file changes. Simplify the save-slot stuff, which is possible because there is no hierarchical play tree anymore. Now there's a simple backup field. Add a way to specify per-file options on command line. Example: mplayer f1.mkv -o0 --{ -o1 f2.mkv -o2 f3.mkv --} f4.mkv -o3 will have the following options per file set: f1.mkv, f4.mkv: -o0 -o3 f2.mkv, f3.mkv: -o0 -o3 -o1 -o2 The options --{ and --} start and end per-file options. All files inside the { } will be affected by the options equally (similar to how global options and multiple files are handled). When playback of a file starts, the per-file options are set according to the command line. When playback ends, the per-file options are restored to the values when playback started.
2012-07-31 19:33:26 +00:00
return false;
strstrip(line);
if(line[0] == '\0')
continue;
}
if(!comments) {
if(line[0] != '<') {
mp_msg(MSGT_PLAYTREE,MSGL_DBG2,"First char isn't '<' but '%c'\n",line[0]);
mp_msg(MSGT_PLAYTREE,MSGL_DBG3,"Buffer = [%s]\n",p->buffer);
mplayer: turn playtree into a list, and change per-file option handling Summary: - There is no playtree anymore. It's reduced to a simple list. - Options are now always global. You can still have per-file options, but these are optional and require special syntax. - The slave command pt_step has been removed, and playlist_next and playlist_prev added. (See etc/input.conf changes.) This is a user visible incompatible change, and will break slave-mode applications. - The pt_clear slave command is renamed to playlist_clear. - Playtree entries could have multiple files. This is not the case anymore, and playlist entries have always exactly one entry. Whenever something adds more than one file (like ASX playlists or dvd:// or dvdnav:// on the command line), all files are added as separate playlist entries. Note that some of the changes are quite deep and violent. Expect regressions. The playlist parsing code in particular is of low quality. I didn't try to improve it, and merely spent to least effort necessary to keep it somehow working. (Especially ASX playlist handling.) The playtree code was complicated and bloated. It was also barely used. Most users don't even know that mplayer manages the playlist as tree, or how to use it. The most obscure features was probably specifying a tree on command line (with '{' and '}' to create/close tree nodes). It filled the player code with complexity and confused users with weird slave commands like pt_up. Replace the playtree with a simple flat playlist. Playlist parsers that actually return trees are changed to append all files to the playlist pre-order. It used to be the responsibility of the playtree code to change per-file config options. Now this is done by the player core, and the playlist code is free of such details. Options are not per-file by default anymore. This was a very obscure and complicated feature that confused even experienced users. Consider the following command line: mplayer file1.mkv file2.mkv --no-audio file3.mkv This will disable the audio for file2.mkv only, because options are per-file by default. To make the option affect all files, you're supposed to put it before the first file. This is bad, because normally you don't need per-file options. They are very rarely needed, and the only reasonable use cases I can imagine are use of the encode backend (mplayer encode branch), or for debugging. The normal use case is made harder, and the feature is perceived as bug. Even worse, correct usage is hard to explain for users. Make all options global by default. The position of an option isn't significant anymore (except for options that compensate each other, consider --shuffle --no-shuffle). One other important change is that no options are reset anymore if a new file is started. If you change settings with slave mode commands, they will not be changed by playing a new file. (Exceptions include settings that are too file specific, like audio/subtitle stream selection.) There is still some need for per-file options. Debugging and encoding are use cases that profit from per-file options. Per-file profiles (as well as per-protocol and per-VO/AO options) need the implementation related mechanisms to backup and restore options when the playback file changes. Simplify the save-slot stuff, which is possible because there is no hierarchical play tree anymore. Now there's a simple backup field. Add a way to specify per-file options on command line. Example: mplayer f1.mkv -o0 --{ -o1 f2.mkv -o2 f3.mkv --} f4.mkv -o3 will have the following options per file set: f1.mkv, f4.mkv: -o0 -o3 f2.mkv, f3.mkv: -o0 -o3 -o1 -o2 The options --{ and --} start and end per-file options. All files inside the { } will be affected by the options equally (similar to how global options and multiple files are handled). When playback of a file starts, the per-file options are set according to the command line. When playback ends, the per-file options are restored to the values when playback started.
2012-07-31 19:33:26 +00:00
return false;
} else if(strncmp(line,"<!--",4) == 0) { // Comments
comments = 1;
line += 4;
if(line[0] != '\0' && strlen(line) > 0)
get_line = 0;
} else if(strncasecmp(line,"<ASX",4) == 0) // We got an asx element
break;
else // We don't get an asx
mplayer: turn playtree into a list, and change per-file option handling Summary: - There is no playtree anymore. It's reduced to a simple list. - Options are now always global. You can still have per-file options, but these are optional and require special syntax. - The slave command pt_step has been removed, and playlist_next and playlist_prev added. (See etc/input.conf changes.) This is a user visible incompatible change, and will break slave-mode applications. - The pt_clear slave command is renamed to playlist_clear. - Playtree entries could have multiple files. This is not the case anymore, and playlist entries have always exactly one entry. Whenever something adds more than one file (like ASX playlists or dvd:// or dvdnav:// on the command line), all files are added as separate playlist entries. Note that some of the changes are quite deep and violent. Expect regressions. The playlist parsing code in particular is of low quality. I didn't try to improve it, and merely spent to least effort necessary to keep it somehow working. (Especially ASX playlist handling.) The playtree code was complicated and bloated. It was also barely used. Most users don't even know that mplayer manages the playlist as tree, or how to use it. The most obscure features was probably specifying a tree on command line (with '{' and '}' to create/close tree nodes). It filled the player code with complexity and confused users with weird slave commands like pt_up. Replace the playtree with a simple flat playlist. Playlist parsers that actually return trees are changed to append all files to the playlist pre-order. It used to be the responsibility of the playtree code to change per-file config options. Now this is done by the player core, and the playlist code is free of such details. Options are not per-file by default anymore. This was a very obscure and complicated feature that confused even experienced users. Consider the following command line: mplayer file1.mkv file2.mkv --no-audio file3.mkv This will disable the audio for file2.mkv only, because options are per-file by default. To make the option affect all files, you're supposed to put it before the first file. This is bad, because normally you don't need per-file options. They are very rarely needed, and the only reasonable use cases I can imagine are use of the encode backend (mplayer encode branch), or for debugging. The normal use case is made harder, and the feature is perceived as bug. Even worse, correct usage is hard to explain for users. Make all options global by default. The position of an option isn't significant anymore (except for options that compensate each other, consider --shuffle --no-shuffle). One other important change is that no options are reset anymore if a new file is started. If you change settings with slave mode commands, they will not be changed by playing a new file. (Exceptions include settings that are too file specific, like audio/subtitle stream selection.) There is still some need for per-file options. Debugging and encoding are use cases that profit from per-file options. Per-file profiles (as well as per-protocol and per-VO/AO options) need the implementation related mechanisms to backup and restore options when the playback file changes. Simplify the save-slot stuff, which is possible because there is no hierarchical play tree anymore. Now there's a simple backup field. Add a way to specify per-file options on command line. Example: mplayer f1.mkv -o0 --{ -o1 f2.mkv -o2 f3.mkv --} f4.mkv -o3 will have the following options per file set: f1.mkv, f4.mkv: -o0 -o3 f2.mkv, f3.mkv: -o0 -o3 -o1 -o2 The options --{ and --} start and end per-file options. All files inside the { } will be affected by the options equally (similar to how global options and multiple files are handled). When playback of a file starts, the per-file options are set according to the command line. When playback ends, the per-file options are restored to the values when playback started.
2012-07-31 19:33:26 +00:00
return false;
} else { // Comments
char* c;
c = strchr(line,'-');
if(c) {
if (strncmp(c,"--!>",4) == 0) { // End of comments
comments = 0;
line = c+4;
if(line[0] != '\0') // There is some more data on this line : keep it
get_line = 0;
} else {
line = c+1; // Jump the -
if(line[0] != '\0') // Some more data
get_line = 0;
else // End of line
get_line = 1;
}
} else // No - on this line (or rest of line) : get next one
get_line = 1;
}
}
mp_msg(MSGT_PLAYTREE,MSGL_V,"Detected asx format\n");
// We have an asx : load it in memory and parse
while((line = play_tree_parser_get_line(p)) != NULL)
/* NOTHING */;
mp_msg(MSGT_PLAYTREE,MSGL_DBG3,"Parsing asx file: [%s]\n",p->buffer);
mplayer: turn playtree into a list, and change per-file option handling Summary: - There is no playtree anymore. It's reduced to a simple list. - Options are now always global. You can still have per-file options, but these are optional and require special syntax. - The slave command pt_step has been removed, and playlist_next and playlist_prev added. (See etc/input.conf changes.) This is a user visible incompatible change, and will break slave-mode applications. - The pt_clear slave command is renamed to playlist_clear. - Playtree entries could have multiple files. This is not the case anymore, and playlist entries have always exactly one entry. Whenever something adds more than one file (like ASX playlists or dvd:// or dvdnav:// on the command line), all files are added as separate playlist entries. Note that some of the changes are quite deep and violent. Expect regressions. The playlist parsing code in particular is of low quality. I didn't try to improve it, and merely spent to least effort necessary to keep it somehow working. (Especially ASX playlist handling.) The playtree code was complicated and bloated. It was also barely used. Most users don't even know that mplayer manages the playlist as tree, or how to use it. The most obscure features was probably specifying a tree on command line (with '{' and '}' to create/close tree nodes). It filled the player code with complexity and confused users with weird slave commands like pt_up. Replace the playtree with a simple flat playlist. Playlist parsers that actually return trees are changed to append all files to the playlist pre-order. It used to be the responsibility of the playtree code to change per-file config options. Now this is done by the player core, and the playlist code is free of such details. Options are not per-file by default anymore. This was a very obscure and complicated feature that confused even experienced users. Consider the following command line: mplayer file1.mkv file2.mkv --no-audio file3.mkv This will disable the audio for file2.mkv only, because options are per-file by default. To make the option affect all files, you're supposed to put it before the first file. This is bad, because normally you don't need per-file options. They are very rarely needed, and the only reasonable use cases I can imagine are use of the encode backend (mplayer encode branch), or for debugging. The normal use case is made harder, and the feature is perceived as bug. Even worse, correct usage is hard to explain for users. Make all options global by default. The position of an option isn't significant anymore (except for options that compensate each other, consider --shuffle --no-shuffle). One other important change is that no options are reset anymore if a new file is started. If you change settings with slave mode commands, they will not be changed by playing a new file. (Exceptions include settings that are too file specific, like audio/subtitle stream selection.) There is still some need for per-file options. Debugging and encoding are use cases that profit from per-file options. Per-file profiles (as well as per-protocol and per-VO/AO options) need the implementation related mechanisms to backup and restore options when the playback file changes. Simplify the save-slot stuff, which is possible because there is no hierarchical play tree anymore. Now there's a simple backup field. Add a way to specify per-file options on command line. Example: mplayer f1.mkv -o0 --{ -o1 f2.mkv -o2 f3.mkv --} f4.mkv -o3 will have the following options per file set: f1.mkv, f4.mkv: -o0 -o3 f2.mkv, f3.mkv: -o0 -o3 -o1 -o2 The options --{ and --} start and end per-file options. All files inside the { } will be affected by the options equally (similar to how global options and multiple files are handled). When playback of a file starts, the per-file options are set according to the command line. When playback ends, the per-file options are restored to the values when playback started.
2012-07-31 19:33:26 +00:00
return asx_parse(p->buffer,p->pl);
}
static char*
pls_entry_get_value(char* line) {
char* i;
i = strchr(line,'=');
if(!i || i[1] == '\0')
return NULL;
else
return i+1;
}
typedef struct pls_entry {
char* file;
char* title;
char* length;
} pls_entry_t;
static int
pls_read_entry(char* line,pls_entry_t** _e,int* _max_entry,char** val) {
int num,max_entry = (*_max_entry);
pls_entry_t* e = (*_e);
int limit = INT_MAX / sizeof(*e);
char* v;
v = pls_entry_get_value(line);
if(!v) {
mp_msg(MSGT_PLAYTREE,MSGL_ERR,"No value in entry %s\n",line);
return -1;
}
num = atoi(line);
if(num <= 0 || num > limit) {
if (max_entry >= limit) {
mp_msg(MSGT_PLAYTREE, MSGL_WARN, "Too many index entries\n");
return -1;
}
num = max_entry+1;
mp_msg(MSGT_PLAYTREE,MSGL_WARN,"No or invalid entry index in entry %s\nAssuming %d\n",line,num);
}
if(num > max_entry) {
e = realloc(e, num * sizeof(pls_entry_t));
if (!e)
return -1;
memset(&e[max_entry],0,(num-max_entry)*sizeof(pls_entry_t));
max_entry = num;
}
(*_e) = e;
(*_max_entry) = max_entry;
(*val) = v;
return num;
}
mplayer: turn playtree into a list, and change per-file option handling Summary: - There is no playtree anymore. It's reduced to a simple list. - Options are now always global. You can still have per-file options, but these are optional and require special syntax. - The slave command pt_step has been removed, and playlist_next and playlist_prev added. (See etc/input.conf changes.) This is a user visible incompatible change, and will break slave-mode applications. - The pt_clear slave command is renamed to playlist_clear. - Playtree entries could have multiple files. This is not the case anymore, and playlist entries have always exactly one entry. Whenever something adds more than one file (like ASX playlists or dvd:// or dvdnav:// on the command line), all files are added as separate playlist entries. Note that some of the changes are quite deep and violent. Expect regressions. The playlist parsing code in particular is of low quality. I didn't try to improve it, and merely spent to least effort necessary to keep it somehow working. (Especially ASX playlist handling.) The playtree code was complicated and bloated. It was also barely used. Most users don't even know that mplayer manages the playlist as tree, or how to use it. The most obscure features was probably specifying a tree on command line (with '{' and '}' to create/close tree nodes). It filled the player code with complexity and confused users with weird slave commands like pt_up. Replace the playtree with a simple flat playlist. Playlist parsers that actually return trees are changed to append all files to the playlist pre-order. It used to be the responsibility of the playtree code to change per-file config options. Now this is done by the player core, and the playlist code is free of such details. Options are not per-file by default anymore. This was a very obscure and complicated feature that confused even experienced users. Consider the following command line: mplayer file1.mkv file2.mkv --no-audio file3.mkv This will disable the audio for file2.mkv only, because options are per-file by default. To make the option affect all files, you're supposed to put it before the first file. This is bad, because normally you don't need per-file options. They are very rarely needed, and the only reasonable use cases I can imagine are use of the encode backend (mplayer encode branch), or for debugging. The normal use case is made harder, and the feature is perceived as bug. Even worse, correct usage is hard to explain for users. Make all options global by default. The position of an option isn't significant anymore (except for options that compensate each other, consider --shuffle --no-shuffle). One other important change is that no options are reset anymore if a new file is started. If you change settings with slave mode commands, they will not be changed by playing a new file. (Exceptions include settings that are too file specific, like audio/subtitle stream selection.) There is still some need for per-file options. Debugging and encoding are use cases that profit from per-file options. Per-file profiles (as well as per-protocol and per-VO/AO options) need the implementation related mechanisms to backup and restore options when the playback file changes. Simplify the save-slot stuff, which is possible because there is no hierarchical play tree anymore. Now there's a simple backup field. Add a way to specify per-file options on command line. Example: mplayer f1.mkv -o0 --{ -o1 f2.mkv -o2 f3.mkv --} f4.mkv -o3 will have the following options per file set: f1.mkv, f4.mkv: -o0 -o3 f2.mkv, f3.mkv: -o0 -o3 -o1 -o2 The options --{ and --} start and end per-file options. All files inside the { } will be affected by the options equally (similar to how global options and multiple files are handled). When playback of a file starts, the per-file options are set according to the command line. When playback ends, the per-file options are restored to the values when playback started.
2012-07-31 19:33:26 +00:00
static bool parse_pls(play_tree_parser_t* p) {
char *line,*v;
pls_entry_t* entries = NULL;
int n_entries = 0,max_entry=0,num;
mp_msg(MSGT_PLAYTREE,MSGL_V,"Trying Winamp playlist...\n");
while((line = play_tree_parser_get_line(p))) {
strstrip(line);
if(strlen(line))
break;
}
if (!line)
mplayer: turn playtree into a list, and change per-file option handling Summary: - There is no playtree anymore. It's reduced to a simple list. - Options are now always global. You can still have per-file options, but these are optional and require special syntax. - The slave command pt_step has been removed, and playlist_next and playlist_prev added. (See etc/input.conf changes.) This is a user visible incompatible change, and will break slave-mode applications. - The pt_clear slave command is renamed to playlist_clear. - Playtree entries could have multiple files. This is not the case anymore, and playlist entries have always exactly one entry. Whenever something adds more than one file (like ASX playlists or dvd:// or dvdnav:// on the command line), all files are added as separate playlist entries. Note that some of the changes are quite deep and violent. Expect regressions. The playlist parsing code in particular is of low quality. I didn't try to improve it, and merely spent to least effort necessary to keep it somehow working. (Especially ASX playlist handling.) The playtree code was complicated and bloated. It was also barely used. Most users don't even know that mplayer manages the playlist as tree, or how to use it. The most obscure features was probably specifying a tree on command line (with '{' and '}' to create/close tree nodes). It filled the player code with complexity and confused users with weird slave commands like pt_up. Replace the playtree with a simple flat playlist. Playlist parsers that actually return trees are changed to append all files to the playlist pre-order. It used to be the responsibility of the playtree code to change per-file config options. Now this is done by the player core, and the playlist code is free of such details. Options are not per-file by default anymore. This was a very obscure and complicated feature that confused even experienced users. Consider the following command line: mplayer file1.mkv file2.mkv --no-audio file3.mkv This will disable the audio for file2.mkv only, because options are per-file by default. To make the option affect all files, you're supposed to put it before the first file. This is bad, because normally you don't need per-file options. They are very rarely needed, and the only reasonable use cases I can imagine are use of the encode backend (mplayer encode branch), or for debugging. The normal use case is made harder, and the feature is perceived as bug. Even worse, correct usage is hard to explain for users. Make all options global by default. The position of an option isn't significant anymore (except for options that compensate each other, consider --shuffle --no-shuffle). One other important change is that no options are reset anymore if a new file is started. If you change settings with slave mode commands, they will not be changed by playing a new file. (Exceptions include settings that are too file specific, like audio/subtitle stream selection.) There is still some need for per-file options. Debugging and encoding are use cases that profit from per-file options. Per-file profiles (as well as per-protocol and per-VO/AO options) need the implementation related mechanisms to backup and restore options when the playback file changes. Simplify the save-slot stuff, which is possible because there is no hierarchical play tree anymore. Now there's a simple backup field. Add a way to specify per-file options on command line. Example: mplayer f1.mkv -o0 --{ -o1 f2.mkv -o2 f3.mkv --} f4.mkv -o3 will have the following options per file set: f1.mkv, f4.mkv: -o0 -o3 f2.mkv, f3.mkv: -o0 -o3 -o1 -o2 The options --{ and --} start and end per-file options. All files inside the { } will be affected by the options equally (similar to how global options and multiple files are handled). When playback of a file starts, the per-file options are set according to the command line. When playback ends, the per-file options are restored to the values when playback started.
2012-07-31 19:33:26 +00:00
return false;
if(strcasecmp(line,"[playlist]"))
mplayer: turn playtree into a list, and change per-file option handling Summary: - There is no playtree anymore. It's reduced to a simple list. - Options are now always global. You can still have per-file options, but these are optional and require special syntax. - The slave command pt_step has been removed, and playlist_next and playlist_prev added. (See etc/input.conf changes.) This is a user visible incompatible change, and will break slave-mode applications. - The pt_clear slave command is renamed to playlist_clear. - Playtree entries could have multiple files. This is not the case anymore, and playlist entries have always exactly one entry. Whenever something adds more than one file (like ASX playlists or dvd:// or dvdnav:// on the command line), all files are added as separate playlist entries. Note that some of the changes are quite deep and violent. Expect regressions. The playlist parsing code in particular is of low quality. I didn't try to improve it, and merely spent to least effort necessary to keep it somehow working. (Especially ASX playlist handling.) The playtree code was complicated and bloated. It was also barely used. Most users don't even know that mplayer manages the playlist as tree, or how to use it. The most obscure features was probably specifying a tree on command line (with '{' and '}' to create/close tree nodes). It filled the player code with complexity and confused users with weird slave commands like pt_up. Replace the playtree with a simple flat playlist. Playlist parsers that actually return trees are changed to append all files to the playlist pre-order. It used to be the responsibility of the playtree code to change per-file config options. Now this is done by the player core, and the playlist code is free of such details. Options are not per-file by default anymore. This was a very obscure and complicated feature that confused even experienced users. Consider the following command line: mplayer file1.mkv file2.mkv --no-audio file3.mkv This will disable the audio for file2.mkv only, because options are per-file by default. To make the option affect all files, you're supposed to put it before the first file. This is bad, because normally you don't need per-file options. They are very rarely needed, and the only reasonable use cases I can imagine are use of the encode backend (mplayer encode branch), or for debugging. The normal use case is made harder, and the feature is perceived as bug. Even worse, correct usage is hard to explain for users. Make all options global by default. The position of an option isn't significant anymore (except for options that compensate each other, consider --shuffle --no-shuffle). One other important change is that no options are reset anymore if a new file is started. If you change settings with slave mode commands, they will not be changed by playing a new file. (Exceptions include settings that are too file specific, like audio/subtitle stream selection.) There is still some need for per-file options. Debugging and encoding are use cases that profit from per-file options. Per-file profiles (as well as per-protocol and per-VO/AO options) need the implementation related mechanisms to backup and restore options when the playback file changes. Simplify the save-slot stuff, which is possible because there is no hierarchical play tree anymore. Now there's a simple backup field. Add a way to specify per-file options on command line. Example: mplayer f1.mkv -o0 --{ -o1 f2.mkv -o2 f3.mkv --} f4.mkv -o3 will have the following options per file set: f1.mkv, f4.mkv: -o0 -o3 f2.mkv, f3.mkv: -o0 -o3 -o1 -o2 The options --{ and --} start and end per-file options. All files inside the { } will be affected by the options equally (similar to how global options and multiple files are handled). When playback of a file starts, the per-file options are set according to the command line. When playback ends, the per-file options are restored to the values when playback started.
2012-07-31 19:33:26 +00:00
return false;
mp_msg(MSGT_PLAYTREE,MSGL_V,"Detected Winamp playlist format\n");
play_tree_parser_stop_keeping(p);
line = play_tree_parser_get_line(p);
if(!line)
mplayer: turn playtree into a list, and change per-file option handling Summary: - There is no playtree anymore. It's reduced to a simple list. - Options are now always global. You can still have per-file options, but these are optional and require special syntax. - The slave command pt_step has been removed, and playlist_next and playlist_prev added. (See etc/input.conf changes.) This is a user visible incompatible change, and will break slave-mode applications. - The pt_clear slave command is renamed to playlist_clear. - Playtree entries could have multiple files. This is not the case anymore, and playlist entries have always exactly one entry. Whenever something adds more than one file (like ASX playlists or dvd:// or dvdnav:// on the command line), all files are added as separate playlist entries. Note that some of the changes are quite deep and violent. Expect regressions. The playlist parsing code in particular is of low quality. I didn't try to improve it, and merely spent to least effort necessary to keep it somehow working. (Especially ASX playlist handling.) The playtree code was complicated and bloated. It was also barely used. Most users don't even know that mplayer manages the playlist as tree, or how to use it. The most obscure features was probably specifying a tree on command line (with '{' and '}' to create/close tree nodes). It filled the player code with complexity and confused users with weird slave commands like pt_up. Replace the playtree with a simple flat playlist. Playlist parsers that actually return trees are changed to append all files to the playlist pre-order. It used to be the responsibility of the playtree code to change per-file config options. Now this is done by the player core, and the playlist code is free of such details. Options are not per-file by default anymore. This was a very obscure and complicated feature that confused even experienced users. Consider the following command line: mplayer file1.mkv file2.mkv --no-audio file3.mkv This will disable the audio for file2.mkv only, because options are per-file by default. To make the option affect all files, you're supposed to put it before the first file. This is bad, because normally you don't need per-file options. They are very rarely needed, and the only reasonable use cases I can imagine are use of the encode backend (mplayer encode branch), or for debugging. The normal use case is made harder, and the feature is perceived as bug. Even worse, correct usage is hard to explain for users. Make all options global by default. The position of an option isn't significant anymore (except for options that compensate each other, consider --shuffle --no-shuffle). One other important change is that no options are reset anymore if a new file is started. If you change settings with slave mode commands, they will not be changed by playing a new file. (Exceptions include settings that are too file specific, like audio/subtitle stream selection.) There is still some need for per-file options. Debugging and encoding are use cases that profit from per-file options. Per-file profiles (as well as per-protocol and per-VO/AO options) need the implementation related mechanisms to backup and restore options when the playback file changes. Simplify the save-slot stuff, which is possible because there is no hierarchical play tree anymore. Now there's a simple backup field. Add a way to specify per-file options on command line. Example: mplayer f1.mkv -o0 --{ -o1 f2.mkv -o2 f3.mkv --} f4.mkv -o3 will have the following options per file set: f1.mkv, f4.mkv: -o0 -o3 f2.mkv, f3.mkv: -o0 -o3 -o1 -o2 The options --{ and --} start and end per-file options. All files inside the { } will be affected by the options equally (similar to how global options and multiple files are handled). When playback of a file starts, the per-file options are set according to the command line. When playback ends, the per-file options are restored to the values when playback started.
2012-07-31 19:33:26 +00:00
return false;
strstrip(line);
if(strncasecmp(line,"NumberOfEntries",15) == 0) {
v = pls_entry_get_value(line);
n_entries = atoi(v);
if(n_entries < 0)
mp_msg(MSGT_PLAYTREE,MSGL_DBG2,"Invalid number of entries: very funny!!!\n");
else
mp_msg(MSGT_PLAYTREE,MSGL_DBG2,"Playlist claims to have %d entries. Let's see.\n",n_entries);
line = play_tree_parser_get_line(p);
}
while(line) {
strstrip(line);
if(line[0] == '\0') {
line = play_tree_parser_get_line(p);
continue;
}
if(strncasecmp(line,"File",4) == 0) {
num = pls_read_entry(line+4,&entries,&max_entry,&v);
if(num < 0)
mp_msg(MSGT_PLAYTREE,MSGL_ERR,"No value in entry %s\n",line);
else
entries[num-1].file = strdup(v);
} else if(strncasecmp(line,"Title",5) == 0) {
num = pls_read_entry(line+5,&entries,&max_entry,&v);
if(num < 0)
mp_msg(MSGT_PLAYTREE,MSGL_ERR,"No value in entry %s\n",line);
else
entries[num-1].title = strdup(v);
} else if(strncasecmp(line,"Length",6) == 0) {
num = pls_read_entry(line+6,&entries,&max_entry,&v);
if(num < 0)
mp_msg(MSGT_PLAYTREE,MSGL_ERR,"No value in entry %s\n",line);
else {
char *end;
long val = strtol(v, &end, 10);
if (*end || (val <= 0 && val != -1))
mp_msg(MSGT_PLAYTREE,MSGL_ERR,"Invalid length value in entry %s\n",line);
else if (val > 0)
entries[num-1].length = strdup(v);
}
} else
mp_msg(MSGT_PLAYTREE,MSGL_WARN,"Unknown entry type %s\n",line);
line = play_tree_parser_get_line(p);
}
for(num = 0; num < max_entry ; num++) {
if(entries[num].file == NULL)
mp_msg(MSGT_PLAYTREE,MSGL_ERR,"Entry %d don't have a file !!!!\n",num+1);
else {
mp_msg(MSGT_PLAYTREE,MSGL_DBG2,"Adding entry %s\n",entries[num].file);
mplayer: turn playtree into a list, and change per-file option handling Summary: - There is no playtree anymore. It's reduced to a simple list. - Options are now always global. You can still have per-file options, but these are optional and require special syntax. - The slave command pt_step has been removed, and playlist_next and playlist_prev added. (See etc/input.conf changes.) This is a user visible incompatible change, and will break slave-mode applications. - The pt_clear slave command is renamed to playlist_clear. - Playtree entries could have multiple files. This is not the case anymore, and playlist entries have always exactly one entry. Whenever something adds more than one file (like ASX playlists or dvd:// or dvdnav:// on the command line), all files are added as separate playlist entries. Note that some of the changes are quite deep and violent. Expect regressions. The playlist parsing code in particular is of low quality. I didn't try to improve it, and merely spent to least effort necessary to keep it somehow working. (Especially ASX playlist handling.) The playtree code was complicated and bloated. It was also barely used. Most users don't even know that mplayer manages the playlist as tree, or how to use it. The most obscure features was probably specifying a tree on command line (with '{' and '}' to create/close tree nodes). It filled the player code with complexity and confused users with weird slave commands like pt_up. Replace the playtree with a simple flat playlist. Playlist parsers that actually return trees are changed to append all files to the playlist pre-order. It used to be the responsibility of the playtree code to change per-file config options. Now this is done by the player core, and the playlist code is free of such details. Options are not per-file by default anymore. This was a very obscure and complicated feature that confused even experienced users. Consider the following command line: mplayer file1.mkv file2.mkv --no-audio file3.mkv This will disable the audio for file2.mkv only, because options are per-file by default. To make the option affect all files, you're supposed to put it before the first file. This is bad, because normally you don't need per-file options. They are very rarely needed, and the only reasonable use cases I can imagine are use of the encode backend (mplayer encode branch), or for debugging. The normal use case is made harder, and the feature is perceived as bug. Even worse, correct usage is hard to explain for users. Make all options global by default. The position of an option isn't significant anymore (except for options that compensate each other, consider --shuffle --no-shuffle). One other important change is that no options are reset anymore if a new file is started. If you change settings with slave mode commands, they will not be changed by playing a new file. (Exceptions include settings that are too file specific, like audio/subtitle stream selection.) There is still some need for per-file options. Debugging and encoding are use cases that profit from per-file options. Per-file profiles (as well as per-protocol and per-VO/AO options) need the implementation related mechanisms to backup and restore options when the playback file changes. Simplify the save-slot stuff, which is possible because there is no hierarchical play tree anymore. Now there's a simple backup field. Add a way to specify per-file options on command line. Example: mplayer f1.mkv -o0 --{ -o1 f2.mkv -o2 f3.mkv --} f4.mkv -o3 will have the following options per file set: f1.mkv, f4.mkv: -o0 -o3 f2.mkv, f3.mkv: -o0 -o3 -o1 -o2 The options --{ and --} start and end per-file options. All files inside the { } will be affected by the options equally (similar to how global options and multiple files are handled). When playback of a file starts, the per-file options are set according to the command line. When playback ends, the per-file options are restored to the values when playback started.
2012-07-31 19:33:26 +00:00
playlist_add_file(p->pl,entries[num].file);
if (entries[num].length)
playlist_entry_add_param(p->pl->last, bstr0("end"), bstr0(entries[num].length));
free(entries[num].file);
}
// When we have info in playtree we add these info
free(entries[num].title);
free(entries[num].length);
}
free(entries);
mplayer: turn playtree into a list, and change per-file option handling Summary: - There is no playtree anymore. It's reduced to a simple list. - Options are now always global. You can still have per-file options, but these are optional and require special syntax. - The slave command pt_step has been removed, and playlist_next and playlist_prev added. (See etc/input.conf changes.) This is a user visible incompatible change, and will break slave-mode applications. - The pt_clear slave command is renamed to playlist_clear. - Playtree entries could have multiple files. This is not the case anymore, and playlist entries have always exactly one entry. Whenever something adds more than one file (like ASX playlists or dvd:// or dvdnav:// on the command line), all files are added as separate playlist entries. Note that some of the changes are quite deep and violent. Expect regressions. The playlist parsing code in particular is of low quality. I didn't try to improve it, and merely spent to least effort necessary to keep it somehow working. (Especially ASX playlist handling.) The playtree code was complicated and bloated. It was also barely used. Most users don't even know that mplayer manages the playlist as tree, or how to use it. The most obscure features was probably specifying a tree on command line (with '{' and '}' to create/close tree nodes). It filled the player code with complexity and confused users with weird slave commands like pt_up. Replace the playtree with a simple flat playlist. Playlist parsers that actually return trees are changed to append all files to the playlist pre-order. It used to be the responsibility of the playtree code to change per-file config options. Now this is done by the player core, and the playlist code is free of such details. Options are not per-file by default anymore. This was a very obscure and complicated feature that confused even experienced users. Consider the following command line: mplayer file1.mkv file2.mkv --no-audio file3.mkv This will disable the audio for file2.mkv only, because options are per-file by default. To make the option affect all files, you're supposed to put it before the first file. This is bad, because normally you don't need per-file options. They are very rarely needed, and the only reasonable use cases I can imagine are use of the encode backend (mplayer encode branch), or for debugging. The normal use case is made harder, and the feature is perceived as bug. Even worse, correct usage is hard to explain for users. Make all options global by default. The position of an option isn't significant anymore (except for options that compensate each other, consider --shuffle --no-shuffle). One other important change is that no options are reset anymore if a new file is started. If you change settings with slave mode commands, they will not be changed by playing a new file. (Exceptions include settings that are too file specific, like audio/subtitle stream selection.) There is still some need for per-file options. Debugging and encoding are use cases that profit from per-file options. Per-file profiles (as well as per-protocol and per-VO/AO options) need the implementation related mechanisms to backup and restore options when the playback file changes. Simplify the save-slot stuff, which is possible because there is no hierarchical play tree anymore. Now there's a simple backup field. Add a way to specify per-file options on command line. Example: mplayer f1.mkv -o0 --{ -o1 f2.mkv -o2 f3.mkv --} f4.mkv -o3 will have the following options per file set: f1.mkv, f4.mkv: -o0 -o3 f2.mkv, f3.mkv: -o0 -o3 -o1 -o2 The options --{ and --} start and end per-file options. All files inside the { } will be affected by the options equally (similar to how global options and multiple files are handled). When playback of a file starts, the per-file options are set according to the command line. When playback ends, the per-file options are restored to the values when playback started.
2012-07-31 19:33:26 +00:00
return true;
}
/*
Reference Ini-Format: Each entry is assumed a reference
*/
mplayer: turn playtree into a list, and change per-file option handling Summary: - There is no playtree anymore. It's reduced to a simple list. - Options are now always global. You can still have per-file options, but these are optional and require special syntax. - The slave command pt_step has been removed, and playlist_next and playlist_prev added. (See etc/input.conf changes.) This is a user visible incompatible change, and will break slave-mode applications. - The pt_clear slave command is renamed to playlist_clear. - Playtree entries could have multiple files. This is not the case anymore, and playlist entries have always exactly one entry. Whenever something adds more than one file (like ASX playlists or dvd:// or dvdnav:// on the command line), all files are added as separate playlist entries. Note that some of the changes are quite deep and violent. Expect regressions. The playlist parsing code in particular is of low quality. I didn't try to improve it, and merely spent to least effort necessary to keep it somehow working. (Especially ASX playlist handling.) The playtree code was complicated and bloated. It was also barely used. Most users don't even know that mplayer manages the playlist as tree, or how to use it. The most obscure features was probably specifying a tree on command line (with '{' and '}' to create/close tree nodes). It filled the player code with complexity and confused users with weird slave commands like pt_up. Replace the playtree with a simple flat playlist. Playlist parsers that actually return trees are changed to append all files to the playlist pre-order. It used to be the responsibility of the playtree code to change per-file config options. Now this is done by the player core, and the playlist code is free of such details. Options are not per-file by default anymore. This was a very obscure and complicated feature that confused even experienced users. Consider the following command line: mplayer file1.mkv file2.mkv --no-audio file3.mkv This will disable the audio for file2.mkv only, because options are per-file by default. To make the option affect all files, you're supposed to put it before the first file. This is bad, because normally you don't need per-file options. They are very rarely needed, and the only reasonable use cases I can imagine are use of the encode backend (mplayer encode branch), or for debugging. The normal use case is made harder, and the feature is perceived as bug. Even worse, correct usage is hard to explain for users. Make all options global by default. The position of an option isn't significant anymore (except for options that compensate each other, consider --shuffle --no-shuffle). One other important change is that no options are reset anymore if a new file is started. If you change settings with slave mode commands, they will not be changed by playing a new file. (Exceptions include settings that are too file specific, like audio/subtitle stream selection.) There is still some need for per-file options. Debugging and encoding are use cases that profit from per-file options. Per-file profiles (as well as per-protocol and per-VO/AO options) need the implementation related mechanisms to backup and restore options when the playback file changes. Simplify the save-slot stuff, which is possible because there is no hierarchical play tree anymore. Now there's a simple backup field. Add a way to specify per-file options on command line. Example: mplayer f1.mkv -o0 --{ -o1 f2.mkv -o2 f3.mkv --} f4.mkv -o3 will have the following options per file set: f1.mkv, f4.mkv: -o0 -o3 f2.mkv, f3.mkv: -o0 -o3 -o1 -o2 The options --{ and --} start and end per-file options. All files inside the { } will be affected by the options equally (similar to how global options and multiple files are handled). When playback of a file starts, the per-file options are set according to the command line. When playback ends, the per-file options are restored to the values when playback started.
2012-07-31 19:33:26 +00:00
static bool parse_ref_ini(play_tree_parser_t* p) {
char *line,*v;
mp_msg(MSGT_PLAYTREE,MSGL_V,"Trying reference-ini playlist...\n");
if (!(line = play_tree_parser_get_line(p)))
return NULL;
strstrip(line);
if(strcasecmp(line,"[Reference]"))
return NULL;
mp_msg(MSGT_PLAYTREE,MSGL_V,"Detected reference-ini playlist format\n");
play_tree_parser_stop_keeping(p);
line = play_tree_parser_get_line(p);
if(!line)
return NULL;
while(line) {
strstrip(line);
if(strncasecmp(line,"Ref",3) == 0) {
v = pls_entry_get_value(line+3);
if(!v)
mp_msg(MSGT_PLAYTREE,MSGL_ERR,"No value in entry %s\n",line);
else
{
mp_msg(MSGT_PLAYTREE,MSGL_DBG2,"Adding entry %s\n",v);
mplayer: turn playtree into a list, and change per-file option handling Summary: - There is no playtree anymore. It's reduced to a simple list. - Options are now always global. You can still have per-file options, but these are optional and require special syntax. - The slave command pt_step has been removed, and playlist_next and playlist_prev added. (See etc/input.conf changes.) This is a user visible incompatible change, and will break slave-mode applications. - The pt_clear slave command is renamed to playlist_clear. - Playtree entries could have multiple files. This is not the case anymore, and playlist entries have always exactly one entry. Whenever something adds more than one file (like ASX playlists or dvd:// or dvdnav:// on the command line), all files are added as separate playlist entries. Note that some of the changes are quite deep and violent. Expect regressions. The playlist parsing code in particular is of low quality. I didn't try to improve it, and merely spent to least effort necessary to keep it somehow working. (Especially ASX playlist handling.) The playtree code was complicated and bloated. It was also barely used. Most users don't even know that mplayer manages the playlist as tree, or how to use it. The most obscure features was probably specifying a tree on command line (with '{' and '}' to create/close tree nodes). It filled the player code with complexity and confused users with weird slave commands like pt_up. Replace the playtree with a simple flat playlist. Playlist parsers that actually return trees are changed to append all files to the playlist pre-order. It used to be the responsibility of the playtree code to change per-file config options. Now this is done by the player core, and the playlist code is free of such details. Options are not per-file by default anymore. This was a very obscure and complicated feature that confused even experienced users. Consider the following command line: mplayer file1.mkv file2.mkv --no-audio file3.mkv This will disable the audio for file2.mkv only, because options are per-file by default. To make the option affect all files, you're supposed to put it before the first file. This is bad, because normally you don't need per-file options. They are very rarely needed, and the only reasonable use cases I can imagine are use of the encode backend (mplayer encode branch), or for debugging. The normal use case is made harder, and the feature is perceived as bug. Even worse, correct usage is hard to explain for users. Make all options global by default. The position of an option isn't significant anymore (except for options that compensate each other, consider --shuffle --no-shuffle). One other important change is that no options are reset anymore if a new file is started. If you change settings with slave mode commands, they will not be changed by playing a new file. (Exceptions include settings that are too file specific, like audio/subtitle stream selection.) There is still some need for per-file options. Debugging and encoding are use cases that profit from per-file options. Per-file profiles (as well as per-protocol and per-VO/AO options) need the implementation related mechanisms to backup and restore options when the playback file changes. Simplify the save-slot stuff, which is possible because there is no hierarchical play tree anymore. Now there's a simple backup field. Add a way to specify per-file options on command line. Example: mplayer f1.mkv -o0 --{ -o1 f2.mkv -o2 f3.mkv --} f4.mkv -o3 will have the following options per file set: f1.mkv, f4.mkv: -o0 -o3 f2.mkv, f3.mkv: -o0 -o3 -o1 -o2 The options --{ and --} start and end per-file options. All files inside the { } will be affected by the options equally (similar to how global options and multiple files are handled). When playback of a file starts, the per-file options are set according to the command line. When playback ends, the per-file options are restored to the values when playback started.
2012-07-31 19:33:26 +00:00
playlist_add_file(p->pl, v);
}
}
line = play_tree_parser_get_line(p);
}
mplayer: turn playtree into a list, and change per-file option handling Summary: - There is no playtree anymore. It's reduced to a simple list. - Options are now always global. You can still have per-file options, but these are optional and require special syntax. - The slave command pt_step has been removed, and playlist_next and playlist_prev added. (See etc/input.conf changes.) This is a user visible incompatible change, and will break slave-mode applications. - The pt_clear slave command is renamed to playlist_clear. - Playtree entries could have multiple files. This is not the case anymore, and playlist entries have always exactly one entry. Whenever something adds more than one file (like ASX playlists or dvd:// or dvdnav:// on the command line), all files are added as separate playlist entries. Note that some of the changes are quite deep and violent. Expect regressions. The playlist parsing code in particular is of low quality. I didn't try to improve it, and merely spent to least effort necessary to keep it somehow working. (Especially ASX playlist handling.) The playtree code was complicated and bloated. It was also barely used. Most users don't even know that mplayer manages the playlist as tree, or how to use it. The most obscure features was probably specifying a tree on command line (with '{' and '}' to create/close tree nodes). It filled the player code with complexity and confused users with weird slave commands like pt_up. Replace the playtree with a simple flat playlist. Playlist parsers that actually return trees are changed to append all files to the playlist pre-order. It used to be the responsibility of the playtree code to change per-file config options. Now this is done by the player core, and the playlist code is free of such details. Options are not per-file by default anymore. This was a very obscure and complicated feature that confused even experienced users. Consider the following command line: mplayer file1.mkv file2.mkv --no-audio file3.mkv This will disable the audio for file2.mkv only, because options are per-file by default. To make the option affect all files, you're supposed to put it before the first file. This is bad, because normally you don't need per-file options. They are very rarely needed, and the only reasonable use cases I can imagine are use of the encode backend (mplayer encode branch), or for debugging. The normal use case is made harder, and the feature is perceived as bug. Even worse, correct usage is hard to explain for users. Make all options global by default. The position of an option isn't significant anymore (except for options that compensate each other, consider --shuffle --no-shuffle). One other important change is that no options are reset anymore if a new file is started. If you change settings with slave mode commands, they will not be changed by playing a new file. (Exceptions include settings that are too file specific, like audio/subtitle stream selection.) There is still some need for per-file options. Debugging and encoding are use cases that profit from per-file options. Per-file profiles (as well as per-protocol and per-VO/AO options) need the implementation related mechanisms to backup and restore options when the playback file changes. Simplify the save-slot stuff, which is possible because there is no hierarchical play tree anymore. Now there's a simple backup field. Add a way to specify per-file options on command line. Example: mplayer f1.mkv -o0 --{ -o1 f2.mkv -o2 f3.mkv --} f4.mkv -o3 will have the following options per file set: f1.mkv, f4.mkv: -o0 -o3 f2.mkv, f3.mkv: -o0 -o3 -o1 -o2 The options --{ and --} start and end per-file options. All files inside the { } will be affected by the options equally (similar to how global options and multiple files are handled). When playback of a file starts, the per-file options are set according to the command line. When playback ends, the per-file options are restored to the values when playback started.
2012-07-31 19:33:26 +00:00
return true;
}
mplayer: turn playtree into a list, and change per-file option handling Summary: - There is no playtree anymore. It's reduced to a simple list. - Options are now always global. You can still have per-file options, but these are optional and require special syntax. - The slave command pt_step has been removed, and playlist_next and playlist_prev added. (See etc/input.conf changes.) This is a user visible incompatible change, and will break slave-mode applications. - The pt_clear slave command is renamed to playlist_clear. - Playtree entries could have multiple files. This is not the case anymore, and playlist entries have always exactly one entry. Whenever something adds more than one file (like ASX playlists or dvd:// or dvdnav:// on the command line), all files are added as separate playlist entries. Note that some of the changes are quite deep and violent. Expect regressions. The playlist parsing code in particular is of low quality. I didn't try to improve it, and merely spent to least effort necessary to keep it somehow working. (Especially ASX playlist handling.) The playtree code was complicated and bloated. It was also barely used. Most users don't even know that mplayer manages the playlist as tree, or how to use it. The most obscure features was probably specifying a tree on command line (with '{' and '}' to create/close tree nodes). It filled the player code with complexity and confused users with weird slave commands like pt_up. Replace the playtree with a simple flat playlist. Playlist parsers that actually return trees are changed to append all files to the playlist pre-order. It used to be the responsibility of the playtree code to change per-file config options. Now this is done by the player core, and the playlist code is free of such details. Options are not per-file by default anymore. This was a very obscure and complicated feature that confused even experienced users. Consider the following command line: mplayer file1.mkv file2.mkv --no-audio file3.mkv This will disable the audio for file2.mkv only, because options are per-file by default. To make the option affect all files, you're supposed to put it before the first file. This is bad, because normally you don't need per-file options. They are very rarely needed, and the only reasonable use cases I can imagine are use of the encode backend (mplayer encode branch), or for debugging. The normal use case is made harder, and the feature is perceived as bug. Even worse, correct usage is hard to explain for users. Make all options global by default. The position of an option isn't significant anymore (except for options that compensate each other, consider --shuffle --no-shuffle). One other important change is that no options are reset anymore if a new file is started. If you change settings with slave mode commands, they will not be changed by playing a new file. (Exceptions include settings that are too file specific, like audio/subtitle stream selection.) There is still some need for per-file options. Debugging and encoding are use cases that profit from per-file options. Per-file profiles (as well as per-protocol and per-VO/AO options) need the implementation related mechanisms to backup and restore options when the playback file changes. Simplify the save-slot stuff, which is possible because there is no hierarchical play tree anymore. Now there's a simple backup field. Add a way to specify per-file options on command line. Example: mplayer f1.mkv -o0 --{ -o1 f2.mkv -o2 f3.mkv --} f4.mkv -o3 will have the following options per file set: f1.mkv, f4.mkv: -o0 -o3 f2.mkv, f3.mkv: -o0 -o3 -o1 -o2 The options --{ and --} start and end per-file options. All files inside the { } will be affected by the options equally (similar to how global options and multiple files are handled). When playback of a file starts, the per-file options are set according to the command line. When playback ends, the per-file options are restored to the values when playback started.
2012-07-31 19:33:26 +00:00
static bool parse_m3u(play_tree_parser_t* p) {
char* line;
mp_msg(MSGT_PLAYTREE,MSGL_V,"Trying extended m3u playlist...\n");
if (!(line = play_tree_parser_get_line(p)))
return NULL;
strstrip(line);
if(strcasecmp(line,"#EXTM3U"))
return NULL;
mp_msg(MSGT_PLAYTREE,MSGL_V,"Detected extended m3u playlist format\n");
play_tree_parser_stop_keeping(p);
while((line = play_tree_parser_get_line(p)) != NULL) {
strstrip(line);
if(line[0] == '\0')
continue;
/* EXTM3U files contain such lines:
* #EXTINF:<seconds>, <title>
* followed by a line with the filename
* for now we have no place to put that
* so we just skip that extra-info ::atmos
*/
if(line[0] == '#') {
#if 0 /* code functional */
if(strncasecmp(line,"#EXTINF:",8) == 0) {
mp_msg(MSGT_PLAYTREE,MSGL_INFO,"[M3U] Duration: %dsec Title: %s\n",
strtol(line+8,&line,10), line+2);
}
#endif
continue;
}
mplayer: turn playtree into a list, and change per-file option handling Summary: - There is no playtree anymore. It's reduced to a simple list. - Options are now always global. You can still have per-file options, but these are optional and require special syntax. - The slave command pt_step has been removed, and playlist_next and playlist_prev added. (See etc/input.conf changes.) This is a user visible incompatible change, and will break slave-mode applications. - The pt_clear slave command is renamed to playlist_clear. - Playtree entries could have multiple files. This is not the case anymore, and playlist entries have always exactly one entry. Whenever something adds more than one file (like ASX playlists or dvd:// or dvdnav:// on the command line), all files are added as separate playlist entries. Note that some of the changes are quite deep and violent. Expect regressions. The playlist parsing code in particular is of low quality. I didn't try to improve it, and merely spent to least effort necessary to keep it somehow working. (Especially ASX playlist handling.) The playtree code was complicated and bloated. It was also barely used. Most users don't even know that mplayer manages the playlist as tree, or how to use it. The most obscure features was probably specifying a tree on command line (with '{' and '}' to create/close tree nodes). It filled the player code with complexity and confused users with weird slave commands like pt_up. Replace the playtree with a simple flat playlist. Playlist parsers that actually return trees are changed to append all files to the playlist pre-order. It used to be the responsibility of the playtree code to change per-file config options. Now this is done by the player core, and the playlist code is free of such details. Options are not per-file by default anymore. This was a very obscure and complicated feature that confused even experienced users. Consider the following command line: mplayer file1.mkv file2.mkv --no-audio file3.mkv This will disable the audio for file2.mkv only, because options are per-file by default. To make the option affect all files, you're supposed to put it before the first file. This is bad, because normally you don't need per-file options. They are very rarely needed, and the only reasonable use cases I can imagine are use of the encode backend (mplayer encode branch), or for debugging. The normal use case is made harder, and the feature is perceived as bug. Even worse, correct usage is hard to explain for users. Make all options global by default. The position of an option isn't significant anymore (except for options that compensate each other, consider --shuffle --no-shuffle). One other important change is that no options are reset anymore if a new file is started. If you change settings with slave mode commands, they will not be changed by playing a new file. (Exceptions include settings that are too file specific, like audio/subtitle stream selection.) There is still some need for per-file options. Debugging and encoding are use cases that profit from per-file options. Per-file profiles (as well as per-protocol and per-VO/AO options) need the implementation related mechanisms to backup and restore options when the playback file changes. Simplify the save-slot stuff, which is possible because there is no hierarchical play tree anymore. Now there's a simple backup field. Add a way to specify per-file options on command line. Example: mplayer f1.mkv -o0 --{ -o1 f2.mkv -o2 f3.mkv --} f4.mkv -o3 will have the following options per file set: f1.mkv, f4.mkv: -o0 -o3 f2.mkv, f3.mkv: -o0 -o3 -o1 -o2 The options --{ and --} start and end per-file options. All files inside the { } will be affected by the options equally (similar to how global options and multiple files are handled). When playback of a file starts, the per-file options are set according to the command line. When playback ends, the per-file options are restored to the values when playback started.
2012-07-31 19:33:26 +00:00
playlist_add_file(p->pl, line);
}
mplayer: turn playtree into a list, and change per-file option handling Summary: - There is no playtree anymore. It's reduced to a simple list. - Options are now always global. You can still have per-file options, but these are optional and require special syntax. - The slave command pt_step has been removed, and playlist_next and playlist_prev added. (See etc/input.conf changes.) This is a user visible incompatible change, and will break slave-mode applications. - The pt_clear slave command is renamed to playlist_clear. - Playtree entries could have multiple files. This is not the case anymore, and playlist entries have always exactly one entry. Whenever something adds more than one file (like ASX playlists or dvd:// or dvdnav:// on the command line), all files are added as separate playlist entries. Note that some of the changes are quite deep and violent. Expect regressions. The playlist parsing code in particular is of low quality. I didn't try to improve it, and merely spent to least effort necessary to keep it somehow working. (Especially ASX playlist handling.) The playtree code was complicated and bloated. It was also barely used. Most users don't even know that mplayer manages the playlist as tree, or how to use it. The most obscure features was probably specifying a tree on command line (with '{' and '}' to create/close tree nodes). It filled the player code with complexity and confused users with weird slave commands like pt_up. Replace the playtree with a simple flat playlist. Playlist parsers that actually return trees are changed to append all files to the playlist pre-order. It used to be the responsibility of the playtree code to change per-file config options. Now this is done by the player core, and the playlist code is free of such details. Options are not per-file by default anymore. This was a very obscure and complicated feature that confused even experienced users. Consider the following command line: mplayer file1.mkv file2.mkv --no-audio file3.mkv This will disable the audio for file2.mkv only, because options are per-file by default. To make the option affect all files, you're supposed to put it before the first file. This is bad, because normally you don't need per-file options. They are very rarely needed, and the only reasonable use cases I can imagine are use of the encode backend (mplayer encode branch), or for debugging. The normal use case is made harder, and the feature is perceived as bug. Even worse, correct usage is hard to explain for users. Make all options global by default. The position of an option isn't significant anymore (except for options that compensate each other, consider --shuffle --no-shuffle). One other important change is that no options are reset anymore if a new file is started. If you change settings with slave mode commands, they will not be changed by playing a new file. (Exceptions include settings that are too file specific, like audio/subtitle stream selection.) There is still some need for per-file options. Debugging and encoding are use cases that profit from per-file options. Per-file profiles (as well as per-protocol and per-VO/AO options) need the implementation related mechanisms to backup and restore options when the playback file changes. Simplify the save-slot stuff, which is possible because there is no hierarchical play tree anymore. Now there's a simple backup field. Add a way to specify per-file options on command line. Example: mplayer f1.mkv -o0 --{ -o1 f2.mkv -o2 f3.mkv --} f4.mkv -o3 will have the following options per file set: f1.mkv, f4.mkv: -o0 -o3 f2.mkv, f3.mkv: -o0 -o3 -o1 -o2 The options --{ and --} start and end per-file options. All files inside the { } will be affected by the options equally (similar to how global options and multiple files are handled). When playback of a file starts, the per-file options are set according to the command line. When playback ends, the per-file options are restored to the values when playback started.
2012-07-31 19:33:26 +00:00
return true;
}
mplayer: turn playtree into a list, and change per-file option handling Summary: - There is no playtree anymore. It's reduced to a simple list. - Options are now always global. You can still have per-file options, but these are optional and require special syntax. - The slave command pt_step has been removed, and playlist_next and playlist_prev added. (See etc/input.conf changes.) This is a user visible incompatible change, and will break slave-mode applications. - The pt_clear slave command is renamed to playlist_clear. - Playtree entries could have multiple files. This is not the case anymore, and playlist entries have always exactly one entry. Whenever something adds more than one file (like ASX playlists or dvd:// or dvdnav:// on the command line), all files are added as separate playlist entries. Note that some of the changes are quite deep and violent. Expect regressions. The playlist parsing code in particular is of low quality. I didn't try to improve it, and merely spent to least effort necessary to keep it somehow working. (Especially ASX playlist handling.) The playtree code was complicated and bloated. It was also barely used. Most users don't even know that mplayer manages the playlist as tree, or how to use it. The most obscure features was probably specifying a tree on command line (with '{' and '}' to create/close tree nodes). It filled the player code with complexity and confused users with weird slave commands like pt_up. Replace the playtree with a simple flat playlist. Playlist parsers that actually return trees are changed to append all files to the playlist pre-order. It used to be the responsibility of the playtree code to change per-file config options. Now this is done by the player core, and the playlist code is free of such details. Options are not per-file by default anymore. This was a very obscure and complicated feature that confused even experienced users. Consider the following command line: mplayer file1.mkv file2.mkv --no-audio file3.mkv This will disable the audio for file2.mkv only, because options are per-file by default. To make the option affect all files, you're supposed to put it before the first file. This is bad, because normally you don't need per-file options. They are very rarely needed, and the only reasonable use cases I can imagine are use of the encode backend (mplayer encode branch), or for debugging. The normal use case is made harder, and the feature is perceived as bug. Even worse, correct usage is hard to explain for users. Make all options global by default. The position of an option isn't significant anymore (except for options that compensate each other, consider --shuffle --no-shuffle). One other important change is that no options are reset anymore if a new file is started. If you change settings with slave mode commands, they will not be changed by playing a new file. (Exceptions include settings that are too file specific, like audio/subtitle stream selection.) There is still some need for per-file options. Debugging and encoding are use cases that profit from per-file options. Per-file profiles (as well as per-protocol and per-VO/AO options) need the implementation related mechanisms to backup and restore options when the playback file changes. Simplify the save-slot stuff, which is possible because there is no hierarchical play tree anymore. Now there's a simple backup field. Add a way to specify per-file options on command line. Example: mplayer f1.mkv -o0 --{ -o1 f2.mkv -o2 f3.mkv --} f4.mkv -o3 will have the following options per file set: f1.mkv, f4.mkv: -o0 -o3 f2.mkv, f3.mkv: -o0 -o3 -o1 -o2 The options --{ and --} start and end per-file options. All files inside the { } will be affected by the options equally (similar to how global options and multiple files are handled). When playback of a file starts, the per-file options are set according to the command line. When playback ends, the per-file options are restored to the values when playback started.
2012-07-31 19:33:26 +00:00
static bool parse_smil(play_tree_parser_t* p) {
int entrymode=0;
char* line,source[512],*pos,*s_start,*s_end,*src_line;
int is_rmsmil = 0;
unsigned int npkt, ttlpkt;
mp_msg(MSGT_PLAYTREE,MSGL_V,"Trying smil playlist...\n");
// Check if smil
while((line = play_tree_parser_get_line(p)) != NULL) {
strstrip(line);
if(line[0] == '\0') // Ignore empties
continue;
if (strncasecmp(line,"<?xml",5)==0) // smil in xml
continue;
if (strncasecmp(line,"<!DOCTYPE smil",13)==0) // smil in xml
continue;
if (strncasecmp(line,"<smil",5)==0 || strncasecmp(line,"<?wpl",5)==0 ||
strncasecmp(line,"(smil-document",14)==0)
break; // smil header found
else
return NULL; //line not smil exit
}
if (!line) return NULL;
mp_msg(MSGT_PLAYTREE,MSGL_V,"Detected smil playlist format\n");
play_tree_parser_stop_keeping(p);
if (strncasecmp(line,"(smil-document",14)==0) {
mp_msg(MSGT_PLAYTREE,MSGL_V,"Special smil-over-realrtsp playlist header\n");
is_rmsmil = 1;
if (sscanf(line, "(smil-document (ver 1.0)(npkt %u)(ttlpkt %u", &npkt, &ttlpkt) != 2) {
mp_msg(MSGT_PLAYTREE,MSGL_WARN,"smil-over-realrtsp: header parsing failure, assuming single packet.\n");
npkt = ttlpkt = 1;
}
if (ttlpkt == 0 || npkt > ttlpkt) {
mp_msg(MSGT_PLAYTREE,MSGL_WARN,"smil-over-realrtsp: bad packet counters (npkk = %u, ttlpkt = %u), assuming single packet.\n",
npkt, ttlpkt);
npkt = ttlpkt = 1;
}
}
//Get entries from smil
src_line = line;
line = NULL;
do {
strstrip(src_line);
free(line);
line = NULL;
/* If we're parsing smil over realrtsp and this is not the last packet and
* this is the last line in the packet (terminating with ") ) we must get
* the next line, strip the header, and concatenate it to the current line.
*/
if (is_rmsmil && npkt != ttlpkt && strstr(src_line,"\")")) {
char *payload;
line = strdup(src_line);
if(!(src_line = play_tree_parser_get_line(p))) {
mp_msg(MSGT_PLAYTREE,MSGL_WARN,"smil-over-realrtsp: can't get line from packet %u/%u.\n", npkt, ttlpkt);
break;
}
strstrip(src_line);
// Skip header, packet starts after "
if(!(payload = strchr(src_line,'\"'))) {
mp_msg(MSGT_PLAYTREE,MSGL_WARN,"smil-over-realrtsp: can't find start of packet, using complete line.\n");
payload = src_line;
} else
payload++;
// Skip ") at the end of the last line from the current packet
line[strlen(line)-2] = 0;
line = realloc(line, strlen(line)+strlen(payload)+1);
strcat (line, payload);
npkt++;
} else
line = strdup(src_line);
/* Unescape \" to " for smil-over-rtsp */
if (is_rmsmil && line[0] != '\0') {
int i, j;
for (i = 0; i < strlen(line); i++)
if (line[i] == '\\' && line[i+1] == '"')
for (j = i; line[j]; j++)
line[j] = line[j+1];
}
pos = line;
while (pos) {
if (!entrymode) { // all entries filled so far
while ((pos=strchr(pos, '<'))) {
if (strncasecmp(pos,"<video",6)==0 || strncasecmp(pos,"<audio",6)==0 || strncasecmp(pos,"<media",6)==0) {
entrymode=1;
break; // Got a valid tag, exit '<' search loop
}
pos++;
}
}
if (entrymode) { //Entry found but not yet filled
pos = strstr(pos,"src="); // Is source present on this line
if (pos != NULL) {
entrymode=0;
if (pos[4] != '"' && pos[4] != '\'') {
mp_msg(MSGT_PLAYTREE,MSGL_V,"Unknown delimiter %c in source line %s\n", pos[4], line);
break;
}
s_start=pos+5;
s_end=strchr(s_start,pos[4]);
if (s_end == NULL) {
mp_msg(MSGT_PLAYTREE,MSGL_V,"Error parsing this source line %s\n",line);
break;
}
if (s_end-s_start> 511) {
mp_msg(MSGT_PLAYTREE,MSGL_V,"Cannot store such a large source %s\n",line);
break;
}
strncpy(source,s_start,s_end-s_start);
source[(s_end-s_start)]='\0'; // Null terminate
mplayer: turn playtree into a list, and change per-file option handling Summary: - There is no playtree anymore. It's reduced to a simple list. - Options are now always global. You can still have per-file options, but these are optional and require special syntax. - The slave command pt_step has been removed, and playlist_next and playlist_prev added. (See etc/input.conf changes.) This is a user visible incompatible change, and will break slave-mode applications. - The pt_clear slave command is renamed to playlist_clear. - Playtree entries could have multiple files. This is not the case anymore, and playlist entries have always exactly one entry. Whenever something adds more than one file (like ASX playlists or dvd:// or dvdnav:// on the command line), all files are added as separate playlist entries. Note that some of the changes are quite deep and violent. Expect regressions. The playlist parsing code in particular is of low quality. I didn't try to improve it, and merely spent to least effort necessary to keep it somehow working. (Especially ASX playlist handling.) The playtree code was complicated and bloated. It was also barely used. Most users don't even know that mplayer manages the playlist as tree, or how to use it. The most obscure features was probably specifying a tree on command line (with '{' and '}' to create/close tree nodes). It filled the player code with complexity and confused users with weird slave commands like pt_up. Replace the playtree with a simple flat playlist. Playlist parsers that actually return trees are changed to append all files to the playlist pre-order. It used to be the responsibility of the playtree code to change per-file config options. Now this is done by the player core, and the playlist code is free of such details. Options are not per-file by default anymore. This was a very obscure and complicated feature that confused even experienced users. Consider the following command line: mplayer file1.mkv file2.mkv --no-audio file3.mkv This will disable the audio for file2.mkv only, because options are per-file by default. To make the option affect all files, you're supposed to put it before the first file. This is bad, because normally you don't need per-file options. They are very rarely needed, and the only reasonable use cases I can imagine are use of the encode backend (mplayer encode branch), or for debugging. The normal use case is made harder, and the feature is perceived as bug. Even worse, correct usage is hard to explain for users. Make all options global by default. The position of an option isn't significant anymore (except for options that compensate each other, consider --shuffle --no-shuffle). One other important change is that no options are reset anymore if a new file is started. If you change settings with slave mode commands, they will not be changed by playing a new file. (Exceptions include settings that are too file specific, like audio/subtitle stream selection.) There is still some need for per-file options. Debugging and encoding are use cases that profit from per-file options. Per-file profiles (as well as per-protocol and per-VO/AO options) need the implementation related mechanisms to backup and restore options when the playback file changes. Simplify the save-slot stuff, which is possible because there is no hierarchical play tree anymore. Now there's a simple backup field. Add a way to specify per-file options on command line. Example: mplayer f1.mkv -o0 --{ -o1 f2.mkv -o2 f3.mkv --} f4.mkv -o3 will have the following options per file set: f1.mkv, f4.mkv: -o0 -o3 f2.mkv, f3.mkv: -o0 -o3 -o1 -o2 The options --{ and --} start and end per-file options. All files inside the { } will be affected by the options equally (similar to how global options and multiple files are handled). When playback of a file starts, the per-file options are set according to the command line. When playback ends, the per-file options are restored to the values when playback started.
2012-07-31 19:33:26 +00:00
playlist_add_file(p->pl, source);
pos = s_end;
}
}
}
} while((src_line = play_tree_parser_get_line(p)) != NULL);
free(line);
mplayer: turn playtree into a list, and change per-file option handling Summary: - There is no playtree anymore. It's reduced to a simple list. - Options are now always global. You can still have per-file options, but these are optional and require special syntax. - The slave command pt_step has been removed, and playlist_next and playlist_prev added. (See etc/input.conf changes.) This is a user visible incompatible change, and will break slave-mode applications. - The pt_clear slave command is renamed to playlist_clear. - Playtree entries could have multiple files. This is not the case anymore, and playlist entries have always exactly one entry. Whenever something adds more than one file (like ASX playlists or dvd:// or dvdnav:// on the command line), all files are added as separate playlist entries. Note that some of the changes are quite deep and violent. Expect regressions. The playlist parsing code in particular is of low quality. I didn't try to improve it, and merely spent to least effort necessary to keep it somehow working. (Especially ASX playlist handling.) The playtree code was complicated and bloated. It was also barely used. Most users don't even know that mplayer manages the playlist as tree, or how to use it. The most obscure features was probably specifying a tree on command line (with '{' and '}' to create/close tree nodes). It filled the player code with complexity and confused users with weird slave commands like pt_up. Replace the playtree with a simple flat playlist. Playlist parsers that actually return trees are changed to append all files to the playlist pre-order. It used to be the responsibility of the playtree code to change per-file config options. Now this is done by the player core, and the playlist code is free of such details. Options are not per-file by default anymore. This was a very obscure and complicated feature that confused even experienced users. Consider the following command line: mplayer file1.mkv file2.mkv --no-audio file3.mkv This will disable the audio for file2.mkv only, because options are per-file by default. To make the option affect all files, you're supposed to put it before the first file. This is bad, because normally you don't need per-file options. They are very rarely needed, and the only reasonable use cases I can imagine are use of the encode backend (mplayer encode branch), or for debugging. The normal use case is made harder, and the feature is perceived as bug. Even worse, correct usage is hard to explain for users. Make all options global by default. The position of an option isn't significant anymore (except for options that compensate each other, consider --shuffle --no-shuffle). One other important change is that no options are reset anymore if a new file is started. If you change settings with slave mode commands, they will not be changed by playing a new file. (Exceptions include settings that are too file specific, like audio/subtitle stream selection.) There is still some need for per-file options. Debugging and encoding are use cases that profit from per-file options. Per-file profiles (as well as per-protocol and per-VO/AO options) need the implementation related mechanisms to backup and restore options when the playback file changes. Simplify the save-slot stuff, which is possible because there is no hierarchical play tree anymore. Now there's a simple backup field. Add a way to specify per-file options on command line. Example: mplayer f1.mkv -o0 --{ -o1 f2.mkv -o2 f3.mkv --} f4.mkv -o3 will have the following options per file set: f1.mkv, f4.mkv: -o0 -o3 f2.mkv, f3.mkv: -o0 -o3 -o1 -o2 The options --{ and --} start and end per-file options. All files inside the { } will be affected by the options equally (similar to how global options and multiple files are handled). When playback of a file starts, the per-file options are set according to the command line. When playback ends, the per-file options are restored to the values when playback started.
2012-07-31 19:33:26 +00:00
return true;
}
mplayer: turn playtree into a list, and change per-file option handling Summary: - There is no playtree anymore. It's reduced to a simple list. - Options are now always global. You can still have per-file options, but these are optional and require special syntax. - The slave command pt_step has been removed, and playlist_next and playlist_prev added. (See etc/input.conf changes.) This is a user visible incompatible change, and will break slave-mode applications. - The pt_clear slave command is renamed to playlist_clear. - Playtree entries could have multiple files. This is not the case anymore, and playlist entries have always exactly one entry. Whenever something adds more than one file (like ASX playlists or dvd:// or dvdnav:// on the command line), all files are added as separate playlist entries. Note that some of the changes are quite deep and violent. Expect regressions. The playlist parsing code in particular is of low quality. I didn't try to improve it, and merely spent to least effort necessary to keep it somehow working. (Especially ASX playlist handling.) The playtree code was complicated and bloated. It was also barely used. Most users don't even know that mplayer manages the playlist as tree, or how to use it. The most obscure features was probably specifying a tree on command line (with '{' and '}' to create/close tree nodes). It filled the player code with complexity and confused users with weird slave commands like pt_up. Replace the playtree with a simple flat playlist. Playlist parsers that actually return trees are changed to append all files to the playlist pre-order. It used to be the responsibility of the playtree code to change per-file config options. Now this is done by the player core, and the playlist code is free of such details. Options are not per-file by default anymore. This was a very obscure and complicated feature that confused even experienced users. Consider the following command line: mplayer file1.mkv file2.mkv --no-audio file3.mkv This will disable the audio for file2.mkv only, because options are per-file by default. To make the option affect all files, you're supposed to put it before the first file. This is bad, because normally you don't need per-file options. They are very rarely needed, and the only reasonable use cases I can imagine are use of the encode backend (mplayer encode branch), or for debugging. The normal use case is made harder, and the feature is perceived as bug. Even worse, correct usage is hard to explain for users. Make all options global by default. The position of an option isn't significant anymore (except for options that compensate each other, consider --shuffle --no-shuffle). One other important change is that no options are reset anymore if a new file is started. If you change settings with slave mode commands, they will not be changed by playing a new file. (Exceptions include settings that are too file specific, like audio/subtitle stream selection.) There is still some need for per-file options. Debugging and encoding are use cases that profit from per-file options. Per-file profiles (as well as per-protocol and per-VO/AO options) need the implementation related mechanisms to backup and restore options when the playback file changes. Simplify the save-slot stuff, which is possible because there is no hierarchical play tree anymore. Now there's a simple backup field. Add a way to specify per-file options on command line. Example: mplayer f1.mkv -o0 --{ -o1 f2.mkv -o2 f3.mkv --} f4.mkv -o3 will have the following options per file set: f1.mkv, f4.mkv: -o0 -o3 f2.mkv, f3.mkv: -o0 -o3 -o1 -o2 The options --{ and --} start and end per-file options. All files inside the { } will be affected by the options equally (similar to how global options and multiple files are handled). When playback of a file starts, the per-file options are set according to the command line. When playback ends, the per-file options are restored to the values when playback started.
2012-07-31 19:33:26 +00:00
static bool parse_textplain(play_tree_parser_t* p) {
char* line;
mp_msg(MSGT_PLAYTREE,MSGL_V,"Trying plaintext playlist...\n");
play_tree_parser_stop_keeping(p);
while((line = play_tree_parser_get_line(p)) != NULL) {
strstrip(line);
if(line[0] == '\0' || line[0] == '#' || (line[0] == '/' && line[1] == '/'))
continue;
mplayer: turn playtree into a list, and change per-file option handling Summary: - There is no playtree anymore. It's reduced to a simple list. - Options are now always global. You can still have per-file options, but these are optional and require special syntax. - The slave command pt_step has been removed, and playlist_next and playlist_prev added. (See etc/input.conf changes.) This is a user visible incompatible change, and will break slave-mode applications. - The pt_clear slave command is renamed to playlist_clear. - Playtree entries could have multiple files. This is not the case anymore, and playlist entries have always exactly one entry. Whenever something adds more than one file (like ASX playlists or dvd:// or dvdnav:// on the command line), all files are added as separate playlist entries. Note that some of the changes are quite deep and violent. Expect regressions. The playlist parsing code in particular is of low quality. I didn't try to improve it, and merely spent to least effort necessary to keep it somehow working. (Especially ASX playlist handling.) The playtree code was complicated and bloated. It was also barely used. Most users don't even know that mplayer manages the playlist as tree, or how to use it. The most obscure features was probably specifying a tree on command line (with '{' and '}' to create/close tree nodes). It filled the player code with complexity and confused users with weird slave commands like pt_up. Replace the playtree with a simple flat playlist. Playlist parsers that actually return trees are changed to append all files to the playlist pre-order. It used to be the responsibility of the playtree code to change per-file config options. Now this is done by the player core, and the playlist code is free of such details. Options are not per-file by default anymore. This was a very obscure and complicated feature that confused even experienced users. Consider the following command line: mplayer file1.mkv file2.mkv --no-audio file3.mkv This will disable the audio for file2.mkv only, because options are per-file by default. To make the option affect all files, you're supposed to put it before the first file. This is bad, because normally you don't need per-file options. They are very rarely needed, and the only reasonable use cases I can imagine are use of the encode backend (mplayer encode branch), or for debugging. The normal use case is made harder, and the feature is perceived as bug. Even worse, correct usage is hard to explain for users. Make all options global by default. The position of an option isn't significant anymore (except for options that compensate each other, consider --shuffle --no-shuffle). One other important change is that no options are reset anymore if a new file is started. If you change settings with slave mode commands, they will not be changed by playing a new file. (Exceptions include settings that are too file specific, like audio/subtitle stream selection.) There is still some need for per-file options. Debugging and encoding are use cases that profit from per-file options. Per-file profiles (as well as per-protocol and per-VO/AO options) need the implementation related mechanisms to backup and restore options when the playback file changes. Simplify the save-slot stuff, which is possible because there is no hierarchical play tree anymore. Now there's a simple backup field. Add a way to specify per-file options on command line. Example: mplayer f1.mkv -o0 --{ -o1 f2.mkv -o2 f3.mkv --} f4.mkv -o3 will have the following options per file set: f1.mkv, f4.mkv: -o0 -o3 f2.mkv, f3.mkv: -o0 -o3 -o1 -o2 The options --{ and --} start and end per-file options. All files inside the { } will be affected by the options equally (similar to how global options and multiple files are handled). When playback of a file starts, the per-file options are set according to the command line. When playback ends, the per-file options are restored to the values when playback started.
2012-07-31 19:33:26 +00:00
playlist_add_file(p->pl,line);
}
mplayer: turn playtree into a list, and change per-file option handling Summary: - There is no playtree anymore. It's reduced to a simple list. - Options are now always global. You can still have per-file options, but these are optional and require special syntax. - The slave command pt_step has been removed, and playlist_next and playlist_prev added. (See etc/input.conf changes.) This is a user visible incompatible change, and will break slave-mode applications. - The pt_clear slave command is renamed to playlist_clear. - Playtree entries could have multiple files. This is not the case anymore, and playlist entries have always exactly one entry. Whenever something adds more than one file (like ASX playlists or dvd:// or dvdnav:// on the command line), all files are added as separate playlist entries. Note that some of the changes are quite deep and violent. Expect regressions. The playlist parsing code in particular is of low quality. I didn't try to improve it, and merely spent to least effort necessary to keep it somehow working. (Especially ASX playlist handling.) The playtree code was complicated and bloated. It was also barely used. Most users don't even know that mplayer manages the playlist as tree, or how to use it. The most obscure features was probably specifying a tree on command line (with '{' and '}' to create/close tree nodes). It filled the player code with complexity and confused users with weird slave commands like pt_up. Replace the playtree with a simple flat playlist. Playlist parsers that actually return trees are changed to append all files to the playlist pre-order. It used to be the responsibility of the playtree code to change per-file config options. Now this is done by the player core, and the playlist code is free of such details. Options are not per-file by default anymore. This was a very obscure and complicated feature that confused even experienced users. Consider the following command line: mplayer file1.mkv file2.mkv --no-audio file3.mkv This will disable the audio for file2.mkv only, because options are per-file by default. To make the option affect all files, you're supposed to put it before the first file. This is bad, because normally you don't need per-file options. They are very rarely needed, and the only reasonable use cases I can imagine are use of the encode backend (mplayer encode branch), or for debugging. The normal use case is made harder, and the feature is perceived as bug. Even worse, correct usage is hard to explain for users. Make all options global by default. The position of an option isn't significant anymore (except for options that compensate each other, consider --shuffle --no-shuffle). One other important change is that no options are reset anymore if a new file is started. If you change settings with slave mode commands, they will not be changed by playing a new file. (Exceptions include settings that are too file specific, like audio/subtitle stream selection.) There is still some need for per-file options. Debugging and encoding are use cases that profit from per-file options. Per-file profiles (as well as per-protocol and per-VO/AO options) need the implementation related mechanisms to backup and restore options when the playback file changes. Simplify the save-slot stuff, which is possible because there is no hierarchical play tree anymore. Now there's a simple backup field. Add a way to specify per-file options on command line. Example: mplayer f1.mkv -o0 --{ -o1 f2.mkv -o2 f3.mkv --} f4.mkv -o3 will have the following options per file set: f1.mkv, f4.mkv: -o0 -o3 f2.mkv, f3.mkv: -o0 -o3 -o1 -o2 The options --{ and --} start and end per-file options. All files inside the { } will be affected by the options equally (similar to how global options and multiple files are handled). When playback of a file starts, the per-file options are set according to the command line. When playback ends, the per-file options are restored to the values when playback started.
2012-07-31 19:33:26 +00:00
return true;
}
/**
* \brief decode the base64 used in nsc files
* \param in input string, 0-terminated
* \param buf output buffer, must point to memory suitable for realloc,
* will be NULL on failure.
* \return decoded length in bytes
*/
static int decode_nsc_base64(char *in, char **buf) {
int i, j, n;
if (in[0] != '0' || in[1] != '2')
goto err_out;
in += 2; // skip prefix
if (strlen(in) < 16) // error out if nothing to decode
goto err_out;
in += 12; // skip encoded string length
n = strlen(in) / 4;
*buf = realloc(*buf, n * 3);
for (i = 0; i < n; i++) {
uint8_t c[4];
for (j = 0; j < 4; j++) {
c[j] = in[4 * i + j];
if (c[j] >= '0' && c[j] <= '9') c[j] += 0 - '0';
else if (c[j] >= 'A' && c[j] <= 'Z') c[j] += 10 - 'A';
else if (c[j] >= 'a' && c[j] <= 'z') c[j] += 36 - 'a';
else if (c[j] == '{') c[j] = 62;
else if (c[j] == '}') c[j] = 63;
else {
mp_msg(MSGT_PLAYTREE, MSGL_ERR, "Invalid character %c (0x%02"PRIx8")\n", c[j], c[j]);
goto err_out;
}
}
(*buf)[3 * i] = (c[0] << 2) | (c[1] >> 4);
(*buf)[3 * i + 1] = (c[1] << 4) | (c[2] >> 2);
(*buf)[3 * i + 2] = (c[2] << 6) | c[3];
}
return 3 * n;
err_out:
free(*buf);
*buf = NULL;
return 0;
}
/**
* \brief "converts" utf16 to ascii by just discarding every second byte
* \param buf buffer to convert
* \param len lenght of buffer, must be > 0
*/
static void utf16_to_ascii(char *buf, int len) {
int i;
if (len <= 0) return;
for (i = 0; i < len / 2; i++)
buf[i] = buf[i * 2];
buf[i] = 0; // just in case
}
mplayer: turn playtree into a list, and change per-file option handling Summary: - There is no playtree anymore. It's reduced to a simple list. - Options are now always global. You can still have per-file options, but these are optional and require special syntax. - The slave command pt_step has been removed, and playlist_next and playlist_prev added. (See etc/input.conf changes.) This is a user visible incompatible change, and will break slave-mode applications. - The pt_clear slave command is renamed to playlist_clear. - Playtree entries could have multiple files. This is not the case anymore, and playlist entries have always exactly one entry. Whenever something adds more than one file (like ASX playlists or dvd:// or dvdnav:// on the command line), all files are added as separate playlist entries. Note that some of the changes are quite deep and violent. Expect regressions. The playlist parsing code in particular is of low quality. I didn't try to improve it, and merely spent to least effort necessary to keep it somehow working. (Especially ASX playlist handling.) The playtree code was complicated and bloated. It was also barely used. Most users don't even know that mplayer manages the playlist as tree, or how to use it. The most obscure features was probably specifying a tree on command line (with '{' and '}' to create/close tree nodes). It filled the player code with complexity and confused users with weird slave commands like pt_up. Replace the playtree with a simple flat playlist. Playlist parsers that actually return trees are changed to append all files to the playlist pre-order. It used to be the responsibility of the playtree code to change per-file config options. Now this is done by the player core, and the playlist code is free of such details. Options are not per-file by default anymore. This was a very obscure and complicated feature that confused even experienced users. Consider the following command line: mplayer file1.mkv file2.mkv --no-audio file3.mkv This will disable the audio for file2.mkv only, because options are per-file by default. To make the option affect all files, you're supposed to put it before the first file. This is bad, because normally you don't need per-file options. They are very rarely needed, and the only reasonable use cases I can imagine are use of the encode backend (mplayer encode branch), or for debugging. The normal use case is made harder, and the feature is perceived as bug. Even worse, correct usage is hard to explain for users. Make all options global by default. The position of an option isn't significant anymore (except for options that compensate each other, consider --shuffle --no-shuffle). One other important change is that no options are reset anymore if a new file is started. If you change settings with slave mode commands, they will not be changed by playing a new file. (Exceptions include settings that are too file specific, like audio/subtitle stream selection.) There is still some need for per-file options. Debugging and encoding are use cases that profit from per-file options. Per-file profiles (as well as per-protocol and per-VO/AO options) need the implementation related mechanisms to backup and restore options when the playback file changes. Simplify the save-slot stuff, which is possible because there is no hierarchical play tree anymore. Now there's a simple backup field. Add a way to specify per-file options on command line. Example: mplayer f1.mkv -o0 --{ -o1 f2.mkv -o2 f3.mkv --} f4.mkv -o3 will have the following options per file set: f1.mkv, f4.mkv: -o0 -o3 f2.mkv, f3.mkv: -o0 -o3 -o1 -o2 The options --{ and --} start and end per-file options. All files inside the { } will be affected by the options equally (similar to how global options and multiple files are handled). When playback of a file starts, the per-file options are set according to the command line. When playback ends, the per-file options are restored to the values when playback started.
2012-07-31 19:33:26 +00:00
static bool parse_nsc(play_tree_parser_t* p) {
char *line, *addr = NULL, *url, *unicast_url = NULL;
int port = 0;
mp_msg(MSGT_PLAYTREE,MSGL_V,"Trying nsc playlist...\n");
while((line = play_tree_parser_get_line(p)) != NULL) {
strstrip(line);
if(!line[0]) // Ignore empties
continue;
if (strncasecmp(line,"[Address]", 9) == 0)
break; // nsc header found
else
mplayer: turn playtree into a list, and change per-file option handling Summary: - There is no playtree anymore. It's reduced to a simple list. - Options are now always global. You can still have per-file options, but these are optional and require special syntax. - The slave command pt_step has been removed, and playlist_next and playlist_prev added. (See etc/input.conf changes.) This is a user visible incompatible change, and will break slave-mode applications. - The pt_clear slave command is renamed to playlist_clear. - Playtree entries could have multiple files. This is not the case anymore, and playlist entries have always exactly one entry. Whenever something adds more than one file (like ASX playlists or dvd:// or dvdnav:// on the command line), all files are added as separate playlist entries. Note that some of the changes are quite deep and violent. Expect regressions. The playlist parsing code in particular is of low quality. I didn't try to improve it, and merely spent to least effort necessary to keep it somehow working. (Especially ASX playlist handling.) The playtree code was complicated and bloated. It was also barely used. Most users don't even know that mplayer manages the playlist as tree, or how to use it. The most obscure features was probably specifying a tree on command line (with '{' and '}' to create/close tree nodes). It filled the player code with complexity and confused users with weird slave commands like pt_up. Replace the playtree with a simple flat playlist. Playlist parsers that actually return trees are changed to append all files to the playlist pre-order. It used to be the responsibility of the playtree code to change per-file config options. Now this is done by the player core, and the playlist code is free of such details. Options are not per-file by default anymore. This was a very obscure and complicated feature that confused even experienced users. Consider the following command line: mplayer file1.mkv file2.mkv --no-audio file3.mkv This will disable the audio for file2.mkv only, because options are per-file by default. To make the option affect all files, you're supposed to put it before the first file. This is bad, because normally you don't need per-file options. They are very rarely needed, and the only reasonable use cases I can imagine are use of the encode backend (mplayer encode branch), or for debugging. The normal use case is made harder, and the feature is perceived as bug. Even worse, correct usage is hard to explain for users. Make all options global by default. The position of an option isn't significant anymore (except for options that compensate each other, consider --shuffle --no-shuffle). One other important change is that no options are reset anymore if a new file is started. If you change settings with slave mode commands, they will not be changed by playing a new file. (Exceptions include settings that are too file specific, like audio/subtitle stream selection.) There is still some need for per-file options. Debugging and encoding are use cases that profit from per-file options. Per-file profiles (as well as per-protocol and per-VO/AO options) need the implementation related mechanisms to backup and restore options when the playback file changes. Simplify the save-slot stuff, which is possible because there is no hierarchical play tree anymore. Now there's a simple backup field. Add a way to specify per-file options on command line. Example: mplayer f1.mkv -o0 --{ -o1 f2.mkv -o2 f3.mkv --} f4.mkv -o3 will have the following options per file set: f1.mkv, f4.mkv: -o0 -o3 f2.mkv, f3.mkv: -o0 -o3 -o1 -o2 The options --{ and --} start and end per-file options. All files inside the { } will be affected by the options equally (similar to how global options and multiple files are handled). When playback of a file starts, the per-file options are set according to the command line. When playback ends, the per-file options are restored to the values when playback started.
2012-07-31 19:33:26 +00:00
return false;
}
mp_msg(MSGT_PLAYTREE,MSGL_V,"Detected nsc playlist format\n");
play_tree_parser_stop_keeping(p);
while ((line = play_tree_parser_get_line(p)) != NULL) {
strstrip(line);
if (!line[0])
continue;
if (strncasecmp(line, "Unicast URL=", 12) == 0) {
int len = decode_nsc_base64(&line[12], &unicast_url);
if (len <= 0)
mp_msg(MSGT_PLAYTREE, MSGL_WARN, "[nsc] Unsupported Unicast URL encoding\n");
else
utf16_to_ascii(unicast_url, len);
} else if (strncasecmp(line, "IP Address=", 11) == 0) {
int len = decode_nsc_base64(&line[11], &addr);
if (len <= 0)
mp_msg(MSGT_PLAYTREE, MSGL_WARN, "[nsc] Unsupported IP Address encoding\n");
else
utf16_to_ascii(addr, len);
} else if (strncasecmp(line, "IP Port=", 8) == 0) {
port = strtol(&line[8], NULL, 0);
}
}
mplayer: turn playtree into a list, and change per-file option handling Summary: - There is no playtree anymore. It's reduced to a simple list. - Options are now always global. You can still have per-file options, but these are optional and require special syntax. - The slave command pt_step has been removed, and playlist_next and playlist_prev added. (See etc/input.conf changes.) This is a user visible incompatible change, and will break slave-mode applications. - The pt_clear slave command is renamed to playlist_clear. - Playtree entries could have multiple files. This is not the case anymore, and playlist entries have always exactly one entry. Whenever something adds more than one file (like ASX playlists or dvd:// or dvdnav:// on the command line), all files are added as separate playlist entries. Note that some of the changes are quite deep and violent. Expect regressions. The playlist parsing code in particular is of low quality. I didn't try to improve it, and merely spent to least effort necessary to keep it somehow working. (Especially ASX playlist handling.) The playtree code was complicated and bloated. It was also barely used. Most users don't even know that mplayer manages the playlist as tree, or how to use it. The most obscure features was probably specifying a tree on command line (with '{' and '}' to create/close tree nodes). It filled the player code with complexity and confused users with weird slave commands like pt_up. Replace the playtree with a simple flat playlist. Playlist parsers that actually return trees are changed to append all files to the playlist pre-order. It used to be the responsibility of the playtree code to change per-file config options. Now this is done by the player core, and the playlist code is free of such details. Options are not per-file by default anymore. This was a very obscure and complicated feature that confused even experienced users. Consider the following command line: mplayer file1.mkv file2.mkv --no-audio file3.mkv This will disable the audio for file2.mkv only, because options are per-file by default. To make the option affect all files, you're supposed to put it before the first file. This is bad, because normally you don't need per-file options. They are very rarely needed, and the only reasonable use cases I can imagine are use of the encode backend (mplayer encode branch), or for debugging. The normal use case is made harder, and the feature is perceived as bug. Even worse, correct usage is hard to explain for users. Make all options global by default. The position of an option isn't significant anymore (except for options that compensate each other, consider --shuffle --no-shuffle). One other important change is that no options are reset anymore if a new file is started. If you change settings with slave mode commands, they will not be changed by playing a new file. (Exceptions include settings that are too file specific, like audio/subtitle stream selection.) There is still some need for per-file options. Debugging and encoding are use cases that profit from per-file options. Per-file profiles (as well as per-protocol and per-VO/AO options) need the implementation related mechanisms to backup and restore options when the playback file changes. Simplify the save-slot stuff, which is possible because there is no hierarchical play tree anymore. Now there's a simple backup field. Add a way to specify per-file options on command line. Example: mplayer f1.mkv -o0 --{ -o1 f2.mkv -o2 f3.mkv --} f4.mkv -o3 will have the following options per file set: f1.mkv, f4.mkv: -o0 -o3 f2.mkv, f3.mkv: -o0 -o3 -o1 -o2 The options --{ and --} start and end per-file options. All files inside the { } will be affected by the options equally (similar to how global options and multiple files are handled). When playback of a file starts, the per-file options are set according to the command line. When playback ends, the per-file options are restored to the values when playback started.
2012-07-31 19:33:26 +00:00
bool success = false;
if (unicast_url)
url = strdup(unicast_url);
else if (addr && port) {
url = malloc(strlen(addr) + 7 + 20 + 1);
sprintf(url, "http://%s:%i", addr, port);
} else
mplayer: turn playtree into a list, and change per-file option handling Summary: - There is no playtree anymore. It's reduced to a simple list. - Options are now always global. You can still have per-file options, but these are optional and require special syntax. - The slave command pt_step has been removed, and playlist_next and playlist_prev added. (See etc/input.conf changes.) This is a user visible incompatible change, and will break slave-mode applications. - The pt_clear slave command is renamed to playlist_clear. - Playtree entries could have multiple files. This is not the case anymore, and playlist entries have always exactly one entry. Whenever something adds more than one file (like ASX playlists or dvd:// or dvdnav:// on the command line), all files are added as separate playlist entries. Note that some of the changes are quite deep and violent. Expect regressions. The playlist parsing code in particular is of low quality. I didn't try to improve it, and merely spent to least effort necessary to keep it somehow working. (Especially ASX playlist handling.) The playtree code was complicated and bloated. It was also barely used. Most users don't even know that mplayer manages the playlist as tree, or how to use it. The most obscure features was probably specifying a tree on command line (with '{' and '}' to create/close tree nodes). It filled the player code with complexity and confused users with weird slave commands like pt_up. Replace the playtree with a simple flat playlist. Playlist parsers that actually return trees are changed to append all files to the playlist pre-order. It used to be the responsibility of the playtree code to change per-file config options. Now this is done by the player core, and the playlist code is free of such details. Options are not per-file by default anymore. This was a very obscure and complicated feature that confused even experienced users. Consider the following command line: mplayer file1.mkv file2.mkv --no-audio file3.mkv This will disable the audio for file2.mkv only, because options are per-file by default. To make the option affect all files, you're supposed to put it before the first file. This is bad, because normally you don't need per-file options. They are very rarely needed, and the only reasonable use cases I can imagine are use of the encode backend (mplayer encode branch), or for debugging. The normal use case is made harder, and the feature is perceived as bug. Even worse, correct usage is hard to explain for users. Make all options global by default. The position of an option isn't significant anymore (except for options that compensate each other, consider --shuffle --no-shuffle). One other important change is that no options are reset anymore if a new file is started. If you change settings with slave mode commands, they will not be changed by playing a new file. (Exceptions include settings that are too file specific, like audio/subtitle stream selection.) There is still some need for per-file options. Debugging and encoding are use cases that profit from per-file options. Per-file profiles (as well as per-protocol and per-VO/AO options) need the implementation related mechanisms to backup and restore options when the playback file changes. Simplify the save-slot stuff, which is possible because there is no hierarchical play tree anymore. Now there's a simple backup field. Add a way to specify per-file options on command line. Example: mplayer f1.mkv -o0 --{ -o1 f2.mkv -o2 f3.mkv --} f4.mkv -o3 will have the following options per file set: f1.mkv, f4.mkv: -o0 -o3 f2.mkv, f3.mkv: -o0 -o3 -o1 -o2 The options --{ and --} start and end per-file options. All files inside the { } will be affected by the options equally (similar to how global options and multiple files are handled). When playback of a file starts, the per-file options are set according to the command line. When playback ends, the per-file options are restored to the values when playback started.
2012-07-31 19:33:26 +00:00
goto err_out;
mplayer: turn playtree into a list, and change per-file option handling Summary: - There is no playtree anymore. It's reduced to a simple list. - Options are now always global. You can still have per-file options, but these are optional and require special syntax. - The slave command pt_step has been removed, and playlist_next and playlist_prev added. (See etc/input.conf changes.) This is a user visible incompatible change, and will break slave-mode applications. - The pt_clear slave command is renamed to playlist_clear. - Playtree entries could have multiple files. This is not the case anymore, and playlist entries have always exactly one entry. Whenever something adds more than one file (like ASX playlists or dvd:// or dvdnav:// on the command line), all files are added as separate playlist entries. Note that some of the changes are quite deep and violent. Expect regressions. The playlist parsing code in particular is of low quality. I didn't try to improve it, and merely spent to least effort necessary to keep it somehow working. (Especially ASX playlist handling.) The playtree code was complicated and bloated. It was also barely used. Most users don't even know that mplayer manages the playlist as tree, or how to use it. The most obscure features was probably specifying a tree on command line (with '{' and '}' to create/close tree nodes). It filled the player code with complexity and confused users with weird slave commands like pt_up. Replace the playtree with a simple flat playlist. Playlist parsers that actually return trees are changed to append all files to the playlist pre-order. It used to be the responsibility of the playtree code to change per-file config options. Now this is done by the player core, and the playlist code is free of such details. Options are not per-file by default anymore. This was a very obscure and complicated feature that confused even experienced users. Consider the following command line: mplayer file1.mkv file2.mkv --no-audio file3.mkv This will disable the audio for file2.mkv only, because options are per-file by default. To make the option affect all files, you're supposed to put it before the first file. This is bad, because normally you don't need per-file options. They are very rarely needed, and the only reasonable use cases I can imagine are use of the encode backend (mplayer encode branch), or for debugging. The normal use case is made harder, and the feature is perceived as bug. Even worse, correct usage is hard to explain for users. Make all options global by default. The position of an option isn't significant anymore (except for options that compensate each other, consider --shuffle --no-shuffle). One other important change is that no options are reset anymore if a new file is started. If you change settings with slave mode commands, they will not be changed by playing a new file. (Exceptions include settings that are too file specific, like audio/subtitle stream selection.) There is still some need for per-file options. Debugging and encoding are use cases that profit from per-file options. Per-file profiles (as well as per-protocol and per-VO/AO options) need the implementation related mechanisms to backup and restore options when the playback file changes. Simplify the save-slot stuff, which is possible because there is no hierarchical play tree anymore. Now there's a simple backup field. Add a way to specify per-file options on command line. Example: mplayer f1.mkv -o0 --{ -o1 f2.mkv -o2 f3.mkv --} f4.mkv -o3 will have the following options per file set: f1.mkv, f4.mkv: -o0 -o3 f2.mkv, f3.mkv: -o0 -o3 -o1 -o2 The options --{ and --} start and end per-file options. All files inside the { } will be affected by the options equally (similar to how global options and multiple files are handled). When playback of a file starts, the per-file options are set according to the command line. When playback ends, the per-file options are restored to the values when playback started.
2012-07-31 19:33:26 +00:00
playlist_add_file(p->pl, url);
free(url);
mplayer: turn playtree into a list, and change per-file option handling Summary: - There is no playtree anymore. It's reduced to a simple list. - Options are now always global. You can still have per-file options, but these are optional and require special syntax. - The slave command pt_step has been removed, and playlist_next and playlist_prev added. (See etc/input.conf changes.) This is a user visible incompatible change, and will break slave-mode applications. - The pt_clear slave command is renamed to playlist_clear. - Playtree entries could have multiple files. This is not the case anymore, and playlist entries have always exactly one entry. Whenever something adds more than one file (like ASX playlists or dvd:// or dvdnav:// on the command line), all files are added as separate playlist entries. Note that some of the changes are quite deep and violent. Expect regressions. The playlist parsing code in particular is of low quality. I didn't try to improve it, and merely spent to least effort necessary to keep it somehow working. (Especially ASX playlist handling.) The playtree code was complicated and bloated. It was also barely used. Most users don't even know that mplayer manages the playlist as tree, or how to use it. The most obscure features was probably specifying a tree on command line (with '{' and '}' to create/close tree nodes). It filled the player code with complexity and confused users with weird slave commands like pt_up. Replace the playtree with a simple flat playlist. Playlist parsers that actually return trees are changed to append all files to the playlist pre-order. It used to be the responsibility of the playtree code to change per-file config options. Now this is done by the player core, and the playlist code is free of such details. Options are not per-file by default anymore. This was a very obscure and complicated feature that confused even experienced users. Consider the following command line: mplayer file1.mkv file2.mkv --no-audio file3.mkv This will disable the audio for file2.mkv only, because options are per-file by default. To make the option affect all files, you're supposed to put it before the first file. This is bad, because normally you don't need per-file options. They are very rarely needed, and the only reasonable use cases I can imagine are use of the encode backend (mplayer encode branch), or for debugging. The normal use case is made harder, and the feature is perceived as bug. Even worse, correct usage is hard to explain for users. Make all options global by default. The position of an option isn't significant anymore (except for options that compensate each other, consider --shuffle --no-shuffle). One other important change is that no options are reset anymore if a new file is started. If you change settings with slave mode commands, they will not be changed by playing a new file. (Exceptions include settings that are too file specific, like audio/subtitle stream selection.) There is still some need for per-file options. Debugging and encoding are use cases that profit from per-file options. Per-file profiles (as well as per-protocol and per-VO/AO options) need the implementation related mechanisms to backup and restore options when the playback file changes. Simplify the save-slot stuff, which is possible because there is no hierarchical play tree anymore. Now there's a simple backup field. Add a way to specify per-file options on command line. Example: mplayer f1.mkv -o0 --{ -o1 f2.mkv -o2 f3.mkv --} f4.mkv -o3 will have the following options per file set: f1.mkv, f4.mkv: -o0 -o3 f2.mkv, f3.mkv: -o0 -o3 -o1 -o2 The options --{ and --} start and end per-file options. All files inside the { } will be affected by the options equally (similar to how global options and multiple files are handled). When playback of a file starts, the per-file options are set according to the command line. When playback ends, the per-file options are restored to the values when playback started.
2012-07-31 19:33:26 +00:00
success = true;
err_out:
free(addr);
free(unicast_url);
mplayer: turn playtree into a list, and change per-file option handling Summary: - There is no playtree anymore. It's reduced to a simple list. - Options are now always global. You can still have per-file options, but these are optional and require special syntax. - The slave command pt_step has been removed, and playlist_next and playlist_prev added. (See etc/input.conf changes.) This is a user visible incompatible change, and will break slave-mode applications. - The pt_clear slave command is renamed to playlist_clear. - Playtree entries could have multiple files. This is not the case anymore, and playlist entries have always exactly one entry. Whenever something adds more than one file (like ASX playlists or dvd:// or dvdnav:// on the command line), all files are added as separate playlist entries. Note that some of the changes are quite deep and violent. Expect regressions. The playlist parsing code in particular is of low quality. I didn't try to improve it, and merely spent to least effort necessary to keep it somehow working. (Especially ASX playlist handling.) The playtree code was complicated and bloated. It was also barely used. Most users don't even know that mplayer manages the playlist as tree, or how to use it. The most obscure features was probably specifying a tree on command line (with '{' and '}' to create/close tree nodes). It filled the player code with complexity and confused users with weird slave commands like pt_up. Replace the playtree with a simple flat playlist. Playlist parsers that actually return trees are changed to append all files to the playlist pre-order. It used to be the responsibility of the playtree code to change per-file config options. Now this is done by the player core, and the playlist code is free of such details. Options are not per-file by default anymore. This was a very obscure and complicated feature that confused even experienced users. Consider the following command line: mplayer file1.mkv file2.mkv --no-audio file3.mkv This will disable the audio for file2.mkv only, because options are per-file by default. To make the option affect all files, you're supposed to put it before the first file. This is bad, because normally you don't need per-file options. They are very rarely needed, and the only reasonable use cases I can imagine are use of the encode backend (mplayer encode branch), or for debugging. The normal use case is made harder, and the feature is perceived as bug. Even worse, correct usage is hard to explain for users. Make all options global by default. The position of an option isn't significant anymore (except for options that compensate each other, consider --shuffle --no-shuffle). One other important change is that no options are reset anymore if a new file is started. If you change settings with slave mode commands, they will not be changed by playing a new file. (Exceptions include settings that are too file specific, like audio/subtitle stream selection.) There is still some need for per-file options. Debugging and encoding are use cases that profit from per-file options. Per-file profiles (as well as per-protocol and per-VO/AO options) need the implementation related mechanisms to backup and restore options when the playback file changes. Simplify the save-slot stuff, which is possible because there is no hierarchical play tree anymore. Now there's a simple backup field. Add a way to specify per-file options on command line. Example: mplayer f1.mkv -o0 --{ -o1 f2.mkv -o2 f3.mkv --} f4.mkv -o3 will have the following options per file set: f1.mkv, f4.mkv: -o0 -o3 f2.mkv, f3.mkv: -o0 -o3 -o1 -o2 The options --{ and --} start and end per-file options. All files inside the { } will be affected by the options equally (similar to how global options and multiple files are handled). When playback of a file starts, the per-file options are set according to the command line. When playback ends, the per-file options are restored to the values when playback started.
2012-07-31 19:33:26 +00:00
return success;
}
mplayer: turn playtree into a list, and change per-file option handling Summary: - There is no playtree anymore. It's reduced to a simple list. - Options are now always global. You can still have per-file options, but these are optional and require special syntax. - The slave command pt_step has been removed, and playlist_next and playlist_prev added. (See etc/input.conf changes.) This is a user visible incompatible change, and will break slave-mode applications. - The pt_clear slave command is renamed to playlist_clear. - Playtree entries could have multiple files. This is not the case anymore, and playlist entries have always exactly one entry. Whenever something adds more than one file (like ASX playlists or dvd:// or dvdnav:// on the command line), all files are added as separate playlist entries. Note that some of the changes are quite deep and violent. Expect regressions. The playlist parsing code in particular is of low quality. I didn't try to improve it, and merely spent to least effort necessary to keep it somehow working. (Especially ASX playlist handling.) The playtree code was complicated and bloated. It was also barely used. Most users don't even know that mplayer manages the playlist as tree, or how to use it. The most obscure features was probably specifying a tree on command line (with '{' and '}' to create/close tree nodes). It filled the player code with complexity and confused users with weird slave commands like pt_up. Replace the playtree with a simple flat playlist. Playlist parsers that actually return trees are changed to append all files to the playlist pre-order. It used to be the responsibility of the playtree code to change per-file config options. Now this is done by the player core, and the playlist code is free of such details. Options are not per-file by default anymore. This was a very obscure and complicated feature that confused even experienced users. Consider the following command line: mplayer file1.mkv file2.mkv --no-audio file3.mkv This will disable the audio for file2.mkv only, because options are per-file by default. To make the option affect all files, you're supposed to put it before the first file. This is bad, because normally you don't need per-file options. They are very rarely needed, and the only reasonable use cases I can imagine are use of the encode backend (mplayer encode branch), or for debugging. The normal use case is made harder, and the feature is perceived as bug. Even worse, correct usage is hard to explain for users. Make all options global by default. The position of an option isn't significant anymore (except for options that compensate each other, consider --shuffle --no-shuffle). One other important change is that no options are reset anymore if a new file is started. If you change settings with slave mode commands, they will not be changed by playing a new file. (Exceptions include settings that are too file specific, like audio/subtitle stream selection.) There is still some need for per-file options. Debugging and encoding are use cases that profit from per-file options. Per-file profiles (as well as per-protocol and per-VO/AO options) need the implementation related mechanisms to backup and restore options when the playback file changes. Simplify the save-slot stuff, which is possible because there is no hierarchical play tree anymore. Now there's a simple backup field. Add a way to specify per-file options on command line. Example: mplayer f1.mkv -o0 --{ -o1 f2.mkv -o2 f3.mkv --} f4.mkv -o3 will have the following options per file set: f1.mkv, f4.mkv: -o0 -o3 f2.mkv, f3.mkv: -o0 -o3 -o1 -o2 The options --{ and --} start and end per-file options. All files inside the { } will be affected by the options equally (similar to how global options and multiple files are handled). When playback of a file starts, the per-file options are set according to the command line. When playback ends, the per-file options are restored to the values when playback started.
2012-07-31 19:33:26 +00:00
struct playlist *playlist_parse_file(const char *file)
{
stream_t *stream;
int f=DEMUXER_TYPE_PLAYLIST;
mplayer: turn playtree into a list, and change per-file option handling Summary: - There is no playtree anymore. It's reduced to a simple list. - Options are now always global. You can still have per-file options, but these are optional and require special syntax. - The slave command pt_step has been removed, and playlist_next and playlist_prev added. (See etc/input.conf changes.) This is a user visible incompatible change, and will break slave-mode applications. - The pt_clear slave command is renamed to playlist_clear. - Playtree entries could have multiple files. This is not the case anymore, and playlist entries have always exactly one entry. Whenever something adds more than one file (like ASX playlists or dvd:// or dvdnav:// on the command line), all files are added as separate playlist entries. Note that some of the changes are quite deep and violent. Expect regressions. The playlist parsing code in particular is of low quality. I didn't try to improve it, and merely spent to least effort necessary to keep it somehow working. (Especially ASX playlist handling.) The playtree code was complicated and bloated. It was also barely used. Most users don't even know that mplayer manages the playlist as tree, or how to use it. The most obscure features was probably specifying a tree on command line (with '{' and '}' to create/close tree nodes). It filled the player code with complexity and confused users with weird slave commands like pt_up. Replace the playtree with a simple flat playlist. Playlist parsers that actually return trees are changed to append all files to the playlist pre-order. It used to be the responsibility of the playtree code to change per-file config options. Now this is done by the player core, and the playlist code is free of such details. Options are not per-file by default anymore. This was a very obscure and complicated feature that confused even experienced users. Consider the following command line: mplayer file1.mkv file2.mkv --no-audio file3.mkv This will disable the audio for file2.mkv only, because options are per-file by default. To make the option affect all files, you're supposed to put it before the first file. This is bad, because normally you don't need per-file options. They are very rarely needed, and the only reasonable use cases I can imagine are use of the encode backend (mplayer encode branch), or for debugging. The normal use case is made harder, and the feature is perceived as bug. Even worse, correct usage is hard to explain for users. Make all options global by default. The position of an option isn't significant anymore (except for options that compensate each other, consider --shuffle --no-shuffle). One other important change is that no options are reset anymore if a new file is started. If you change settings with slave mode commands, they will not be changed by playing a new file. (Exceptions include settings that are too file specific, like audio/subtitle stream selection.) There is still some need for per-file options. Debugging and encoding are use cases that profit from per-file options. Per-file profiles (as well as per-protocol and per-VO/AO options) need the implementation related mechanisms to backup and restore options when the playback file changes. Simplify the save-slot stuff, which is possible because there is no hierarchical play tree anymore. Now there's a simple backup field. Add a way to specify per-file options on command line. Example: mplayer f1.mkv -o0 --{ -o1 f2.mkv -o2 f3.mkv --} f4.mkv -o3 will have the following options per file set: f1.mkv, f4.mkv: -o0 -o3 f2.mkv, f3.mkv: -o0 -o3 -o1 -o2 The options --{ and --} start and end per-file options. All files inside the { } will be affected by the options equally (similar to how global options and multiple files are handled). When playback of a file starts, the per-file options are set according to the command line. When playback ends, the per-file options are restored to the values when playback started.
2012-07-31 19:33:26 +00:00
stream = open_stream(file, 0, &f);
if(!stream) {
mp_msg(MSGT_PLAYTREE,MSGL_ERR,
mplayer: turn playtree into a list, and change per-file option handling Summary: - There is no playtree anymore. It's reduced to a simple list. - Options are now always global. You can still have per-file options, but these are optional and require special syntax. - The slave command pt_step has been removed, and playlist_next and playlist_prev added. (See etc/input.conf changes.) This is a user visible incompatible change, and will break slave-mode applications. - The pt_clear slave command is renamed to playlist_clear. - Playtree entries could have multiple files. This is not the case anymore, and playlist entries have always exactly one entry. Whenever something adds more than one file (like ASX playlists or dvd:// or dvdnav:// on the command line), all files are added as separate playlist entries. Note that some of the changes are quite deep and violent. Expect regressions. The playlist parsing code in particular is of low quality. I didn't try to improve it, and merely spent to least effort necessary to keep it somehow working. (Especially ASX playlist handling.) The playtree code was complicated and bloated. It was also barely used. Most users don't even know that mplayer manages the playlist as tree, or how to use it. The most obscure features was probably specifying a tree on command line (with '{' and '}' to create/close tree nodes). It filled the player code with complexity and confused users with weird slave commands like pt_up. Replace the playtree with a simple flat playlist. Playlist parsers that actually return trees are changed to append all files to the playlist pre-order. It used to be the responsibility of the playtree code to change per-file config options. Now this is done by the player core, and the playlist code is free of such details. Options are not per-file by default anymore. This was a very obscure and complicated feature that confused even experienced users. Consider the following command line: mplayer file1.mkv file2.mkv --no-audio file3.mkv This will disable the audio for file2.mkv only, because options are per-file by default. To make the option affect all files, you're supposed to put it before the first file. This is bad, because normally you don't need per-file options. They are very rarely needed, and the only reasonable use cases I can imagine are use of the encode backend (mplayer encode branch), or for debugging. The normal use case is made harder, and the feature is perceived as bug. Even worse, correct usage is hard to explain for users. Make all options global by default. The position of an option isn't significant anymore (except for options that compensate each other, consider --shuffle --no-shuffle). One other important change is that no options are reset anymore if a new file is started. If you change settings with slave mode commands, they will not be changed by playing a new file. (Exceptions include settings that are too file specific, like audio/subtitle stream selection.) There is still some need for per-file options. Debugging and encoding are use cases that profit from per-file options. Per-file profiles (as well as per-protocol and per-VO/AO options) need the implementation related mechanisms to backup and restore options when the playback file changes. Simplify the save-slot stuff, which is possible because there is no hierarchical play tree anymore. Now there's a simple backup field. Add a way to specify per-file options on command line. Example: mplayer f1.mkv -o0 --{ -o1 f2.mkv -o2 f3.mkv --} f4.mkv -o3 will have the following options per file set: f1.mkv, f4.mkv: -o0 -o3 f2.mkv, f3.mkv: -o0 -o3 -o1 -o2 The options --{ and --} start and end per-file options. All files inside the { } will be affected by the options equally (similar to how global options and multiple files are handled). When playback of a file starts, the per-file options are set according to the command line. When playback ends, the per-file options are restored to the values when playback started.
2012-07-31 19:33:26 +00:00
"Error while opening playlist file %s: %s\n",
file, strerror(errno));
return false;
}
mp_msg(MSGT_PLAYTREE, MSGL_V,
mplayer: turn playtree into a list, and change per-file option handling Summary: - There is no playtree anymore. It's reduced to a simple list. - Options are now always global. You can still have per-file options, but these are optional and require special syntax. - The slave command pt_step has been removed, and playlist_next and playlist_prev added. (See etc/input.conf changes.) This is a user visible incompatible change, and will break slave-mode applications. - The pt_clear slave command is renamed to playlist_clear. - Playtree entries could have multiple files. This is not the case anymore, and playlist entries have always exactly one entry. Whenever something adds more than one file (like ASX playlists or dvd:// or dvdnav:// on the command line), all files are added as separate playlist entries. Note that some of the changes are quite deep and violent. Expect regressions. The playlist parsing code in particular is of low quality. I didn't try to improve it, and merely spent to least effort necessary to keep it somehow working. (Especially ASX playlist handling.) The playtree code was complicated and bloated. It was also barely used. Most users don't even know that mplayer manages the playlist as tree, or how to use it. The most obscure features was probably specifying a tree on command line (with '{' and '}' to create/close tree nodes). It filled the player code with complexity and confused users with weird slave commands like pt_up. Replace the playtree with a simple flat playlist. Playlist parsers that actually return trees are changed to append all files to the playlist pre-order. It used to be the responsibility of the playtree code to change per-file config options. Now this is done by the player core, and the playlist code is free of such details. Options are not per-file by default anymore. This was a very obscure and complicated feature that confused even experienced users. Consider the following command line: mplayer file1.mkv file2.mkv --no-audio file3.mkv This will disable the audio for file2.mkv only, because options are per-file by default. To make the option affect all files, you're supposed to put it before the first file. This is bad, because normally you don't need per-file options. They are very rarely needed, and the only reasonable use cases I can imagine are use of the encode backend (mplayer encode branch), or for debugging. The normal use case is made harder, and the feature is perceived as bug. Even worse, correct usage is hard to explain for users. Make all options global by default. The position of an option isn't significant anymore (except for options that compensate each other, consider --shuffle --no-shuffle). One other important change is that no options are reset anymore if a new file is started. If you change settings with slave mode commands, they will not be changed by playing a new file. (Exceptions include settings that are too file specific, like audio/subtitle stream selection.) There is still some need for per-file options. Debugging and encoding are use cases that profit from per-file options. Per-file profiles (as well as per-protocol and per-VO/AO options) need the implementation related mechanisms to backup and restore options when the playback file changes. Simplify the save-slot stuff, which is possible because there is no hierarchical play tree anymore. Now there's a simple backup field. Add a way to specify per-file options on command line. Example: mplayer f1.mkv -o0 --{ -o1 f2.mkv -o2 f3.mkv --} f4.mkv -o3 will have the following options per file set: f1.mkv, f4.mkv: -o0 -o3 f2.mkv, f3.mkv: -o0 -o3 -o1 -o2 The options --{ and --} start and end per-file options. All files inside the { } will be affected by the options equally (similar to how global options and multiple files are handled). When playback of a file starts, the per-file options are set according to the command line. When playback ends, the per-file options are restored to the values when playback started.
2012-07-31 19:33:26 +00:00
"Parsing playlist file %s...\n", file);
mplayer: turn playtree into a list, and change per-file option handling Summary: - There is no playtree anymore. It's reduced to a simple list. - Options are now always global. You can still have per-file options, but these are optional and require special syntax. - The slave command pt_step has been removed, and playlist_next and playlist_prev added. (See etc/input.conf changes.) This is a user visible incompatible change, and will break slave-mode applications. - The pt_clear slave command is renamed to playlist_clear. - Playtree entries could have multiple files. This is not the case anymore, and playlist entries have always exactly one entry. Whenever something adds more than one file (like ASX playlists or dvd:// or dvdnav:// on the command line), all files are added as separate playlist entries. Note that some of the changes are quite deep and violent. Expect regressions. The playlist parsing code in particular is of low quality. I didn't try to improve it, and merely spent to least effort necessary to keep it somehow working. (Especially ASX playlist handling.) The playtree code was complicated and bloated. It was also barely used. Most users don't even know that mplayer manages the playlist as tree, or how to use it. The most obscure features was probably specifying a tree on command line (with '{' and '}' to create/close tree nodes). It filled the player code with complexity and confused users with weird slave commands like pt_up. Replace the playtree with a simple flat playlist. Playlist parsers that actually return trees are changed to append all files to the playlist pre-order. It used to be the responsibility of the playtree code to change per-file config options. Now this is done by the player core, and the playlist code is free of such details. Options are not per-file by default anymore. This was a very obscure and complicated feature that confused even experienced users. Consider the following command line: mplayer file1.mkv file2.mkv --no-audio file3.mkv This will disable the audio for file2.mkv only, because options are per-file by default. To make the option affect all files, you're supposed to put it before the first file. This is bad, because normally you don't need per-file options. They are very rarely needed, and the only reasonable use cases I can imagine are use of the encode backend (mplayer encode branch), or for debugging. The normal use case is made harder, and the feature is perceived as bug. Even worse, correct usage is hard to explain for users. Make all options global by default. The position of an option isn't significant anymore (except for options that compensate each other, consider --shuffle --no-shuffle). One other important change is that no options are reset anymore if a new file is started. If you change settings with slave mode commands, they will not be changed by playing a new file. (Exceptions include settings that are too file specific, like audio/subtitle stream selection.) There is still some need for per-file options. Debugging and encoding are use cases that profit from per-file options. Per-file profiles (as well as per-protocol and per-VO/AO options) need the implementation related mechanisms to backup and restore options when the playback file changes. Simplify the save-slot stuff, which is possible because there is no hierarchical play tree anymore. Now there's a simple backup field. Add a way to specify per-file options on command line. Example: mplayer f1.mkv -o0 --{ -o1 f2.mkv -o2 f3.mkv --} f4.mkv -o3 will have the following options per file set: f1.mkv, f4.mkv: -o0 -o3 f2.mkv, f3.mkv: -o0 -o3 -o1 -o2 The options --{ and --} start and end per-file options. All files inside the { } will be affected by the options equally (similar to how global options and multiple files are handled). When playback of a file starts, the per-file options are set according to the command line. When playback ends, the per-file options are restored to the values when playback started.
2012-07-31 19:33:26 +00:00
struct playlist *ret = playlist_parse(stream);
free_stream(stream);
mplayer: turn playtree into a list, and change per-file option handling Summary: - There is no playtree anymore. It's reduced to a simple list. - Options are now always global. You can still have per-file options, but these are optional and require special syntax. - The slave command pt_step has been removed, and playlist_next and playlist_prev added. (See etc/input.conf changes.) This is a user visible incompatible change, and will break slave-mode applications. - The pt_clear slave command is renamed to playlist_clear. - Playtree entries could have multiple files. This is not the case anymore, and playlist entries have always exactly one entry. Whenever something adds more than one file (like ASX playlists or dvd:// or dvdnav:// on the command line), all files are added as separate playlist entries. Note that some of the changes are quite deep and violent. Expect regressions. The playlist parsing code in particular is of low quality. I didn't try to improve it, and merely spent to least effort necessary to keep it somehow working. (Especially ASX playlist handling.) The playtree code was complicated and bloated. It was also barely used. Most users don't even know that mplayer manages the playlist as tree, or how to use it. The most obscure features was probably specifying a tree on command line (with '{' and '}' to create/close tree nodes). It filled the player code with complexity and confused users with weird slave commands like pt_up. Replace the playtree with a simple flat playlist. Playlist parsers that actually return trees are changed to append all files to the playlist pre-order. It used to be the responsibility of the playtree code to change per-file config options. Now this is done by the player core, and the playlist code is free of such details. Options are not per-file by default anymore. This was a very obscure and complicated feature that confused even experienced users. Consider the following command line: mplayer file1.mkv file2.mkv --no-audio file3.mkv This will disable the audio for file2.mkv only, because options are per-file by default. To make the option affect all files, you're supposed to put it before the first file. This is bad, because normally you don't need per-file options. They are very rarely needed, and the only reasonable use cases I can imagine are use of the encode backend (mplayer encode branch), or for debugging. The normal use case is made harder, and the feature is perceived as bug. Even worse, correct usage is hard to explain for users. Make all options global by default. The position of an option isn't significant anymore (except for options that compensate each other, consider --shuffle --no-shuffle). One other important change is that no options are reset anymore if a new file is started. If you change settings with slave mode commands, they will not be changed by playing a new file. (Exceptions include settings that are too file specific, like audio/subtitle stream selection.) There is still some need for per-file options. Debugging and encoding are use cases that profit from per-file options. Per-file profiles (as well as per-protocol and per-VO/AO options) need the implementation related mechanisms to backup and restore options when the playback file changes. Simplify the save-slot stuff, which is possible because there is no hierarchical play tree anymore. Now there's a simple backup field. Add a way to specify per-file options on command line. Example: mplayer f1.mkv -o0 --{ -o1 f2.mkv -o2 f3.mkv --} f4.mkv -o3 will have the following options per file set: f1.mkv, f4.mkv: -o0 -o3 f2.mkv, f3.mkv: -o0 -o3 -o1 -o2 The options --{ and --} start and end per-file options. All files inside the { } will be affected by the options equally (similar to how global options and multiple files are handled). When playback of a file starts, the per-file options are set according to the command line. When playback ends, the per-file options are restored to the values when playback started.
2012-07-31 19:33:26 +00:00
playlist_add_base_path(ret, mp_dirname(file));
return ret;
}
mplayer: turn playtree into a list, and change per-file option handling Summary: - There is no playtree anymore. It's reduced to a simple list. - Options are now always global. You can still have per-file options, but these are optional and require special syntax. - The slave command pt_step has been removed, and playlist_next and playlist_prev added. (See etc/input.conf changes.) This is a user visible incompatible change, and will break slave-mode applications. - The pt_clear slave command is renamed to playlist_clear. - Playtree entries could have multiple files. This is not the case anymore, and playlist entries have always exactly one entry. Whenever something adds more than one file (like ASX playlists or dvd:// or dvdnav:// on the command line), all files are added as separate playlist entries. Note that some of the changes are quite deep and violent. Expect regressions. The playlist parsing code in particular is of low quality. I didn't try to improve it, and merely spent to least effort necessary to keep it somehow working. (Especially ASX playlist handling.) The playtree code was complicated and bloated. It was also barely used. Most users don't even know that mplayer manages the playlist as tree, or how to use it. The most obscure features was probably specifying a tree on command line (with '{' and '}' to create/close tree nodes). It filled the player code with complexity and confused users with weird slave commands like pt_up. Replace the playtree with a simple flat playlist. Playlist parsers that actually return trees are changed to append all files to the playlist pre-order. It used to be the responsibility of the playtree code to change per-file config options. Now this is done by the player core, and the playlist code is free of such details. Options are not per-file by default anymore. This was a very obscure and complicated feature that confused even experienced users. Consider the following command line: mplayer file1.mkv file2.mkv --no-audio file3.mkv This will disable the audio for file2.mkv only, because options are per-file by default. To make the option affect all files, you're supposed to put it before the first file. This is bad, because normally you don't need per-file options. They are very rarely needed, and the only reasonable use cases I can imagine are use of the encode backend (mplayer encode branch), or for debugging. The normal use case is made harder, and the feature is perceived as bug. Even worse, correct usage is hard to explain for users. Make all options global by default. The position of an option isn't significant anymore (except for options that compensate each other, consider --shuffle --no-shuffle). One other important change is that no options are reset anymore if a new file is started. If you change settings with slave mode commands, they will not be changed by playing a new file. (Exceptions include settings that are too file specific, like audio/subtitle stream selection.) There is still some need for per-file options. Debugging and encoding are use cases that profit from per-file options. Per-file profiles (as well as per-protocol and per-VO/AO options) need the implementation related mechanisms to backup and restore options when the playback file changes. Simplify the save-slot stuff, which is possible because there is no hierarchical play tree anymore. Now there's a simple backup field. Add a way to specify per-file options on command line. Example: mplayer f1.mkv -o0 --{ -o1 f2.mkv -o2 f3.mkv --} f4.mkv -o3 will have the following options per file set: f1.mkv, f4.mkv: -o0 -o3 f2.mkv, f3.mkv: -o0 -o3 -o1 -o2 The options --{ and --} start and end per-file options. All files inside the { } will be affected by the options equally (similar to how global options and multiple files are handled). When playback of a file starts, the per-file options are set according to the command line. When playback ends, the per-file options are restored to the values when playback started.
2012-07-31 19:33:26 +00:00
typedef bool (*parser_fn)(play_tree_parser_t *);
static const parser_fn pl_parsers[] = {
parse_asx,
parse_pls,
parse_m3u,
parse_ref_ini,
parse_smil,
parse_nsc,
parse_textplain
};
mplayer: turn playtree into a list, and change per-file option handling Summary: - There is no playtree anymore. It's reduced to a simple list. - Options are now always global. You can still have per-file options, but these are optional and require special syntax. - The slave command pt_step has been removed, and playlist_next and playlist_prev added. (See etc/input.conf changes.) This is a user visible incompatible change, and will break slave-mode applications. - The pt_clear slave command is renamed to playlist_clear. - Playtree entries could have multiple files. This is not the case anymore, and playlist entries have always exactly one entry. Whenever something adds more than one file (like ASX playlists or dvd:// or dvdnav:// on the command line), all files are added as separate playlist entries. Note that some of the changes are quite deep and violent. Expect regressions. The playlist parsing code in particular is of low quality. I didn't try to improve it, and merely spent to least effort necessary to keep it somehow working. (Especially ASX playlist handling.) The playtree code was complicated and bloated. It was also barely used. Most users don't even know that mplayer manages the playlist as tree, or how to use it. The most obscure features was probably specifying a tree on command line (with '{' and '}' to create/close tree nodes). It filled the player code with complexity and confused users with weird slave commands like pt_up. Replace the playtree with a simple flat playlist. Playlist parsers that actually return trees are changed to append all files to the playlist pre-order. It used to be the responsibility of the playtree code to change per-file config options. Now this is done by the player core, and the playlist code is free of such details. Options are not per-file by default anymore. This was a very obscure and complicated feature that confused even experienced users. Consider the following command line: mplayer file1.mkv file2.mkv --no-audio file3.mkv This will disable the audio for file2.mkv only, because options are per-file by default. To make the option affect all files, you're supposed to put it before the first file. This is bad, because normally you don't need per-file options. They are very rarely needed, and the only reasonable use cases I can imagine are use of the encode backend (mplayer encode branch), or for debugging. The normal use case is made harder, and the feature is perceived as bug. Even worse, correct usage is hard to explain for users. Make all options global by default. The position of an option isn't significant anymore (except for options that compensate each other, consider --shuffle --no-shuffle). One other important change is that no options are reset anymore if a new file is started. If you change settings with slave mode commands, they will not be changed by playing a new file. (Exceptions include settings that are too file specific, like audio/subtitle stream selection.) There is still some need for per-file options. Debugging and encoding are use cases that profit from per-file options. Per-file profiles (as well as per-protocol and per-VO/AO options) need the implementation related mechanisms to backup and restore options when the playback file changes. Simplify the save-slot stuff, which is possible because there is no hierarchical play tree anymore. Now there's a simple backup field. Add a way to specify per-file options on command line. Example: mplayer f1.mkv -o0 --{ -o1 f2.mkv -o2 f3.mkv --} f4.mkv -o3 will have the following options per file set: f1.mkv, f4.mkv: -o0 -o3 f2.mkv, f3.mkv: -o0 -o3 -o1 -o2 The options --{ and --} start and end per-file options. All files inside the { } will be affected by the options equally (similar to how global options and multiple files are handled). When playback of a file starts, the per-file options are set according to the command line. When playback ends, the per-file options are restored to the values when playback started.
2012-07-31 19:33:26 +00:00
static struct playlist *do_parse(struct stream* stream, bool forced)
{
play_tree_parser_t p = {
.stream = stream,
.pl = talloc_zero(NULL, struct playlist),
.keep = 1,
};
bool success = false;
if (play_tree_parser_get_line(&p) != NULL) {
for (int n = 0; n < sizeof(pl_parsers) / sizeof(pl_parsers[0]); n++) {
play_tree_parser_reset(&p);
if (pl_parsers[n] == parse_textplain && !forced)
break;
if (pl_parsers[n](&p)) {
success = true;
break;
}
}
}
mplayer: turn playtree into a list, and change per-file option handling Summary: - There is no playtree anymore. It's reduced to a simple list. - Options are now always global. You can still have per-file options, but these are optional and require special syntax. - The slave command pt_step has been removed, and playlist_next and playlist_prev added. (See etc/input.conf changes.) This is a user visible incompatible change, and will break slave-mode applications. - The pt_clear slave command is renamed to playlist_clear. - Playtree entries could have multiple files. This is not the case anymore, and playlist entries have always exactly one entry. Whenever something adds more than one file (like ASX playlists or dvd:// or dvdnav:// on the command line), all files are added as separate playlist entries. Note that some of the changes are quite deep and violent. Expect regressions. The playlist parsing code in particular is of low quality. I didn't try to improve it, and merely spent to least effort necessary to keep it somehow working. (Especially ASX playlist handling.) The playtree code was complicated and bloated. It was also barely used. Most users don't even know that mplayer manages the playlist as tree, or how to use it. The most obscure features was probably specifying a tree on command line (with '{' and '}' to create/close tree nodes). It filled the player code with complexity and confused users with weird slave commands like pt_up. Replace the playtree with a simple flat playlist. Playlist parsers that actually return trees are changed to append all files to the playlist pre-order. It used to be the responsibility of the playtree code to change per-file config options. Now this is done by the player core, and the playlist code is free of such details. Options are not per-file by default anymore. This was a very obscure and complicated feature that confused even experienced users. Consider the following command line: mplayer file1.mkv file2.mkv --no-audio file3.mkv This will disable the audio for file2.mkv only, because options are per-file by default. To make the option affect all files, you're supposed to put it before the first file. This is bad, because normally you don't need per-file options. They are very rarely needed, and the only reasonable use cases I can imagine are use of the encode backend (mplayer encode branch), or for debugging. The normal use case is made harder, and the feature is perceived as bug. Even worse, correct usage is hard to explain for users. Make all options global by default. The position of an option isn't significant anymore (except for options that compensate each other, consider --shuffle --no-shuffle). One other important change is that no options are reset anymore if a new file is started. If you change settings with slave mode commands, they will not be changed by playing a new file. (Exceptions include settings that are too file specific, like audio/subtitle stream selection.) There is still some need for per-file options. Debugging and encoding are use cases that profit from per-file options. Per-file profiles (as well as per-protocol and per-VO/AO options) need the implementation related mechanisms to backup and restore options when the playback file changes. Simplify the save-slot stuff, which is possible because there is no hierarchical play tree anymore. Now there's a simple backup field. Add a way to specify per-file options on command line. Example: mplayer f1.mkv -o0 --{ -o1 f2.mkv -o2 f3.mkv --} f4.mkv -o3 will have the following options per file set: f1.mkv, f4.mkv: -o0 -o3 f2.mkv, f3.mkv: -o0 -o3 -o1 -o2 The options --{ and --} start and end per-file options. All files inside the { } will be affected by the options equally (similar to how global options and multiple files are handled). When playback of a file starts, the per-file options are set according to the command line. When playback ends, the per-file options are restored to the values when playback started.
2012-07-31 19:33:26 +00:00
if(success)
mp_msg(MSGT_PLAYTREE,MSGL_V,"Playlist successfully parsed\n");
mplayer: turn playtree into a list, and change per-file option handling Summary: - There is no playtree anymore. It's reduced to a simple list. - Options are now always global. You can still have per-file options, but these are optional and require special syntax. - The slave command pt_step has been removed, and playlist_next and playlist_prev added. (See etc/input.conf changes.) This is a user visible incompatible change, and will break slave-mode applications. - The pt_clear slave command is renamed to playlist_clear. - Playtree entries could have multiple files. This is not the case anymore, and playlist entries have always exactly one entry. Whenever something adds more than one file (like ASX playlists or dvd:// or dvdnav:// on the command line), all files are added as separate playlist entries. Note that some of the changes are quite deep and violent. Expect regressions. The playlist parsing code in particular is of low quality. I didn't try to improve it, and merely spent to least effort necessary to keep it somehow working. (Especially ASX playlist handling.) The playtree code was complicated and bloated. It was also barely used. Most users don't even know that mplayer manages the playlist as tree, or how to use it. The most obscure features was probably specifying a tree on command line (with '{' and '}' to create/close tree nodes). It filled the player code with complexity and confused users with weird slave commands like pt_up. Replace the playtree with a simple flat playlist. Playlist parsers that actually return trees are changed to append all files to the playlist pre-order. It used to be the responsibility of the playtree code to change per-file config options. Now this is done by the player core, and the playlist code is free of such details. Options are not per-file by default anymore. This was a very obscure and complicated feature that confused even experienced users. Consider the following command line: mplayer file1.mkv file2.mkv --no-audio file3.mkv This will disable the audio for file2.mkv only, because options are per-file by default. To make the option affect all files, you're supposed to put it before the first file. This is bad, because normally you don't need per-file options. They are very rarely needed, and the only reasonable use cases I can imagine are use of the encode backend (mplayer encode branch), or for debugging. The normal use case is made harder, and the feature is perceived as bug. Even worse, correct usage is hard to explain for users. Make all options global by default. The position of an option isn't significant anymore (except for options that compensate each other, consider --shuffle --no-shuffle). One other important change is that no options are reset anymore if a new file is started. If you change settings with slave mode commands, they will not be changed by playing a new file. (Exceptions include settings that are too file specific, like audio/subtitle stream selection.) There is still some need for per-file options. Debugging and encoding are use cases that profit from per-file options. Per-file profiles (as well as per-protocol and per-VO/AO options) need the implementation related mechanisms to backup and restore options when the playback file changes. Simplify the save-slot stuff, which is possible because there is no hierarchical play tree anymore. Now there's a simple backup field. Add a way to specify per-file options on command line. Example: mplayer f1.mkv -o0 --{ -o1 f2.mkv -o2 f3.mkv --} f4.mkv -o3 will have the following options per file set: f1.mkv, f4.mkv: -o0 -o3 f2.mkv, f3.mkv: -o0 -o3 -o1 -o2 The options --{ and --} start and end per-file options. All files inside the { } will be affected by the options equally (similar to how global options and multiple files are handled). When playback of a file starts, the per-file options are set according to the command line. When playback ends, the per-file options are restored to the values when playback started.
2012-07-31 19:33:26 +00:00
else {
mp_msg(MSGT_PLAYTREE,((forced==1)?MSGL_ERR:MSGL_V),"Error while parsing playlist\n");
mplayer: turn playtree into a list, and change per-file option handling Summary: - There is no playtree anymore. It's reduced to a simple list. - Options are now always global. You can still have per-file options, but these are optional and require special syntax. - The slave command pt_step has been removed, and playlist_next and playlist_prev added. (See etc/input.conf changes.) This is a user visible incompatible change, and will break slave-mode applications. - The pt_clear slave command is renamed to playlist_clear. - Playtree entries could have multiple files. This is not the case anymore, and playlist entries have always exactly one entry. Whenever something adds more than one file (like ASX playlists or dvd:// or dvdnav:// on the command line), all files are added as separate playlist entries. Note that some of the changes are quite deep and violent. Expect regressions. The playlist parsing code in particular is of low quality. I didn't try to improve it, and merely spent to least effort necessary to keep it somehow working. (Especially ASX playlist handling.) The playtree code was complicated and bloated. It was also barely used. Most users don't even know that mplayer manages the playlist as tree, or how to use it. The most obscure features was probably specifying a tree on command line (with '{' and '}' to create/close tree nodes). It filled the player code with complexity and confused users with weird slave commands like pt_up. Replace the playtree with a simple flat playlist. Playlist parsers that actually return trees are changed to append all files to the playlist pre-order. It used to be the responsibility of the playtree code to change per-file config options. Now this is done by the player core, and the playlist code is free of such details. Options are not per-file by default anymore. This was a very obscure and complicated feature that confused even experienced users. Consider the following command line: mplayer file1.mkv file2.mkv --no-audio file3.mkv This will disable the audio for file2.mkv only, because options are per-file by default. To make the option affect all files, you're supposed to put it before the first file. This is bad, because normally you don't need per-file options. They are very rarely needed, and the only reasonable use cases I can imagine are use of the encode backend (mplayer encode branch), or for debugging. The normal use case is made harder, and the feature is perceived as bug. Even worse, correct usage is hard to explain for users. Make all options global by default. The position of an option isn't significant anymore (except for options that compensate each other, consider --shuffle --no-shuffle). One other important change is that no options are reset anymore if a new file is started. If you change settings with slave mode commands, they will not be changed by playing a new file. (Exceptions include settings that are too file specific, like audio/subtitle stream selection.) There is still some need for per-file options. Debugging and encoding are use cases that profit from per-file options. Per-file profiles (as well as per-protocol and per-VO/AO options) need the implementation related mechanisms to backup and restore options when the playback file changes. Simplify the save-slot stuff, which is possible because there is no hierarchical play tree anymore. Now there's a simple backup field. Add a way to specify per-file options on command line. Example: mplayer f1.mkv -o0 --{ -o1 f2.mkv -o2 f3.mkv --} f4.mkv -o3 will have the following options per file set: f1.mkv, f4.mkv: -o0 -o3 f2.mkv, f3.mkv: -o0 -o3 -o1 -o2 The options --{ and --} start and end per-file options. All files inside the { } will be affected by the options equally (similar to how global options and multiple files are handled). When playback of a file starts, the per-file options are set according to the command line. When playback ends, the per-file options are restored to the values when playback started.
2012-07-31 19:33:26 +00:00
talloc_free(p.pl);
p.pl = NULL;
}
mplayer: turn playtree into a list, and change per-file option handling Summary: - There is no playtree anymore. It's reduced to a simple list. - Options are now always global. You can still have per-file options, but these are optional and require special syntax. - The slave command pt_step has been removed, and playlist_next and playlist_prev added. (See etc/input.conf changes.) This is a user visible incompatible change, and will break slave-mode applications. - The pt_clear slave command is renamed to playlist_clear. - Playtree entries could have multiple files. This is not the case anymore, and playlist entries have always exactly one entry. Whenever something adds more than one file (like ASX playlists or dvd:// or dvdnav:// on the command line), all files are added as separate playlist entries. Note that some of the changes are quite deep and violent. Expect regressions. The playlist parsing code in particular is of low quality. I didn't try to improve it, and merely spent to least effort necessary to keep it somehow working. (Especially ASX playlist handling.) The playtree code was complicated and bloated. It was also barely used. Most users don't even know that mplayer manages the playlist as tree, or how to use it. The most obscure features was probably specifying a tree on command line (with '{' and '}' to create/close tree nodes). It filled the player code with complexity and confused users with weird slave commands like pt_up. Replace the playtree with a simple flat playlist. Playlist parsers that actually return trees are changed to append all files to the playlist pre-order. It used to be the responsibility of the playtree code to change per-file config options. Now this is done by the player core, and the playlist code is free of such details. Options are not per-file by default anymore. This was a very obscure and complicated feature that confused even experienced users. Consider the following command line: mplayer file1.mkv file2.mkv --no-audio file3.mkv This will disable the audio for file2.mkv only, because options are per-file by default. To make the option affect all files, you're supposed to put it before the first file. This is bad, because normally you don't need per-file options. They are very rarely needed, and the only reasonable use cases I can imagine are use of the encode backend (mplayer encode branch), or for debugging. The normal use case is made harder, and the feature is perceived as bug. Even worse, correct usage is hard to explain for users. Make all options global by default. The position of an option isn't significant anymore (except for options that compensate each other, consider --shuffle --no-shuffle). One other important change is that no options are reset anymore if a new file is started. If you change settings with slave mode commands, they will not be changed by playing a new file. (Exceptions include settings that are too file specific, like audio/subtitle stream selection.) There is still some need for per-file options. Debugging and encoding are use cases that profit from per-file options. Per-file profiles (as well as per-protocol and per-VO/AO options) need the implementation related mechanisms to backup and restore options when the playback file changes. Simplify the save-slot stuff, which is possible because there is no hierarchical play tree anymore. Now there's a simple backup field. Add a way to specify per-file options on command line. Example: mplayer f1.mkv -o0 --{ -o1 f2.mkv -o2 f3.mkv --} f4.mkv -o3 will have the following options per file set: f1.mkv, f4.mkv: -o0 -o3 f2.mkv, f3.mkv: -o0 -o3 -o1 -o2 The options --{ and --} start and end per-file options. All files inside the { } will be affected by the options equally (similar to how global options and multiple files are handled). When playback of a file starts, the per-file options are set according to the command line. When playback ends, the per-file options are restored to the values when playback started.
2012-07-31 19:33:26 +00:00
if (p.pl && !p.pl->first)
mp_msg(MSGT_PLAYTREE,((forced==1)?MSGL_WARN:MSGL_V),"Warning: empty playlist\n");
mplayer: turn playtree into a list, and change per-file option handling Summary: - There is no playtree anymore. It's reduced to a simple list. - Options are now always global. You can still have per-file options, but these are optional and require special syntax. - The slave command pt_step has been removed, and playlist_next and playlist_prev added. (See etc/input.conf changes.) This is a user visible incompatible change, and will break slave-mode applications. - The pt_clear slave command is renamed to playlist_clear. - Playtree entries could have multiple files. This is not the case anymore, and playlist entries have always exactly one entry. Whenever something adds more than one file (like ASX playlists or dvd:// or dvdnav:// on the command line), all files are added as separate playlist entries. Note that some of the changes are quite deep and violent. Expect regressions. The playlist parsing code in particular is of low quality. I didn't try to improve it, and merely spent to least effort necessary to keep it somehow working. (Especially ASX playlist handling.) The playtree code was complicated and bloated. It was also barely used. Most users don't even know that mplayer manages the playlist as tree, or how to use it. The most obscure features was probably specifying a tree on command line (with '{' and '}' to create/close tree nodes). It filled the player code with complexity and confused users with weird slave commands like pt_up. Replace the playtree with a simple flat playlist. Playlist parsers that actually return trees are changed to append all files to the playlist pre-order. It used to be the responsibility of the playtree code to change per-file config options. Now this is done by the player core, and the playlist code is free of such details. Options are not per-file by default anymore. This was a very obscure and complicated feature that confused even experienced users. Consider the following command line: mplayer file1.mkv file2.mkv --no-audio file3.mkv This will disable the audio for file2.mkv only, because options are per-file by default. To make the option affect all files, you're supposed to put it before the first file. This is bad, because normally you don't need per-file options. They are very rarely needed, and the only reasonable use cases I can imagine are use of the encode backend (mplayer encode branch), or for debugging. The normal use case is made harder, and the feature is perceived as bug. Even worse, correct usage is hard to explain for users. Make all options global by default. The position of an option isn't significant anymore (except for options that compensate each other, consider --shuffle --no-shuffle). One other important change is that no options are reset anymore if a new file is started. If you change settings with slave mode commands, they will not be changed by playing a new file. (Exceptions include settings that are too file specific, like audio/subtitle stream selection.) There is still some need for per-file options. Debugging and encoding are use cases that profit from per-file options. Per-file profiles (as well as per-protocol and per-VO/AO options) need the implementation related mechanisms to backup and restore options when the playback file changes. Simplify the save-slot stuff, which is possible because there is no hierarchical play tree anymore. Now there's a simple backup field. Add a way to specify per-file options on command line. Example: mplayer f1.mkv -o0 --{ -o1 f2.mkv -o2 f3.mkv --} f4.mkv -o3 will have the following options per file set: f1.mkv, f4.mkv: -o0 -o3 f2.mkv, f3.mkv: -o0 -o3 -o1 -o2 The options --{ and --} start and end per-file options. All files inside the { } will be affected by the options equally (similar to how global options and multiple files are handled). When playback of a file starts, the per-file options are set according to the command line. When playback ends, the per-file options are restored to the values when playback started.
2012-07-31 19:33:26 +00:00
return p.pl;
}
mplayer: turn playtree into a list, and change per-file option handling Summary: - There is no playtree anymore. It's reduced to a simple list. - Options are now always global. You can still have per-file options, but these are optional and require special syntax. - The slave command pt_step has been removed, and playlist_next and playlist_prev added. (See etc/input.conf changes.) This is a user visible incompatible change, and will break slave-mode applications. - The pt_clear slave command is renamed to playlist_clear. - Playtree entries could have multiple files. This is not the case anymore, and playlist entries have always exactly one entry. Whenever something adds more than one file (like ASX playlists or dvd:// or dvdnav:// on the command line), all files are added as separate playlist entries. Note that some of the changes are quite deep and violent. Expect regressions. The playlist parsing code in particular is of low quality. I didn't try to improve it, and merely spent to least effort necessary to keep it somehow working. (Especially ASX playlist handling.) The playtree code was complicated and bloated. It was also barely used. Most users don't even know that mplayer manages the playlist as tree, or how to use it. The most obscure features was probably specifying a tree on command line (with '{' and '}' to create/close tree nodes). It filled the player code with complexity and confused users with weird slave commands like pt_up. Replace the playtree with a simple flat playlist. Playlist parsers that actually return trees are changed to append all files to the playlist pre-order. It used to be the responsibility of the playtree code to change per-file config options. Now this is done by the player core, and the playlist code is free of such details. Options are not per-file by default anymore. This was a very obscure and complicated feature that confused even experienced users. Consider the following command line: mplayer file1.mkv file2.mkv --no-audio file3.mkv This will disable the audio for file2.mkv only, because options are per-file by default. To make the option affect all files, you're supposed to put it before the first file. This is bad, because normally you don't need per-file options. They are very rarely needed, and the only reasonable use cases I can imagine are use of the encode backend (mplayer encode branch), or for debugging. The normal use case is made harder, and the feature is perceived as bug. Even worse, correct usage is hard to explain for users. Make all options global by default. The position of an option isn't significant anymore (except for options that compensate each other, consider --shuffle --no-shuffle). One other important change is that no options are reset anymore if a new file is started. If you change settings with slave mode commands, they will not be changed by playing a new file. (Exceptions include settings that are too file specific, like audio/subtitle stream selection.) There is still some need for per-file options. Debugging and encoding are use cases that profit from per-file options. Per-file profiles (as well as per-protocol and per-VO/AO options) need the implementation related mechanisms to backup and restore options when the playback file changes. Simplify the save-slot stuff, which is possible because there is no hierarchical play tree anymore. Now there's a simple backup field. Add a way to specify per-file options on command line. Example: mplayer f1.mkv -o0 --{ -o1 f2.mkv -o2 f3.mkv --} f4.mkv -o3 will have the following options per file set: f1.mkv, f4.mkv: -o0 -o3 f2.mkv, f3.mkv: -o0 -o3 -o1 -o2 The options --{ and --} start and end per-file options. All files inside the { } will be affected by the options equally (similar to how global options and multiple files are handled). When playback of a file starts, the per-file options are set according to the command line. When playback ends, the per-file options are restored to the values when playback started.
2012-07-31 19:33:26 +00:00
struct playlist *playlist_parse(struct stream* stream)
{
return do_parse(stream, true);
}
struct playlist *playlist_probe_and_parse(struct stream* stream)
{
return do_parse(stream, false);
}