1
0
mirror of https://github.com/mpv-player/mpv synced 2024-12-25 00:02:13 +00:00
mpv/options/parse_commandline.c

303 lines
9.3 KiB
C
Raw Normal View History

/*
* This file is part of mpv.
*
* mpv is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* mpv is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License along
* with mpv. If not, see <http://www.gnu.org/licenses/>.
*/
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <errno.h>
#include <assert.h>
#include <stdbool.h>
#include "osdep/io.h"
2013-12-21 22:11:12 +00:00
#include "common/global.h"
#include "common/msg.h"
#include "common/msg_control.h"
#include "m_option.h"
#include "m_config.h"
2013-12-21 22:11:12 +00:00
#include "options.h"
#include "common/playlist.h"
#include "parse_commandline.h"
#define GLOBAL 0
#define LOCAL 1
2014-03-17 17:30:26 +00:00
#define dvd_range(a) (a >= 0 && a < 255)
options: get rid of ambiguous option parsing Options parsing used to be ambiguous, as in the splitting into option and values pairs was ambiguous. Example: -option -something It wasn't clear whether -option actually takes an argument or not. The string "-something" could either be a separate option, or an argument to "-option". The code had to call the option specific parser function to resolve this. This made everything complicated and didn't even have a real use. There was only one case where this was actually used: string lists (m_option_type_string_list) and options based on it. That is because this option type actually turns a single option into a proxy for several real arguments, e.g. "vf*" can handle "-vf-add" and "-vf-clr". Options suffixed with "-clr" are the only options of this group which take no arguments. This is ambiguous only with the "old syntax" (as shown above). The "new" option syntax always puts option name and value into same argument. (E.g. "--option=--something" or "--option" "--something".) Simplify the code by making it statically known whether an option takes a parameter or not with the flag M_OPT_TYPE_OLD_SYNTAX_NO_PARAM. If it's set, the option parser assumes the option takes no argument. The only real ambiguity left, string list options that end on "-clr", are special cased in the parser. Remove some duplication of the logic in the command line parser by moving all argument splitting logic into split_opt(). (It's arguable whether that can be considered code duplication, but now the code is a bit simpler anyway. This might be subjective.) Remove the "ambiguous" parameter from all option parsing related code. Make m_config unaware of the pre-parsing concept. Make most CONF_NOCFG options also CONF_GLOBAL (except those explicitly usable as per-file options.)
2012-08-05 21:34:28 +00:00
struct parse_state {
struct m_config *config;
char **argv;
bool no_more_opts;
bool error;
bool is_opt;
options: get rid of ambiguous option parsing Options parsing used to be ambiguous, as in the splitting into option and values pairs was ambiguous. Example: -option -something It wasn't clear whether -option actually takes an argument or not. The string "-something" could either be a separate option, or an argument to "-option". The code had to call the option specific parser function to resolve this. This made everything complicated and didn't even have a real use. There was only one case where this was actually used: string lists (m_option_type_string_list) and options based on it. That is because this option type actually turns a single option into a proxy for several real arguments, e.g. "vf*" can handle "-vf-add" and "-vf-clr". Options suffixed with "-clr" are the only options of this group which take no arguments. This is ambiguous only with the "old syntax" (as shown above). The "new" option syntax always puts option name and value into same argument. (E.g. "--option=--something" or "--option" "--something".) Simplify the code by making it statically known whether an option takes a parameter or not with the flag M_OPT_TYPE_OLD_SYNTAX_NO_PARAM. If it's set, the option parser assumes the option takes no argument. The only real ambiguity left, string list options that end on "-clr", are special cased in the parser. Remove some duplication of the logic in the command line parser by moving all argument splitting logic into split_opt(). (It's arguable whether that can be considered code duplication, but now the code is a bit simpler anyway. This might be subjective.) Remove the "ambiguous" parameter from all option parsing related code. Make m_config unaware of the pre-parsing concept. Make most CONF_NOCFG options also CONF_GLOBAL (except those explicitly usable as per-file options.)
2012-08-05 21:34:28 +00:00
struct bstr arg;
struct bstr param;
};
// Returns 0 if a valid option/file is available, <0 on error, 1 on end of args.
static int split_opt_silent(struct parse_state *p)
{
options: get rid of ambiguous option parsing Options parsing used to be ambiguous, as in the splitting into option and values pairs was ambiguous. Example: -option -something It wasn't clear whether -option actually takes an argument or not. The string "-something" could either be a separate option, or an argument to "-option". The code had to call the option specific parser function to resolve this. This made everything complicated and didn't even have a real use. There was only one case where this was actually used: string lists (m_option_type_string_list) and options based on it. That is because this option type actually turns a single option into a proxy for several real arguments, e.g. "vf*" can handle "-vf-add" and "-vf-clr". Options suffixed with "-clr" are the only options of this group which take no arguments. This is ambiguous only with the "old syntax" (as shown above). The "new" option syntax always puts option name and value into same argument. (E.g. "--option=--something" or "--option" "--something".) Simplify the code by making it statically known whether an option takes a parameter or not with the flag M_OPT_TYPE_OLD_SYNTAX_NO_PARAM. If it's set, the option parser assumes the option takes no argument. The only real ambiguity left, string list options that end on "-clr", are special cased in the parser. Remove some duplication of the logic in the command line parser by moving all argument splitting logic into split_opt(). (It's arguable whether that can be considered code duplication, but now the code is a bit simpler anyway. This might be subjective.) Remove the "ambiguous" parameter from all option parsing related code. Make m_config unaware of the pre-parsing concept. Make most CONF_NOCFG options also CONF_GLOBAL (except those explicitly usable as per-file options.)
2012-08-05 21:34:28 +00:00
assert(!p->error);
if (!p->argv || !p->argv[0])
options: get rid of ambiguous option parsing Options parsing used to be ambiguous, as in the splitting into option and values pairs was ambiguous. Example: -option -something It wasn't clear whether -option actually takes an argument or not. The string "-something" could either be a separate option, or an argument to "-option". The code had to call the option specific parser function to resolve this. This made everything complicated and didn't even have a real use. There was only one case where this was actually used: string lists (m_option_type_string_list) and options based on it. That is because this option type actually turns a single option into a proxy for several real arguments, e.g. "vf*" can handle "-vf-add" and "-vf-clr". Options suffixed with "-clr" are the only options of this group which take no arguments. This is ambiguous only with the "old syntax" (as shown above). The "new" option syntax always puts option name and value into same argument. (E.g. "--option=--something" or "--option" "--something".) Simplify the code by making it statically known whether an option takes a parameter or not with the flag M_OPT_TYPE_OLD_SYNTAX_NO_PARAM. If it's set, the option parser assumes the option takes no argument. The only real ambiguity left, string list options that end on "-clr", are special cased in the parser. Remove some duplication of the logic in the command line parser by moving all argument splitting logic into split_opt(). (It's arguable whether that can be considered code duplication, but now the code is a bit simpler anyway. This might be subjective.) Remove the "ambiguous" parameter from all option parsing related code. Make m_config unaware of the pre-parsing concept. Make most CONF_NOCFG options also CONF_GLOBAL (except those explicitly usable as per-file options.)
2012-08-05 21:34:28 +00:00
return 1;
p->is_opt = false;
options: get rid of ambiguous option parsing Options parsing used to be ambiguous, as in the splitting into option and values pairs was ambiguous. Example: -option -something It wasn't clear whether -option actually takes an argument or not. The string "-something" could either be a separate option, or an argument to "-option". The code had to call the option specific parser function to resolve this. This made everything complicated and didn't even have a real use. There was only one case where this was actually used: string lists (m_option_type_string_list) and options based on it. That is because this option type actually turns a single option into a proxy for several real arguments, e.g. "vf*" can handle "-vf-add" and "-vf-clr". Options suffixed with "-clr" are the only options of this group which take no arguments. This is ambiguous only with the "old syntax" (as shown above). The "new" option syntax always puts option name and value into same argument. (E.g. "--option=--something" or "--option" "--something".) Simplify the code by making it statically known whether an option takes a parameter or not with the flag M_OPT_TYPE_OLD_SYNTAX_NO_PARAM. If it's set, the option parser assumes the option takes no argument. The only real ambiguity left, string list options that end on "-clr", are special cased in the parser. Remove some duplication of the logic in the command line parser by moving all argument splitting logic into split_opt(). (It's arguable whether that can be considered code duplication, but now the code is a bit simpler anyway. This might be subjective.) Remove the "ambiguous" parameter from all option parsing related code. Make m_config unaware of the pre-parsing concept. Make most CONF_NOCFG options also CONF_GLOBAL (except those explicitly usable as per-file options.)
2012-08-05 21:34:28 +00:00
p->arg = bstr0(p->argv[0]);
p->param = bstr0(NULL);
p->argv++;
if (p->no_more_opts || !bstr_startswith0(p->arg, "-") || p->arg.len == 1)
return 0;
if (bstrcmp0(p->arg, "--") == 0) {
p->no_more_opts = true;
return split_opt_silent(p);
}
p->is_opt = true;
options: get rid of ambiguous option parsing Options parsing used to be ambiguous, as in the splitting into option and values pairs was ambiguous. Example: -option -something It wasn't clear whether -option actually takes an argument or not. The string "-something" could either be a separate option, or an argument to "-option". The code had to call the option specific parser function to resolve this. This made everything complicated and didn't even have a real use. There was only one case where this was actually used: string lists (m_option_type_string_list) and options based on it. That is because this option type actually turns a single option into a proxy for several real arguments, e.g. "vf*" can handle "-vf-add" and "-vf-clr". Options suffixed with "-clr" are the only options of this group which take no arguments. This is ambiguous only with the "old syntax" (as shown above). The "new" option syntax always puts option name and value into same argument. (E.g. "--option=--something" or "--option" "--something".) Simplify the code by making it statically known whether an option takes a parameter or not with the flag M_OPT_TYPE_OLD_SYNTAX_NO_PARAM. If it's set, the option parser assumes the option takes no argument. The only real ambiguity left, string list options that end on "-clr", are special cased in the parser. Remove some duplication of the logic in the command line parser by moving all argument splitting logic into split_opt(). (It's arguable whether that can be considered code duplication, but now the code is a bit simpler anyway. This might be subjective.) Remove the "ambiguous" parameter from all option parsing related code. Make m_config unaware of the pre-parsing concept. Make most CONF_NOCFG options also CONF_GLOBAL (except those explicitly usable as per-file options.)
2012-08-05 21:34:28 +00:00
if (!bstr_eatstart0(&p->arg, "--"))
bstr_eatstart0(&p->arg, "-");
bool ambiguous = !bstr_split_tok(p->arg, "=", &p->arg, &p->param);
options: get rid of ambiguous option parsing Options parsing used to be ambiguous, as in the splitting into option and values pairs was ambiguous. Example: -option -something It wasn't clear whether -option actually takes an argument or not. The string "-something" could either be a separate option, or an argument to "-option". The code had to call the option specific parser function to resolve this. This made everything complicated and didn't even have a real use. There was only one case where this was actually used: string lists (m_option_type_string_list) and options based on it. That is because this option type actually turns a single option into a proxy for several real arguments, e.g. "vf*" can handle "-vf-add" and "-vf-clr". Options suffixed with "-clr" are the only options of this group which take no arguments. This is ambiguous only with the "old syntax" (as shown above). The "new" option syntax always puts option name and value into same argument. (E.g. "--option=--something" or "--option" "--something".) Simplify the code by making it statically known whether an option takes a parameter or not with the flag M_OPT_TYPE_OLD_SYNTAX_NO_PARAM. If it's set, the option parser assumes the option takes no argument. The only real ambiguity left, string list options that end on "-clr", are special cased in the parser. Remove some duplication of the logic in the command line parser by moving all argument splitting logic into split_opt(). (It's arguable whether that can be considered code duplication, but now the code is a bit simpler anyway. This might be subjective.) Remove the "ambiguous" parameter from all option parsing related code. Make m_config unaware of the pre-parsing concept. Make most CONF_NOCFG options also CONF_GLOBAL (except those explicitly usable as per-file options.)
2012-08-05 21:34:28 +00:00
if (!p->arg.len)
return M_OPT_INVALID;
bool need_param = m_config_option_requires_param(p->config, p->arg) > 0;
options: get rid of ambiguous option parsing Options parsing used to be ambiguous, as in the splitting into option and values pairs was ambiguous. Example: -option -something It wasn't clear whether -option actually takes an argument or not. The string "-something" could either be a separate option, or an argument to "-option". The code had to call the option specific parser function to resolve this. This made everything complicated and didn't even have a real use. There was only one case where this was actually used: string lists (m_option_type_string_list) and options based on it. That is because this option type actually turns a single option into a proxy for several real arguments, e.g. "vf*" can handle "-vf-add" and "-vf-clr". Options suffixed with "-clr" are the only options of this group which take no arguments. This is ambiguous only with the "old syntax" (as shown above). The "new" option syntax always puts option name and value into same argument. (E.g. "--option=--something" or "--option" "--something".) Simplify the code by making it statically known whether an option takes a parameter or not with the flag M_OPT_TYPE_OLD_SYNTAX_NO_PARAM. If it's set, the option parser assumes the option takes no argument. The only real ambiguity left, string list options that end on "-clr", are special cased in the parser. Remove some duplication of the logic in the command line parser by moving all argument splitting logic into split_opt(). (It's arguable whether that can be considered code duplication, but now the code is a bit simpler anyway. This might be subjective.) Remove the "ambiguous" parameter from all option parsing related code. Make m_config unaware of the pre-parsing concept. Make most CONF_NOCFG options also CONF_GLOBAL (except those explicitly usable as per-file options.)
2012-08-05 21:34:28 +00:00
if (ambiguous && need_param) {
if (!p->argv[0])
return M_OPT_MISSING_PARAM;
options: get rid of ambiguous option parsing Options parsing used to be ambiguous, as in the splitting into option and values pairs was ambiguous. Example: -option -something It wasn't clear whether -option actually takes an argument or not. The string "-something" could either be a separate option, or an argument to "-option". The code had to call the option specific parser function to resolve this. This made everything complicated and didn't even have a real use. There was only one case where this was actually used: string lists (m_option_type_string_list) and options based on it. That is because this option type actually turns a single option into a proxy for several real arguments, e.g. "vf*" can handle "-vf-add" and "-vf-clr". Options suffixed with "-clr" are the only options of this group which take no arguments. This is ambiguous only with the "old syntax" (as shown above). The "new" option syntax always puts option name and value into same argument. (E.g. "--option=--something" or "--option" "--something".) Simplify the code by making it statically known whether an option takes a parameter or not with the flag M_OPT_TYPE_OLD_SYNTAX_NO_PARAM. If it's set, the option parser assumes the option takes no argument. The only real ambiguity left, string list options that end on "-clr", are special cased in the parser. Remove some duplication of the logic in the command line parser by moving all argument splitting logic into split_opt(). (It's arguable whether that can be considered code duplication, but now the code is a bit simpler anyway. This might be subjective.) Remove the "ambiguous" parameter from all option parsing related code. Make m_config unaware of the pre-parsing concept. Make most CONF_NOCFG options also CONF_GLOBAL (except those explicitly usable as per-file options.)
2012-08-05 21:34:28 +00:00
p->param = bstr0(p->argv[0]);
p->argv++;
}
return 0;
}
options: get rid of ambiguous option parsing Options parsing used to be ambiguous, as in the splitting into option and values pairs was ambiguous. Example: -option -something It wasn't clear whether -option actually takes an argument or not. The string "-something" could either be a separate option, or an argument to "-option". The code had to call the option specific parser function to resolve this. This made everything complicated and didn't even have a real use. There was only one case where this was actually used: string lists (m_option_type_string_list) and options based on it. That is because this option type actually turns a single option into a proxy for several real arguments, e.g. "vf*" can handle "-vf-add" and "-vf-clr". Options suffixed with "-clr" are the only options of this group which take no arguments. This is ambiguous only with the "old syntax" (as shown above). The "new" option syntax always puts option name and value into same argument. (E.g. "--option=--something" or "--option" "--something".) Simplify the code by making it statically known whether an option takes a parameter or not with the flag M_OPT_TYPE_OLD_SYNTAX_NO_PARAM. If it's set, the option parser assumes the option takes no argument. The only real ambiguity left, string list options that end on "-clr", are special cased in the parser. Remove some duplication of the logic in the command line parser by moving all argument splitting logic into split_opt(). (It's arguable whether that can be considered code duplication, but now the code is a bit simpler anyway. This might be subjective.) Remove the "ambiguous" parameter from all option parsing related code. Make m_config unaware of the pre-parsing concept. Make most CONF_NOCFG options also CONF_GLOBAL (except those explicitly usable as per-file options.)
2012-08-05 21:34:28 +00:00
// Returns true if more args, false if all parsed or an error occurred.
static bool split_opt(struct parse_state *p)
{
options: get rid of ambiguous option parsing Options parsing used to be ambiguous, as in the splitting into option and values pairs was ambiguous. Example: -option -something It wasn't clear whether -option actually takes an argument or not. The string "-something" could either be a separate option, or an argument to "-option". The code had to call the option specific parser function to resolve this. This made everything complicated and didn't even have a real use. There was only one case where this was actually used: string lists (m_option_type_string_list) and options based on it. That is because this option type actually turns a single option into a proxy for several real arguments, e.g. "vf*" can handle "-vf-add" and "-vf-clr". Options suffixed with "-clr" are the only options of this group which take no arguments. This is ambiguous only with the "old syntax" (as shown above). The "new" option syntax always puts option name and value into same argument. (E.g. "--option=--something" or "--option" "--something".) Simplify the code by making it statically known whether an option takes a parameter or not with the flag M_OPT_TYPE_OLD_SYNTAX_NO_PARAM. If it's set, the option parser assumes the option takes no argument. The only real ambiguity left, string list options that end on "-clr", are special cased in the parser. Remove some duplication of the logic in the command line parser by moving all argument splitting logic into split_opt(). (It's arguable whether that can be considered code duplication, but now the code is a bit simpler anyway. This might be subjective.) Remove the "ambiguous" parameter from all option parsing related code. Make m_config unaware of the pre-parsing concept. Make most CONF_NOCFG options also CONF_GLOBAL (except those explicitly usable as per-file options.)
2012-08-05 21:34:28 +00:00
int r = split_opt_silent(p);
if (r >= 0)
return r == 0;
p->error = true;
MP_FATAL(p->config, "Error parsing command line option '%.*s': %s\n",
2013-12-21 19:08:34 +00:00
BSTR_P(p->arg), m_option_strerror(r));
options: get rid of ambiguous option parsing Options parsing used to be ambiguous, as in the splitting into option and values pairs was ambiguous. Example: -option -something It wasn't clear whether -option actually takes an argument or not. The string "-something" could either be a separate option, or an argument to "-option". The code had to call the option specific parser function to resolve this. This made everything complicated and didn't even have a real use. There was only one case where this was actually used: string lists (m_option_type_string_list) and options based on it. That is because this option type actually turns a single option into a proxy for several real arguments, e.g. "vf*" can handle "-vf-add" and "-vf-clr". Options suffixed with "-clr" are the only options of this group which take no arguments. This is ambiguous only with the "old syntax" (as shown above). The "new" option syntax always puts option name and value into same argument. (E.g. "--option=--something" or "--option" "--something".) Simplify the code by making it statically known whether an option takes a parameter or not with the flag M_OPT_TYPE_OLD_SYNTAX_NO_PARAM. If it's set, the option parser assumes the option takes no argument. The only real ambiguity left, string list options that end on "-clr", are special cased in the parser. Remove some duplication of the logic in the command line parser by moving all argument splitting logic into split_opt(). (It's arguable whether that can be considered code duplication, but now the code is a bit simpler anyway. This might be subjective.) Remove the "ambiguous" parameter from all option parsing related code. Make m_config unaware of the pre-parsing concept. Make most CONF_NOCFG options also CONF_GLOBAL (except those explicitly usable as per-file options.)
2012-08-05 21:34:28 +00:00
return false;
}
#ifdef __MINGW32__
static void process_non_option(struct playlist *files, const char *arg)
{
glob_t gg;
// Glob filenames on Windows (cmd.exe doesn't do this automatically)
if (glob(arg, 0, NULL, &gg)) {
playlist_add_file(files, arg);
} else {
for (int i = 0; i < gg.gl_pathc; i++)
playlist_add_file(files, gg.gl_pathv[i]);
globfree(&gg);
}
}
#else
static void process_non_option(struct playlist *files, const char *arg)
{
playlist_add_file(files, arg);
}
#endif
// returns M_OPT_... error code
int m_config_parse_mp_command_line(m_config_t *config, struct playlist *files,
struct mpv_global *global, char **argv)
{
int ret = M_OPT_UNKNOWN;
int mode = 0;
mplayer: turn playtree into a list, and change per-file option handling Summary: - There is no playtree anymore. It's reduced to a simple list. - Options are now always global. You can still have per-file options, but these are optional and require special syntax. - The slave command pt_step has been removed, and playlist_next and playlist_prev added. (See etc/input.conf changes.) This is a user visible incompatible change, and will break slave-mode applications. - The pt_clear slave command is renamed to playlist_clear. - Playtree entries could have multiple files. This is not the case anymore, and playlist entries have always exactly one entry. Whenever something adds more than one file (like ASX playlists or dvd:// or dvdnav:// on the command line), all files are added as separate playlist entries. Note that some of the changes are quite deep and violent. Expect regressions. The playlist parsing code in particular is of low quality. I didn't try to improve it, and merely spent to least effort necessary to keep it somehow working. (Especially ASX playlist handling.) The playtree code was complicated and bloated. It was also barely used. Most users don't even know that mplayer manages the playlist as tree, or how to use it. The most obscure features was probably specifying a tree on command line (with '{' and '}' to create/close tree nodes). It filled the player code with complexity and confused users with weird slave commands like pt_up. Replace the playtree with a simple flat playlist. Playlist parsers that actually return trees are changed to append all files to the playlist pre-order. It used to be the responsibility of the playtree code to change per-file config options. Now this is done by the player core, and the playlist code is free of such details. Options are not per-file by default anymore. This was a very obscure and complicated feature that confused even experienced users. Consider the following command line: mplayer file1.mkv file2.mkv --no-audio file3.mkv This will disable the audio for file2.mkv only, because options are per-file by default. To make the option affect all files, you're supposed to put it before the first file. This is bad, because normally you don't need per-file options. They are very rarely needed, and the only reasonable use cases I can imagine are use of the encode backend (mplayer encode branch), or for debugging. The normal use case is made harder, and the feature is perceived as bug. Even worse, correct usage is hard to explain for users. Make all options global by default. The position of an option isn't significant anymore (except for options that compensate each other, consider --shuffle --no-shuffle). One other important change is that no options are reset anymore if a new file is started. If you change settings with slave mode commands, they will not be changed by playing a new file. (Exceptions include settings that are too file specific, like audio/subtitle stream selection.) There is still some need for per-file options. Debugging and encoding are use cases that profit from per-file options. Per-file profiles (as well as per-protocol and per-VO/AO options) need the implementation related mechanisms to backup and restore options when the playback file changes. Simplify the save-slot stuff, which is possible because there is no hierarchical play tree anymore. Now there's a simple backup field. Add a way to specify per-file options on command line. Example: mplayer f1.mkv -o0 --{ -o1 f2.mkv -o2 f3.mkv --} f4.mkv -o3 will have the following options per file set: f1.mkv, f4.mkv: -o0 -o3 f2.mkv, f3.mkv: -o0 -o3 -o1 -o2 The options --{ and --} start and end per-file options. All files inside the { } will be affected by the options equally (similar to how global options and multiple files are handled). When playback of a file starts, the per-file options are set according to the command line. When playback ends, the per-file options are restored to the values when playback started.
2012-07-31 19:33:26 +00:00
struct playlist_entry *local_start = NULL;
int local_params_count = 0;
struct playlist_param *local_params = 0;
assert(config != NULL);
mode = GLOBAL;
struct parse_state p = {config, argv};
options: get rid of ambiguous option parsing Options parsing used to be ambiguous, as in the splitting into option and values pairs was ambiguous. Example: -option -something It wasn't clear whether -option actually takes an argument or not. The string "-something" could either be a separate option, or an argument to "-option". The code had to call the option specific parser function to resolve this. This made everything complicated and didn't even have a real use. There was only one case where this was actually used: string lists (m_option_type_string_list) and options based on it. That is because this option type actually turns a single option into a proxy for several real arguments, e.g. "vf*" can handle "-vf-add" and "-vf-clr". Options suffixed with "-clr" are the only options of this group which take no arguments. This is ambiguous only with the "old syntax" (as shown above). The "new" option syntax always puts option name and value into same argument. (E.g. "--option=--something" or "--option" "--something".) Simplify the code by making it statically known whether an option takes a parameter or not with the flag M_OPT_TYPE_OLD_SYNTAX_NO_PARAM. If it's set, the option parser assumes the option takes no argument. The only real ambiguity left, string list options that end on "-clr", are special cased in the parser. Remove some duplication of the logic in the command line parser by moving all argument splitting logic into split_opt(). (It's arguable whether that can be considered code duplication, but now the code is a bit simpler anyway. This might be subjective.) Remove the "ambiguous" parameter from all option parsing related code. Make m_config unaware of the pre-parsing concept. Make most CONF_NOCFG options also CONF_GLOBAL (except those explicitly usable as per-file options.)
2012-08-05 21:34:28 +00:00
while (split_opt(&p)) {
if (p.is_opt) {
int flags = M_SETOPT_FROM_CMDLINE;
if (mode == LOCAL)
flags |= M_SETOPT_BACKUP | M_SETOPT_CHECK_ONLY;
int r = m_config_set_option_ext(config, p.arg, p.param, flags);
if (r <= M_OPT_EXIT) {
ret = r;
goto err_out;
}
if (r < 0) {
MP_FATAL(config, "Setting command line option '--%.*s=%.*s' failed.\n",
2013-12-21 19:08:34 +00:00
BSTR_P(p.arg), BSTR_P(p.param));
mplayer: turn playtree into a list, and change per-file option handling Summary: - There is no playtree anymore. It's reduced to a simple list. - Options are now always global. You can still have per-file options, but these are optional and require special syntax. - The slave command pt_step has been removed, and playlist_next and playlist_prev added. (See etc/input.conf changes.) This is a user visible incompatible change, and will break slave-mode applications. - The pt_clear slave command is renamed to playlist_clear. - Playtree entries could have multiple files. This is not the case anymore, and playlist entries have always exactly one entry. Whenever something adds more than one file (like ASX playlists or dvd:// or dvdnav:// on the command line), all files are added as separate playlist entries. Note that some of the changes are quite deep and violent. Expect regressions. The playlist parsing code in particular is of low quality. I didn't try to improve it, and merely spent to least effort necessary to keep it somehow working. (Especially ASX playlist handling.) The playtree code was complicated and bloated. It was also barely used. Most users don't even know that mplayer manages the playlist as tree, or how to use it. The most obscure features was probably specifying a tree on command line (with '{' and '}' to create/close tree nodes). It filled the player code with complexity and confused users with weird slave commands like pt_up. Replace the playtree with a simple flat playlist. Playlist parsers that actually return trees are changed to append all files to the playlist pre-order. It used to be the responsibility of the playtree code to change per-file config options. Now this is done by the player core, and the playlist code is free of such details. Options are not per-file by default anymore. This was a very obscure and complicated feature that confused even experienced users. Consider the following command line: mplayer file1.mkv file2.mkv --no-audio file3.mkv This will disable the audio for file2.mkv only, because options are per-file by default. To make the option affect all files, you're supposed to put it before the first file. This is bad, because normally you don't need per-file options. They are very rarely needed, and the only reasonable use cases I can imagine are use of the encode backend (mplayer encode branch), or for debugging. The normal use case is made harder, and the feature is perceived as bug. Even worse, correct usage is hard to explain for users. Make all options global by default. The position of an option isn't significant anymore (except for options that compensate each other, consider --shuffle --no-shuffle). One other important change is that no options are reset anymore if a new file is started. If you change settings with slave mode commands, they will not be changed by playing a new file. (Exceptions include settings that are too file specific, like audio/subtitle stream selection.) There is still some need for per-file options. Debugging and encoding are use cases that profit from per-file options. Per-file profiles (as well as per-protocol and per-VO/AO options) need the implementation related mechanisms to backup and restore options when the playback file changes. Simplify the save-slot stuff, which is possible because there is no hierarchical play tree anymore. Now there's a simple backup field. Add a way to specify per-file options on command line. Example: mplayer f1.mkv -o0 --{ -o1 f2.mkv -o2 f3.mkv --} f4.mkv -o3 will have the following options per file set: f1.mkv, f4.mkv: -o0 -o3 f2.mkv, f3.mkv: -o0 -o3 -o1 -o2 The options --{ and --} start and end per-file options. All files inside the { } will be affected by the options equally (similar to how global options and multiple files are handled). When playback of a file starts, the per-file options are set according to the command line. When playback ends, the per-file options are restored to the values when playback started.
2012-07-31 19:33:26 +00:00
goto err_out;
}
options: get rid of ambiguous option parsing Options parsing used to be ambiguous, as in the splitting into option and values pairs was ambiguous. Example: -option -something It wasn't clear whether -option actually takes an argument or not. The string "-something" could either be a separate option, or an argument to "-option". The code had to call the option specific parser function to resolve this. This made everything complicated and didn't even have a real use. There was only one case where this was actually used: string lists (m_option_type_string_list) and options based on it. That is because this option type actually turns a single option into a proxy for several real arguments, e.g. "vf*" can handle "-vf-add" and "-vf-clr". Options suffixed with "-clr" are the only options of this group which take no arguments. This is ambiguous only with the "old syntax" (as shown above). The "new" option syntax always puts option name and value into same argument. (E.g. "--option=--something" or "--option" "--something".) Simplify the code by making it statically known whether an option takes a parameter or not with the flag M_OPT_TYPE_OLD_SYNTAX_NO_PARAM. If it's set, the option parser assumes the option takes no argument. The only real ambiguity left, string list options that end on "-clr", are special cased in the parser. Remove some duplication of the logic in the command line parser by moving all argument splitting logic into split_opt(). (It's arguable whether that can be considered code duplication, but now the code is a bit simpler anyway. This might be subjective.) Remove the "ambiguous" parameter from all option parsing related code. Make m_config unaware of the pre-parsing concept. Make most CONF_NOCFG options also CONF_GLOBAL (except those explicitly usable as per-file options.)
2012-08-05 21:34:28 +00:00
// Handle some special arguments outside option parser.
if (!bstrcmp0(p.arg, "{")) {
if (mode != GLOBAL) {
2013-12-21 19:08:34 +00:00
MP_ERR(config, "'--{' can not be nested.\n");
options: get rid of ambiguous option parsing Options parsing used to be ambiguous, as in the splitting into option and values pairs was ambiguous. Example: -option -something It wasn't clear whether -option actually takes an argument or not. The string "-something" could either be a separate option, or an argument to "-option". The code had to call the option specific parser function to resolve this. This made everything complicated and didn't even have a real use. There was only one case where this was actually used: string lists (m_option_type_string_list) and options based on it. That is because this option type actually turns a single option into a proxy for several real arguments, e.g. "vf*" can handle "-vf-add" and "-vf-clr". Options suffixed with "-clr" are the only options of this group which take no arguments. This is ambiguous only with the "old syntax" (as shown above). The "new" option syntax always puts option name and value into same argument. (E.g. "--option=--something" or "--option" "--something".) Simplify the code by making it statically known whether an option takes a parameter or not with the flag M_OPT_TYPE_OLD_SYNTAX_NO_PARAM. If it's set, the option parser assumes the option takes no argument. The only real ambiguity left, string list options that end on "-clr", are special cased in the parser. Remove some duplication of the logic in the command line parser by moving all argument splitting logic into split_opt(). (It's arguable whether that can be considered code duplication, but now the code is a bit simpler anyway. This might be subjective.) Remove the "ambiguous" parameter from all option parsing related code. Make m_config unaware of the pre-parsing concept. Make most CONF_NOCFG options also CONF_GLOBAL (except those explicitly usable as per-file options.)
2012-08-05 21:34:28 +00:00
goto err_out;
}
mode = LOCAL;
assert(!local_start);
local_start = files->last;
continue;
}
options: get rid of ambiguous option parsing Options parsing used to be ambiguous, as in the splitting into option and values pairs was ambiguous. Example: -option -something It wasn't clear whether -option actually takes an argument or not. The string "-something" could either be a separate option, or an argument to "-option". The code had to call the option specific parser function to resolve this. This made everything complicated and didn't even have a real use. There was only one case where this was actually used: string lists (m_option_type_string_list) and options based on it. That is because this option type actually turns a single option into a proxy for several real arguments, e.g. "vf*" can handle "-vf-add" and "-vf-clr". Options suffixed with "-clr" are the only options of this group which take no arguments. This is ambiguous only with the "old syntax" (as shown above). The "new" option syntax always puts option name and value into same argument. (E.g. "--option=--something" or "--option" "--something".) Simplify the code by making it statically known whether an option takes a parameter or not with the flag M_OPT_TYPE_OLD_SYNTAX_NO_PARAM. If it's set, the option parser assumes the option takes no argument. The only real ambiguity left, string list options that end on "-clr", are special cased in the parser. Remove some duplication of the logic in the command line parser by moving all argument splitting logic into split_opt(). (It's arguable whether that can be considered code duplication, but now the code is a bit simpler anyway. This might be subjective.) Remove the "ambiguous" parameter from all option parsing related code. Make m_config unaware of the pre-parsing concept. Make most CONF_NOCFG options also CONF_GLOBAL (except those explicitly usable as per-file options.)
2012-08-05 21:34:28 +00:00
if (!bstrcmp0(p.arg, "}")) {
if (mode != LOCAL) {
2013-12-21 19:08:34 +00:00
MP_ERR(config, "Too many closing '--}'.\n");
options: get rid of ambiguous option parsing Options parsing used to be ambiguous, as in the splitting into option and values pairs was ambiguous. Example: -option -something It wasn't clear whether -option actually takes an argument or not. The string "-something" could either be a separate option, or an argument to "-option". The code had to call the option specific parser function to resolve this. This made everything complicated and didn't even have a real use. There was only one case where this was actually used: string lists (m_option_type_string_list) and options based on it. That is because this option type actually turns a single option into a proxy for several real arguments, e.g. "vf*" can handle "-vf-add" and "-vf-clr". Options suffixed with "-clr" are the only options of this group which take no arguments. This is ambiguous only with the "old syntax" (as shown above). The "new" option syntax always puts option name and value into same argument. (E.g. "--option=--something" or "--option" "--something".) Simplify the code by making it statically known whether an option takes a parameter or not with the flag M_OPT_TYPE_OLD_SYNTAX_NO_PARAM. If it's set, the option parser assumes the option takes no argument. The only real ambiguity left, string list options that end on "-clr", are special cased in the parser. Remove some duplication of the logic in the command line parser by moving all argument splitting logic into split_opt(). (It's arguable whether that can be considered code duplication, but now the code is a bit simpler anyway. This might be subjective.) Remove the "ambiguous" parameter from all option parsing related code. Make m_config unaware of the pre-parsing concept. Make most CONF_NOCFG options also CONF_GLOBAL (except those explicitly usable as per-file options.)
2012-08-05 21:34:28 +00:00
goto err_out;
}
if (local_params_count) {
// The files added between '{' and '}' are the entries from
// the entry _after_ local_start, until the end of the list.
// If local_start is NULL, the list was empty on '{', and we
// want all files in the list.
struct playlist_entry *cur
= local_start ? local_start->next : files->first;
if (!cur)
2013-12-21 19:08:34 +00:00
MP_WARN(config, "Ignored options!\n");
options: get rid of ambiguous option parsing Options parsing used to be ambiguous, as in the splitting into option and values pairs was ambiguous. Example: -option -something It wasn't clear whether -option actually takes an argument or not. The string "-something" could either be a separate option, or an argument to "-option". The code had to call the option specific parser function to resolve this. This made everything complicated and didn't even have a real use. There was only one case where this was actually used: string lists (m_option_type_string_list) and options based on it. That is because this option type actually turns a single option into a proxy for several real arguments, e.g. "vf*" can handle "-vf-add" and "-vf-clr". Options suffixed with "-clr" are the only options of this group which take no arguments. This is ambiguous only with the "old syntax" (as shown above). The "new" option syntax always puts option name and value into same argument. (E.g. "--option=--something" or "--option" "--something".) Simplify the code by making it statically known whether an option takes a parameter or not with the flag M_OPT_TYPE_OLD_SYNTAX_NO_PARAM. If it's set, the option parser assumes the option takes no argument. The only real ambiguity left, string list options that end on "-clr", are special cased in the parser. Remove some duplication of the logic in the command line parser by moving all argument splitting logic into split_opt(). (It's arguable whether that can be considered code duplication, but now the code is a bit simpler anyway. This might be subjective.) Remove the "ambiguous" parameter from all option parsing related code. Make m_config unaware of the pre-parsing concept. Make most CONF_NOCFG options also CONF_GLOBAL (except those explicitly usable as per-file options.)
2012-08-05 21:34:28 +00:00
while (cur) {
playlist_entry_add_params(cur, local_params,
local_params_count);
cur = cur->next;
}
mplayer: turn playtree into a list, and change per-file option handling Summary: - There is no playtree anymore. It's reduced to a simple list. - Options are now always global. You can still have per-file options, but these are optional and require special syntax. - The slave command pt_step has been removed, and playlist_next and playlist_prev added. (See etc/input.conf changes.) This is a user visible incompatible change, and will break slave-mode applications. - The pt_clear slave command is renamed to playlist_clear. - Playtree entries could have multiple files. This is not the case anymore, and playlist entries have always exactly one entry. Whenever something adds more than one file (like ASX playlists or dvd:// or dvdnav:// on the command line), all files are added as separate playlist entries. Note that some of the changes are quite deep and violent. Expect regressions. The playlist parsing code in particular is of low quality. I didn't try to improve it, and merely spent to least effort necessary to keep it somehow working. (Especially ASX playlist handling.) The playtree code was complicated and bloated. It was also barely used. Most users don't even know that mplayer manages the playlist as tree, or how to use it. The most obscure features was probably specifying a tree on command line (with '{' and '}' to create/close tree nodes). It filled the player code with complexity and confused users with weird slave commands like pt_up. Replace the playtree with a simple flat playlist. Playlist parsers that actually return trees are changed to append all files to the playlist pre-order. It used to be the responsibility of the playtree code to change per-file config options. Now this is done by the player core, and the playlist code is free of such details. Options are not per-file by default anymore. This was a very obscure and complicated feature that confused even experienced users. Consider the following command line: mplayer file1.mkv file2.mkv --no-audio file3.mkv This will disable the audio for file2.mkv only, because options are per-file by default. To make the option affect all files, you're supposed to put it before the first file. This is bad, because normally you don't need per-file options. They are very rarely needed, and the only reasonable use cases I can imagine are use of the encode backend (mplayer encode branch), or for debugging. The normal use case is made harder, and the feature is perceived as bug. Even worse, correct usage is hard to explain for users. Make all options global by default. The position of an option isn't significant anymore (except for options that compensate each other, consider --shuffle --no-shuffle). One other important change is that no options are reset anymore if a new file is started. If you change settings with slave mode commands, they will not be changed by playing a new file. (Exceptions include settings that are too file specific, like audio/subtitle stream selection.) There is still some need for per-file options. Debugging and encoding are use cases that profit from per-file options. Per-file profiles (as well as per-protocol and per-VO/AO options) need the implementation related mechanisms to backup and restore options when the playback file changes. Simplify the save-slot stuff, which is possible because there is no hierarchical play tree anymore. Now there's a simple backup field. Add a way to specify per-file options on command line. Example: mplayer f1.mkv -o0 --{ -o1 f2.mkv -o2 f3.mkv --} f4.mkv -o3 will have the following options per file set: f1.mkv, f4.mkv: -o0 -o3 f2.mkv, f3.mkv: -o0 -o3 -o1 -o2 The options --{ and --} start and end per-file options. All files inside the { } will be affected by the options equally (similar to how global options and multiple files are handled). When playback of a file starts, the per-file options are set according to the command line. When playback ends, the per-file options are restored to the values when playback started.
2012-07-31 19:33:26 +00:00
}
options: get rid of ambiguous option parsing Options parsing used to be ambiguous, as in the splitting into option and values pairs was ambiguous. Example: -option -something It wasn't clear whether -option actually takes an argument or not. The string "-something" could either be a separate option, or an argument to "-option". The code had to call the option specific parser function to resolve this. This made everything complicated and didn't even have a real use. There was only one case where this was actually used: string lists (m_option_type_string_list) and options based on it. That is because this option type actually turns a single option into a proxy for several real arguments, e.g. "vf*" can handle "-vf-add" and "-vf-clr". Options suffixed with "-clr" are the only options of this group which take no arguments. This is ambiguous only with the "old syntax" (as shown above). The "new" option syntax always puts option name and value into same argument. (E.g. "--option=--something" or "--option" "--something".) Simplify the code by making it statically known whether an option takes a parameter or not with the flag M_OPT_TYPE_OLD_SYNTAX_NO_PARAM. If it's set, the option parser assumes the option takes no argument. The only real ambiguity left, string list options that end on "-clr", are special cased in the parser. Remove some duplication of the logic in the command line parser by moving all argument splitting logic into split_opt(). (It's arguable whether that can be considered code duplication, but now the code is a bit simpler anyway. This might be subjective.) Remove the "ambiguous" parameter from all option parsing related code. Make m_config unaware of the pre-parsing concept. Make most CONF_NOCFG options also CONF_GLOBAL (except those explicitly usable as per-file options.)
2012-08-05 21:34:28 +00:00
local_params_count = 0;
mode = GLOBAL;
m_config_restore_backups(config);
options: get rid of ambiguous option parsing Options parsing used to be ambiguous, as in the splitting into option and values pairs was ambiguous. Example: -option -something It wasn't clear whether -option actually takes an argument or not. The string "-something" could either be a separate option, or an argument to "-option". The code had to call the option specific parser function to resolve this. This made everything complicated and didn't even have a real use. There was only one case where this was actually used: string lists (m_option_type_string_list) and options based on it. That is because this option type actually turns a single option into a proxy for several real arguments, e.g. "vf*" can handle "-vf-add" and "-vf-clr". Options suffixed with "-clr" are the only options of this group which take no arguments. This is ambiguous only with the "old syntax" (as shown above). The "new" option syntax always puts option name and value into same argument. (E.g. "--option=--something" or "--option" "--something".) Simplify the code by making it statically known whether an option takes a parameter or not with the flag M_OPT_TYPE_OLD_SYNTAX_NO_PARAM. If it's set, the option parser assumes the option takes no argument. The only real ambiguity left, string list options that end on "-clr", are special cased in the parser. Remove some duplication of the logic in the command line parser by moving all argument splitting logic into split_opt(). (It's arguable whether that can be considered code duplication, but now the code is a bit simpler anyway. This might be subjective.) Remove the "ambiguous" parameter from all option parsing related code. Make m_config unaware of the pre-parsing concept. Make most CONF_NOCFG options also CONF_GLOBAL (except those explicitly usable as per-file options.)
2012-08-05 21:34:28 +00:00
local_start = NULL;
continue;
}
options: get rid of ambiguous option parsing Options parsing used to be ambiguous, as in the splitting into option and values pairs was ambiguous. Example: -option -something It wasn't clear whether -option actually takes an argument or not. The string "-something" could either be a separate option, or an argument to "-option". The code had to call the option specific parser function to resolve this. This made everything complicated and didn't even have a real use. There was only one case where this was actually used: string lists (m_option_type_string_list) and options based on it. That is because this option type actually turns a single option into a proxy for several real arguments, e.g. "vf*" can handle "-vf-add" and "-vf-clr". Options suffixed with "-clr" are the only options of this group which take no arguments. This is ambiguous only with the "old syntax" (as shown above). The "new" option syntax always puts option name and value into same argument. (E.g. "--option=--something" or "--option" "--something".) Simplify the code by making it statically known whether an option takes a parameter or not with the flag M_OPT_TYPE_OLD_SYNTAX_NO_PARAM. If it's set, the option parser assumes the option takes no argument. The only real ambiguity left, string list options that end on "-clr", are special cased in the parser. Remove some duplication of the logic in the command line parser by moving all argument splitting logic into split_opt(). (It's arguable whether that can be considered code duplication, but now the code is a bit simpler anyway. This might be subjective.) Remove the "ambiguous" parameter from all option parsing related code. Make m_config unaware of the pre-parsing concept. Make most CONF_NOCFG options also CONF_GLOBAL (except those explicitly usable as per-file options.)
2012-08-05 21:34:28 +00:00
if (bstrcmp0(p.arg, "playlist") == 0) {
mplayer: turn playtree into a list, and change per-file option handling Summary: - There is no playtree anymore. It's reduced to a simple list. - Options are now always global. You can still have per-file options, but these are optional and require special syntax. - The slave command pt_step has been removed, and playlist_next and playlist_prev added. (See etc/input.conf changes.) This is a user visible incompatible change, and will break slave-mode applications. - The pt_clear slave command is renamed to playlist_clear. - Playtree entries could have multiple files. This is not the case anymore, and playlist entries have always exactly one entry. Whenever something adds more than one file (like ASX playlists or dvd:// or dvdnav:// on the command line), all files are added as separate playlist entries. Note that some of the changes are quite deep and violent. Expect regressions. The playlist parsing code in particular is of low quality. I didn't try to improve it, and merely spent to least effort necessary to keep it somehow working. (Especially ASX playlist handling.) The playtree code was complicated and bloated. It was also barely used. Most users don't even know that mplayer manages the playlist as tree, or how to use it. The most obscure features was probably specifying a tree on command line (with '{' and '}' to create/close tree nodes). It filled the player code with complexity and confused users with weird slave commands like pt_up. Replace the playtree with a simple flat playlist. Playlist parsers that actually return trees are changed to append all files to the playlist pre-order. It used to be the responsibility of the playtree code to change per-file config options. Now this is done by the player core, and the playlist code is free of such details. Options are not per-file by default anymore. This was a very obscure and complicated feature that confused even experienced users. Consider the following command line: mplayer file1.mkv file2.mkv --no-audio file3.mkv This will disable the audio for file2.mkv only, because options are per-file by default. To make the option affect all files, you're supposed to put it before the first file. This is bad, because normally you don't need per-file options. They are very rarely needed, and the only reasonable use cases I can imagine are use of the encode backend (mplayer encode branch), or for debugging. The normal use case is made harder, and the feature is perceived as bug. Even worse, correct usage is hard to explain for users. Make all options global by default. The position of an option isn't significant anymore (except for options that compensate each other, consider --shuffle --no-shuffle). One other important change is that no options are reset anymore if a new file is started. If you change settings with slave mode commands, they will not be changed by playing a new file. (Exceptions include settings that are too file specific, like audio/subtitle stream selection.) There is still some need for per-file options. Debugging and encoding are use cases that profit from per-file options. Per-file profiles (as well as per-protocol and per-VO/AO options) need the implementation related mechanisms to backup and restore options when the playback file changes. Simplify the save-slot stuff, which is possible because there is no hierarchical play tree anymore. Now there's a simple backup field. Add a way to specify per-file options on command line. Example: mplayer f1.mkv -o0 --{ -o1 f2.mkv -o2 f3.mkv --} f4.mkv -o3 will have the following options per file set: f1.mkv, f4.mkv: -o0 -o3 f2.mkv, f3.mkv: -o0 -o3 -o1 -o2 The options --{ and --} start and end per-file options. All files inside the { } will be affected by the options equally (similar to how global options and multiple files are handled). When playback of a file starts, the per-file options are set according to the command line. When playback ends, the per-file options are restored to the values when playback started.
2012-07-31 19:33:26 +00:00
// append the playlist to the local args
options: get rid of ambiguous option parsing Options parsing used to be ambiguous, as in the splitting into option and values pairs was ambiguous. Example: -option -something It wasn't clear whether -option actually takes an argument or not. The string "-something" could either be a separate option, or an argument to "-option". The code had to call the option specific parser function to resolve this. This made everything complicated and didn't even have a real use. There was only one case where this was actually used: string lists (m_option_type_string_list) and options based on it. That is because this option type actually turns a single option into a proxy for several real arguments, e.g. "vf*" can handle "-vf-add" and "-vf-clr". Options suffixed with "-clr" are the only options of this group which take no arguments. This is ambiguous only with the "old syntax" (as shown above). The "new" option syntax always puts option name and value into same argument. (E.g. "--option=--something" or "--option" "--something".) Simplify the code by making it statically known whether an option takes a parameter or not with the flag M_OPT_TYPE_OLD_SYNTAX_NO_PARAM. If it's set, the option parser assumes the option takes no argument. The only real ambiguity left, string list options that end on "-clr", are special cased in the parser. Remove some duplication of the logic in the command line parser by moving all argument splitting logic into split_opt(). (It's arguable whether that can be considered code duplication, but now the code is a bit simpler anyway. This might be subjective.) Remove the "ambiguous" parameter from all option parsing related code. Make m_config unaware of the pre-parsing concept. Make most CONF_NOCFG options also CONF_GLOBAL (except those explicitly usable as per-file options.)
2012-08-05 21:34:28 +00:00
char *param0 = bstrdup0(NULL, p.param);
2013-12-21 19:15:47 +00:00
struct playlist *pl = playlist_parse_file(param0, global);
mplayer: turn playtree into a list, and change per-file option handling Summary: - There is no playtree anymore. It's reduced to a simple list. - Options are now always global. You can still have per-file options, but these are optional and require special syntax. - The slave command pt_step has been removed, and playlist_next and playlist_prev added. (See etc/input.conf changes.) This is a user visible incompatible change, and will break slave-mode applications. - The pt_clear slave command is renamed to playlist_clear. - Playtree entries could have multiple files. This is not the case anymore, and playlist entries have always exactly one entry. Whenever something adds more than one file (like ASX playlists or dvd:// or dvdnav:// on the command line), all files are added as separate playlist entries. Note that some of the changes are quite deep and violent. Expect regressions. The playlist parsing code in particular is of low quality. I didn't try to improve it, and merely spent to least effort necessary to keep it somehow working. (Especially ASX playlist handling.) The playtree code was complicated and bloated. It was also barely used. Most users don't even know that mplayer manages the playlist as tree, or how to use it. The most obscure features was probably specifying a tree on command line (with '{' and '}' to create/close tree nodes). It filled the player code with complexity and confused users with weird slave commands like pt_up. Replace the playtree with a simple flat playlist. Playlist parsers that actually return trees are changed to append all files to the playlist pre-order. It used to be the responsibility of the playtree code to change per-file config options. Now this is done by the player core, and the playlist code is free of such details. Options are not per-file by default anymore. This was a very obscure and complicated feature that confused even experienced users. Consider the following command line: mplayer file1.mkv file2.mkv --no-audio file3.mkv This will disable the audio for file2.mkv only, because options are per-file by default. To make the option affect all files, you're supposed to put it before the first file. This is bad, because normally you don't need per-file options. They are very rarely needed, and the only reasonable use cases I can imagine are use of the encode backend (mplayer encode branch), or for debugging. The normal use case is made harder, and the feature is perceived as bug. Even worse, correct usage is hard to explain for users. Make all options global by default. The position of an option isn't significant anymore (except for options that compensate each other, consider --shuffle --no-shuffle). One other important change is that no options are reset anymore if a new file is started. If you change settings with slave mode commands, they will not be changed by playing a new file. (Exceptions include settings that are too file specific, like audio/subtitle stream selection.) There is still some need for per-file options. Debugging and encoding are use cases that profit from per-file options. Per-file profiles (as well as per-protocol and per-VO/AO options) need the implementation related mechanisms to backup and restore options when the playback file changes. Simplify the save-slot stuff, which is possible because there is no hierarchical play tree anymore. Now there's a simple backup field. Add a way to specify per-file options on command line. Example: mplayer f1.mkv -o0 --{ -o1 f2.mkv -o2 f3.mkv --} f4.mkv -o3 will have the following options per file set: f1.mkv, f4.mkv: -o0 -o3 f2.mkv, f3.mkv: -o0 -o3 -o1 -o2 The options --{ and --} start and end per-file options. All files inside the { } will be affected by the options equally (similar to how global options and multiple files are handled). When playback of a file starts, the per-file options are set according to the command line. When playback ends, the per-file options are restored to the values when playback started.
2012-07-31 19:33:26 +00:00
talloc_free(param0);
if (!pl) {
MP_FATAL(config, "Error reading playlist '%.*s'\n",
BSTR_P(p.param));
goto err_out;
}
mplayer: turn playtree into a list, and change per-file option handling Summary: - There is no playtree anymore. It's reduced to a simple list. - Options are now always global. You can still have per-file options, but these are optional and require special syntax. - The slave command pt_step has been removed, and playlist_next and playlist_prev added. (See etc/input.conf changes.) This is a user visible incompatible change, and will break slave-mode applications. - The pt_clear slave command is renamed to playlist_clear. - Playtree entries could have multiple files. This is not the case anymore, and playlist entries have always exactly one entry. Whenever something adds more than one file (like ASX playlists or dvd:// or dvdnav:// on the command line), all files are added as separate playlist entries. Note that some of the changes are quite deep and violent. Expect regressions. The playlist parsing code in particular is of low quality. I didn't try to improve it, and merely spent to least effort necessary to keep it somehow working. (Especially ASX playlist handling.) The playtree code was complicated and bloated. It was also barely used. Most users don't even know that mplayer manages the playlist as tree, or how to use it. The most obscure features was probably specifying a tree on command line (with '{' and '}' to create/close tree nodes). It filled the player code with complexity and confused users with weird slave commands like pt_up. Replace the playtree with a simple flat playlist. Playlist parsers that actually return trees are changed to append all files to the playlist pre-order. It used to be the responsibility of the playtree code to change per-file config options. Now this is done by the player core, and the playlist code is free of such details. Options are not per-file by default anymore. This was a very obscure and complicated feature that confused even experienced users. Consider the following command line: mplayer file1.mkv file2.mkv --no-audio file3.mkv This will disable the audio for file2.mkv only, because options are per-file by default. To make the option affect all files, you're supposed to put it before the first file. This is bad, because normally you don't need per-file options. They are very rarely needed, and the only reasonable use cases I can imagine are use of the encode backend (mplayer encode branch), or for debugging. The normal use case is made harder, and the feature is perceived as bug. Even worse, correct usage is hard to explain for users. Make all options global by default. The position of an option isn't significant anymore (except for options that compensate each other, consider --shuffle --no-shuffle). One other important change is that no options are reset anymore if a new file is started. If you change settings with slave mode commands, they will not be changed by playing a new file. (Exceptions include settings that are too file specific, like audio/subtitle stream selection.) There is still some need for per-file options. Debugging and encoding are use cases that profit from per-file options. Per-file profiles (as well as per-protocol and per-VO/AO options) need the implementation related mechanisms to backup and restore options when the playback file changes. Simplify the save-slot stuff, which is possible because there is no hierarchical play tree anymore. Now there's a simple backup field. Add a way to specify per-file options on command line. Example: mplayer f1.mkv -o0 --{ -o1 f2.mkv -o2 f3.mkv --} f4.mkv -o3 will have the following options per file set: f1.mkv, f4.mkv: -o0 -o3 f2.mkv, f3.mkv: -o0 -o3 -o1 -o2 The options --{ and --} start and end per-file options. All files inside the { } will be affected by the options equally (similar to how global options and multiple files are handled). When playback of a file starts, the per-file options are set according to the command line. When playback ends, the per-file options are restored to the values when playback started.
2012-07-31 19:33:26 +00:00
playlist_transfer_entries(files, pl);
talloc_free(pl);
options: get rid of ambiguous option parsing Options parsing used to be ambiguous, as in the splitting into option and values pairs was ambiguous. Example: -option -something It wasn't clear whether -option actually takes an argument or not. The string "-something" could either be a separate option, or an argument to "-option". The code had to call the option specific parser function to resolve this. This made everything complicated and didn't even have a real use. There was only one case where this was actually used: string lists (m_option_type_string_list) and options based on it. That is because this option type actually turns a single option into a proxy for several real arguments, e.g. "vf*" can handle "-vf-add" and "-vf-clr". Options suffixed with "-clr" are the only options of this group which take no arguments. This is ambiguous only with the "old syntax" (as shown above). The "new" option syntax always puts option name and value into same argument. (E.g. "--option=--something" or "--option" "--something".) Simplify the code by making it statically known whether an option takes a parameter or not with the flag M_OPT_TYPE_OLD_SYNTAX_NO_PARAM. If it's set, the option parser assumes the option takes no argument. The only real ambiguity left, string list options that end on "-clr", are special cased in the parser. Remove some duplication of the logic in the command line parser by moving all argument splitting logic into split_opt(). (It's arguable whether that can be considered code duplication, but now the code is a bit simpler anyway. This might be subjective.) Remove the "ambiguous" parameter from all option parsing related code. Make m_config unaware of the pre-parsing concept. Make most CONF_NOCFG options also CONF_GLOBAL (except those explicitly usable as per-file options.)
2012-08-05 21:34:28 +00:00
continue;
}
if (mode == LOCAL) {
MP_TARRAY_APPEND(NULL, local_params, local_params_count,
(struct playlist_param) {p.arg, p.param});
}
} else {
// filename
void *tmp = talloc_new(NULL);
options: get rid of ambiguous option parsing Options parsing used to be ambiguous, as in the splitting into option and values pairs was ambiguous. Example: -option -something It wasn't clear whether -option actually takes an argument or not. The string "-something" could either be a separate option, or an argument to "-option". The code had to call the option specific parser function to resolve this. This made everything complicated and didn't even have a real use. There was only one case where this was actually used: string lists (m_option_type_string_list) and options based on it. That is because this option type actually turns a single option into a proxy for several real arguments, e.g. "vf*" can handle "-vf-add" and "-vf-clr". Options suffixed with "-clr" are the only options of this group which take no arguments. This is ambiguous only with the "old syntax" (as shown above). The "new" option syntax always puts option name and value into same argument. (E.g. "--option=--something" or "--option" "--something".) Simplify the code by making it statically known whether an option takes a parameter or not with the flag M_OPT_TYPE_OLD_SYNTAX_NO_PARAM. If it's set, the option parser assumes the option takes no argument. The only real ambiguity left, string list options that end on "-clr", are special cased in the parser. Remove some duplication of the logic in the command line parser by moving all argument splitting logic into split_opt(). (It's arguable whether that can be considered code duplication, but now the code is a bit simpler anyway. This might be subjective.) Remove the "ambiguous" parameter from all option parsing related code. Make m_config unaware of the pre-parsing concept. Make most CONF_NOCFG options also CONF_GLOBAL (except those explicitly usable as per-file options.)
2012-08-05 21:34:28 +00:00
bstr file = p.arg;
char *file0 = bstrdup0(tmp, p.arg);
// expand DVD filename entries like dvd://1-3 into component titles
if (bstr_startswith0(file, "dvd://")) {
int offset = 6;
options: get rid of ambiguous option parsing Options parsing used to be ambiguous, as in the splitting into option and values pairs was ambiguous. Example: -option -something It wasn't clear whether -option actually takes an argument or not. The string "-something" could either be a separate option, or an argument to "-option". The code had to call the option specific parser function to resolve this. This made everything complicated and didn't even have a real use. There was only one case where this was actually used: string lists (m_option_type_string_list) and options based on it. That is because this option type actually turns a single option into a proxy for several real arguments, e.g. "vf*" can handle "-vf-add" and "-vf-clr". Options suffixed with "-clr" are the only options of this group which take no arguments. This is ambiguous only with the "old syntax" (as shown above). The "new" option syntax always puts option name and value into same argument. (E.g. "--option=--something" or "--option" "--something".) Simplify the code by making it statically known whether an option takes a parameter or not with the flag M_OPT_TYPE_OLD_SYNTAX_NO_PARAM. If it's set, the option parser assumes the option takes no argument. The only real ambiguity left, string list options that end on "-clr", are special cased in the parser. Remove some duplication of the logic in the command line parser by moving all argument splitting logic into split_opt(). (It's arguable whether that can be considered code duplication, but now the code is a bit simpler anyway. This might be subjective.) Remove the "ambiguous" parameter from all option parsing related code. Make m_config unaware of the pre-parsing concept. Make most CONF_NOCFG options also CONF_GLOBAL (except those explicitly usable as per-file options.)
2012-08-05 21:34:28 +00:00
char *splitpos = strstr(file0 + offset, "-");
if (splitpos != NULL) {
char *endpos;
int start_title = strtol(file0 + offset, &endpos, 10);
int end_title;
//entries like dvd://-2 imply start at title 1
if (start_title < 0) {
end_title = abs(start_title);
start_title = 1;
} else
end_title = strtol(splitpos + 1, &endpos, 10);
if (dvd_range(start_title) && dvd_range(end_title)
&& (start_title < end_title)) {
for (int j = start_title; j <= end_title; j++) {
char *f = talloc_asprintf(tmp, "dvd://%d%s", j,
endpos);
playlist_add_file(files, f);
}
} else
2013-12-21 19:08:34 +00:00
MP_ERR(config, "Invalid play entry %s\n", file0);
} else // dvd:// or dvd://x entry
options: get rid of ambiguous option parsing Options parsing used to be ambiguous, as in the splitting into option and values pairs was ambiguous. Example: -option -something It wasn't clear whether -option actually takes an argument or not. The string "-something" could either be a separate option, or an argument to "-option". The code had to call the option specific parser function to resolve this. This made everything complicated and didn't even have a real use. There was only one case where this was actually used: string lists (m_option_type_string_list) and options based on it. That is because this option type actually turns a single option into a proxy for several real arguments, e.g. "vf*" can handle "-vf-add" and "-vf-clr". Options suffixed with "-clr" are the only options of this group which take no arguments. This is ambiguous only with the "old syntax" (as shown above). The "new" option syntax always puts option name and value into same argument. (E.g. "--option=--something" or "--option" "--something".) Simplify the code by making it statically known whether an option takes a parameter or not with the flag M_OPT_TYPE_OLD_SYNTAX_NO_PARAM. If it's set, the option parser assumes the option takes no argument. The only real ambiguity left, string list options that end on "-clr", are special cased in the parser. Remove some duplication of the logic in the command line parser by moving all argument splitting logic into split_opt(). (It's arguable whether that can be considered code duplication, but now the code is a bit simpler anyway. This might be subjective.) Remove the "ambiguous" parameter from all option parsing related code. Make m_config unaware of the pre-parsing concept. Make most CONF_NOCFG options also CONF_GLOBAL (except those explicitly usable as per-file options.)
2012-08-05 21:34:28 +00:00
playlist_add_file(files, file0);
} else {
process_non_option(files, file0);
}
talloc_free(tmp);
}
}
options: get rid of ambiguous option parsing Options parsing used to be ambiguous, as in the splitting into option and values pairs was ambiguous. Example: -option -something It wasn't clear whether -option actually takes an argument or not. The string "-something" could either be a separate option, or an argument to "-option". The code had to call the option specific parser function to resolve this. This made everything complicated and didn't even have a real use. There was only one case where this was actually used: string lists (m_option_type_string_list) and options based on it. That is because this option type actually turns a single option into a proxy for several real arguments, e.g. "vf*" can handle "-vf-add" and "-vf-clr". Options suffixed with "-clr" are the only options of this group which take no arguments. This is ambiguous only with the "old syntax" (as shown above). The "new" option syntax always puts option name and value into same argument. (E.g. "--option=--something" or "--option" "--something".) Simplify the code by making it statically known whether an option takes a parameter or not with the flag M_OPT_TYPE_OLD_SYNTAX_NO_PARAM. If it's set, the option parser assumes the option takes no argument. The only real ambiguity left, string list options that end on "-clr", are special cased in the parser. Remove some duplication of the logic in the command line parser by moving all argument splitting logic into split_opt(). (It's arguable whether that can be considered code duplication, but now the code is a bit simpler anyway. This might be subjective.) Remove the "ambiguous" parameter from all option parsing related code. Make m_config unaware of the pre-parsing concept. Make most CONF_NOCFG options also CONF_GLOBAL (except those explicitly usable as per-file options.)
2012-08-05 21:34:28 +00:00
if (p.error)
goto err_out;
mplayer: turn playtree into a list, and change per-file option handling Summary: - There is no playtree anymore. It's reduced to a simple list. - Options are now always global. You can still have per-file options, but these are optional and require special syntax. - The slave command pt_step has been removed, and playlist_next and playlist_prev added. (See etc/input.conf changes.) This is a user visible incompatible change, and will break slave-mode applications. - The pt_clear slave command is renamed to playlist_clear. - Playtree entries could have multiple files. This is not the case anymore, and playlist entries have always exactly one entry. Whenever something adds more than one file (like ASX playlists or dvd:// or dvdnav:// on the command line), all files are added as separate playlist entries. Note that some of the changes are quite deep and violent. Expect regressions. The playlist parsing code in particular is of low quality. I didn't try to improve it, and merely spent to least effort necessary to keep it somehow working. (Especially ASX playlist handling.) The playtree code was complicated and bloated. It was also barely used. Most users don't even know that mplayer manages the playlist as tree, or how to use it. The most obscure features was probably specifying a tree on command line (with '{' and '}' to create/close tree nodes). It filled the player code with complexity and confused users with weird slave commands like pt_up. Replace the playtree with a simple flat playlist. Playlist parsers that actually return trees are changed to append all files to the playlist pre-order. It used to be the responsibility of the playtree code to change per-file config options. Now this is done by the player core, and the playlist code is free of such details. Options are not per-file by default anymore. This was a very obscure and complicated feature that confused even experienced users. Consider the following command line: mplayer file1.mkv file2.mkv --no-audio file3.mkv This will disable the audio for file2.mkv only, because options are per-file by default. To make the option affect all files, you're supposed to put it before the first file. This is bad, because normally you don't need per-file options. They are very rarely needed, and the only reasonable use cases I can imagine are use of the encode backend (mplayer encode branch), or for debugging. The normal use case is made harder, and the feature is perceived as bug. Even worse, correct usage is hard to explain for users. Make all options global by default. The position of an option isn't significant anymore (except for options that compensate each other, consider --shuffle --no-shuffle). One other important change is that no options are reset anymore if a new file is started. If you change settings with slave mode commands, they will not be changed by playing a new file. (Exceptions include settings that are too file specific, like audio/subtitle stream selection.) There is still some need for per-file options. Debugging and encoding are use cases that profit from per-file options. Per-file profiles (as well as per-protocol and per-VO/AO options) need the implementation related mechanisms to backup and restore options when the playback file changes. Simplify the save-slot stuff, which is possible because there is no hierarchical play tree anymore. Now there's a simple backup field. Add a way to specify per-file options on command line. Example: mplayer f1.mkv -o0 --{ -o1 f2.mkv -o2 f3.mkv --} f4.mkv -o3 will have the following options per file set: f1.mkv, f4.mkv: -o0 -o3 f2.mkv, f3.mkv: -o0 -o3 -o1 -o2 The options --{ and --} start and end per-file options. All files inside the { } will be affected by the options equally (similar to how global options and multiple files are handled). When playback of a file starts, the per-file options are set according to the command line. When playback ends, the per-file options are restored to the values when playback started.
2012-07-31 19:33:26 +00:00
if (mode != GLOBAL) {
2013-12-21 19:08:34 +00:00
MP_ERR(config, "Missing closing --} on command line.\n");
mplayer: turn playtree into a list, and change per-file option handling Summary: - There is no playtree anymore. It's reduced to a simple list. - Options are now always global. You can still have per-file options, but these are optional and require special syntax. - The slave command pt_step has been removed, and playlist_next and playlist_prev added. (See etc/input.conf changes.) This is a user visible incompatible change, and will break slave-mode applications. - The pt_clear slave command is renamed to playlist_clear. - Playtree entries could have multiple files. This is not the case anymore, and playlist entries have always exactly one entry. Whenever something adds more than one file (like ASX playlists or dvd:// or dvdnav:// on the command line), all files are added as separate playlist entries. Note that some of the changes are quite deep and violent. Expect regressions. The playlist parsing code in particular is of low quality. I didn't try to improve it, and merely spent to least effort necessary to keep it somehow working. (Especially ASX playlist handling.) The playtree code was complicated and bloated. It was also barely used. Most users don't even know that mplayer manages the playlist as tree, or how to use it. The most obscure features was probably specifying a tree on command line (with '{' and '}' to create/close tree nodes). It filled the player code with complexity and confused users with weird slave commands like pt_up. Replace the playtree with a simple flat playlist. Playlist parsers that actually return trees are changed to append all files to the playlist pre-order. It used to be the responsibility of the playtree code to change per-file config options. Now this is done by the player core, and the playlist code is free of such details. Options are not per-file by default anymore. This was a very obscure and complicated feature that confused even experienced users. Consider the following command line: mplayer file1.mkv file2.mkv --no-audio file3.mkv This will disable the audio for file2.mkv only, because options are per-file by default. To make the option affect all files, you're supposed to put it before the first file. This is bad, because normally you don't need per-file options. They are very rarely needed, and the only reasonable use cases I can imagine are use of the encode backend (mplayer encode branch), or for debugging. The normal use case is made harder, and the feature is perceived as bug. Even worse, correct usage is hard to explain for users. Make all options global by default. The position of an option isn't significant anymore (except for options that compensate each other, consider --shuffle --no-shuffle). One other important change is that no options are reset anymore if a new file is started. If you change settings with slave mode commands, they will not be changed by playing a new file. (Exceptions include settings that are too file specific, like audio/subtitle stream selection.) There is still some need for per-file options. Debugging and encoding are use cases that profit from per-file options. Per-file profiles (as well as per-protocol and per-VO/AO options) need the implementation related mechanisms to backup and restore options when the playback file changes. Simplify the save-slot stuff, which is possible because there is no hierarchical play tree anymore. Now there's a simple backup field. Add a way to specify per-file options on command line. Example: mplayer f1.mkv -o0 --{ -o1 f2.mkv -o2 f3.mkv --} f4.mkv -o3 will have the following options per file set: f1.mkv, f4.mkv: -o0 -o3 f2.mkv, f3.mkv: -o0 -o3 -o1 -o2 The options --{ and --} start and end per-file options. All files inside the { } will be affected by the options equally (similar to how global options and multiple files are handled). When playback of a file starts, the per-file options are set according to the command line. When playback ends, the per-file options are restored to the values when playback started.
2012-07-31 19:33:26 +00:00
goto err_out;
}
ret = 0; // success
err_out:
mplayer: turn playtree into a list, and change per-file option handling Summary: - There is no playtree anymore. It's reduced to a simple list. - Options are now always global. You can still have per-file options, but these are optional and require special syntax. - The slave command pt_step has been removed, and playlist_next and playlist_prev added. (See etc/input.conf changes.) This is a user visible incompatible change, and will break slave-mode applications. - The pt_clear slave command is renamed to playlist_clear. - Playtree entries could have multiple files. This is not the case anymore, and playlist entries have always exactly one entry. Whenever something adds more than one file (like ASX playlists or dvd:// or dvdnav:// on the command line), all files are added as separate playlist entries. Note that some of the changes are quite deep and violent. Expect regressions. The playlist parsing code in particular is of low quality. I didn't try to improve it, and merely spent to least effort necessary to keep it somehow working. (Especially ASX playlist handling.) The playtree code was complicated and bloated. It was also barely used. Most users don't even know that mplayer manages the playlist as tree, or how to use it. The most obscure features was probably specifying a tree on command line (with '{' and '}' to create/close tree nodes). It filled the player code with complexity and confused users with weird slave commands like pt_up. Replace the playtree with a simple flat playlist. Playlist parsers that actually return trees are changed to append all files to the playlist pre-order. It used to be the responsibility of the playtree code to change per-file config options. Now this is done by the player core, and the playlist code is free of such details. Options are not per-file by default anymore. This was a very obscure and complicated feature that confused even experienced users. Consider the following command line: mplayer file1.mkv file2.mkv --no-audio file3.mkv This will disable the audio for file2.mkv only, because options are per-file by default. To make the option affect all files, you're supposed to put it before the first file. This is bad, because normally you don't need per-file options. They are very rarely needed, and the only reasonable use cases I can imagine are use of the encode backend (mplayer encode branch), or for debugging. The normal use case is made harder, and the feature is perceived as bug. Even worse, correct usage is hard to explain for users. Make all options global by default. The position of an option isn't significant anymore (except for options that compensate each other, consider --shuffle --no-shuffle). One other important change is that no options are reset anymore if a new file is started. If you change settings with slave mode commands, they will not be changed by playing a new file. (Exceptions include settings that are too file specific, like audio/subtitle stream selection.) There is still some need for per-file options. Debugging and encoding are use cases that profit from per-file options. Per-file profiles (as well as per-protocol and per-VO/AO options) need the implementation related mechanisms to backup and restore options when the playback file changes. Simplify the save-slot stuff, which is possible because there is no hierarchical play tree anymore. Now there's a simple backup field. Add a way to specify per-file options on command line. Example: mplayer f1.mkv -o0 --{ -o1 f2.mkv -o2 f3.mkv --} f4.mkv -o3 will have the following options per file set: f1.mkv, f4.mkv: -o0 -o3 f2.mkv, f3.mkv: -o0 -o3 -o1 -o2 The options --{ and --} start and end per-file options. All files inside the { } will be affected by the options equally (similar to how global options and multiple files are handled). When playback of a file starts, the per-file options are set according to the command line. When playback ends, the per-file options are restored to the values when playback started.
2012-07-31 19:33:26 +00:00
talloc_free(local_params);
m_config_restore_backups(config);
return ret;
}
/* Parse some command line options early before main parsing.
* --no-config prevents reading configuration files (otherwise done before
* command line parsing), and --really-quiet suppresses messages printed
* during normal options parsing.
*/
2013-12-21 22:11:12 +00:00
void m_config_preparse_command_line(m_config_t *config, struct mpv_global *global,
char **argv)
{
2013-12-21 22:11:12 +00:00
struct MPOpts *opts = global->opts;
struct parse_state p = {config, argv};
options: get rid of ambiguous option parsing Options parsing used to be ambiguous, as in the splitting into option and values pairs was ambiguous. Example: -option -something It wasn't clear whether -option actually takes an argument or not. The string "-something" could either be a separate option, or an argument to "-option". The code had to call the option specific parser function to resolve this. This made everything complicated and didn't even have a real use. There was only one case where this was actually used: string lists (m_option_type_string_list) and options based on it. That is because this option type actually turns a single option into a proxy for several real arguments, e.g. "vf*" can handle "-vf-add" and "-vf-clr". Options suffixed with "-clr" are the only options of this group which take no arguments. This is ambiguous only with the "old syntax" (as shown above). The "new" option syntax always puts option name and value into same argument. (E.g. "--option=--something" or "--option" "--something".) Simplify the code by making it statically known whether an option takes a parameter or not with the flag M_OPT_TYPE_OLD_SYNTAX_NO_PARAM. If it's set, the option parser assumes the option takes no argument. The only real ambiguity left, string list options that end on "-clr", are special cased in the parser. Remove some duplication of the logic in the command line parser by moving all argument splitting logic into split_opt(). (It's arguable whether that can be considered code duplication, but now the code is a bit simpler anyway. This might be subjective.) Remove the "ambiguous" parameter from all option parsing related code. Make m_config unaware of the pre-parsing concept. Make most CONF_NOCFG options also CONF_GLOBAL (except those explicitly usable as per-file options.)
2012-08-05 21:34:28 +00:00
while (split_opt_silent(&p) == 0) {
if (p.is_opt) {
options: get rid of ambiguous option parsing Options parsing used to be ambiguous, as in the splitting into option and values pairs was ambiguous. Example: -option -something It wasn't clear whether -option actually takes an argument or not. The string "-something" could either be a separate option, or an argument to "-option". The code had to call the option specific parser function to resolve this. This made everything complicated and didn't even have a real use. There was only one case where this was actually used: string lists (m_option_type_string_list) and options based on it. That is because this option type actually turns a single option into a proxy for several real arguments, e.g. "vf*" can handle "-vf-add" and "-vf-clr". Options suffixed with "-clr" are the only options of this group which take no arguments. This is ambiguous only with the "old syntax" (as shown above). The "new" option syntax always puts option name and value into same argument. (E.g. "--option=--something" or "--option" "--something".) Simplify the code by making it statically known whether an option takes a parameter or not with the flag M_OPT_TYPE_OLD_SYNTAX_NO_PARAM. If it's set, the option parser assumes the option takes no argument. The only real ambiguity left, string list options that end on "-clr", are special cased in the parser. Remove some duplication of the logic in the command line parser by moving all argument splitting logic into split_opt(). (It's arguable whether that can be considered code duplication, but now the code is a bit simpler anyway. This might be subjective.) Remove the "ambiguous" parameter from all option parsing related code. Make m_config unaware of the pre-parsing concept. Make most CONF_NOCFG options also CONF_GLOBAL (except those explicitly usable as per-file options.)
2012-08-05 21:34:28 +00:00
// Ignore non-pre-parse options. They will be set later.
// Option parsing errors will be handled later as well.
int flags = M_SETOPT_FROM_CMDLINE | M_SETOPT_PRE_PARSE_ONLY;
m_config_set_option_ext(config, p.arg, p.param, flags);
if (bstrcmp0(p.arg, "v") == 0)
2013-12-21 22:11:12 +00:00
opts->verbose++;
}
}
for (int n = 0; n < config->num_opts; n++)
config->opts[n].warning_was_printed = false;
}