mpv/player/misc.c

340 lines
10 KiB
C
Raw Normal View History

/*
* This file is part of mpv.
*
Relicense some non-MPlayer source files to LGPL 2.1 or later This covers source files which were added in mplayer2 and mpv times only, and where all code is covered by LGPL relicensing agreements. There are probably more files to which this applies, but I'm being conservative here. A file named ao_sdl.c exists in MPlayer too, but the mpv one is a complete rewrite, and was added some time after the original ao_sdl.c was removed. The same applies to vo_sdl.c, for which the SDL2 API is radically different in addition (MPlayer supports SDL 1.2 only). common.c contains only code written by me. But common.h is a strange case: although it originally was named mp_common.h and exists in MPlayer too, by now it contains only definitions written by uau and me. The exceptions are the CONTROL_ defines - thus not changing the license of common.h yet. codec_tags.c contained once large tables generated from MPlayer's codecs.conf, but all of these tables were removed. From demux_playlist.c I'm removing a code fragment from someone who was not asked; this probably could be done later (see commit 15dccc37). misc.c is a bit complicated to reason about (it was split off mplayer.c and thus contains random functions out of this file), but actually all functions have been added post-MPlayer. Except get_relative_time(), which was written by uau, but looks similar to 3 different versions of something similar in each of the Unix/win32/OSX timer source files. I'm not sure what that means in regards to copyright, so I've just moved it into another still-GPL source file for now. screenshot.c once had some minor parts of MPlayer's vf_screenshot.c, but they're all gone.
2016-01-19 17:36:06 +00:00
* mpv is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2.1 of the License, or (at your option) any later version.
*
* mpv is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
Relicense some non-MPlayer source files to LGPL 2.1 or later This covers source files which were added in mplayer2 and mpv times only, and where all code is covered by LGPL relicensing agreements. There are probably more files to which this applies, but I'm being conservative here. A file named ao_sdl.c exists in MPlayer too, but the mpv one is a complete rewrite, and was added some time after the original ao_sdl.c was removed. The same applies to vo_sdl.c, for which the SDL2 API is radically different in addition (MPlayer supports SDL 1.2 only). common.c contains only code written by me. But common.h is a strange case: although it originally was named mp_common.h and exists in MPlayer too, by now it contains only definitions written by uau and me. The exceptions are the CONTROL_ defines - thus not changing the license of common.h yet. codec_tags.c contained once large tables generated from MPlayer's codecs.conf, but all of these tables were removed. From demux_playlist.c I'm removing a code fragment from someone who was not asked; this probably could be done later (see commit 15dccc37). misc.c is a bit complicated to reason about (it was split off mplayer.c and thus contains random functions out of this file), but actually all functions have been added post-MPlayer. Except get_relative_time(), which was written by uau, but looks similar to 3 different versions of something similar in each of the Unix/win32/OSX timer source files. I'm not sure what that means in regards to copyright, so I've just moved it into another still-GPL source file for now. screenshot.c once had some minor parts of MPlayer's vf_screenshot.c, but they're all gone.
2016-01-19 17:36:06 +00:00
* GNU Lesser General Public License for more details.
*
Relicense some non-MPlayer source files to LGPL 2.1 or later This covers source files which were added in mplayer2 and mpv times only, and where all code is covered by LGPL relicensing agreements. There are probably more files to which this applies, but I'm being conservative here. A file named ao_sdl.c exists in MPlayer too, but the mpv one is a complete rewrite, and was added some time after the original ao_sdl.c was removed. The same applies to vo_sdl.c, for which the SDL2 API is radically different in addition (MPlayer supports SDL 1.2 only). common.c contains only code written by me. But common.h is a strange case: although it originally was named mp_common.h and exists in MPlayer too, by now it contains only definitions written by uau and me. The exceptions are the CONTROL_ defines - thus not changing the license of common.h yet. codec_tags.c contained once large tables generated from MPlayer's codecs.conf, but all of these tables were removed. From demux_playlist.c I'm removing a code fragment from someone who was not asked; this probably could be done later (see commit 15dccc37). misc.c is a bit complicated to reason about (it was split off mplayer.c and thus contains random functions out of this file), but actually all functions have been added post-MPlayer. Except get_relative_time(), which was written by uau, but looks similar to 3 different versions of something similar in each of the Unix/win32/OSX timer source files. I'm not sure what that means in regards to copyright, so I've just moved it into another still-GPL source file for now. screenshot.c once had some minor parts of MPlayer's vf_screenshot.c, but they're all gone.
2016-01-19 17:36:06 +00:00
* You should have received a copy of the GNU Lesser General Public
* License along with mpv. If not, see <http://www.gnu.org/licenses/>.
*/
#include <stddef.h>
#include <stdbool.h>
#include <errno.h>
#include <assert.h>
#include "mpv_talloc.h"
#include "osdep/io.h"
#include "osdep/timer.h"
#include "osdep/threads.h"
#include "common/msg.h"
#include "options/options.h"
#include "options/m_property.h"
#include "options/m_config.h"
#include "common/common.h"
#include "common/global.h"
#include "common/encode.h"
#include "common/playlist.h"
2013-12-17 00:23:09 +00:00
#include "input/input.h"
#include "audio/out/ao.h"
#include "demux/demux.h"
#include "stream/stream.h"
#include "video/out/vo.h"
#include "core.h"
#include "command.h"
const int num_ptracks[STREAM_TYPE_COUNT] = {
[STREAM_VIDEO] = 1,
[STREAM_AUDIO] = 1,
[STREAM_SUB] = 2,
};
player: modify/simplify AB-loop behavior This changes the behavior of the --ab-loop-a/b options. In addition, it makes it work with backward playback mode. The most obvious change is that the both the A and B point need to be set now before any looping happens. Unlike before, unset points don't implicitly use the start or end of the file. I think the old behavior was a feature that was explicitly added/wanted. Well, it's gone now. This is because of 2 reasons: 1. I never liked this feature, and it always got in my way (as user). 2. It's inherently annoying with backward playback mode. In backward playback mode, the user wants to set A/B in the wrong order. The ab-loop command will first set A, then B, so if you use this command during backward playback, A will be set to a higher timestamps than B. If you switch back to forward playback mode, the loop would stop working. I want the loop to just continue to work, and the chosen solution conflicts with the removed feature. The order issue above _could_ be fixed by also switching the AB-loop user option values around on direction switch. But there are no other instances of option changes magically affecting other options, and doing this would probably lead to unexpected misery (dying from corner cases and such). Another solution is sorting the A/B points by timestamps after copying them from the user options. Then A/B options set in backward mode will work in forward mode. This is the chosen solution. If you sort the points, you don't know anymore whether the unset point is supposed to signify the end or the start of the file. The AB-loop code is slightly better abstracted now, so it should be easy to restore the removed feature. It would still require coming up with a solution for backwards playback, though. A minor change is that if one point is set and the other is unset, I'm rendering both the chapter markers and the marker for the set point. Why? I don't know. My test file had chapters, and I guess I decided this looked better. This commit also fixes some subtle and obvious issues that I already forgot about when I wrote this commit message. It cleans up some minor code duplication and nonsense too. Regarding backward playback, the code uses an unsanitary mix of internal ("transformed") and user timestamps. So the play_dir variable appears more than usual. To mention one unfixed issue: if you set an AB-loop that is completely past the end of the file, it will get stuck in an infinite seeking loop once playback reaches the end of the file. Fixing this reliably seemed annoying, so the fix is "just don't do this". It's not a hard freeze anyway.
2019-05-26 23:24:22 +00:00
double rel_time_to_abs(struct MPContext *mpctx, struct m_rel_time t)
{
double length = get_time_length(mpctx);
// Relative times are an offset to the start of the file.
double start = 0;
if (mpctx->demuxer && !mpctx->opts->rebase_start_time)
start = mpctx->demuxer->start_time;
switch (t.type) {
case REL_TIME_ABSOLUTE:
return t.pos;
case REL_TIME_RELATIVE:
if (t.pos >= 0) {
return start + t.pos;
} else {
if (length >= 0)
return start + MPMAX(length + t.pos, 0.0);
}
break;
case REL_TIME_PERCENT:
if (length >= 0)
return start + length * (t.pos / 100.0);
break;
case REL_TIME_CHAPTER:
return chapter_start_time(mpctx, t.pos); // already absolute time
}
return MP_NOPTS_VALUE;
}
player: modify/simplify AB-loop behavior This changes the behavior of the --ab-loop-a/b options. In addition, it makes it work with backward playback mode. The most obvious change is that the both the A and B point need to be set now before any looping happens. Unlike before, unset points don't implicitly use the start or end of the file. I think the old behavior was a feature that was explicitly added/wanted. Well, it's gone now. This is because of 2 reasons: 1. I never liked this feature, and it always got in my way (as user). 2. It's inherently annoying with backward playback mode. In backward playback mode, the user wants to set A/B in the wrong order. The ab-loop command will first set A, then B, so if you use this command during backward playback, A will be set to a higher timestamps than B. If you switch back to forward playback mode, the loop would stop working. I want the loop to just continue to work, and the chosen solution conflicts with the removed feature. The order issue above _could_ be fixed by also switching the AB-loop user option values around on direction switch. But there are no other instances of option changes magically affecting other options, and doing this would probably lead to unexpected misery (dying from corner cases and such). Another solution is sorting the A/B points by timestamps after copying them from the user options. Then A/B options set in backward mode will work in forward mode. This is the chosen solution. If you sort the points, you don't know anymore whether the unset point is supposed to signify the end or the start of the file. The AB-loop code is slightly better abstracted now, so it should be easy to restore the removed feature. It would still require coming up with a solution for backwards playback, though. A minor change is that if one point is set and the other is unset, I'm rendering both the chapter markers and the marker for the set point. Why? I don't know. My test file had chapters, and I guess I decided this looked better. This commit also fixes some subtle and obvious issues that I already forgot about when I wrote this commit message. It cleans up some minor code duplication and nonsense too. Regarding backward playback, the code uses an unsanitary mix of internal ("transformed") and user timestamps. So the play_dir variable appears more than usual. To mention one unfixed issue: if you set an AB-loop that is completely past the end of the file, it will get stuck in an infinite seeking loop once playback reaches the end of the file. Fixing this reliably seemed annoying, so the fix is "just don't do this". It's not a hard freeze anyway.
2019-05-26 23:24:22 +00:00
static double get_play_end_pts_setting(struct MPContext *mpctx)
{
struct MPOpts *opts = mpctx->opts;
2019-05-25 23:24:29 +00:00
double end = rel_time_to_abs(mpctx, opts->play_end);
player: modify/simplify AB-loop behavior This changes the behavior of the --ab-loop-a/b options. In addition, it makes it work with backward playback mode. The most obvious change is that the both the A and B point need to be set now before any looping happens. Unlike before, unset points don't implicitly use the start or end of the file. I think the old behavior was a feature that was explicitly added/wanted. Well, it's gone now. This is because of 2 reasons: 1. I never liked this feature, and it always got in my way (as user). 2. It's inherently annoying with backward playback mode. In backward playback mode, the user wants to set A/B in the wrong order. The ab-loop command will first set A, then B, so if you use this command during backward playback, A will be set to a higher timestamps than B. If you switch back to forward playback mode, the loop would stop working. I want the loop to just continue to work, and the chosen solution conflicts with the removed feature. The order issue above _could_ be fixed by also switching the AB-loop user option values around on direction switch. But there are no other instances of option changes magically affecting other options, and doing this would probably lead to unexpected misery (dying from corner cases and such). Another solution is sorting the A/B points by timestamps after copying them from the user options. Then A/B options set in backward mode will work in forward mode. This is the chosen solution. If you sort the points, you don't know anymore whether the unset point is supposed to signify the end or the start of the file. The AB-loop code is slightly better abstracted now, so it should be easy to restore the removed feature. It would still require coming up with a solution for backwards playback, though. A minor change is that if one point is set and the other is unset, I'm rendering both the chapter markers and the marker for the set point. Why? I don't know. My test file had chapters, and I guess I decided this looked better. This commit also fixes some subtle and obvious issues that I already forgot about when I wrote this commit message. It cleans up some minor code duplication and nonsense too. Regarding backward playback, the code uses an unsanitary mix of internal ("transformed") and user timestamps. So the play_dir variable appears more than usual. To mention one unfixed issue: if you set an AB-loop that is completely past the end of the file, it will get stuck in an infinite seeking loop once playback reaches the end of the file. Fixing this reliably seemed annoying, so the fix is "just don't do this". It's not a hard freeze anyway.
2019-05-26 23:24:22 +00:00
double length = rel_time_to_abs(mpctx, opts->play_length);
if (length != MP_NOPTS_VALUE) {
double start = get_play_start_pts(mpctx);
player: modify/simplify AB-loop behavior This changes the behavior of the --ab-loop-a/b options. In addition, it makes it work with backward playback mode. The most obvious change is that the both the A and B point need to be set now before any looping happens. Unlike before, unset points don't implicitly use the start or end of the file. I think the old behavior was a feature that was explicitly added/wanted. Well, it's gone now. This is because of 2 reasons: 1. I never liked this feature, and it always got in my way (as user). 2. It's inherently annoying with backward playback mode. In backward playback mode, the user wants to set A/B in the wrong order. The ab-loop command will first set A, then B, so if you use this command during backward playback, A will be set to a higher timestamps than B. If you switch back to forward playback mode, the loop would stop working. I want the loop to just continue to work, and the chosen solution conflicts with the removed feature. The order issue above _could_ be fixed by also switching the AB-loop user option values around on direction switch. But there are no other instances of option changes magically affecting other options, and doing this would probably lead to unexpected misery (dying from corner cases and such). Another solution is sorting the A/B points by timestamps after copying them from the user options. Then A/B options set in backward mode will work in forward mode. This is the chosen solution. If you sort the points, you don't know anymore whether the unset point is supposed to signify the end or the start of the file. The AB-loop code is slightly better abstracted now, so it should be easy to restore the removed feature. It would still require coming up with a solution for backwards playback, though. A minor change is that if one point is set and the other is unset, I'm rendering both the chapter markers and the marker for the set point. Why? I don't know. My test file had chapters, and I guess I decided this looked better. This commit also fixes some subtle and obvious issues that I already forgot about when I wrote this commit message. It cleans up some minor code duplication and nonsense too. Regarding backward playback, the code uses an unsanitary mix of internal ("transformed") and user timestamps. So the play_dir variable appears more than usual. To mention one unfixed issue: if you set an AB-loop that is completely past the end of the file, it will get stuck in an infinite seeking loop once playback reaches the end of the file. Fixing this reliably seemed annoying, so the fix is "just don't do this". It's not a hard freeze anyway.
2019-05-26 23:24:22 +00:00
if (end == MP_NOPTS_VALUE || start + length < end)
end = start + length;
}
player: modify/simplify AB-loop behavior This changes the behavior of the --ab-loop-a/b options. In addition, it makes it work with backward playback mode. The most obvious change is that the both the A and B point need to be set now before any looping happens. Unlike before, unset points don't implicitly use the start or end of the file. I think the old behavior was a feature that was explicitly added/wanted. Well, it's gone now. This is because of 2 reasons: 1. I never liked this feature, and it always got in my way (as user). 2. It's inherently annoying with backward playback mode. In backward playback mode, the user wants to set A/B in the wrong order. The ab-loop command will first set A, then B, so if you use this command during backward playback, A will be set to a higher timestamps than B. If you switch back to forward playback mode, the loop would stop working. I want the loop to just continue to work, and the chosen solution conflicts with the removed feature. The order issue above _could_ be fixed by also switching the AB-loop user option values around on direction switch. But there are no other instances of option changes magically affecting other options, and doing this would probably lead to unexpected misery (dying from corner cases and such). Another solution is sorting the A/B points by timestamps after copying them from the user options. Then A/B options set in backward mode will work in forward mode. This is the chosen solution. If you sort the points, you don't know anymore whether the unset point is supposed to signify the end or the start of the file. The AB-loop code is slightly better abstracted now, so it should be easy to restore the removed feature. It would still require coming up with a solution for backwards playback, though. A minor change is that if one point is set and the other is unset, I'm rendering both the chapter markers and the marker for the set point. Why? I don't know. My test file had chapters, and I guess I decided this looked better. This commit also fixes some subtle and obvious issues that I already forgot about when I wrote this commit message. It cleans up some minor code duplication and nonsense too. Regarding backward playback, the code uses an unsanitary mix of internal ("transformed") and user timestamps. So the play_dir variable appears more than usual. To mention one unfixed issue: if you set an AB-loop that is completely past the end of the file, it will get stuck in an infinite seeking loop once playback reaches the end of the file. Fixing this reliably seemed annoying, so the fix is "just don't do this". It's not a hard freeze anyway.
2019-05-26 23:24:22 +00:00
return end;
}
// Return absolute timestamp against which currently playing media should be
// clipped. Returns MP_NOPTS_VALUE if no clipping should happen.
double get_play_end_pts(struct MPContext *mpctx)
{
double end = get_play_end_pts_setting(mpctx);
double ab[2];
if (mpctx->ab_loop_clip && get_ab_loop_times(mpctx, ab)) {
if (end == MP_NOPTS_VALUE || end > ab[1])
end = ab[1];
}
return end;
}
player: modify/simplify AB-loop behavior This changes the behavior of the --ab-loop-a/b options. In addition, it makes it work with backward playback mode. The most obvious change is that the both the A and B point need to be set now before any looping happens. Unlike before, unset points don't implicitly use the start or end of the file. I think the old behavior was a feature that was explicitly added/wanted. Well, it's gone now. This is because of 2 reasons: 1. I never liked this feature, and it always got in my way (as user). 2. It's inherently annoying with backward playback mode. In backward playback mode, the user wants to set A/B in the wrong order. The ab-loop command will first set A, then B, so if you use this command during backward playback, A will be set to a higher timestamps than B. If you switch back to forward playback mode, the loop would stop working. I want the loop to just continue to work, and the chosen solution conflicts with the removed feature. The order issue above _could_ be fixed by also switching the AB-loop user option values around on direction switch. But there are no other instances of option changes magically affecting other options, and doing this would probably lead to unexpected misery (dying from corner cases and such). Another solution is sorting the A/B points by timestamps after copying them from the user options. Then A/B options set in backward mode will work in forward mode. This is the chosen solution. If you sort the points, you don't know anymore whether the unset point is supposed to signify the end or the start of the file. The AB-loop code is slightly better abstracted now, so it should be easy to restore the removed feature. It would still require coming up with a solution for backwards playback, though. A minor change is that if one point is set and the other is unset, I'm rendering both the chapter markers and the marker for the set point. Why? I don't know. My test file had chapters, and I guess I decided this looked better. This commit also fixes some subtle and obvious issues that I already forgot about when I wrote this commit message. It cleans up some minor code duplication and nonsense too. Regarding backward playback, the code uses an unsanitary mix of internal ("transformed") and user timestamps. So the play_dir variable appears more than usual. To mention one unfixed issue: if you set an AB-loop that is completely past the end of the file, it will get stuck in an infinite seeking loop once playback reaches the end of the file. Fixing this reliably seemed annoying, so the fix is "just don't do this". It's not a hard freeze anyway.
2019-05-26 23:24:22 +00:00
// Get the absolute PTS at which playback should start.
// Never returns MP_NOPTS_VALUE.
double get_play_start_pts(struct MPContext *mpctx)
{
struct MPOpts *opts = mpctx->opts;
player: modify/simplify AB-loop behavior This changes the behavior of the --ab-loop-a/b options. In addition, it makes it work with backward playback mode. The most obvious change is that the both the A and B point need to be set now before any looping happens. Unlike before, unset points don't implicitly use the start or end of the file. I think the old behavior was a feature that was explicitly added/wanted. Well, it's gone now. This is because of 2 reasons: 1. I never liked this feature, and it always got in my way (as user). 2. It's inherently annoying with backward playback mode. In backward playback mode, the user wants to set A/B in the wrong order. The ab-loop command will first set A, then B, so if you use this command during backward playback, A will be set to a higher timestamps than B. If you switch back to forward playback mode, the loop would stop working. I want the loop to just continue to work, and the chosen solution conflicts with the removed feature. The order issue above _could_ be fixed by also switching the AB-loop user option values around on direction switch. But there are no other instances of option changes magically affecting other options, and doing this would probably lead to unexpected misery (dying from corner cases and such). Another solution is sorting the A/B points by timestamps after copying them from the user options. Then A/B options set in backward mode will work in forward mode. This is the chosen solution. If you sort the points, you don't know anymore whether the unset point is supposed to signify the end or the start of the file. The AB-loop code is slightly better abstracted now, so it should be easy to restore the removed feature. It would still require coming up with a solution for backwards playback, though. A minor change is that if one point is set and the other is unset, I'm rendering both the chapter markers and the marker for the set point. Why? I don't know. My test file had chapters, and I guess I decided this looked better. This commit also fixes some subtle and obvious issues that I already forgot about when I wrote this commit message. It cleans up some minor code duplication and nonsense too. Regarding backward playback, the code uses an unsanitary mix of internal ("transformed") and user timestamps. So the play_dir variable appears more than usual. To mention one unfixed issue: if you set an AB-loop that is completely past the end of the file, it will get stuck in an infinite seeking loop once playback reaches the end of the file. Fixing this reliably seemed annoying, so the fix is "just don't do this". It's not a hard freeze anyway.
2019-05-26 23:24:22 +00:00
double res = rel_time_to_abs(mpctx, opts->play_start);
if (res == MP_NOPTS_VALUE)
res = get_start_time(mpctx, mpctx->play_dir);
player: modify/simplify AB-loop behavior This changes the behavior of the --ab-loop-a/b options. In addition, it makes it work with backward playback mode. The most obvious change is that the both the A and B point need to be set now before any looping happens. Unlike before, unset points don't implicitly use the start or end of the file. I think the old behavior was a feature that was explicitly added/wanted. Well, it's gone now. This is because of 2 reasons: 1. I never liked this feature, and it always got in my way (as user). 2. It's inherently annoying with backward playback mode. In backward playback mode, the user wants to set A/B in the wrong order. The ab-loop command will first set A, then B, so if you use this command during backward playback, A will be set to a higher timestamps than B. If you switch back to forward playback mode, the loop would stop working. I want the loop to just continue to work, and the chosen solution conflicts with the removed feature. The order issue above _could_ be fixed by also switching the AB-loop user option values around on direction switch. But there are no other instances of option changes magically affecting other options, and doing this would probably lead to unexpected misery (dying from corner cases and such). Another solution is sorting the A/B points by timestamps after copying them from the user options. Then A/B options set in backward mode will work in forward mode. This is the chosen solution. If you sort the points, you don't know anymore whether the unset point is supposed to signify the end or the start of the file. The AB-loop code is slightly better abstracted now, so it should be easy to restore the removed feature. It would still require coming up with a solution for backwards playback, though. A minor change is that if one point is set and the other is unset, I'm rendering both the chapter markers and the marker for the set point. Why? I don't know. My test file had chapters, and I guess I decided this looked better. This commit also fixes some subtle and obvious issues that I already forgot about when I wrote this commit message. It cleans up some minor code duplication and nonsense too. Regarding backward playback, the code uses an unsanitary mix of internal ("transformed") and user timestamps. So the play_dir variable appears more than usual. To mention one unfixed issue: if you set an AB-loop that is completely past the end of the file, it will get stuck in an infinite seeking loop once playback reaches the end of the file. Fixing this reliably seemed annoying, so the fix is "just don't do this". It's not a hard freeze anyway.
2019-05-26 23:24:22 +00:00
return res;
}
player: modify/simplify AB-loop behavior This changes the behavior of the --ab-loop-a/b options. In addition, it makes it work with backward playback mode. The most obvious change is that the both the A and B point need to be set now before any looping happens. Unlike before, unset points don't implicitly use the start or end of the file. I think the old behavior was a feature that was explicitly added/wanted. Well, it's gone now. This is because of 2 reasons: 1. I never liked this feature, and it always got in my way (as user). 2. It's inherently annoying with backward playback mode. In backward playback mode, the user wants to set A/B in the wrong order. The ab-loop command will first set A, then B, so if you use this command during backward playback, A will be set to a higher timestamps than B. If you switch back to forward playback mode, the loop would stop working. I want the loop to just continue to work, and the chosen solution conflicts with the removed feature. The order issue above _could_ be fixed by also switching the AB-loop user option values around on direction switch. But there are no other instances of option changes magically affecting other options, and doing this would probably lead to unexpected misery (dying from corner cases and such). Another solution is sorting the A/B points by timestamps after copying them from the user options. Then A/B options set in backward mode will work in forward mode. This is the chosen solution. If you sort the points, you don't know anymore whether the unset point is supposed to signify the end or the start of the file. The AB-loop code is slightly better abstracted now, so it should be easy to restore the removed feature. It would still require coming up with a solution for backwards playback, though. A minor change is that if one point is set and the other is unset, I'm rendering both the chapter markers and the marker for the set point. Why? I don't know. My test file had chapters, and I guess I decided this looked better. This commit also fixes some subtle and obvious issues that I already forgot about when I wrote this commit message. It cleans up some minor code duplication and nonsense too. Regarding backward playback, the code uses an unsanitary mix of internal ("transformed") and user timestamps. So the play_dir variable appears more than usual. To mention one unfixed issue: if you set an AB-loop that is completely past the end of the file, it will get stuck in an infinite seeking loop once playback reaches the end of the file. Fixing this reliably seemed annoying, so the fix is "just don't do this". It's not a hard freeze anyway.
2019-05-26 23:24:22 +00:00
// Get timestamps to use for AB-loop. Returns false iff any of the timestamps
// are invalid and/or AB-loops are currently disabled, and set t[] to either
// the user options or NOPTS on best effort basis.
bool get_ab_loop_times(struct MPContext *mpctx, double t[2])
{
struct MPOpts *opts = mpctx->opts;
player: modify/simplify AB-loop behavior This changes the behavior of the --ab-loop-a/b options. In addition, it makes it work with backward playback mode. The most obvious change is that the both the A and B point need to be set now before any looping happens. Unlike before, unset points don't implicitly use the start or end of the file. I think the old behavior was a feature that was explicitly added/wanted. Well, it's gone now. This is because of 2 reasons: 1. I never liked this feature, and it always got in my way (as user). 2. It's inherently annoying with backward playback mode. In backward playback mode, the user wants to set A/B in the wrong order. The ab-loop command will first set A, then B, so if you use this command during backward playback, A will be set to a higher timestamps than B. If you switch back to forward playback mode, the loop would stop working. I want the loop to just continue to work, and the chosen solution conflicts with the removed feature. The order issue above _could_ be fixed by also switching the AB-loop user option values around on direction switch. But there are no other instances of option changes magically affecting other options, and doing this would probably lead to unexpected misery (dying from corner cases and such). Another solution is sorting the A/B points by timestamps after copying them from the user options. Then A/B options set in backward mode will work in forward mode. This is the chosen solution. If you sort the points, you don't know anymore whether the unset point is supposed to signify the end or the start of the file. The AB-loop code is slightly better abstracted now, so it should be easy to restore the removed feature. It would still require coming up with a solution for backwards playback, though. A minor change is that if one point is set and the other is unset, I'm rendering both the chapter markers and the marker for the set point. Why? I don't know. My test file had chapters, and I guess I decided this looked better. This commit also fixes some subtle and obvious issues that I already forgot about when I wrote this commit message. It cleans up some minor code duplication and nonsense too. Regarding backward playback, the code uses an unsanitary mix of internal ("transformed") and user timestamps. So the play_dir variable appears more than usual. To mention one unfixed issue: if you set an AB-loop that is completely past the end of the file, it will get stuck in an infinite seeking loop once playback reaches the end of the file. Fixing this reliably seemed annoying, so the fix is "just don't do this". It's not a hard freeze anyway.
2019-05-26 23:24:22 +00:00
int dir = mpctx->play_dir;
t[0] = opts->ab_loop[0];
t[1] = opts->ab_loop[1];
if (!opts->ab_loop_count)
return false;
player: modify/simplify AB-loop behavior This changes the behavior of the --ab-loop-a/b options. In addition, it makes it work with backward playback mode. The most obvious change is that the both the A and B point need to be set now before any looping happens. Unlike before, unset points don't implicitly use the start or end of the file. I think the old behavior was a feature that was explicitly added/wanted. Well, it's gone now. This is because of 2 reasons: 1. I never liked this feature, and it always got in my way (as user). 2. It's inherently annoying with backward playback mode. In backward playback mode, the user wants to set A/B in the wrong order. The ab-loop command will first set A, then B, so if you use this command during backward playback, A will be set to a higher timestamps than B. If you switch back to forward playback mode, the loop would stop working. I want the loop to just continue to work, and the chosen solution conflicts with the removed feature. The order issue above _could_ be fixed by also switching the AB-loop user option values around on direction switch. But there are no other instances of option changes magically affecting other options, and doing this would probably lead to unexpected misery (dying from corner cases and such). Another solution is sorting the A/B points by timestamps after copying them from the user options. Then A/B options set in backward mode will work in forward mode. This is the chosen solution. If you sort the points, you don't know anymore whether the unset point is supposed to signify the end or the start of the file. The AB-loop code is slightly better abstracted now, so it should be easy to restore the removed feature. It would still require coming up with a solution for backwards playback, though. A minor change is that if one point is set and the other is unset, I'm rendering both the chapter markers and the marker for the set point. Why? I don't know. My test file had chapters, and I guess I decided this looked better. This commit also fixes some subtle and obvious issues that I already forgot about when I wrote this commit message. It cleans up some minor code duplication and nonsense too. Regarding backward playback, the code uses an unsanitary mix of internal ("transformed") and user timestamps. So the play_dir variable appears more than usual. To mention one unfixed issue: if you set an AB-loop that is completely past the end of the file, it will get stuck in an infinite seeking loop once playback reaches the end of the file. Fixing this reliably seemed annoying, so the fix is "just don't do this". It's not a hard freeze anyway.
2019-05-26 23:24:22 +00:00
if (t[0] == MP_NOPTS_VALUE || t[1] == MP_NOPTS_VALUE || t[0] == t[1])
return false;
if (t[0] * dir > t[1] * dir)
MPSWAP(double, t[0], t[1]);
return true;
}
double get_track_seek_offset(struct MPContext *mpctx, struct track *track)
{
struct MPOpts *opts = mpctx->opts;
if (track->selected) {
if (track->type == STREAM_AUDIO)
return -opts->audio_delay;
if (track->type == STREAM_SUB)
{
for (int n = 0; n < num_ptracks[STREAM_SUB]; n++) {
if (mpctx->current_track[n][STREAM_SUB] == track)
return -opts->subs_shared->sub_delay[n];
}
}
}
return 0;
}
void issue_refresh_seek(struct MPContext *mpctx, enum seek_precision min_prec)
{
// let queued seeks execute at a slightly later point
if (mpctx->seek.type) {
mp_wakeup_core(mpctx);
return;
}
// repeat currently ongoing seeks
if (mpctx->current_seek.type) {
mpctx->seek = mpctx->current_seek;
mp_wakeup_core(mpctx);
return;
}
queue_seek(mpctx, MPSEEK_ABSOLUTE, get_current_time(mpctx), min_prec, 0);
}
void update_content_type(struct MPContext *mpctx, struct track *track)
{
enum mp_content_type content_type;
if (!track || !track->vo_c) {
content_type = MP_CONTENT_NONE;
} else if (track->image) {
content_type = MP_CONTENT_IMAGE;
} else {
content_type = MP_CONTENT_VIDEO;
}
if (mpctx->video_out)
vo_control(mpctx->video_out, VOCTRL_CONTENT_TYPE, &content_type);
}
void update_vo_playback_state(struct MPContext *mpctx)
{
if (mpctx->video_out && mpctx->video_out->config_ok) {
struct voctrl_playback_state oldstate = mpctx->vo_playback_state;
struct voctrl_playback_state newstate = {
.taskbar_progress = mpctx->opts->vo->taskbar_progress,
.playing = mpctx->playing,
.paused = mpctx->paused,
.percent_pos = get_percent_pos(mpctx),
};
if (oldstate.taskbar_progress != newstate.taskbar_progress ||
oldstate.playing != newstate.playing ||
oldstate.paused != newstate.paused ||
oldstate.percent_pos != newstate.percent_pos)
{
// Don't update progress bar if it was and still is hidden
if ((oldstate.playing && oldstate.taskbar_progress) ||
(newstate.playing && newstate.taskbar_progress))
{
vo_control_async(mpctx->video_out,
VOCTRL_UPDATE_PLAYBACK_STATE, &newstate);
}
mpctx->vo_playback_state = newstate;
}
} else {
mpctx->vo_playback_state = (struct voctrl_playback_state){ 0 };
}
}
void update_window_title(struct MPContext *mpctx, bool force)
{
if (!mpctx->video_out && !mpctx->ao) {
talloc_free(mpctx->last_window_title);
mpctx->last_window_title = NULL;
return;
}
char *title = mp_property_expand_string(mpctx, mpctx->opts->wintitle);
if (!mpctx->last_window_title || force ||
strcmp(title, mpctx->last_window_title) != 0)
{
talloc_free(mpctx->last_window_title);
mpctx->last_window_title = talloc_steal(mpctx, title);
video: move display and timing to a separate thread The VO is run inside its own thread. It also does most of video timing. The playloop hands the image data and a realtime timestamp to the VO, and the VO does the rest. In particular, this allows the playloop to do other things, instead of blocking for video redraw. But if anything accesses the VO during video timing, it will block. This also fixes vo_sdl.c event handling; but that is only a side-effect, since reimplementing the broken way would require more effort. Also drop --softsleep. In theory, this option helps if the kernel's sleeping mechanism is too inaccurate for video timing. In practice, I haven't ever encountered a situation where it helps, and it just burns CPU cycles. On the other hand it's probably actively harmful, because it prevents the libavcodec decoder threads from doing real work. Side note: Originally, I intended that multiple frames can be queued to the VO. But this is not done, due to problems with OSD and other certain features. OSD in particular is simply designed in a way that it can be neither timed nor copied, so you do have to render it into the video frame before you can draw the next frame. (Subtitles have no such restriction. sd_lavc was even updated to fix this.) It seems the right solution to queuing multiple VO frames is rendering on VO-backed framebuffers, like vo_vdpau.c does. This requires VO driver support, and is out of scope of this commit. As consequence, the VO has a queue size of 1. The existing video queue is just needed to compute frame duration, and will be moved out in the next commit.
2014-08-12 21:02:08 +00:00
if (mpctx->video_out)
vo_control(mpctx->video_out, VOCTRL_UPDATE_WINDOW_TITLE, title);
if (mpctx->ao) {
ao_control(mpctx->ao, AOCONTROL_UPDATE_STREAM_TITLE, title);
}
} else {
talloc_free(title);
}
}
void error_on_track(struct MPContext *mpctx, struct track *track)
{
if (!track || !track->selected)
return;
mp_deselect_track(mpctx, track);
if (track->type == STREAM_AUDIO)
MP_INFO(mpctx, "Audio: no audio\n");
if (track->type == STREAM_VIDEO)
MP_INFO(mpctx, "Video: no video\n");
if (mpctx->opts->stop_playback_on_init_failure ||
!(mpctx->vo_chain || mpctx->ao_chain))
{
if (!mpctx->stop_play)
mpctx->stop_play = PT_ERROR;
if (mpctx->error_playing >= 0)
mpctx->error_playing = MPV_ERROR_NOTHING_TO_PLAY;
}
mp_wakeup_core(mpctx);
}
int stream_dump(struct MPContext *mpctx, const char *source_filename)
{
struct MPOpts *opts = mpctx->opts;
stream, demux: redo origin policy thing mpv has a very weak and very annoying policy that determines whether a playlist should be used or not. For example, if you play a remote playlist, you usually don't want it to be able to read local filesystem entries. (Although for a media player the impact is small I guess.) It's weak and annoying as in that it does not prevent certain cases which could be interpreted as bad in some cases, such as allowing playlists on the local filesystem to reference remote URLs. It probably barely makes sense, but we just want to exclude some other "definitely not a good idea" things, all while playlists generally just work, so whatever. The policy is: - from the command line anything is played - local playlists can reference anything except "unsafe" streams ("unsafe" means special stream inputs like libavfilter graphs) - remote playlists can reference only remote URLs - things like "memory://" and archives are "transparent" to this This commit does... something. It replaces the weird stream flags with a slightly clearer "origin" value, which is now consequently passed down and used everywhere. It fixes some deviations from the described policy. I wanted to force archives to reference only content within them, but this would probably have been more complicated (or required different abstractions), and I'm too lazy to figure it out, so archives are now "transparent" (playlists within archives behave the same outside). There may be a lot of bugs in this. This is unfortunately a very noisy commit because: - every stream open call now needs to pass the origin - so does every demuxer open call (=> params param. gets mandatory) - most stream were changed to provide the "origin" value - the origin value needed to be passed along in a lot of places - I was too lazy to split the commit Fixes: #7274
2019-12-20 08:41:42 +00:00
stream_t *stream = stream_create(source_filename,
STREAM_ORIGIN_DIRECT | STREAM_READ,
mpctx->playback_abort, mpctx->global);
if (!stream)
return -1;
int64_t size = stream_get_size(stream);
FILE *dest = fopen(opts->stream_dump, "wb");
if (!dest) {
MP_ERR(mpctx, "Error opening dump file: %s\n", mp_strerror(errno));
return -1;
}
bool ok = true;
while (mpctx->stop_play == KEEP_PLAYING && ok) {
if (!opts->quiet && ((stream->pos / (1024 * 1024)) % 2) == 1) {
uint64_t pos = stream->pos;
player: redo terminal OSD and status line handling The terminal OSD code includes the handling of the terminal status line, showing player OSD messages on the terminal, and showing subtitles on terminal (the latter two only if there is no video window, or if terminal OSD is forced). This didn't handle some corner cases correctly. For example, showing an OSD message on the terminal always cleared the previous line, even if the line was an important message (or even just the command prompt, if most other messages were silenced). Attempt to handle this correctly by keeping track of how many lines the terminal OSD currently consists of. Since there could be race conditions with other messages being printed, implement this in msg.c. Now msg.c expects that MSGL_STATUS messages rewrite the status line, so the caller is forced to use a single mp_msg() call to set the status line. Instead of littering print_status() all over the place, update the status only once per playloop iteration in update_osd_msg(). In audio- only mode, the status line might now be a little bit off, but it's perhaps ok. Print the status line only if it has changed, or if another message was printed. This might help with extremely slow terminals, although in audio+video mode, it'll still be updated very often (A-V sync display changes on every frame). Instead of hardcoding the terminal sequences, use terminfo/termcap to get the sequences. Remove the --term-osd-esc option, which allowed to override the hardcoded escapes - it's useless now. The fallback for terminals with no escape sequences for moving the cursor and clearing a line is removed. This somewhat breaks status line display on these terminals, including the MS Windows console: instead of querying the terminal size and clearing the line manually by padding the output with spaces, the line is simply not cleared. I don't expect this to be a problem on UNIX, and on MS Windows we could emulate escape sequences. Note that terminal OSD (other than the status line) was broken anyway on these terminals. In osd.c, the function get_term_width() is not used anymore, so remove it. To remind us that the MS Windows console apparently adds a line break when writint the last column, adjust screen_width in terminal- win.c accordingly.
2014-01-13 19:05:41 +00:00
MP_MSG(mpctx, MSGL_STATUS, "Dumping %lld/%lld...",
(long long int)pos, (long long int)size);
}
uint8_t buf[4096];
int len = stream_read(stream, buf, sizeof(buf));
if (!len) {
ok &= stream->eof;
break;
}
ok &= fwrite(buf, len, 1, dest) == 1;
mp_wakeup_core(mpctx); // don't actually sleep
mp_idle(mpctx); // but process input
}
ok &= fclose(dest) == 0;
free_stream(stream);
return ok ? 0 : -1;
}
2013-11-19 21:36:33 +00:00
void merge_playlist_files(struct playlist *pl)
{
if (!pl->num_entries)
2013-11-19 21:36:33 +00:00
return;
char *edl = talloc_strdup(NULL, "edl://");
for (int n = 0; n < pl->num_entries; n++) {
struct playlist_entry *e = pl->entries[n];
if (n)
2013-11-19 21:36:33 +00:00
edl = talloc_strdup_append_buffer(edl, ";");
// Escape if needed
if (e->filename[strcspn(e->filename, "=%,;\n")] ||
bstr_strip(bstr0(e->filename)).len != strlen(e->filename))
{
// %length%
edl = talloc_asprintf_append_buffer(edl, "%%%zd%%", strlen(e->filename));
2013-11-19 21:36:33 +00:00
}
edl = talloc_strdup_append_buffer(edl, e->filename);
}
playlist_clear(pl);
playlist_add_file(pl, edl);
talloc_free(edl);
}
const char *mp_status_str(enum playback_status st)
{
switch (st) {
case STATUS_SYNCING: return "syncing";
case STATUS_READY: return "ready";
case STATUS_PLAYING: return "playing";
case STATUS_DRAINING: return "draining";
case STATUS_EOF: return "eof";
default: return "bug";
}
}