mpv/etc/input.conf

177 lines
5.7 KiB
Plaintext
Raw Normal View History

# mpv input control file
#
# You are able to redefine default keyboard/joystick/mouse/LIRC bindings, or
# add new ones here.
# See DOCS/man/en/input.rst for possible commands that can be bound.
# Also see mpv --input=cmdlist for other possible options.
# The file should be placed in the $HOME/.mpv directory.
#
# mpv --input=test --pause dummy.mkv can be used to test which commands keys are
# bound to.
#
# If you wish to unbind a key, use key ignore.
# e.g. ENTER ignore
#
# Note that merely removing default key bindings from this file won't remove
# the default bindings mpv was compiled with, unless
# --input=no-default-bindings
# is specified.
#
# Lines starting with # are comments. Use SHARP to assign the # key.
#
# Strings need to be quoted and escaped:
# KEY show_text "This is a single backslash: \\ and a quote: \" !"
#
# You can use modifier-key combinations like Shift+Left or Ctrl+Alt+x with
# modifiers Shift, Ctrl, Alt and Meta, but note that currently reading
# key combinations is only supported through the video windows of certain
# output drivers (not in output windows of other drivers or in a terminal).
MOUSE_BTN0_DBL cycle fullscreen # toggle fullscreen on/off
MOUSE_BTN2 cycle pause # toggle pause on/off
MOUSE_BTN3 seek 10
MOUSE_BTN4 seek -10
MOUSE_BTN5 add volume 1
MOUSE_BTN6 add volume -1
# Seek units are in seconds, but note that these are limited by keyframes
RIGHT seek 10
LEFT seek -10
UP seek 60
DOWN seek -60
# Do smaller, always exact (non-keyframe-limited), seeks with shift.
# Don't show them on the OSD (no-osd).
Shift+RIGHT no-osd seek 1 - exact
Shift+LEFT no-osd seek -1 - exact
Shift+UP no-osd seek 5 - exact
Shift+DOWN no-osd seek -5 - exact
PGUP seek 600
PGDWN seek -600
+ add audio-delay 0.100 # this changes audio/video sync
- add audio-delay -0.100
[ speed_mult 0.9091 # scale playback speed
] speed_mult 1.1
{ speed_mult 0.5
} speed_mult 2.0
BS set speed 1.0 # reset speed to normal
q quit
q {encode} quit
ESC quit
p cycle pause # toggle pause/playback mode
. frame_step # advance one frame and pause
SPACE cycle pause
mplayer: turn playtree into a list, and change per-file option handling Summary: - There is no playtree anymore. It's reduced to a simple list. - Options are now always global. You can still have per-file options, but these are optional and require special syntax. - The slave command pt_step has been removed, and playlist_next and playlist_prev added. (See etc/input.conf changes.) This is a user visible incompatible change, and will break slave-mode applications. - The pt_clear slave command is renamed to playlist_clear. - Playtree entries could have multiple files. This is not the case anymore, and playlist entries have always exactly one entry. Whenever something adds more than one file (like ASX playlists or dvd:// or dvdnav:// on the command line), all files are added as separate playlist entries. Note that some of the changes are quite deep and violent. Expect regressions. The playlist parsing code in particular is of low quality. I didn't try to improve it, and merely spent to least effort necessary to keep it somehow working. (Especially ASX playlist handling.) The playtree code was complicated and bloated. It was also barely used. Most users don't even know that mplayer manages the playlist as tree, or how to use it. The most obscure features was probably specifying a tree on command line (with '{' and '}' to create/close tree nodes). It filled the player code with complexity and confused users with weird slave commands like pt_up. Replace the playtree with a simple flat playlist. Playlist parsers that actually return trees are changed to append all files to the playlist pre-order. It used to be the responsibility of the playtree code to change per-file config options. Now this is done by the player core, and the playlist code is free of such details. Options are not per-file by default anymore. This was a very obscure and complicated feature that confused even experienced users. Consider the following command line: mplayer file1.mkv file2.mkv --no-audio file3.mkv This will disable the audio for file2.mkv only, because options are per-file by default. To make the option affect all files, you're supposed to put it before the first file. This is bad, because normally you don't need per-file options. They are very rarely needed, and the only reasonable use cases I can imagine are use of the encode backend (mplayer encode branch), or for debugging. The normal use case is made harder, and the feature is perceived as bug. Even worse, correct usage is hard to explain for users. Make all options global by default. The position of an option isn't significant anymore (except for options that compensate each other, consider --shuffle --no-shuffle). One other important change is that no options are reset anymore if a new file is started. If you change settings with slave mode commands, they will not be changed by playing a new file. (Exceptions include settings that are too file specific, like audio/subtitle stream selection.) There is still some need for per-file options. Debugging and encoding are use cases that profit from per-file options. Per-file profiles (as well as per-protocol and per-VO/AO options) need the implementation related mechanisms to backup and restore options when the playback file changes. Simplify the save-slot stuff, which is possible because there is no hierarchical play tree anymore. Now there's a simple backup field. Add a way to specify per-file options on command line. Example: mplayer f1.mkv -o0 --{ -o1 f2.mkv -o2 f3.mkv --} f4.mkv -o3 will have the following options per file set: f1.mkv, f4.mkv: -o0 -o3 f2.mkv, f3.mkv: -o0 -o3 -o1 -o2 The options --{ and --} start and end per-file options. All files inside the { } will be affected by the options equally (similar to how global options and multiple files are handled). When playback of a file starts, the per-file options are set according to the command line. When playback ends, the per-file options are restored to the values when playback started.
2012-07-31 19:33:26 +00:00
> playlist_next # skip to next file
ENTER playlist_next force # skip to next file or quit
mplayer: turn playtree into a list, and change per-file option handling Summary: - There is no playtree anymore. It's reduced to a simple list. - Options are now always global. You can still have per-file options, but these are optional and require special syntax. - The slave command pt_step has been removed, and playlist_next and playlist_prev added. (See etc/input.conf changes.) This is a user visible incompatible change, and will break slave-mode applications. - The pt_clear slave command is renamed to playlist_clear. - Playtree entries could have multiple files. This is not the case anymore, and playlist entries have always exactly one entry. Whenever something adds more than one file (like ASX playlists or dvd:// or dvdnav:// on the command line), all files are added as separate playlist entries. Note that some of the changes are quite deep and violent. Expect regressions. The playlist parsing code in particular is of low quality. I didn't try to improve it, and merely spent to least effort necessary to keep it somehow working. (Especially ASX playlist handling.) The playtree code was complicated and bloated. It was also barely used. Most users don't even know that mplayer manages the playlist as tree, or how to use it. The most obscure features was probably specifying a tree on command line (with '{' and '}' to create/close tree nodes). It filled the player code with complexity and confused users with weird slave commands like pt_up. Replace the playtree with a simple flat playlist. Playlist parsers that actually return trees are changed to append all files to the playlist pre-order. It used to be the responsibility of the playtree code to change per-file config options. Now this is done by the player core, and the playlist code is free of such details. Options are not per-file by default anymore. This was a very obscure and complicated feature that confused even experienced users. Consider the following command line: mplayer file1.mkv file2.mkv --no-audio file3.mkv This will disable the audio for file2.mkv only, because options are per-file by default. To make the option affect all files, you're supposed to put it before the first file. This is bad, because normally you don't need per-file options. They are very rarely needed, and the only reasonable use cases I can imagine are use of the encode backend (mplayer encode branch), or for debugging. The normal use case is made harder, and the feature is perceived as bug. Even worse, correct usage is hard to explain for users. Make all options global by default. The position of an option isn't significant anymore (except for options that compensate each other, consider --shuffle --no-shuffle). One other important change is that no options are reset anymore if a new file is started. If you change settings with slave mode commands, they will not be changed by playing a new file. (Exceptions include settings that are too file specific, like audio/subtitle stream selection.) There is still some need for per-file options. Debugging and encoding are use cases that profit from per-file options. Per-file profiles (as well as per-protocol and per-VO/AO options) need the implementation related mechanisms to backup and restore options when the playback file changes. Simplify the save-slot stuff, which is possible because there is no hierarchical play tree anymore. Now there's a simple backup field. Add a way to specify per-file options on command line. Example: mplayer f1.mkv -o0 --{ -o1 f2.mkv -o2 f3.mkv --} f4.mkv -o3 will have the following options per file set: f1.mkv, f4.mkv: -o0 -o3 f2.mkv, f3.mkv: -o0 -o3 -o1 -o2 The options --{ and --} start and end per-file options. All files inside the { } will be affected by the options equally (similar to how global options and multiple files are handled). When playback of a file starts, the per-file options are set according to the command line. When playback ends, the per-file options are restored to the values when playback started.
2012-07-31 19:33:26 +00:00
< playlist_prev # skip to previous file
o osd # cycle through OSD mode
I show_text "${filename}" # display filename in osd
P show_progress
z add sub-delay -0.1 # subtract 100 ms delay from subs
x add sub-delay +0.1 # add
g sub_step -1 # immediately display next subtitle
y sub_step +1 # previous
9 add volume -1
/ add volume -1
0 add volume 1
* add volume 1
( add balance -0.1 # adjust audio balance in favor of left
) add balance 0.1 # right
m cycle mute
1 add contrast -1
2 add contrast 1
3 add brightness -1
4 add brightness 1
5 add hue -1
6 add hue 1
7 add saturation -1
8 add saturation 1
d cycle framedrop # cycle through framedrop modes
# toggle deinterlacer; requires either vdpau output, -vf yadif or kerndeint
D cycle deinterlace
c cycle colormatrix
# Next 3 currently only work with --no-ass
r add sub-pos -1 # move subtitles up
t add sub-pos +1 # down
v cycle sub-visibility
# stretch SSA/ASS subtitles with anamorphic videos to match historical
V cycle ass-vsfilter-aspect-compat
j cycle sub # cycle through subtitles
J cycle sub down # ...backwards
F cycle sub-forced-only
SHARP cycle audio # switch audio streams
_ cycle video
TAB cycle program
i edl_mark # for use with --edlout mode
T cycle ontop # toggle video window ontop of other windows
f cycle fullscreen # toggle fullscreen
s screenshot # take a png screenshot
S screenshot each-frame # ...on every frame
Alt+s screenshot - window # take a screenshot of window contents
Alt+S screenshot each-frame window # ...on every frame
w add panscan -0.1 # zoom out with -panscan 0 -fs
e add panscan +0.1 # in
POWER quit
MENU cycle osd
PLAY cycle pause
PAUSE cycle pause
PLAYPAUSE cycle pause
STOP quit
FORWARD seek 60
REWIND seek -60
mplayer: turn playtree into a list, and change per-file option handling Summary: - There is no playtree anymore. It's reduced to a simple list. - Options are now always global. You can still have per-file options, but these are optional and require special syntax. - The slave command pt_step has been removed, and playlist_next and playlist_prev added. (See etc/input.conf changes.) This is a user visible incompatible change, and will break slave-mode applications. - The pt_clear slave command is renamed to playlist_clear. - Playtree entries could have multiple files. This is not the case anymore, and playlist entries have always exactly one entry. Whenever something adds more than one file (like ASX playlists or dvd:// or dvdnav:// on the command line), all files are added as separate playlist entries. Note that some of the changes are quite deep and violent. Expect regressions. The playlist parsing code in particular is of low quality. I didn't try to improve it, and merely spent to least effort necessary to keep it somehow working. (Especially ASX playlist handling.) The playtree code was complicated and bloated. It was also barely used. Most users don't even know that mplayer manages the playlist as tree, or how to use it. The most obscure features was probably specifying a tree on command line (with '{' and '}' to create/close tree nodes). It filled the player code with complexity and confused users with weird slave commands like pt_up. Replace the playtree with a simple flat playlist. Playlist parsers that actually return trees are changed to append all files to the playlist pre-order. It used to be the responsibility of the playtree code to change per-file config options. Now this is done by the player core, and the playlist code is free of such details. Options are not per-file by default anymore. This was a very obscure and complicated feature that confused even experienced users. Consider the following command line: mplayer file1.mkv file2.mkv --no-audio file3.mkv This will disable the audio for file2.mkv only, because options are per-file by default. To make the option affect all files, you're supposed to put it before the first file. This is bad, because normally you don't need per-file options. They are very rarely needed, and the only reasonable use cases I can imagine are use of the encode backend (mplayer encode branch), or for debugging. The normal use case is made harder, and the feature is perceived as bug. Even worse, correct usage is hard to explain for users. Make all options global by default. The position of an option isn't significant anymore (except for options that compensate each other, consider --shuffle --no-shuffle). One other important change is that no options are reset anymore if a new file is started. If you change settings with slave mode commands, they will not be changed by playing a new file. (Exceptions include settings that are too file specific, like audio/subtitle stream selection.) There is still some need for per-file options. Debugging and encoding are use cases that profit from per-file options. Per-file profiles (as well as per-protocol and per-VO/AO options) need the implementation related mechanisms to backup and restore options when the playback file changes. Simplify the save-slot stuff, which is possible because there is no hierarchical play tree anymore. Now there's a simple backup field. Add a way to specify per-file options on command line. Example: mplayer f1.mkv -o0 --{ -o1 f2.mkv -o2 f3.mkv --} f4.mkv -o3 will have the following options per file set: f1.mkv, f4.mkv: -o0 -o3 f2.mkv, f3.mkv: -o0 -o3 -o1 -o2 The options --{ and --} start and end per-file options. All files inside the { } will be affected by the options equally (similar to how global options and multiple files are handled). When playback of a file starts, the per-file options are set according to the command line. When playback ends, the per-file options are restored to the values when playback started.
2012-07-31 19:33:26 +00:00
NEXT playlist_next
PREV playlist_prev
VOLUME_UP add volume 1
VOLUME_DOWN add volume -1
MUTE cycle mute
CLOSE_WIN quit
CLOSE_WIN {encode} quit
! add chapter -1 # skip to previous chapter
@ add chapter 1 # next
E cycle edition # next edition
A cycle angle
U stop
# TV
h tv_step_channel 1
k tv_step_channel -1
n tv_step_norm
u tv_step_chanlist
#
# Apple Remote section
#
AR_PLAY cycle pause
AR_PLAY_HOLD quit
AR_NEXT seek 30
AR_NEXT_HOLD seek 120
AR_PREV seek -10
AR_PREV_HOLD seek -120
AR_MENU cycle osd
AR_MENU_HOLD cycle mute
AR_VUP add volume 1
AR_VDOWN add volume -1
#
# Joystick section
# WARNING: joystick support has to be explicitly enabled at
# compiletime with --enable-joystick
#
JOY_AXIS0_PLUS seek 10
JOY_AXIS0_MINUS seek -10
JOY_AXIS1_MINUS seek 60
JOY_AXIS1_PLUS seek -60
JOY_BTN0 cycle pause
JOY_BTN1 cycle osd
JOY_BTN2 add volume 1
JOY_BTN3 add volume -1
#
# Not assigned by default
# (not an exhaustive list of unbound commands)
#
#? add sub-scale +0.1 # increase subtitle font size
#? add sub-scale -0.1 # decrease subtitle font size