RepoMirrors/mpv
1
0
Fork 0
mirror of https://github.com/mpv-player/mpv synced 2024-12-26 00:42:57 +00:00
Code Issues Releases Wiki Activity
b5f620ae75
mpv/options/options.h

331 lines
7.5 KiB
C
Raw Normal View History

Start of new option system First part of option restructuring. The aim is to move option values from a huge number of separate globals to a single non-global struct. This part adds some support for parsing option values into such struct instances, and moves one example option (fixed-vo) to the struct.
2008-03-31 03:19:29 +00:00
#ifndef MPLAYER_OPTIONS_H
#define MPLAYER_OPTIONS_H
vo: remove and cleanup globals Removes almost every global variabel in vo.h and puts them in a special struct in MPOpts for video output related options. Also we completly remove the options/globals pts and refresh rate because they were unused.
2013-03-04 16:40:21 +00:00
#include <stdbool.h>
core: remove a number of global variables Move them into per-instance structs. This should get rid of all global variables in mplayer.c (not counting those referenced by cfg-mplayer.h). In core/input/ar.c, just remove checking the slave_mode variable. I'm not sure what this code was supposed to achieve, but slave mode is broken, slave mode is actually infeasible on OSX (ar.c is completely OSX specific), and the correct way of doing this would be to disable this input device per command line switch.
2013-03-08 01:08:02 +00:00
#include <stdint.h>
Move options/config related files from mpvcore/ to options/ Since m_option.h and options.h are extremely often included, a lot of files have to be changed. Moving path.c/h to options/ is a bit questionable, but since this is mainly about access to config files (which are also handled in options/), it's probably ok.
2013-12-17 01:02:25 +00:00
#include "m_option.h"
player: use an array for stream ID options and such This makes the code slightly more generic.
2015-05-22 19:00:24 +00:00
#include "common/common.h"
options: rename -ss and -endpos, allow relative times Rename the -ss option to -start, and -endpos to -length. Add a -end option. The -end option always specifies an absolute end time, as opposed to -endpos/-length. All these options (--start, --end, --length) now accept relative times. Percent positions (e.g. "--start=30%") are interpreted as fractions of the file duration. Negative times (e.g. "--start=-1:00) are interpreted relative to the end of the file. Chapters (e.g. "--start=#3") yield the chapter's time position. The chapter support might be able to replace --chapter completely, but for now I am not sure how well this works out with e.g. DVDs and BDs, and a separate --chapter option is useful interface-wise.
2012-11-15 17:49:17 +00:00
vo: Separate vo options from MPOpts Separate the video output options from the big MPOpts structure and also only pass the new mp_vo_opts structure to the vo backend. Move video_driver_list into mp_vo_opts
2013-03-04 21:41:27 +00:00
typedef struct mp_vo_opts {
options: add options that set defaults for af/vf/ao/vo There are some use cases for this. For example, you can use it to set defaults of automatically inserted filters (like af_lavrresample). It's also useful if you have a non-trivial VO configuration, and want to use --vo to quickly change between the drivers without repeating the whole configuration in the --vo argument.
2013-11-30 23:12:10 +00:00
struct m_obj_settings *video_driver_list, *vo_defs;
vo: Separate vo options from MPOpts Separate the video output options from the big MPOpts structure and also only pass the new mp_vo_opts structure to the vo backend. Move video_driver_list into mp_vo_opts
2013-03-04 21:41:27 +00:00
int ontop;
video: remove fullscreen flags chaos There was a MPOpts fullscreen field, a mp_vo_opts.fs field, and VOFLAG_FULLSCREEN. Remove all these and introduce a mp_vo_opts.fullscreen flag instead. When VOs receive VOCTRL_FULLSCREEN, they are supposed to set the current fullscreen mode to the state in mp_vo_opts.fullscreen. They also should do this implicitly on config(). VOs which are capable of doing so can update the mp_vo_opts.fullscreen if the actual fullscreen mode changes (e.g. if the user uses the window manager controls). If fullscreen mode switching fails, they can also set mp_vo_opts.fullscreen to the actual state. Note that the X11 backend does almost none of this, and it has a private fs flag to store the fullscreen flag, instead of getting it from the WM. (Possibly because it has to deal with broken WMs.) The fullscreen option has to be checked on config() to deal with the -fs option, especially with something like: mpv --fs file1.mkv --{ --no-fs file2.mkv --} (It should start in fullscreen mode, but go to windowed mode when playing file2.mkv.) Wayland changes by: Alexander Preisinger <alexander.preisinger@gmail.com> Cocoa changes by: Stefano Pigozzi <stefano.pigozzi@gmail.com>
2013-07-18 12:05:39 +00:00
int fullscreen;
x11: add --on-all-workspaces option and property Fixes #1469.
2015-01-16 22:38:47 +00:00
int border;
int all_workspaces;
vo: Separate vo options from MPOpts Separate the video output options from the big MPOpts structure and also only pass the new mp_vo_opts structure to the vo backend. Move video_driver_list into mp_vo_opts
2013-03-04 21:41:27 +00:00
int screen_id;
int fsscreen_id;
cocoa: allow to black out other display when going fs fixes #1302
2014-12-01 17:05:30 +00:00
int fs_black_out_screens;
vo: Separate vo options from MPOpts Separate the video output options from the big MPOpts structure and also only pass the new mp_vo_opts structure to the vo backend. Move video_driver_list into mp_vo_opts
2013-03-04 21:41:27 +00:00
char *winname;
x11: replace--[x11-]fstype option with --x11-netwm Simplifies the code a lot. You can still use --x11-netwm=no to disable NetWM for whatever reasons.
2014-05-15 22:47:13 +00:00
int x11_netwm;
x11: request bypassing compositor Maybe this is a good idea. Also add an option to disable it again, for the sake of testing. Fixes #2502.
2015-11-18 20:37:38 +00:00
int x11_bypass_compositor;
x11: use mpv internal key auto-repeat handling if possible Block X11's native key repeat, and use mpv's key repeat handling in input.c instead. No configure check for XKB. Even though it's an extension, it has been part of most (all?) xlibs since 1996. If XKB appears to be missing, just refuse enabling x11. This is a potentially controversial change. mpv will use its own key repeat rate, instead of X11's. This should be better, because seeking will have a standardized "speed" (seek events per seconds when keeping a seek key held down). It will also allow disabling key repears for certain commands, though this is not done anywhere yet. The new behavior can be disabled with the --native-keyrepeat option.
2013-04-03 23:13:56 +00:00
int native_keyrepeat;
vo: Separate vo options from MPOpts Separate the video output options from the big MPOpts structure and also only pass the new mp_vo_opts structure to the vo backend. Move video_driver_list into mp_vo_opts
2013-03-04 21:41:27 +00:00
float panscan;
video: make it possible to scale/pan the video by arbitrary amounts Add --video-align-x/y, --video-pan-x/y, --video-scale options and properties. See the additions to the manpage for description and semantics. These transformations are intentionally done on top of panscan. Unlike the (now removed) --panscanrange option, this doesn't affect the default panscan behavior. (Although panscan itself becomes kind of useless if the new options are used.)
2013-06-14 22:15:32 +00:00
float zoom;
float pan_x, pan_y;
float align_x, align_y;
video: add unscaled mode with --video-unscaled
2013-09-01 01:27:03 +00:00
int unscaled;
vo: Separate vo options from MPOpts Separate the video output options from the big MPOpts structure and also only pass the new mp_vo_opts structure to the vo backend. Move video_driver_list into mp_vo_opts
2013-03-04 21:41:27 +00:00
struct m_geometry geometry;
struct m_geometry autofit;
struct m_geometry autofit_larger;
player: add --autofit-smaller option Fixes #1472. (Maybe these options should have been named --autofit-max and --autofit-min, but since --autofit-larger already exists, use --autofit-smaller for symmetry.)
2015-01-16 21:30:32 +00:00
struct m_geometry autofit_smaller;
player: add --window-scale option Requested. Works similar to the property with the same name.
2015-04-24 20:52:01 +00:00
float window_scale;
vo: Separate vo options from MPOpts Separate the video output options from the big MPOpts structure and also only pass the new mp_vo_opts structure to the vo backend. Move video_driver_list into mp_vo_opts
2013-03-04 21:41:27 +00:00
int keepaspect;
options: add --no-keepaspect-window Seems silly, but was requested.
2014-10-04 20:17:36 +00:00
int keepaspect_window;
vo: Separate vo options from MPOpts Separate the video output options from the big MPOpts structure and also only pass the new mp_vo_opts structure to the vo backend. Move video_driver_list into mp_vo_opts
2013-03-04 21:41:27 +00:00
int64_t WinID;
float force_monitor_aspect;
float monitor_pixel_aspect;
int force_window_position;
cocoa_common: add native OSX fullscreen support This adds Mission Control fullscreen functionality to mpv. Since this doesn't play well with many of mpv's features disable it by default. Users can activate this feature by using `--native-fs` when starting mpv. Fixes #34
2013-05-10 22:22:23 +00:00
win32: add option to set VO MMCSS profile This was requested.
2015-12-06 18:20:23 +00:00
char *mmcss_profile;
vo_opengl_cb, vo_opengl: add option for preloading hwdec context See manpage additions. This is mainly useful for vo_opengl_cb, but can also be applied to vo_opengl. On a side note, gl_hwdec_load_api() should stop using a name string, and instead always use the IDs. This should be cleaned up another time.
2015-07-07 12:53:58 +00:00
// vo_wayland, vo_drm
options: remove global variables for swscale options; rename them Additionally to removing the global variables, this makes the options more uniform. --ssf-... becomes --sws-..., and --sws becomes --sws- scaler. For --sws-scaler, use choices instead of magic integer values.
2014-06-10 20:41:14 +00:00
struct sws_opts *sws_opts;
vo_opengl_cb, vo_opengl: add option for preloading hwdec context See manpage additions. This is mainly useful for vo_opengl_cb, but can also be applied to vo_opengl. On a side note, gl_hwdec_load_api() should stop using a name string, and instead always use the IDs. This should be cleaned up another time.
2015-07-07 12:53:58 +00:00
// vo_opengl, vo_opengl_cb
int hwdec_preload_api;
vo: Separate vo options from MPOpts Separate the video output options from the big MPOpts structure and also only pass the new mp_vo_opts structure to the vo backend. Move video_driver_list into mp_vo_opts
2013-03-04 21:41:27 +00:00
} mp_vo_opts;
cache: redo options and default settings Some options change from percentages to number of kilobytes; there are no cache options using percentages anymore. Raise the default values. The cache is now 25000 kilobytes, although if your connection is slow enough, the maximum is probably never reached. (Although all the memory will still be used as seekback-cache.) Remove the separate --audio-file-cache option, and use the cache default settings for it.
2014-05-19 21:27:09 +00:00
struct mp_cache_opts {
int size;
int def_size;
int initial;
int seek_min;
cache: make backbuffer size configurable Allow setting an arbitrary amount, instead of the fixed 50%. This is nto striclty backwards compatible. The defaults don't change, but the --cache/--cache-default options now set the readahead portion. So in practice, users who configured this until now will see the double amount of cache being used, _plus_ the 75MB default backbuffer will be in use.
2015-07-22 21:38:45 +00:00
int back_buffer;
stream: add a file cache For remarks, pretty much see the manpage additions. Could help with network streams that require too much seeking (maybe), or might be extended to help with the use case of watching and downloading a file at the same time. In general, it might be a useless feature and could be removed again.
2014-06-22 00:50:52 +00:00
char *file;
int file_max;
cache: redo options and default settings Some options change from percentages to number of kilobytes; there are no cache options using percentages anymore. Raise the default values. The cache is now 25000 kilobytes, although if your connection is slow enough, the maximum is probably never reached. (Although all the memory will still be used as seekback-cache.) Remove the separate --audio-file-cache option, and use the cache default settings for it.
2014-05-19 21:27:09 +00:00
};
vo: Separate vo options from MPOpts Separate the video output options from the big MPOpts structure and also only pass the new mp_vo_opts structure to the vo backend. Move video_driver_list into mp_vo_opts
2013-03-04 21:41:27 +00:00
typedef struct MPOpts {
options: add --no-terminal switch Mostly useful for internal reasons. This code will be enabled by default if mpv is started via the client API.
2014-02-06 15:49:50 +00:00
int use_terminal;
player: add a --dump-stats option This collects statistics and other things. The option dumps raw data into a file. A script to visualize this data is included too. Litter some of the player code with calls that generate these statistics. In general, this will be helpful to debug timing dependent issues, such as A/V sync problems. Normally, one could argue that this is the task of a real profiler, but then we'd have a hard time to include extra information like audio/video PTS differences. We could also just hardcode all statistics collection and processing in the player code, but then we'd end up with something like mplayer's status line, which was cluttered and required a centralized approach (i.e. getting the data to the status line; so it was all in mplayer.c). Some players can visualize such statistics on OSD, but that sounds even more complicated. So the approach added with this commit sounds sensible. The stats-conv.py script is rather primitive at the moment and its output is semi-ugly. It uses matplotlib, so it could probably be extended to do a lot, so it's not a dead-end.
2014-04-17 19:47:00 +00:00
char *dump_stats;
msg: remove global state
2013-12-21 22:11:12 +00:00
int verbose;
options: change --msg-level option Make it accept "," as separator, instead of only ":". Do this by using the key-value-list parser. Before this, the option was stored as a string, with the option parser verifying that the option value as correct. Now it's stored pre-parsed, although the log levels still require separate verification and parsing-on-use to some degree (which is why the msg-level option type doesn't go away). Because the internal type changes, the client API "native" type also changes. This could be prevented with some more effort, but I don't think it's worth it - if MPV_FORMAT_STRING is used, it still works the same, just with a different separator on read accesses.
2015-02-06 15:48:52 +00:00
char **msg_levels;
msg: remove global state
2013-12-21 22:11:12 +00:00
int msg_color;
int msg_module;
msg: add --msgtime option to add timestamps to each output message Will be helpful to track down strange wait times and such issues, as well when you have develop something timing related. (Then you may print timestamps in your debug output, and the --msgtime timestamps will help giving context.)
2014-02-28 21:45:34 +00:00
int msg_time;
msg: add --log-file option This allows getting the log at all with --no-terminal and without having to retrieve log messages manually with the client API. The log level is hardcoded to -v. A higher log level would lead to too much log output (huge file sizes and latency issues due to waiting on the disk), and isn't too useful in general anyway. For debugging, the terminal can be used instead.
2015-01-26 10:31:02 +00:00
char *log_file;
msg: change --msglevel, reduce legacy glue Basically, reimplement --msglevel. Instead of making the new msg code use the legacy code, make the legacy code use the reimplemented functionality. The handling of the deprecated --identify switch changes. It temporarily stops working; this will be fixed in later commits. The actual sub-options syntax (like --msglevel-vo=...) goes away, but I bet nobody knew about this or used this anyway.
2013-12-18 18:04:30 +00:00
core: add --reset-on-next-file option This option can be used to selectively reset settings when playing the next file in the playlist (i.e. restore mplayer and mplayer2 behavior). Might remove this option again should it turn out that nobody uses it.
2013-04-10 19:06:00 +00:00
char **reset_options;
options: deprecate 'lua' based options/dirs for 'script' - --lua and --lua-opts change to --script and --script-opts - 'lua' default script dirs change to 'scripts' - DOCS updated - 'lua-settings' dir was _not_ modified The old lua-based names/dirs still work, but display a warning. Signed-off-by: wm4 <wm4@nowhere>
2014-12-14 23:31:30 +00:00
char **script_files;
char **script_opts;
Add the on-screen-controller Signed-off-by: wm4 <wm4@nowhere>
2013-09-25 22:56:41 +00:00
int lua_load_osc;
player: integrate ytdl_hook.lua
2014-11-19 17:51:53 +00:00
int lua_load_ytdl;
options: add --ytdl-format option for youtube-dl format It's passed with the '--format' option to youtube-dl. If it isn't set, we don't pass '--format best' so that youtube-dl can use the options from its configuration file. Signed-off-by: wm4 <wm4@nowhere>
2014-11-19 22:33:28 +00:00
char *lua_ytdl_format;
ytdl: add "--ytdl-params" option This option allows the user to pass non-supported options directly to youtube-dl, such as "--proxy URL", "--username USERNAME" and '--password PASSWORD". There is no sanity checking so it's possible to break things (i.e. if you pass "--version" mpv exits with random JSON error). Signed-off-by: wm4 <wm4@nowhere>
2015-02-22 20:32:42 +00:00
char **lua_ytdl_raw_options;
options: add --ytdl-format option for youtube-dl format It's passed with the '--format' option to youtube-dl. If it isn't set, we don't pass '--format best' so that youtube-dl can use the options from its configuration file. Signed-off-by: wm4 <wm4@nowhere>
2014-11-19 22:33:28 +00:00
lua: add option to disable auto-loading of lua scripts
2014-02-28 21:25:48 +00:00
int auto_load_scripts;
core: add --reset-on-next-file option This option can be used to selectively reset settings when playing the next file in the playlist (i.e. restore mplayer and mplayer2 behavior). Might remove this option again should it turn out that nobody uses it.
2013-04-10 19:06:00 +00:00
options: add options that set defaults for af/vf/ao/vo There are some use cases for this. For example, you can use it to set defaults of automatically inserted filters (like af_lavrresample). It's also useful if you have a non-trivial VO configuration, and want to use --vo to quickly change between the drivers without repeating the whole configuration in the --vo argument.
2013-11-30 23:12:10 +00:00
struct m_obj_settings *audio_driver_list, *ao_defs;
audio: add device selection & listing with --audio-device Not sure how good of an idea this is. This commit doesn't add support for this to any AO yet; the AO implementations will follow later.
2014-10-09 19:21:31 +00:00
char *audio_device;
audio: add --audio-client-name option The main need I see for this is with libmpv - it would be confusing if some application showed up as "mpv" on whateverthehell PulseAudio uses it for (generally it does show up on various PA GUI tools).
2014-11-07 14:54:35 +00:00
char *audio_client_name;
audio: add option for falling back to ao_null The manpage entry explains this. (Maybe this option could be always enabled and removed. I don't quite remember what valid use-cases there are for just disabling audio entirely, other than that this is also needed for audio decoder init failure.)
2015-10-05 16:53:02 +00:00
int ao_null_fallback;
core: add --force-window This commit adds the --force-window option, which will cause mpv always to create a window when started. This can be useful when pretending that mpv is a GUI application (which it isn't, but users pretend anyway), and playing audio files would run mpv in the background without giving a window to control it. This doesn't actually create the window immediately: it only does so only after initializing playback and when it is clear that there won't be any actual video. This could be a problem when starting slow or completely stuck network streams (mpv would remain frozen in the background), or if video initialization somehow is stuck forever in an in-between state (like when the decoder doesn't output a video frame, but doesn't return an error either). Well, we can pretend only so much that mpv is a GUI application.
2013-10-01 23:15:59 +00:00
int force_vo;
options: move mixer.h options to struct
2012-01-21 07:28:07 +00:00
int softvol;
options: add --mute for setting initial audio mute status Similar to --volume. Takes this as opportunity to move the variable corresponding to --volume into MPOpts.
2012-11-15 18:22:01 +00:00
float mixer_init_volume;
int mixer_init_mute;
mixer: restore volume with playback resume Note that this is intentionally never done if the AO or softvolume is different, or if the current volume control method is thought to control system wide volume (such as ALSA) or otherwise user controllable (such as PulseAudio). The intention is to keep things robust and to avoid messing with the user's audio settings as far as possible, while still providing the ability to resume volume if it makes sense.
2013-09-19 12:32:47 +00:00
char *mixer_restore_volume_data;
options: move mixer.h options to struct
2012-01-21 07:28:07 +00:00
float softvol_max;
audio: add -gapless-audio option If the option is enabled and all audio has been buffered to the AO, then the player will move to the next file without waiting for the buffered audio to drain, while leaving the AO initialized. If the playback of the next file starts quickly enough (before the AO buffer empties) then it should continue writing audio to the same AO with no gap in between.
2010-11-12 12:06:37 +00:00
int gapless_audio;
audio: make buffer size configurable Really only for testing.
2014-09-04 21:48:27 +00:00
double audio_buffer;
vo: remove and cleanup globals Removes almost every global variabel in vo.h and puts them in a special struct in MPOpts for video output related options. Also we completly remove the options/globals pts and refresh rate because they were unused.
2013-03-04 16:40:21 +00:00
vo: Separate vo options from MPOpts Separate the video output options from the big MPOpts structure and also only pass the new mp_vo_opts structure to the vo backend. Move video_driver_list into mp_vo_opts
2013-03-04 21:41:27 +00:00
mp_vo_opts vo;
input: allow disabling window dragging with --no-window-dragging Requested in github issue #608.
2014-05-20 00:40:00 +00:00
int allow_win_drag;
vo: remove and cleanup globals Removes almost every global variabel in vo.h and puts them in a special struct in MPOpts for video output related options. Also we completly remove the options/globals pts and refresh rate because they were unused.
2013-03-04 16:40:21 +00:00
char *wintitle;
player: add --media-title option Requested by ChrisK2.
2014-09-02 20:28:11 +00:00
char *media_title;
vo: remove and cleanup globals Removes almost every global variabel in vo.h and puts them in a special struct in MPOpts for video output related options. Also we completly remove the options/globals pts and refresh rate because they were unused.
2013-03-04 16:40:21 +00:00
int force_rgba_osd;
// ranges -100 - 100, 1000 if the vo default should be used
int gamma_gamma;
int gamma_brightness;
int gamma_contrast;
int gamma_saturation;
int gamma_hue;
video: replace vf_format outputlevels option with global option The vf_format suboption is replaced with --video-output-levels (a global option and property). In particular, the parameter is removed from mp_image_params. The mechanism is moved to the "video equalizer", which also handles common video output customization like brightness and contrast controls. The new code is slightly cleaner, and the top-level option is slightly more user-friendly than as vf_format sub-option.
2015-09-29 19:12:26 +00:00
int video_output_levels;
vo: remove and cleanup globals Removes almost every global variabel in vo.h and puts them in a special struct in MPOpts for video output related options. Also we completly remove the options/globals pts and refresh rate because they were unused.
2013-03-04 16:40:21 +00:00
x11: enable screensaver when paused, rename/change --stop-xscreensaver Use the recently introduced screensaver VOCTRLs to control the screensaver in the X11 backend. This means the behavior when paused changes: the old code always kept the screensaver disabled, but now the screensaver is reenabled on pausing. Rename the --stop-xscreensaver option to --stop-screensaver and make it more generic. Now it affects all backends that respond to the screensaver VOCTRLs.
2013-06-13 22:24:41 +00:00
int stop_screensaver;
options: cosmetics: move cursor_autohide_delay definition No functional changes.
2013-09-08 00:07:20 +00:00
int cursor_autohide_delay;
mplayer: add --cursor-autohide-fs-only option This option makes the cursor always visible in windowed mode. Apparently, this is what (some?) Windows and OSX users expect. It's disabled by default for now. Restructure the cursor hide logic a bit for this purpose.
2013-09-08 00:46:19 +00:00
int cursor_autohide_fs;
options: cosmetics: move cursor_autohide_delay definition No functional changes.
2013-09-08 00:07:20 +00:00
video: add --video-rotate option for controlling auto-rotation
2014-05-24 12:08:39 +00:00
int video_rotate;
video: initial Matroska 3D support This inserts an automatic conversion filter if a Matroska file is marked as 3D (StereoMode element). The basic idea is similar to video rotation and colorspace handling: the 3D mode is added as a property to the video params. Depending on this property, a video filter can be inserted. As of this commit, extending mp_image_params is actually completely unnecessary - but the idea is that it will make it easier to integrate with VOs supporting stereo 3D mogrification. Although vo_opengl does support some stereo rendering, it didn't support the mode my sample file used, so I'll leave that part for later. Not that most mappings from Matroska mode to vf_stereo3d mode are probably wrong, and some are missing. Assuming that Matroska modes, and vf_stereo3d in modes, and out modes are all the same might be an oversimplification - we'll see. See issue #1045.
2014-08-30 21:24:46 +00:00
int video_stereo_mode;
video: add --video-rotate option for controlling auto-rotation
2014-05-24 12:08:39 +00:00
core: redo how codecs are mapped, remove codecs.conf Use codec names instead of FourCCs to identify codecs. Rewrite how codecs are selected and initialized. Now each decoder exports a list of decoders (and the codec it supports) via add_decoders(). The order matters, and the first decoder for a given decoder is preferred over the other decoders. E.g. all ad_mpg123 decoders are preferred over ad_lavc, because it comes first in the mpcodecs_ad_drivers array. Likewise, decoders within ad_lavc that are enumerated first by libavcodec (using av_codec_next()) are preferred. (This is actually critical to select h264 software decoding by default instead of vdpau. libavcodec and ffmpeg/avconv use the same method to select decoders by default, so we hope this is sane.) The codec names follow libavcodec's codec names as defined by AVCodecDescriptor.name (see libavcodec/codec_desc.c). Some decoders have names different from the canonical codec name. The AVCodecDescriptor API is relatively new, so we need a compatibility layer for older libavcodec versions for codec names that are referenced internally, and which are different from the decoder name. (Add a configure check for that, because checking versions is getting way too messy.) demux/codec_tags.c is generated from the former codecs.conf (minus "special" decoders like vdpau, and excluding the mappings that are the same as the mappings libavformat's exported RIFF tables). It contains all the mappings from FourCCs to codec name. This is needed for demux_mkv, demux_mpg, demux_avi and demux_asf. demux_lavf will set the codec as determined by libavformat, while the other demuxers have to do this on their own, using the mp_set_audio/video_codec_from_tag() functions. Note that the sh_audio/video->format members don't uniquely identify the codec anymore, and sh->codec takes over this role. Replace the --ac/--vc/--afm/--vfm with new --vd/--ad options, which provide cover the functionality of the removed switched. Note: there's no CODECS_FLAG_FLIP flag anymore. This means some obscure container/video combinations (e.g. the sample Film_200_zygo_pro.mov) are played flipped. ffplay/avplay doesn't handle this properly either, so we don't care and blame ffmeg/libav instead.
2013-02-09 14:15:19 +00:00
char *audio_decoders;
char *video_decoders;
audio: add --audio-spdif as new method for enabling passthrough This provides a new method for enabling spdif passthrough. The old method via --ad (--ad=spdif:ac3 etc.) is deprecated. The deprecated method will probably stop working at some point. This also supports PCM fallback. One caveat is that it will lose at least 1 audio packet in doing so. (I don't care enough to prevent this.) (This is named after the old S/PDIF connector, because it uses the same underlying technology as far as the higher level protoco is concerned. Also, the user should be renamed that passthrough is backwards.)
2015-06-05 20:35:43 +00:00
char *audio_spdif;
core: redo how codecs are mapped, remove codecs.conf Use codec names instead of FourCCs to identify codecs. Rewrite how codecs are selected and initialized. Now each decoder exports a list of decoders (and the codec it supports) via add_decoders(). The order matters, and the first decoder for a given decoder is preferred over the other decoders. E.g. all ad_mpg123 decoders are preferred over ad_lavc, because it comes first in the mpcodecs_ad_drivers array. Likewise, decoders within ad_lavc that are enumerated first by libavcodec (using av_codec_next()) are preferred. (This is actually critical to select h264 software decoding by default instead of vdpau. libavcodec and ffmpeg/avconv use the same method to select decoders by default, so we hope this is sane.) The codec names follow libavcodec's codec names as defined by AVCodecDescriptor.name (see libavcodec/codec_desc.c). Some decoders have names different from the canonical codec name. The AVCodecDescriptor API is relatively new, so we need a compatibility layer for older libavcodec versions for codec names that are referenced internally, and which are different from the decoder name. (Add a configure check for that, because checking versions is getting way too messy.) demux/codec_tags.c is generated from the former codecs.conf (minus "special" decoders like vdpau, and excluding the mappings that are the same as the mappings libavformat's exported RIFF tables). It contains all the mappings from FourCCs to codec name. This is needed for demux_mkv, demux_mpg, demux_avi and demux_asf. demux_lavf will set the codec as determined by libavformat, while the other demuxers have to do this on their own, using the mp_set_audio/video_codec_from_tag() functions. Note that the sh_audio/video->format members don't uniquely identify the codec anymore, and sh->codec takes over this role. Replace the --ac/--vc/--afm/--vfm with new --vd/--ad options, which provide cover the functionality of the removed switched. Note: there's no CODECS_FLAG_FLIP flag anymore. This means some obscure container/video combinations (e.g. the sample Film_200_zygo_pro.mov) are played flipped. ffplay/avplay doesn't handle this properly either, so we don't care and blame ffmeg/libav instead.
2013-02-09 14:15:19 +00:00
options: Move osd_level and osd_duration to options struct
2009-03-29 23:06:58 +00:00
int osd_level;
int osd_duration;
OSD: support displaying fractional part of current position Add option -osd-fractions which enables display of fractional seconds when showing the current playback time on OSD. Based on a patch from Christian <herr.mitterlehner@gsmpaaiml.com> but with several modifications.
2011-04-12 15:11:12 +00:00
int osd_fractions;
mplayer: remove benchmarking/CPU accounting code The code used for benchmarking and showing CPU stats in the status line was inaccurate, misleading and fragile. The final nail in the coffin is the fact that many libav decoders are multithreaded now, and mplayer couldn't possibly measure the CPU time consumed by them. Add the --untimed option. This makes the video untimed, just like --benchmark did (still requires disabling audio synchronization).
2012-07-29 22:27:50 +00:00
int untimed;
core: add --stream-capture This is a partial revert of commit 7059c15, and basically re-adds --capture, just with different option names and slightly different semantics.
2013-05-11 20:19:33 +00:00
char *stream_capture;
core: re-add -dumpstream as --stream-dump Apparently useful for dumping DVD. Could also be used to rip streams with libquvi and such, but for that there are better tools. Actually I doubt there aren't better tools to dump DVDs, but whatever, this was a feature request, so I don't need a good reason.
2013-05-11 20:40:46 +00:00
char *stream_dump;
player: add an option to abort playback on partial init failures This is probably what libmpv users want; and it also improves error reporting (or we'd have to add a way to communicate such mid-playback failures as events).
2014-10-28 18:51:44 +00:00
int stop_playback_on_init_failure;
Move loop_times to option struct
2008-04-21 02:18:40 +00:00
int loop_times;
player: add a --loop-file option Unlike --loop, loops a file instead of the playlist.
2014-04-17 21:55:04 +00:00
int loop_file;
mplayer: reshuffle on every loop if --loop and --shuffle are used See github issue #194. Unfortunately, this breaks the property that going back in the playlist always works as expected. This changes, because the playlist_prev command will work on the reshuffled playlist, instead of loading the previously played files in order. If this ever becomes an issue, I might revert this commit.
2013-08-18 22:50:39 +00:00
int shuffle;
Add option -noordered-chapters.
2009-04-07 23:37:27 +00:00
int ordered_chapters;
matroska: add --ordered-chapters-files option This option takes a playlist. The playlist will then be used as list of potential segment files for use with ordered chapters.
2013-12-14 20:52:37 +00:00
char *ordered_chapters_files;
core: ordered chapters: add heuristic for merging inaccurate chapters Some Matroska files have inaccurate ordered chapter endpoints, and so parts where one chapter should end and the next begin at the same timestamp were not merged. This resulted in an unnecessary seek over a minimal distance. Add a heuristic to merge parts with a minimal gap or overlap between them. Based on patch by Hector Martin <hector@marcansoft.com>.
2010-11-26 14:56:05 +00:00
int chapter_merge_threshold;
command: more intuitive chapter seek behavior If close to chapter start, skipping back goes to previous chapter (no change). If more than <threshold> seconds in, skipping back will now go to the beginning of the current chapter instead. The threshold is set by the new option --chapter-seek-threshold and defaults to 5 seconds. A negative value disables the new functionality.
2013-08-14 01:25:50 +00:00
double chapter_seek_threshold;
player: add --chapters-file option Note that you can't pass .cue or .edl files to it, at least not yet. Requested in context of allowing to specify custom chapters. For that to work well, we probably need to add some sort of chapter metadata pseudo-demuxer.
2014-11-02 15:47:23 +00:00
char *chapter_file;
core: add a playlist demuxer Modeled after the old playlist_parser.c, but actually new code, and it works a bit differently. Demuxers (and sometimes streams) are the component that should be used to open files and to determine the file format. This was already done for subtitles, but playlists still use a separate code path.
2013-08-25 18:40:21 +00:00
int load_unsafe_playlists;
player: add --merge-files option
2013-11-19 21:36:33 +00:00
int merge_files;
options: move various mplayer.c options to option struct Following options were moved: [no]quiet, [no]autosync, softsleep, [no]rtc, rtc-device.
2010-11-12 20:04:16 +00:00
int quiet;
options: change --no-config option, make it apply to input.conf as well Simplify --no-config and make it a normal flag option, and doesn't take an argument anymore. You can get the same behavior by using --no-config and then --include to explicitly load a certain config file. Make --no-config work for input.conf as well. Make it so that --input:conf=file still works in this case. As a technically unrelated change, the file argument now works as one would expect, instead of making it relatively to "~/.mpv/". This makes for simpler code and easier to understand option semantics. We can also print better error messages.
2013-02-08 22:52:06 +00:00
int load_config;
config: add a --config-dir option to force config directory Useful for slave-mode like uses, and not as radical as --no-config.
2014-02-25 20:04:04 +00:00
char *force_configdir;
core: remove a number of global variables Move them into per-instance structs. This should get rid of all global variables in mplayer.c (not counting those referenced by cfg-mplayer.h). In core/input/ar.c, just remove checking the slave_mode variable. I'm not sure what this code was supposed to achieve, but slave mode is broken, slave mode is actually infeasible on OSX (ar.c is completely OSX specific), and the correct way of doing this would be to disable this input device per command line switch.
2013-03-08 01:08:02 +00:00
int use_filedir_conf;
network: fix rtsp playback By default, libavformat uses UDP for rtsp playback. This doesn't work very well. Apparently the reason is that the buffer sizes libavformat chooses for UDP are way too small, and switching to TCP gets rid of this issue entirely (thanks go to Reimar Döffinger for figuring this out). In theory, you can set buffer sizes as libavformat options, but that doesn't seem to help. Add an option to select the rtsp transport, and make TCP the default. Also remove an outdated comment from stream.c.
2013-09-22 00:40:29 +00:00
int network_rtsp_transport;
player: simplistic HLS bitrate selection --hls-bitrate=min/max lets you select the min or max bitrate. That's it. Something more sophisticated might be possible, but is probably not even worth the effort.
2014-09-01 21:47:27 +00:00
int hls_bitrate;
cache: redo options and default settings Some options change from percentages to number of kilobytes; there are no cache options using percentages anymore. Raise the default values. The cache is now 25000 kilobytes, although if your connection is slow enough, the maximum is probably never reached. (Although all the memory will still be used as seekback-cache.) Remove the separate --audio-file-cache option, and use the cache default settings for it.
2014-05-19 21:27:09 +00:00
struct mp_cache_opts stream_cache;
options: move -chapter values to option struct -chapter can optionally take a range with a start and an end. Add a new option type which supports such values and use that instead of a custom per-option function. This commit also fixes a build configuration bug: before the availability of the -chapter option depended on DVD functionality being enabled in the binary, even though the option works with other sources too.
2010-04-24 17:09:31 +00:00
int chapterrange[2];
Support for multiple editions in Matroska Add code to intelligently choose an appropriate Matroska edition when there are several. Will choose, in descending order of preference: the edition chosen by the user through the option "-edition <edition id>" if it exists, the first edition with EditionFlagDefault set to 1 if there is one, or the first edition.
2009-12-01 12:28:34 +00:00
int edition_id;
options.h: Field order cosmetics Move correct_pts and user_correct_pts next to each other. loop_times was accidentally added between them.
2008-04-25 10:30:44 +00:00
int correct_pts;
core: do initial A-V sync by modifying audio stream Add code to enforce matching pts with video when (re)starting the audio stream, by either cutting away the first samples or inserting silence at the beginning. New option -noinitial-audio-sync can be used to disable this and return to old behavior.
2010-11-13 17:27:01 +00:00
int initial_audio_sync;
player: add display sync mode If this mode is enabled, the player tries to strictly synchronize video to display refresh. It will adjust playback speed to match the display, so if you play 23.976 fps video on a 24 Hz screen, playback speed is increased by approximately 1/1000. Audio wll be resampled to keep up with playback. This is different from the default sync mode, which will sync video to audio, with the consequence that video might skip or repeat a frame once in a while to make video keep up with audio. This is still unpolished. There are some major problems as well; in particular, mkv VFR files won't work well. The reason is that Matroska is terrible and rounds timestamps to milliseconds. This makes it rather hard to guess the framerate of a section of video that is playing. We could probably fix this by just accepting jittery timestamps (instead of explicitly disabling the sync code in this case), but I'm not ready to accept such a solution yet. Another issue is that we are extremely reliant on OS video and audio APIs working in an expected manner, which of course is not too often the case. Consequently, the new sync mode is a bit fragile.
2015-08-10 16:43:25 +00:00
int video_sync;
double sync_max_video_change;
double sync_max_audio_change;
player: add audio drop/duplicate mode Not very robust in the moment.
2015-10-27 19:56:46 +00:00
double sync_audio_drop_size;
core: add support for precise non-keyframe-limited seeks Add support for seeking to an arbitrary non-keyframe position by decoding video starting from the previous keyframe. Whether to use this functionality when seeking is controlled by the new option -hr-seek and a new third argument to the "seek" command. The default is to use it for absolute seeks (like chapter seeks) but not for relative ones. Because there's currently no support for cutting encoded audio some desync is expected if encoded audio passthrough is used. Currently precise seeks always go to the first frame with timestamp equal to or greater than the target position; there's no support for "matching or earlier" backwards seeks at frame level.
2010-12-14 23:09:47 +00:00
int hr_seek;
options, core/hrseek: add --hr-seek-demuxer-offset Some demuxers do not accurately seek to a keyframe before a given time but instead start too late. This means that precise seeks cannot work either. Most notably the libavformat mpeg demuxer exhibits this behavior depending on the file being played (with the internal mpeg demuxer precise seeks don't work at all). Add new option --hr-seek-demuxer-offset which can be used as a workaround with such demuxers. The value of the option is subtracted from the seek target position given to the demuxer when doing a precise seek.
2011-11-06 14:54:57 +00:00
float hr_seek_demuxer_offset;
options: add --hr-seek-framedrop option This allows disabling of decoder framedrop during hr-seek. It's basically another useless option, but it will help exploring whether this framedropping really makes seeking faster, or whether disabling it helps with precise seeking (especially frame backstepping).
2014-05-07 20:01:17 +00:00
int hr_seek_framedrop;
core: remove a number of global variables Move them into per-instance structs. This should get rid of all global variables in mplayer.c (not counting those referenced by cfg-mplayer.h). In core/input/ar.c, just remove checking the slave_mode variable. I'm not sure what this code was supposed to achieve, but slave mode is broken, slave mode is actually infeasible on OSX (ar.c is completely OSX specific), and the correct way of doing this would be to disable this input device per command line switch.
2013-03-08 01:08:02 +00:00
float audio_delay;
float default_max_pts_correction;
options: move various mplayer.c options to option struct Following options were moved: [no]quiet, [no]autosync, softsleep, [no]rtc, rtc-device.
2010-11-12 20:04:16 +00:00
int autosync;
commands: replace --hardframedrop, change framedropping property Replace --hardframedrop with --framedrop=hard. Rename the framedrop property from "framedropping" to "framedrop" for the sake of making command line options have the same name as their corresponding property. Change the property to accept choice values instead of numeric values. Remove unused/forgotten auto_quality variable.
2012-09-17 06:38:19 +00:00
int frame_dropping;
video: add --display-fps switch to control framedrop FPS Since the display FPS is currently detected on X11 only (and even there it's known to be wrong on certain setups), it seems like a good idea to make this user-configurable.
2014-08-15 22:05:02 +00:00
double frame_drop_fps;
options: more mplayer.c options moved to option struct Following options were moved: autoq, benchmark, [no]term-osd, term-osd-esc, playing-msg, [no]idle, [no]consolecontrols, list-properties.
2010-11-13 21:10:58 +00:00
int term_osd;
player: add --term-osd-bar, which shows a status bar on the terminal Feature request from github issue #451. Disabled by default, will probably stay this way.
2014-01-15 15:14:37 +00:00
int term_osd_bar;
char *term_osd_bar_chars;
options: more mplayer.c options moved to option struct Following options were moved: autoq, benchmark, [no]term-osd, term-osd-esc, playing-msg, [no]idle, [no]consolecontrols, list-properties.
2010-11-13 21:10:58 +00:00
char *playing_msg;
player: add --osd-playing-msg option
2014-09-01 22:09:03 +00:00
char *osd_playing_msg;
options: add --status-msg Replaces the status line with a custom string. This is probably useful for hacking old slave mode applications into working again. Even if not, this might be generally useful.
2012-10-02 01:12:09 +00:00
char *status_msg;
osd: add --osd-status-msg option for custom OSD status
2013-02-16 21:14:33 +00:00
char *osd_status_msg;
player: allow overriding OSD message for all OSD levels Until now, you could override only level 3 with --osd-status-msg. Extend this, add add --osd-msg1 to --osd-msg3 (one for each OSD level). OSD level 0 always means disable OSD, so that isn't included. --osd-msg3 corresponds to --osd-status-msg, but they're not exactly the same. To allow more customization, --osd-msgN do not include the OSD symbol. The symbol can be manually added with "${osd-sym-cc}". We keep the "old" option for some short-term compatibility. --osd-msg1 should be particularly useful; for example you could do: --osd-msg1='${?pause==yes:${osd-sym-cc}}' to display a "paused" symbol when paused, and nothing during normal playback. (Although admittedly, the syntax is quite a bit of work.)
2014-09-17 23:19:27 +00:00
char *osd_msg[3];
core: remove a number of global variables Move them into per-instance structs. This should get rid of all global variables in mplayer.c (not counting those referenced by cfg-mplayer.h). In core/input/ar.c, just remove checking the slave_mode variable. I'm not sure what this code was supposed to achieve, but slave mode is broken, slave mode is actually infeasible on OSX (ar.c is completely OSX specific), and the correct way of doing this would be to disable this input device per command line switch.
2013-03-08 01:08:02 +00:00
char *heartbeat_cmd;
core: add --heartbeat-interval option This closely follows MPlayer commit 36099, with some changes. Move a mutable static variable into MPContext.
2013-04-04 12:24:42 +00:00
float heartbeat_interval;
options: more mplayer.c options moved to option struct Following options were moved: autoq, benchmark, [no]term-osd, term-osd-esc, playing-msg, [no]idle, [no]consolecontrols, list-properties.
2010-11-13 21:10:58 +00:00
int player_idle_mode;
int consolecontrols;
player: add --playlist-pos option Oddly often requested.
2015-08-22 20:08:17 +00:00
int playlist_pos;
options: rename -ss and -endpos, allow relative times Rename the -ss option to -start, and -endpos to -length. Add a -end option. The -end option always specifies an absolute end time, as opposed to -endpos/-length. All these options (--start, --end, --length) now accept relative times. Percent positions (e.g. "--start=30%") are interpreted as fractions of the file duration. Negative times (e.g. "--start=-1:00) are interpreted relative to the end of the file. Chapters (e.g. "--start=#3") yield the chapter's time position. The chapter support might be able to replace --chapter completely, but for now I am not sure how well this works out with e.g. DVDs and BDs, and a separate --chapter option is useful interface-wise.
2012-11-15 17:49:17 +00:00
struct m_rel_time play_start;
struct m_rel_time play_end;
struct m_rel_time play_length;
player: handle rebasing start time differently Most of this is explained in the DOCS additions. This gives us slightly more sanity, because there is less interaction between the various parts. The goal is getting rid of the video_offset entirely. The simplification extends to the user API. In particular, we don't need to fix missing parts in the API, such as the lack for a seek command that seeks relatively to the start time. All these things are now transparent. (If someone really wants to know the real timestamps/start time, new properties would have to be added.)
2015-11-16 21:47:17 +00:00
int rebase_start_time;
core: remove a number of global variables Move them into per-instance structs. This should get rid of all global variables in mplayer.c (not counting those referenced by cfg-mplayer.h). In core/input/ar.c, just remove checking the slave_mode variable. I'm not sure what this code was supposed to achieve, but slave mode is broken, slave mode is actually infeasible on OSX (ar.c is completely OSX specific), and the correct way of doing this would be to disable this input device per command line switch.
2013-03-08 01:08:02 +00:00
int play_frames;
command: implement A-B loops Probably needs to be polished a bit more. Also, might require a key binding that can set/clear the loop points in a more intuitive way. For now, something like this can be put into input.conf to use it: ctrl+y set ab-loop-a ${time-pos} # set A ctrl+x set ab-loop-b ${time-pos} # set B ctrl+c set ab-loop-a no # clear (mostly) Fixes #1241.
2014-11-17 23:09:42 +00:00
double ab_loop[2];
core: remove a number of global variables Move them into per-instance structs. This should get rid of all global variables in mplayer.c (not counting those referenced by cfg-mplayer.h). In core/input/ar.c, just remove checking the slave_mode variable. I'm not sure what this code was supposed to achieve, but slave mode is broken, slave mode is actually infeasible on OSX (ar.c is completely OSX specific), and the correct way of doing this would be to disable this input device per command line switch.
2013-03-08 01:08:02 +00:00
double step_sec;
core: add playback resume feature (manual/opt-in) A "watch later" command is now mapped to Shift+Q. This quits the player and stores the playback state in a config file in ~/.mpv/watch_later/. When calling the player with the same file again, playback is resumed at that time position. It's also possible to make mpv save playback state always on quit with the --save-position-on-quit option. Likewise, resuming can be disabled with the --no-resume-playback option. This also attempts to save some playback parameters, like fullscreen state or track selection. This will unconditionally override config settings and command line options (which is probably not what you would expect, but in general nobody will really care about this). Some things are not backed up, because that would cause various problems. Additional subtitle files, video filters, etc. are not stored because that would be too hard and fragile. Volume/mute state are not stored because it would mess up if the system mixer is used, or if the system mixer was readjusted in the meantime. Basically, the tradeoff between perfect state restoration and complexity/fragility makes it not worth to attempt to implement it perfectly, even if the result is a little bit inconsistent.
2013-05-05 17:37:29 +00:00
int position_resume;
int position_save_on_quit;
player: write file name to the watch later config file This simply writes the file name as a comment to the top of the watch later config file. It can be useful to the user for determining whether a watch later config file can be manually removed (e.g. in case the corresponding media file has been deleted) or not.
2014-06-01 16:25:21 +00:00
int write_filename_in_watch_later_config;
options: add option for ignoring patch in resume mechanism Whatever. Fixes #1281.
2014-12-12 22:57:49 +00:00
int ignore_path_in_watch_later_config;
core: simplify handling of --pause Rename the struct MPOpts "start_pause" field to "pause". Store the user- pause state in that field, so that both runtime pause toggling and the --pause switch change the same variable. Simplify the initialization of pause so that using --pause and changing the file while paused is exactly the same case (changing the file while paused doesn't unpause, this has been always this way). Also make it a bit more consistent. Before, starting with --pause would reset the pause state for every file, instead of following the usual semantics for option switches (compare with behavior of --fs).
2013-04-25 18:38:22 +00:00
int pause;
core: add --keep-open, which doesn't close the file on EOF The --keep-open option causes mpv not to close the current file. Instead, it will pause, and allow the user to seek around. When seeking beyond the end of the file, mpv does a precise seek back to the previous last known position that produced video output. In some corner cases, mpv might not be able to produce video output at all, despite having created a VO. (Possibly when only 1 frame could be decoded, but the video filter chain queues frames. Then a VO would be created, without sending an actual video frame to the VO.) In these cases, the VO window will not redraw, not even OSD. Based on a patch by coax [1]. [1] http://devel.mplayer2.org/ticket/210#comment:4
2012-11-12 23:56:20 +00:00
int keep_open;
player: add complex filter graph support See --lavfi-complex option. This is still quite rough. There's no support for dynamic configuration of any kind. There are probably corner cases where playback might freeze or burn 100% CPU (due to dataflow problems when interaction with libavfilter). Future possible plans might include: - freely switch tracks by providing some sort of default track graph label - automatically enabling audio visualization - automatically mix audio or stack video when multiple tracks are selected at once (similar to how multiple sub tracks can be selected)
2016-02-05 22:19:56 +00:00
char *lavfi_complex;
player: use an array for stream ID options and such This makes the code slightly more generic.
2015-05-22 19:00:24 +00:00
int stream_id[2][STREAM_TYPE_COUNT];
int stream_id_ff[STREAM_TYPE_COUNT];
char **stream_lang[STREAM_TYPE_COUNT];
core: allow disabling display of "album art" in audio files ffmpeg pretends that image attachments (such as contained in ID3v2 metadata) are video streams. It injects the attached pictures as packets into the packet stream received with av_read_frame(). Add the --audio-display option to allow configuring whether attached pictures should be displayed. The default behavior doesn't change (images are displayed). Identify video streams, that are actually image attachments, with "[P]" in the terminal output. Modify the default stream selection such that real video streams are preferred over attached pictures. (This is just for robustness; I do not know of any samples where images are added before actual video streams and could lead to bad default stream selection with the old code.)
2012-12-10 17:52:06 +00:00
int audio_display;
player: filter tags, add --display-tags option This attempts to increase user-friendliness by excluding useless tags. It should be especially helpful with mp4 files, because the FFmpeg mp4 demuxer adds tons of completely useless information to the metadata. Fixes #1403.
2014-12-29 21:51:18 +00:00
char **display_tags;
subs: always use sub decoder framework for libass rendering Remove subtitle selection code setting osd->ass_track directly and vf_ass/vf_vo code rendering the track directly with libass. Instead, do track selection and rendering with dec_sub.c functions. Before, mpctx->set_of_ass_tracks[] contained bare libass tracks generated from external subtitle files. For use with dec_sub.c, it now contains struct sh_sub instances with decoder already initialized. This commit breaks the sub_step command ('g' and 'y' keys) for libass-rendered subtitles. It could be fixed, but it's so useless - especially as with the existing implementation there's no practical way to get subtitle delay back to normal after using it - that I didn't bother. Conflicts: command.c mp_core.h mplayer.c
2012-08-25 18:22:39 +00:00
int sub_visibility;
sub: remove some global variables
2013-04-28 23:49:20 +00:00
int sub_pos;
float sub_delay;
float sub_fps;
options: add -sub-speed option Should we actually get into trouble for unproper handling of frame-based subtitle formats, this might be the simplest way to work this around. Also is a bit more intuitive than -subfps, which might use an unknown, misdetected, or non-sense video FPS. Still pretty silly, though.
2013-06-24 22:03:37 +00:00
float sub_speed;
core: remove a number of global variables Move them into per-instance structs. This should get rid of all global variables in mplayer.c (not counting those referenced by cfg-mplayer.h). In core/input/ar.c, just remove checking the slave_mode variable. I'm not sure what this code was supposed to achieve, but slave mode is broken, slave mode is actually infeasible on OSX (ar.c is completely OSX specific), and the correct way of doing this would be to disable this input device per command line switch.
2013-03-08 01:08:02 +00:00
int forced_subs_only;
sd_lavc, sd_spu: make dvdsub stretching conditional on --stretch-dvd-subs. We found that the stretching - although it usually improves the looks of the fonts - is incorrect. On DVD, subtitles can cover the full area of the picture, and they have the same pixel aspect as the movie itself. Too bad many commercially released DVDs use bitmap fonts made with the wrong pixel aspect (i.e. assuming 1:1) - --stretch-dvd-subs will make these more pretty then.
2013-11-01 15:02:47 +00:00
int stretch_dvd_subs;
sub: add option for stretching image subtitles to screen Probably makes users happy who want bitmap subtitles to show up in the screen margins, and stops them from doing idiotic crap with vf_expand. Fixes #2098.
2015-07-18 12:36:17 +00:00
int stretch_image_subs;
options: move some demux options to option struct Following options were moved: audiofile, audiofile-cache, subfile, demuxer, audio-demuxer, sub-demuxer, [no]extbased.
2010-11-11 14:24:17 +00:00
options: remove use of an inverted option value Now MPOpts.sub_fix_timing corresponds to the commandline switch directly, instead of storing the inverted value.
2014-06-13 00:06:03 +00:00
int sub_fix_timing;
sub: remove some global variables
2013-04-28 23:49:20 +00:00
char *sub_cp;
options: allow adding multiple files with --audio-file At least 1 person expected that this works this way.
2014-06-17 23:40:20 +00:00
char **audio_files;
options: move some demux options to option struct Following options were moved: audiofile, audiofile-cache, subfile, demuxer, audio-demuxer, sub-demuxer, [no]extbased.
2010-11-11 14:24:17 +00:00
char *demuxer_name;
demux: add options to control maximum queue size Add --demuxer-max-packets and --demuxer-max-bytes, which control the maximum size of the packet queue. These can be helpful to avoid excessive memory usage. Memory usage is the reason why there's a limit in the first place. If a file is more or less broken, and audio and video don't line up, the decoders will fill up the packet queue trying to read more audio or video, and the maximum sizes are required to avoid unbounded memory allocation. Being able to override the maximum sizes is useful; either for restricting memory usage further, or enlarging the sizes when attempting to play various broken files.
2015-08-05 21:41:29 +00:00
int demuxer_max_packs;
int demuxer_max_bytes;
demux: add a demuxer thread This adds a thread to the demuxer which reads packets asynchronously. It will do so until a configurable minimum packet queue size is reached. (See options.rst additions.) For now, the thread is disabled by default. There are some corner cases that have to be fixed, such as fixing cache behavior with webradios. Note that most interaction with the demuxer is still blocking, so if e.g. network dies, the player will still freeze. But this change will make it possible to remove most causes for freezing. Most of the new code in demux.c actually consists of weird caches to compensate for thread-safety issues (with the previously single-threaded design), or to avoid blocking by having to wait on the demuxer thread. Most of the changes in the player are due to the fact that we must not access the source stream directly. the demuxer thread already accesses it, and the stream stuff is not thread-safe. For timeline stuff (like ordered chapters), we enable the thread for the current segment only. We also clear its packet queue on seek, so that the remaining (unconsumed) readahead buffer doesn't waste memory. Keep in mind that insane subtitles (such as ASS typesetting muxed into mkv files) will practically disable the readahead, because the total queue size is considered when checking whether the minimum queue size was reached.
2014-07-16 20:40:21 +00:00
int demuxer_thread;
demux: add option to control the readahead buffer by a duration value --demuxer-readahead-secs now controls how much the demuxer should readahead by an amount of seconds. This is based on the raw packet timestamps. It's not always very exact. For example, h264 in Matroska does not store any linear timestamps (only PTS values which are going to be reordered by the decoder), so this heuristic is usually off by several hundred milliseconds. The decision whether to readahead is basically OR-ed with the other --demuxer-readahead-packets options. Change the manpage descriptions to subtly convey these semantics.
2014-08-16 15:07:36 +00:00
double demuxer_min_secs;
options: move some demux options to option struct Following options were moved: audiofile, audiofile-cache, subfile, demuxer, audio-demuxer, sub-demuxer, [no]extbased.
2010-11-11 14:24:17 +00:00
char *audio_demuxer_name;
char *sub_demuxer_name;
player: disable seeking even if the cache is enabled Until now, if a stream wasn't seekable, but the stream cache was enabled (--cache), we've enabled seeking anyway. The idea was that at least short seeks would typically fall within the cache. And if not, the user was out of luck and terrible things happened. In other words, it was unreliable. Be stricter about it and remove this behavior. Effectively, this will for example disable seeking in piped data. Instead of trying to be clever, add an --force-seekable option, which will always enable seeking if the user really wants it.
2015-07-08 20:04:35 +00:00
int force_seekable;
options: move some demux options to option struct Following options were moved: audiofile, audiofile-cache, subfile, demuxer, audio-demuxer, sub-demuxer, [no]extbased.
2010-11-11 14:24:17 +00:00
player: redo how stream caching and pausing on low cache works Add the --cache-secs option, which literally overrides the value of --demuxer-readahead-secs if the stream cache is active. The default value is very high (10 seconds), which means it can act as network cache. Remove the old behavior of trying to pause once the byte cache runs low. Instead, do something similar wit the demuxer cache. The nice thing is that we can guess how many seconds of video it has cached, and we can make better decisions. But for now, apply a relatively naive heuristic: if the cache is below 0.5 secs, pause, and wait until at least 2 secs are available. Note that due to timestamp reordering, the estimated cached duration of video might be inaccurate, depending on the file format. If the file format has DTS, it's easy, otherwise the duration will seemingly jump back and forth.
2014-08-26 23:13:20 +00:00
double demuxer_min_secs_cache;
int cache_pausing;
image_writer: add option parsing image_writer now provides its own option parsing, and screenshot.c and the mplayer frontend use it.
2012-08-06 15:48:30 +00:00
struct image_writer_opts *screenshot_image_opts;
screenshot: make screenshot filenames configurable This adds the --screenshot-template option, which specifies a template for the filename used for a screenshot. The '%' character is parsed as format specifier. These format specifiers insert metadata into the filename. For example, '%f' is replaced with the filename of the currently played file. The following format specifiers are available: %n Insert sequence number (padded with 4 zeros), e.g. "0002". %0Nn Like %n, but pad to N zeros (N = 0 to 9). %n behaves like %04n. %#n Like %n, but reset the sequence counter on every screenshot. (Useful if other parts in the template make the resulting filename already mostly unique.) %#0Nn Use %0Nn and %#n at the same time. %f Insert filename of the currently played video. %F Like %f, but with stripped file extension ("." and rest). %p Insert current playback time, in HH:MM:SS format. %P Like %p, but adds milliseconds: HH:MM:SS.mmmm %tX Insert the current local date/time, using the date format X. X is a single letter and is passed to strftime() as "%X". E.g. "%td" inserts the number of the current day. %{prop} Insert the value of the slave property 'prop'. E.g. %{filename} is the same as %f. If the property doesn't exist or is not available, nothing is inserted, unless a fallback is specified as in %{prop:fallback text}. %% Insert the character '%'. The strings inserted by format specifiers will be checked for characters not allowed in filenames (including '/' and '\'), and replaced with the placeholder '_'. (This doesn't happen for text that was passed with the --screenshot-template option, and allows specifying a screenshot target directory by prefixing the template with a relative or absolute path.)
2012-02-29 02:46:25 +00:00
char *screenshot_template;
options: fix typo in variable name
2015-05-03 12:44:42 +00:00
char *screenshot_directory;
screenshot: add jpg support The screenshot image file type can now be selected with the --screenshot-filetype option. The --screenshot-jpeg-quality option controls the compression setting of the written JPEG image file.
2011-10-06 18:46:02 +00:00
core: remove a number of global variables Move them into per-instance structs. This should get rid of all global variables in mplayer.c (not counting those referenced by cfg-mplayer.h). In core/input/ar.c, just remove checking the slave_mode variable. I'm not sure what this code was supposed to achieve, but slave mode is broken, slave mode is actually infeasible on OSX (ar.c is completely OSX specific), and the correct way of doing this would be to disable this input device per command line switch.
2013-03-08 01:08:02 +00:00
double force_fps;
options: turn --idx, --forceidx into --index Also clarify the semantics. It seems --idx didn't do anything. Possibly it used to change how the now removed legacy demuxers like demux_avi used to behave. Or maybe it was accidental. --forceidx basically becomes --index=force. It's possible that new index modes will be added in the future, so I'm keeping it extensible, instead of e.g. creating --force-index.
2014-06-13 00:05:37 +00:00
int index_mode;
core: remove a number of global variables Move them into per-instance structs. This should get rid of all global variables in mplayer.c (not counting those referenced by cfg-mplayer.h). In core/input/ar.c, just remove checking the slave_mode variable. I'm not sure what this code was supposed to achieve, but slave mode is broken, slave mode is actually infeasible on OSX (ar.c is completely OSX specific), and the correct way of doing this would be to disable this input device per command line switch.
2013-03-08 01:08:02 +00:00
core: use channel map on demuxer level too This helps passing the channel layout correctly from decoder to audio filter chain. (Because that part "reuses" the demuxer level codec parameters, which is very disgusting.) Note that ffmpeg stuff already passed the channel layout via mp_copy_lav_codec_headers(). So other than easier dealing with the demuxer/decoder parameters mess, there's no real advantage to doing this. Make the --channels option accept a channel map. Since simple numbers map to standard layouts with the given number of channels, this is downwards compatible. Likewise for demux_rawaudio.
2013-04-06 20:43:12 +00:00
struct mp_chmap audio_output_channels;
options: move audio_output_channels, audio_output_format to struct
2010-10-31 05:26:40 +00:00
int audio_output_format;
audio: change downmix behavior, add --audio-normalize-downmix This is probably the 3rd time the user-visible behavior changes. This time, switch back because not normalizing seems to be the more expected behavior from users.
2016-01-20 16:14:04 +00:00
int audio_normalize;
core: remove a number of global variables Move them into per-instance structs. This should get rid of all global variables in mplayer.c (not counting those referenced by cfg-mplayer.h). In core/input/ar.c, just remove checking the slave_mode variable. I'm not sure what this code was supposed to achieve, but slave mode is broken, slave mode is actually infeasible on OSX (ar.c is completely OSX specific), and the correct way of doing this would be to disable this input device per command line switch.
2013-03-08 01:08:02 +00:00
int force_srate;
Add a --dtshd option The spdif decoder was hardcoded to assume that the spdif output is capable of accepting high (>1.5Mbps) bitrates. While this is true for modern HDMI spdif interfaces, the original coax/toslink system cannot deal with this and will fail to work. This patch adds an option --dtshd which can be enabled if you use a DTS-capable receiver behind a HDMI link.
2013-03-03 17:48:20 +00:00
int dtshd;
core: change speed option/property to double The --speed option and the speed property used float. Change them to double. Change the commands that manipulate the property (speed_mult/add) to double as well. Since the cycle command shares code with the add command, we change that as well. The reason for this change is that this allows better control over speed, such as stepping by semitones. Using floats is also just plain unnecessary.
2013-08-04 21:56:20 +00:00
double playback_speed;
audio: enable pitch correction by default when playing fast Apparently this is what users want. When playing with normal speed, nothing is done. When playing slower than normal, resampling is used instead, because scaletempo (which does the pitch correction) adds too many artifacts.
2014-10-02 00:58:52 +00:00
int pitch_correction;
options: add options that set defaults for af/vf/ao/vo There are some use cases for this. For example, you can use it to set defaults of automatically inserted filters (like af_lavrresample). It's also useful if you have a non-trivial VO configuration, and want to use --vo to quickly change between the drivers without repeating the whole configuration in the --vo argument.
2013-11-30 23:12:10 +00:00
struct m_obj_settings *vf_settings, *vf_defs;
struct m_obj_settings *af_settings, *af_defs;
core: add --deinterlace option, restore it with resume functionality The --deinterlace option does on playback start what the "deinterlace" property normally does at runtime. You could do this before by using the --vf option or by messing with the vo_vdpau default options, but this new option is supposed to be a "foolproof" way. The main motivation for adding this is so that the deinterlace property can be restored when using the video resume functionality (quit_watch_later command). Implementation-wise, this is a bit messy. The video chain is rebuilt in mpcodecs_reconfig_vo(), where we don't have access to MPContext, so the usual mechanism for enabling deinterlacing can't be used. Further, mpcodecs_reconfig_vo() is called by the video decoder, which doesn't have access to MPContext either. Moving this call to mplayer.c isn't currently possible either (see below). So we just do this before frames are filtered, which potentially means setting the deinterlacing every frame. Fortunately, setting deinterlacing is stable and idempotent, so this is hopefully not a problem. We also add a counter that is incremented on each reconfig to reduce the amount of additional work per frame to nearly zero. The reason we can't move mpcodecs_reconfig_vo() to mplayer.c is because of hardware decoding: we need to check whether the video chain works before we decide that we can use hardware decoding. Changing it so that this can be decided in advance without building a filter chain sounds like a good idea and should be done, but we aren't there yet.
2013-09-13 16:06:08 +00:00
int deinterlace;
Move movie_aspect to options struct
2008-04-24 04:36:43 +00:00
float movie_aspect;
video: make container vs. bitstream aspect ratio configurable Utterly idiotic bullshit. Fixes #2259.
2015-08-30 21:01:46 +00:00
int aspect_method;
dec_video: get rid of two global variables
2013-05-20 22:45:42 +00:00
int field_dominance;
options: move sub_name, sub_auto and vobsub_name to struct
2011-02-07 23:35:51 +00:00
char **sub_name;
subs: options: add -sub-paths
2011-03-03 10:31:12 +00:00
char **sub_paths;
options: add --audio-file-paths Requested. It works like --sub-paths. This will also load audio files from a "audio" sub directory in the config file (because the same code as for subtitles is used, and it also had such a feature). Fixes #2632.
2015-12-25 12:17:11 +00:00
char **audiofile_paths;
player: add --external-file option Mostly intended for use with --lavfi-complex.
2016-02-08 20:18:35 +00:00
char **external_files;
options: move sub_name, sub_auto and vobsub_name to struct
2011-02-07 23:35:51 +00:00
int sub_auto;
player: add external audio file auto-loading Apparently some people want this. Not enabled by default. Fixes #967.
2015-02-02 20:23:12 +00:00
int audiofile_auto;
osd: add --no-osd-bar option to disable the OSD bar In addition to disabling the OSD bar physically, also add some fallbacks to OSD text in places the OSD bar would have been used.
2013-02-16 20:17:59 +00:00
int osd_bar_visible;
osd: add --osd-bar-align-x/y options to control OSD bar position
2013-02-14 19:43:00 +00:00
float osd_bar_align_x;
float osd_bar_align_y;
osd: draw the OSD bar with ASS vector drawings Drawing the bar with vector drawings (instead with characters from the OSD font) offers more flexibility and looks better. This also adds chapter marks to the OSD bar, which are visible as small triangles on the top and bottom inner border of the bar. Change the default position of the OSD bar below the center of the screen. This is less annoying than putting the bar directly into the center of the view, where it obscures the video. The new position is not quite on the bottom of the screen to avoid collisions with subtitles. The old centered position can be forced with ``--osd-bar-align-y=0``. Also make it possible to change the OSD bar width/height with the new --osd-bar-w and --osd-bar-h options. It's possible that the new OSD bar renders much slower than the old one. There are two reasons for this: 1. the character based bar allowed libass to cache each character, while the vector drawing forces it to redraw every time the bar position changes. 2., the bar position is updated at a much higher granularity (the bar position is passed along as float instead of as integer in the range 0-100, so the bar will be updated on every single video frame).
2013-03-30 19:08:56 +00:00
float osd_bar_w;
float osd_bar_h;
add osd-scale command Signed-off-by: Paul B Mahol <onemda@gmail.com> Modified to add docs for --osd-scale option, and adjusted to the previous commit by wm4.
2013-05-14 12:10:27 +00:00
float osd_scale;
osd: add option for "unscaled" OSD
2013-12-10 18:58:57 +00:00
int osd_scale_by_window;
sub: add option to not scale subtitles with window --sub-scale-by-window=no attempts to keep subs always at the same pixel size. The implementation is a bit all over the place, because it compensates already done scaling by an inverse scale factor, but it will probably do its job. Fixes #1424. (The semantics and name of --sub-scale-with-window are kept, and this adds a new option - the name is confusingly similar, but it's actually analogue to --osd-scale-by-window.)
2015-01-05 18:18:08 +00:00
int sub_scale_by_window;
int sub_scale_with_window;
sub: mess with styling defaults, change --ass-use-margins behavior Now --ass-use-margins doesn't apply to normal subtitles anymore. This is probably the inverse from the mpv behavior users expected so far, and thus a breaking change, so rename the option, that the user at least has a chance to lookup the option and decide whether the new behavior is wanted or not. The basic idea here is: - plain text subtitles should have a certain useful defalt behavior, like actually using margins - ASS subtitles should never be broken by default - ASS subtitles should look and behave like plaintext subtitles if the --ass-style-override=force option is used This also subtly changes --sub-scale-with-window and adds the --ass- scale-with-window option. Since this one isn't so important, don't bother with compatibility.
2015-02-16 19:04:15 +00:00
int ass_scale_with_window;
osd: make the OSD and sub font more customizable Make more aspects of the OSD font customizable. This also affects the font used for unstyled subtitles (such as SRT), or when using the --no-ass option. This adds back some customizability that was lost with commit 74e7a1 (osd: use libass for OSD rendering). Removed options: --ass-border-color --ass-color --font --subfont --subfont-text-scale Added options: --osd-color --osd-border --osd-back-color --osd-shadow-color --osd-font --osd-font-size --osd-border-size --osd-margin-x --osd-margin-y --osd-shadow-offset --osd-spacing --sub-scale The font size is now specified in pixels as it would be rendered on a window with a height of 720 pixels. OSD and subtitles are always scaled with the window height, so specifying or expecting an absolute font size doesn't make sense. Such scaled pixel units are used to specify font border etc. as well. (Note: the font size is directly passed to libass. How the fonts are actually rasterized is outside of our control, but in theory ASS font sizes map to "script" pixels and then are scaled to screen size.) The default settings should be about the same, with slight difference due to rounding to the new scales. The OSD and subtitle fonts are not separately configurable. It has limited use and would double the number of newly added options, which would be more confusing than helpful. It could be easily added later, should the need arise. Other small details that change: - ASS_Style.Encoding is not set to -1 for subs anymore (assuming subs use VSFilter direction in -no-ass mode too) - use a different WrapStyle for OSD - ASS forced styles are not applied to OSD
2012-11-17 19:56:45 +00:00
struct osd_style_opts *osd_style;
sub: add --sub-text-* options to unstyled text subtitles font Before this commit, the --osd-* options (like --osd-font-size etc.) configured both the OSD and subtitle font. Make them separate, and add --sub-text-* options (like --sub-text-size etc.). Now --osd-* affects the OSD font only, and --sub-text-* unstyled text subtitles only.
2013-01-04 15:10:17 +00:00
struct osd_style_opts *sub_text_style;
osd: make the OSD and sub font more customizable Make more aspects of the OSD font customizable. This also affects the font used for unstyled subtitles (such as SRT), or when using the --no-ass option. This adds back some customizability that was lost with commit 74e7a1 (osd: use libass for OSD rendering). Removed options: --ass-border-color --ass-color --font --subfont --subfont-text-scale Added options: --osd-color --osd-border --osd-back-color --osd-shadow-color --osd-font --osd-font-size --osd-border-size --osd-margin-x --osd-margin-y --osd-shadow-offset --osd-spacing --sub-scale The font size is now specified in pixels as it would be rendered on a window with a height of 720 pixels. OSD and subtitles are always scaled with the window height, so specifying or expecting an absolute font size doesn't make sense. Such scaled pixel units are used to specify font border etc. as well. (Note: the font size is directly passed to libass. How the fonts are actually rasterized is outside of our control, but in theory ASS font sizes map to "script" pixels and then are scaled to screen size.) The default settings should be about the same, with slight difference due to rounding to the new scales. The OSD and subtitle fonts are not separately configurable. It has limited use and would double the number of newly added options, which would be more confusing than helpful. It could be easily added later, should the need arise. Other small details that change: - ASS_Style.Encoding is not set to -1 for subs anymore (assuming subs use VSFilter direction in -no-ass mode too) - use a different WrapStyle for OSD - ASS forced styles are not applied to OSD
2012-11-17 19:56:45 +00:00
float sub_scale;
sub: reimplement -spugauss as --sub-gauss Apparently the -spugauss option was popular. The code originally implementing this is gone (scaler stuff in spudec.c). Reimplement it using libswscale to scale and blur image subtitles if the --sub-gauss option is set. The code does some rather lazy padding to allow the blur to spread pixels past the original image bounding box. (This problem exists with normal bilinear scaling too, but is barely noticable.) Technically, this doesn't just blur subtitles, but anything RGBA (or indexed) that enters the OSD rendering path. But only image subtitles produce these OSD formats currently, so no explicit check is done to prevent blurring in other cases.
2012-11-24 23:06:16 +00:00
float sub_gauss;
sub: add --sub-gray option to display image subs in grayscale MPlayer/mplayer2 still show DVD subtitles in gray. Depending on who you ask, this can be considered a bug or a feature. Include rendering in gray as explicit feature, so the user can decide what is better. This affects all indexed sub bitmaps entering the OSD rendering path. Currently, this means all image subs are affected by this option, but nothing else.
2012-11-25 22:32:35 +00:00
int sub_gray;
options: Move ass_enabled to options struct
2009-12-02 15:36:59 +00:00
int ass_enabled;
options: move libass-related options to struct
2011-09-03 10:47:56 +00:00
float ass_line_spacing;
int ass_use_margins;
sub: mess with styling defaults, change --ass-use-margins behavior Now --ass-use-margins doesn't apply to normal subtitles anymore. This is probably the inverse from the mpv behavior users expected so far, and thus a breaking change, so rename the option, that the user at least has a chance to lookup the option and decide whether the new behavior is wanted or not. The basic idea here is: - plain text subtitles should have a certain useful defalt behavior, like actually using margins - ASS subtitles should never be broken by default - ASS subtitles should look and behave like plaintext subtitles if the --ass-style-override=force option is used This also subtly changes --sub-scale-with-window and adds the --ass- scale-with-window option. Since this one isn't so important, don't bother with compatibility.
2015-02-16 19:04:15 +00:00
int sub_use_margins;
options, subs: add --ass-vsfilter-aspect-compat Add option --ass-vsfilter-aspect-compat and corresponding property ass_vsfilter_aspect_compat. The setting controls whether to enable the emulation of traditional VSFilter behavior where subtitles are stretched if the video is anamorphic (previously always enabled for native SSA/ASS subtitles). Enabled by default. Add 'V' as a new default keybinding to toggle the property.
2011-08-04 19:47:36 +00:00
int ass_vsfilter_aspect_compat;
sd_add: add terrible hack for (xy-)vsfilter compatibility Much has been said about this topic, we don't need to say even more. See additions to options.rst.
2013-07-14 23:48:25 +00:00
int ass_vsfilter_color_compat;
sd_ass: scale blur by original video size if requested
2013-06-30 16:46:29 +00:00
int ass_vsfilter_blur_compat;
options: move libass-related options to struct
2011-09-03 10:47:56 +00:00
int use_embedded_fonts;
subs: fix per-file --ass-force-style The --ass-force-style option was only applied when the main libass library handle was created. Thus any per-file option changes later had no effect. Do the ass_set_style_overrides() call in per-file initialization instead so that possible changes will be applied. Also move the option variable to the option struct. Current libass will crash (usually) if you set style overrides to a nonempty value, then an empty one. It'll be easier to trigger this bug after this commit, but the problem is not on mplayer2 side. The fix is trivial so hopefully there will be a fixed libass soon.
2011-07-23 02:13:25 +00:00
char **ass_force_style_list;
options: move libass-related options to struct
2011-09-03 10:47:56 +00:00
char *ass_styles_file;
sub: add --ass-style-override option to disable style overrides There are a number of options which modify ASS subtitle rendering. Most of these do things that can interfere with the styling done by subtitle scripts, resulting in incorrect rendering. Add the --ass-style-override option to make it easy to disable all overrides. This helps trouble- shooting, and makes it more practical to use the override features. (You can simply toggle the ass-style-override property at runtime, should one of the style override options break subtitle rendering at a certain point.) This mainly affects whether most --ass-* options are applied, as well as --sub-pos. Some things, like explicit style overrides loaded with --ass-force-style, can't be changed at runtime using the ass-style-override property.
2012-10-11 00:23:29 +00:00
int ass_style_override;
options: move libass-related options to struct
2011-09-03 10:47:56 +00:00
int ass_hinting;
options: allow selecting the libass shaper I'm using the word "languages" instead of "scripts" in the manpage, but I think that's easier to understand with a smaller amount of descriptions.
2013-09-25 19:42:29 +00:00
int ass_shaper;
sub: add option to workaround broken mkv files See additions to options.rst.
2014-08-14 21:59:35 +00:00
int sub_clear_on_seek;
video: different way to enable hardware decoding, add software fallback Deprecate the hardware specific video codec entries (like ffh264vdpau). Replace them with the --hwdec switch, which requests that a specific hardware decoding API should be used. The codecs.conf entries will be removed at a later time, but for now they are useful for testing and compatibility. Instead of --vc=ffh264vdpau, --hwdec=vdpau should be used. Add a fallback if hardware decoding fails. Most hardware decoders (including vdpau) support only a subset of h264, and having such a fallback is supposed to enable a better user experience.
2012-12-11 17:16:42 +00:00
int hwdec_api;
video: add --hwdec-codecs option to whitelist codecs for hw decoding
2013-05-03 19:00:05 +00:00
char *hwdec_codecs;
videotoolbox: make decoder format customizable Because apparently there's no ideal universally working format. The weird OpenGL texture format for kCVPixelFormatType_32BGRA is from: http://stackoverflow.com/questions/22077544/draw-an-iosurface-to-an-opengl-context (Which apparently got it from the linked Apple example code.)
2015-11-17 20:07:41 +00:00
int videotoolbox_format;
video: different way to enable hardware decoding, add software fallback Deprecate the hardware specific video codec entries (like ffh264vdpau). Replace them with the --hwdec switch, which requests that a specific hardware decoding API should be used. The codecs.conf entries will be removed at a later time, but for now they are useful for testing and compatibility. Instead of --vc=ffh264vdpau, --hwdec=vdpau should be used. Add a fallback if hardware decoding fails. Most hardware decoders (including vdpau) support only a subset of h264, and having such a fallback is supposed to enable a better user experience.
2012-12-11 17:16:42 +00:00
win32: implement --priority differently Does anyone actually use this? For now, update it, because it's the only case left where an option points to a global variable (and not a struct offset).
2014-06-11 22:34:20 +00:00
int w32_priority;
options: move network related options to MPOpts
2013-12-22 12:11:22 +00:00
int network_cookies_enabled;
char *network_cookies_file;
char *network_useragent;
char *network_referrer;
char **network_http_header_fields;
int network_tls_verify;
char *network_tls_ca_file;
options: add support for client certificate authentication Client certificates are supported by ffmpeg as documented here: > https://www.ffmpeg.org/ffmpeg-protocols.html#tls Signed-off-by: wm4 <wm4@nowhere>
2015-10-20 18:27:58 +00:00
char *network_tls_cert_file;
char *network_tls_key_file;
options: add --network-timeout Not quite sure if this actually works as intended. Fixes #1566.
2015-02-06 16:01:35 +00:00
double network_timeout;
options: move network related options to MPOpts
2013-12-22 12:11:22 +00:00
tv: remove global option variables Pretty much nothing changes, but using -tv-scan with suboptions doesn't work anymore (instead of "-tv-scan x" it's "-tv scan-x" now). Flat options ("-tv-scan-x") stay compatible.
2014-06-09 21:54:45 +00:00
struct tv_params *tv_params;
stream_pvr: remove global option variables
2014-06-10 18:12:19 +00:00
struct pvr_params *stream_pvr_opts;
stream_cdda: remove global option variables
2014-06-10 18:46:15 +00:00
struct cdda_params *stream_cdda_opts;
stream_dvb: remove global option variables
2014-06-10 19:44:50 +00:00
struct dvb_params *stream_dvb_opts;
stream_lavf: allow setting AVOptions with --stream-lavf-o This commit also creates a private option struct for stream_lavf.c, but since I'm lazy, I'm not moving any existing options to it.
2014-07-29 23:15:42 +00:00
struct stream_lavf_params *stream_lavf_opts;
stream_cdda: remove global option variables
2014-06-10 18:46:15 +00:00
char *cdrom_device;
Revert "Remove DVD and Bluray support" This reverts commit 4b93210e0c244a65ef10a566abed2ad25ecaf9a1. *shrug*
2014-07-14 23:49:02 +00:00
int dvd_title;
int dvd_angle;
int dvd_speed;
char *dvd_device;
int bluray_angle;
char *bluray_device;
tv: remove global option variables Pretty much nothing changes, but using -tv-scan with suboptions doesn't work anymore (instead of "-tv-scan x" it's "-tv scan-x" now). Flat options ("-tv-scan-x") stay compatible.
2014-06-09 21:54:45 +00:00
demux_mf: remove global option variables
2014-06-10 20:48:11 +00:00
double mf_fps;
char *mf_type;
demux_raw: remove global option variables
2014-06-10 21:06:42 +00:00
struct demux_rawaudio_opts *demux_rawaudio;
struct demux_rawvideo_opts *demux_rawvideo;
demux_lavf: make option struct local Similar to previous commits.
2014-06-10 23:46:20 +00:00
struct demux_lavf_opts *demux_lavf;
demux_mkv: move global options to the demuxer The options don't change, but they're now declared and used privately by demux_mkv.c. This also brings with it a minor refactor of the subpreroll seek handling - merge the code from playloop.c into demux_mkv.c. The change in demux.c is pretty much equivalent as well.
2015-04-23 17:21:17 +00:00
struct demux_mkv_opts *demux_mkv;
demux_raw: remove global option variables
2014-06-10 21:06:42 +00:00
vd_lavc: make option struct local Removes specifics from options.h and options.c, and puts everything into vd_lavc.c.
2014-06-10 23:35:39 +00:00
struct vd_lavc_params *vd_lavc_params;
ad_lavc: make option struct local Similar to previous commit.
2014-06-10 23:39:51 +00:00
struct ad_lavc_params *ad_lavc_params;
options: add option to prevent decoder audio downmixing Also rename --a52drc to --ad-lavc-ac3drc, and add --ad-lavc-o.
2013-03-31 02:24:53 +00:00
input: make option struct local Similar to previous commits. This also renames --doubleclick-time to --input-doubleclick-time, and --key-fifo-size to --input-key-fifo-size. We could keep the old names, but these options are very obscure, and renaming them seems better for consistency.
2014-06-10 23:54:03 +00:00
struct input_opts *input_opts;
encode: video encoding now supported using mencoder-like options
2012-09-14 15:51:26 +00:00
encode: make option struct local Similar to previous commits.
2014-06-11 00:04:02 +00:00
// may be NULL if encoding is not compiled-in
struct encode_opts *encode_opts;
input: implement JSON-based IPC protocol
2014-10-16 09:48:18 +00:00
char *ipc_path;
input: implement --input-file on unix using the IPC support
2014-10-15 15:48:47 +00:00
char *input_file;
Start of new option system First part of option restructuring. The aim is to move option values from a huge number of separate globals to a single non-global struct. This part adds some support for parsing option values into such struct instances, and moves one example option (fixed-vo) to the struct.
2008-03-31 03:19:29 +00:00
} MPOpts;
core: make options.c compile standalone This also removes the split between "mplayer" and "common" opts (common opts used to be shared between mencoder and mplayer).
2013-06-07 20:57:00 +00:00
extern const m_option_t mp_opts[];
extern const struct MPOpts mp_default_opts;
Start of new option system First part of option restructuring. The aim is to move option values from a huge number of separate globals to a single non-global struct. This part adds some support for parsing option values into such struct instances, and moves one example option (fixed-vo) to the struct.
2008-03-31 03:19:29 +00:00
#endif
Reference in New Issue Copy Permalink