mpv/DOCS/DXR3

98 lines
3.4 KiB
Plaintext
Raw Normal View History

How to use a Sigma Designs Hollywood Plus and/or a Creative DXR3 (by David Holm)
================================================================================
Thanks goes out to Daniel Bell for the donation of a brand new 20GB IBM
harddisk.
1. Requirements
* First of all you will need properly installed DXR3/H+ drivers, version
0.12.0 or later. You can find them at
http://dxr3.sourceforge.net/
(You only need to run "make install devices" in em8300-x.y.z/modules,
not in the root directory.)
* Run <mplayerdir>/configure and make sure that DXR3/H+ support = yes.
If you want to play files other than MPEG I highly recommend you install
libavcodec as well (Read DOCS/codecs.html for more info).
From here on compilation (at least of my code ;)) should go without any
problems.
2. Usage
-vo dxr3:<noprebuf>:<codec>:<device> Where noprebuf specifies turning off
prebuffering. This is done automatically
on Athlons. If playback is out of sync
try disabling prebuffering. If noprebuf
is left out prebuffering is enabled
(except on Athlons).
<codec> = fame/avcodec, avcodec produces
better quality output, but fame is
faster for those of you with slow
machines. The default is to use
libavcodec. Note that you need
properly installed libavcodec (read
DOCS/codecs.html)
<device> = device number to use in case
you have more than one em8300 card
Any of these options may be left out,
but they must be specified in this order
i.e. dxr3:fame works, dxr3:1 works but
dxr3:1:avcodec will not.
These new features were added by XorA,
he usually hangs out in #dxr3 on
irc.openprojects.net, let him know
you like it...
-ao oss:/dev/em8300_ma-X For audio output, where X is the device
number (0 if one card).
-ac hwac3 For digital instead of analog audio
output.
-vc mpegpes Force hardware acceleration, only works
with MPEG1/2.
-aop list=resample:fout=xxxxx If sample rate is below 44100Hz, select
either 44100Hz or 48000Hz depending on
which which one matches closest. I.e.
if the movie uses 22050Hz use 44100Hz as
44100 / 2 = 22050, if it is 24000Hz use
48000Hz as 48000 / 2 = 24000 and so on.
This does not work with digital audio
output (-ac hwac3).
Overlay
To get overlay run dxr3view that comes with the em8300 package before starting
MPlayer. You can set various options in dxr3view by pressing T while holding
the mouse cursor above the window.
MPEG-1, MPEG-2, VCD and DVD Notes
MPEG 1/2 content should now automatically be detected by MPlayer and it will
use the hardware acceleration of the DXR3 to play it. If not, you can force
it to hardware acceleration with '-vc mpegpes'. Also, if you plan to use any
postprocessing filters you must use '-vc mpeg12'.
In some instances, subtitles may not appear properly in sync with the A/V stream
when using hardware decoding ('-vc mpegpes'). This is a known bug. The em8300
will also improperly handle subtitles that are too big, and may hang for a second
or two. At this time, the only workaround is to use '-vc mpeg12' when viewing
DVDs with subtitles.
3. Contacting me
You can contact me either by e-mailing <dholm@telia.com> or by using
ICQ: 798427
Feedback, bug reports and general suggestions are appreciated (preferably
by e-mail).