mpv/common/common.h

93 lines
2.7 KiB
C
Raw Normal View History

/*
* This file is part of MPlayer.
*
* MPlayer is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* MPlayer is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License along
* with MPlayer; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
*/
#ifndef MPLAYER_MPCOMMON_H
#define MPLAYER_MPCOMMON_H
#include <stddef.h>
mplayer: turn playtree into a list, and change per-file option handling Summary: - There is no playtree anymore. It's reduced to a simple list. - Options are now always global. You can still have per-file options, but these are optional and require special syntax. - The slave command pt_step has been removed, and playlist_next and playlist_prev added. (See etc/input.conf changes.) This is a user visible incompatible change, and will break slave-mode applications. - The pt_clear slave command is renamed to playlist_clear. - Playtree entries could have multiple files. This is not the case anymore, and playlist entries have always exactly one entry. Whenever something adds more than one file (like ASX playlists or dvd:// or dvdnav:// on the command line), all files are added as separate playlist entries. Note that some of the changes are quite deep and violent. Expect regressions. The playlist parsing code in particular is of low quality. I didn't try to improve it, and merely spent to least effort necessary to keep it somehow working. (Especially ASX playlist handling.) The playtree code was complicated and bloated. It was also barely used. Most users don't even know that mplayer manages the playlist as tree, or how to use it. The most obscure features was probably specifying a tree on command line (with '{' and '}' to create/close tree nodes). It filled the player code with complexity and confused users with weird slave commands like pt_up. Replace the playtree with a simple flat playlist. Playlist parsers that actually return trees are changed to append all files to the playlist pre-order. It used to be the responsibility of the playtree code to change per-file config options. Now this is done by the player core, and the playlist code is free of such details. Options are not per-file by default anymore. This was a very obscure and complicated feature that confused even experienced users. Consider the following command line: mplayer file1.mkv file2.mkv --no-audio file3.mkv This will disable the audio for file2.mkv only, because options are per-file by default. To make the option affect all files, you're supposed to put it before the first file. This is bad, because normally you don't need per-file options. They are very rarely needed, and the only reasonable use cases I can imagine are use of the encode backend (mplayer encode branch), or for debugging. The normal use case is made harder, and the feature is perceived as bug. Even worse, correct usage is hard to explain for users. Make all options global by default. The position of an option isn't significant anymore (except for options that compensate each other, consider --shuffle --no-shuffle). One other important change is that no options are reset anymore if a new file is started. If you change settings with slave mode commands, they will not be changed by playing a new file. (Exceptions include settings that are too file specific, like audio/subtitle stream selection.) There is still some need for per-file options. Debugging and encoding are use cases that profit from per-file options. Per-file profiles (as well as per-protocol and per-VO/AO options) need the implementation related mechanisms to backup and restore options when the playback file changes. Simplify the save-slot stuff, which is possible because there is no hierarchical play tree anymore. Now there's a simple backup field. Add a way to specify per-file options on command line. Example: mplayer f1.mkv -o0 --{ -o1 f2.mkv -o2 f3.mkv --} f4.mkv -o3 will have the following options per file set: f1.mkv, f4.mkv: -o0 -o3 f2.mkv, f3.mkv: -o0 -o3 -o1 -o2 The options --{ and --} start and end per-file options. All files inside the { } will be affected by the options equally (similar to how global options and multiple files are handled). When playback of a file starts, the per-file options are set according to the command line. When playback ends, the per-file options are restored to the values when playback started.
2012-07-31 19:33:26 +00:00
#include <stdlib.h>
#include <stdbool.h>
#include <stdint.h>
mplayer: turn playtree into a list, and change per-file option handling Summary: - There is no playtree anymore. It's reduced to a simple list. - Options are now always global. You can still have per-file options, but these are optional and require special syntax. - The slave command pt_step has been removed, and playlist_next and playlist_prev added. (See etc/input.conf changes.) This is a user visible incompatible change, and will break slave-mode applications. - The pt_clear slave command is renamed to playlist_clear. - Playtree entries could have multiple files. This is not the case anymore, and playlist entries have always exactly one entry. Whenever something adds more than one file (like ASX playlists or dvd:// or dvdnav:// on the command line), all files are added as separate playlist entries. Note that some of the changes are quite deep and violent. Expect regressions. The playlist parsing code in particular is of low quality. I didn't try to improve it, and merely spent to least effort necessary to keep it somehow working. (Especially ASX playlist handling.) The playtree code was complicated and bloated. It was also barely used. Most users don't even know that mplayer manages the playlist as tree, or how to use it. The most obscure features was probably specifying a tree on command line (with '{' and '}' to create/close tree nodes). It filled the player code with complexity and confused users with weird slave commands like pt_up. Replace the playtree with a simple flat playlist. Playlist parsers that actually return trees are changed to append all files to the playlist pre-order. It used to be the responsibility of the playtree code to change per-file config options. Now this is done by the player core, and the playlist code is free of such details. Options are not per-file by default anymore. This was a very obscure and complicated feature that confused even experienced users. Consider the following command line: mplayer file1.mkv file2.mkv --no-audio file3.mkv This will disable the audio for file2.mkv only, because options are per-file by default. To make the option affect all files, you're supposed to put it before the first file. This is bad, because normally you don't need per-file options. They are very rarely needed, and the only reasonable use cases I can imagine are use of the encode backend (mplayer encode branch), or for debugging. The normal use case is made harder, and the feature is perceived as bug. Even worse, correct usage is hard to explain for users. Make all options global by default. The position of an option isn't significant anymore (except for options that compensate each other, consider --shuffle --no-shuffle). One other important change is that no options are reset anymore if a new file is started. If you change settings with slave mode commands, they will not be changed by playing a new file. (Exceptions include settings that are too file specific, like audio/subtitle stream selection.) There is still some need for per-file options. Debugging and encoding are use cases that profit from per-file options. Per-file profiles (as well as per-protocol and per-VO/AO options) need the implementation related mechanisms to backup and restore options when the playback file changes. Simplify the save-slot stuff, which is possible because there is no hierarchical play tree anymore. Now there's a simple backup field. Add a way to specify per-file options on command line. Example: mplayer f1.mkv -o0 --{ -o1 f2.mkv -o2 f3.mkv --} f4.mkv -o3 will have the following options per file set: f1.mkv, f4.mkv: -o0 -o3 f2.mkv, f3.mkv: -o0 -o3 -o1 -o2 The options --{ and --} start and end per-file options. All files inside the { } will be affected by the options equally (similar to how global options and multiple files are handled). When playback of a file starts, the per-file options are set according to the command line. When playback ends, the per-file options are restored to the values when playback started.
2012-07-31 19:33:26 +00:00
#include "osdep/compiler.h"
2013-12-17 01:18:16 +00:00
#include "talloc.h"
// double should be able to represent this exactly
#define MP_NOPTS_VALUE (-0x1p+63)
video: decouple internal pixel formats from FourCCs mplayer's video chain traditionally used FourCCs for pixel formats. For example, it used IMGFMT_YV12 for 4:2:0 YUV, which was defined to the string 'YV12' interpreted as unsigned int. Additionally, it used to encode information into the numeric values of some formats. The RGB formats had their bit depth and endian encoded into the least significant byte. Extended planar formats (420P10 etc.) had chroma shift, endian, and component bit depth encoded. (This has been removed in recent commits.) Replace the FourCC mess with a simple enum. Remove all the redundant formats like YV12/I420/IYUV. Replace some image format names by something more intuitive, most importantly IMGFMT_YV12 -> IMGFMT_420P. Add img_fourcc.h, which contains the old IDs for code that actually uses FourCCs. Change the way demuxers, that output raw video, identify the video format: they set either MP_FOURCC_RAWVIDEO or MP_FOURCC_IMGFMT to request the rawvideo decoder, and sh_video->imgfmt specifies the pixel format. Like the previous hack, this is supposed to avoid the need for a complete codecs.cfg entry per format, or other lookup tables. (Note that the RGB raw video FourCCs mostly rely on ffmpeg's mappings for NUT raw video, but this is still considered better than adding a raw video decoder - even if trivial, it would be full of annoying lookup tables.) The TV code has not been tested. Some corrective changes regarding endian and other image format flags creep in.
2012-12-23 19:03:30 +00:00
#define MP_CONCAT_(a, b) a ## b
#define MP_CONCAT(a, b) MP_CONCAT_(a, b)
#define ROUND(x) ((int)((x) < 0 ? (x) - 0.5 : (x) + 0.5))
#define MPMAX(a, b) ((a) > (b) ? (a) : (b))
#define MPMIN(a, b) ((a) > (b) ? (b) : (a))
#define MPCLAMP(a, min, max) (((a) < (min)) ? (min) : (((a) > (max)) ? (max) : (a)))
#define MPSWAP(type, a, b) \
do { type SWAP_tmp = b; b = a; a = SWAP_tmp; } while (0)
#define MP_ARRAY_SIZE(s) (sizeof(s) / sizeof((s)[0]))
// align must be a power of two (align >= 1), x >= 0
#define MP_ALIGN_UP(x, align) (((x) + (align) - 1) & ~((align) - 1))
#define MP_ALIGN_DOWN(x, align) ((x) & ~((align) - 1))
core: redo how codecs are mapped, remove codecs.conf Use codec names instead of FourCCs to identify codecs. Rewrite how codecs are selected and initialized. Now each decoder exports a list of decoders (and the codec it supports) via add_decoders(). The order matters, and the first decoder for a given decoder is preferred over the other decoders. E.g. all ad_mpg123 decoders are preferred over ad_lavc, because it comes first in the mpcodecs_ad_drivers array. Likewise, decoders within ad_lavc that are enumerated first by libavcodec (using av_codec_next()) are preferred. (This is actually critical to select h264 software decoding by default instead of vdpau. libavcodec and ffmpeg/avconv use the same method to select decoders by default, so we hope this is sane.) The codec names follow libavcodec's codec names as defined by AVCodecDescriptor.name (see libavcodec/codec_desc.c). Some decoders have names different from the canonical codec name. The AVCodecDescriptor API is relatively new, so we need a compatibility layer for older libavcodec versions for codec names that are referenced internally, and which are different from the decoder name. (Add a configure check for that, because checking versions is getting way too messy.) demux/codec_tags.c is generated from the former codecs.conf (minus "special" decoders like vdpau, and excluding the mappings that are the same as the mappings libavformat's exported RIFF tables). It contains all the mappings from FourCCs to codec name. This is needed for demux_mkv, demux_mpg, demux_avi and demux_asf. demux_lavf will set the codec as determined by libavformat, while the other demuxers have to do this on their own, using the mp_set_audio/video_codec_from_tag() functions. Note that the sh_audio/video->format members don't uniquely identify the codec anymore, and sh->codec takes over this role. Replace the --ac/--vc/--afm/--vfm with new --vd/--ad options, which provide cover the functionality of the removed switched. Note: there's no CODECS_FLAG_FLIP flag anymore. This means some obscure container/video combinations (e.g. the sample Film_200_zygo_pro.mov) are played flipped. ffplay/avplay doesn't handle this properly either, so we don't care and blame ffmeg/libav instead.
2013-02-09 14:15:19 +00:00
#define CONTROL_OK 1
#define CONTROL_TRUE 1
#define CONTROL_FALSE 0
#define CONTROL_UNKNOWN -1
#define CONTROL_ERROR -2
#define CONTROL_NA -3
enum stream_type {
STREAM_VIDEO,
STREAM_AUDIO,
STREAM_SUB,
STREAM_TYPE_COUNT,
};
extern const char *mpv_version;
extern const char *mpv_builddate;
char *mp_format_time(double time, bool fractions);
char *mp_format_time_fmt(const char *fmt, double time);
2012-10-25 17:37:36 +00:00
struct mp_rect {
int x0, y0;
int x1, y1;
};
2014-03-07 11:46:22 +00:00
#define mp_rect_w(r) ((r).x1 - (r).x0)
#define mp_rect_h(r) ((r).y1 - (r).y0)
void mp_rect_union(struct mp_rect *rc, const struct mp_rect *src);
bool mp_rect_intersection(struct mp_rect *rc, const struct mp_rect *rc2);
int mp_snprintf_cat(char *str, size_t size, const char *format, ...)
PRINTF_ATTRIBUTE(3, 4);
struct bstr;
void mp_append_utf8_bstr(void *talloc_ctx, struct bstr *buf, uint32_t codepoint);
bool mp_append_escaped_string_noalloc(void *talloc_ctx, struct bstr *dst,
struct bstr *src);
bool mp_append_escaped_string(void *talloc_ctx, struct bstr *dst,
struct bstr *src);
#endif /* MPLAYER_MPCOMMON_H */