EDL: add support for new EDL file format
The timeline code previously added to support Matroska ordered
chapters allows constructing a playback timeline from segments picked
from multiple source files. Add support for a new EDL format to make
this machinery available for use with file formats other than Matroska
and in a manner easier to use than creating files with ordered
chapters.
Unlike the old -edl option which specifies an additional file with
edits to apply to the video file given as the main argument, the new
EDL format is used by giving only the EDL file as the file to play;
that file then contains the filename(s) to use as source files where
actual video segments come from. Filename paths in the EDL file are
ignored. Currently the source files are only searched for in the
directory of the EDL file; support for a search path option will
likely be added in the future.
Format of the EDL files
The first line in the file must be "mplayer EDL file, version 2".
The rest of the lines belong to one of these classes:
1) lines specifying source files
2) empty lines
3) lines specifying timeline segments.
Lines beginning with '<' specify source files. These lines first
contain an identifier used to refer to the source file later, then the
filename separated by whitespace. The identifier must start with a
letter. Filenames that start or end with whitespace or contain
newlines are not supported.
On other lines '#' characters delimit comments. Lines that contain
only whitespace after comments have been removed are ignored.
Timeline segments must appear in the file in chronological order. Each
segment has the following information associated with it:
- duration
- output start time
- output end time (= output start time + duration)
- source id (specifies the file the content of the segment comes from)
- source start time (timestamp in the source file)
- source end time (= source start time + duration)
The output timestamps must form a continuous timeline from 0 to the
end of the last segment, such that each new segment starts from the
time the previous one ends at. Source files and times may change
arbitrarily between segments.
The general format for lines specifying timeline segments is
[output time info] source_id [source time info]
source_id must be an identifier defined on a '<' line. Both the time
info parts consists of zero or more of the following elements:
1) timestamp
2) -timestamp
3) +duration
4) *
5) -*
, where "timestamp" and "duration" are decimal numbers (computations
are done with nanosecond precision). Whitespace around "+" and "-" is
optional. 1) and 2) specify start and end time of the segment on
output or source side. 3) specifies duration; the semantics are the
same whether this appears on output or source side. 4) and 5) are
ignored on the output side (they're always implicitly assumed). On the
source side 4) specifies that the segment starts where the previous
segment _using this source_ ended; if there was no previous segment
time 0 is used. 5) specifies that the segment ends where the next
segment using this source starts.
Redundant information may be omitted. It will be filled in using the
following rules:
- output start for first segment is 0
- two of [output start, output end, duration] imply third
- two of [source start, source end, duration] imply third
- output start = output end of previous segment
- output end = output start of next segment
- if "*", source start = source end of earlier segment
- if "-*", source end = source start of a later segment
As a special rule, a last zero-duration segment without a source
specification may appear. This will produce no corresponding segment
in the resulting timeline, but can be used as syntax to specify the
end time of the timeline (with effect equal to adding -time on the
previous line).
Examples:
----- begin -----
mplayer EDL file, version 2
< id1 filename
0 id1 123
100 id1 456
200 id1 789
300
----- end -----
All segments come from the source file "filename". First segment
(output time 0-100) comes from time 123-223, second 456-556, third
789-889.
----- begin -----
mplayer EDL file, version 2
< f filename
f 60-120
f 600-660
f 30- 90
----- end -----
Play first seconds 60-120 from the file, then 600-660, then 30-90.
----- begin -----
mplayer EDL file, version 2
< id1 filename1
< id2 filename2
+10 id1 *
+10 id2 *
+10 id1 *
+10 id2 *
+10 id1 *
+10 id2 *
----- end -----
This plays time 0-10 from filename1, then 0-10 from filename1, then
10-20 from filename1, then 10-20 from filename2, then 20-30 from
filename1, then 20-30 from filename2.
----- begin -----
mplayer EDL file, version 2
< t1 filename1
< t2 filename2
t1 * +2 # segment 1
+2 t2 100 # segment 2
t1 * # segment 3
t2 *-* # segment 4
t1 3 -* # segment 5
+0.111111 t2 102.5 # segment 6
7.37 t1 5 +1 # segment 7
----- end -----
This rather pathological example illustrates the rules for filling in
implied data. All the values can be determined by recursively applying
the rules given above, and the full end result is this:
+2 0-2 t1 0-2 # segment 1
+2 2-4 t2 100-102 # segment 2
+0.758889 4-4.758889 t1 2-2.758889 # segment 3
+0.5 4.4758889-5.258889 t2 102-102.5 # segment 4
+2 5.258889-7.258889 t1 3-5 # segment 5
+0.111111 7.258889-7.37 t2 102.5-102.611111 # segment 6
+1 7.37-8.37 t1 5-6 # segment 7
2011-02-14 11:05:35 +00:00
|
|
|
/*
|
2013-07-12 20:12:02 +00:00
|
|
|
* Original author: Uoti Urpala
|
|
|
|
*
|
2015-04-13 07:36:54 +00:00
|
|
|
* This file is part of mpv.
|
|
|
|
*
|
Relicense some non-MPlayer source files to LGPL 2.1 or later
This covers source files which were added in mplayer2 and mpv times
only, and where all code is covered by LGPL relicensing agreements.
There are probably more files to which this applies, but I'm being
conservative here.
A file named ao_sdl.c exists in MPlayer too, but the mpv one is a
complete rewrite, and was added some time after the original ao_sdl.c
was removed. The same applies to vo_sdl.c, for which the SDL2 API is
radically different in addition (MPlayer supports SDL 1.2 only).
common.c contains only code written by me. But common.h is a strange
case: although it originally was named mp_common.h and exists in MPlayer
too, by now it contains only definitions written by uau and me. The
exceptions are the CONTROL_ defines - thus not changing the license of
common.h yet.
codec_tags.c contained once large tables generated from MPlayer's
codecs.conf, but all of these tables were removed.
From demux_playlist.c I'm removing a code fragment from someone who was
not asked; this probably could be done later (see commit 15dccc37).
misc.c is a bit complicated to reason about (it was split off mplayer.c
and thus contains random functions out of this file), but actually all
functions have been added post-MPlayer. Except get_relative_time(),
which was written by uau, but looks similar to 3 different versions of
something similar in each of the Unix/win32/OSX timer source files. I'm
not sure what that means in regards to copyright, so I've just moved it
into another still-GPL source file for now.
screenshot.c once had some minor parts of MPlayer's vf_screenshot.c, but
they're all gone.
2016-01-19 17:36:06 +00:00
|
|
|
* mpv is free software; you can redistribute it and/or
|
|
|
|
* modify it under the terms of the GNU Lesser General Public
|
|
|
|
* License as published by the Free Software Foundation; either
|
|
|
|
* version 2.1 of the License, or (at your option) any later version.
|
EDL: add support for new EDL file format
The timeline code previously added to support Matroska ordered
chapters allows constructing a playback timeline from segments picked
from multiple source files. Add support for a new EDL format to make
this machinery available for use with file formats other than Matroska
and in a manner easier to use than creating files with ordered
chapters.
Unlike the old -edl option which specifies an additional file with
edits to apply to the video file given as the main argument, the new
EDL format is used by giving only the EDL file as the file to play;
that file then contains the filename(s) to use as source files where
actual video segments come from. Filename paths in the EDL file are
ignored. Currently the source files are only searched for in the
directory of the EDL file; support for a search path option will
likely be added in the future.
Format of the EDL files
The first line in the file must be "mplayer EDL file, version 2".
The rest of the lines belong to one of these classes:
1) lines specifying source files
2) empty lines
3) lines specifying timeline segments.
Lines beginning with '<' specify source files. These lines first
contain an identifier used to refer to the source file later, then the
filename separated by whitespace. The identifier must start with a
letter. Filenames that start or end with whitespace or contain
newlines are not supported.
On other lines '#' characters delimit comments. Lines that contain
only whitespace after comments have been removed are ignored.
Timeline segments must appear in the file in chronological order. Each
segment has the following information associated with it:
- duration
- output start time
- output end time (= output start time + duration)
- source id (specifies the file the content of the segment comes from)
- source start time (timestamp in the source file)
- source end time (= source start time + duration)
The output timestamps must form a continuous timeline from 0 to the
end of the last segment, such that each new segment starts from the
time the previous one ends at. Source files and times may change
arbitrarily between segments.
The general format for lines specifying timeline segments is
[output time info] source_id [source time info]
source_id must be an identifier defined on a '<' line. Both the time
info parts consists of zero or more of the following elements:
1) timestamp
2) -timestamp
3) +duration
4) *
5) -*
, where "timestamp" and "duration" are decimal numbers (computations
are done with nanosecond precision). Whitespace around "+" and "-" is
optional. 1) and 2) specify start and end time of the segment on
output or source side. 3) specifies duration; the semantics are the
same whether this appears on output or source side. 4) and 5) are
ignored on the output side (they're always implicitly assumed). On the
source side 4) specifies that the segment starts where the previous
segment _using this source_ ended; if there was no previous segment
time 0 is used. 5) specifies that the segment ends where the next
segment using this source starts.
Redundant information may be omitted. It will be filled in using the
following rules:
- output start for first segment is 0
- two of [output start, output end, duration] imply third
- two of [source start, source end, duration] imply third
- output start = output end of previous segment
- output end = output start of next segment
- if "*", source start = source end of earlier segment
- if "-*", source end = source start of a later segment
As a special rule, a last zero-duration segment without a source
specification may appear. This will produce no corresponding segment
in the resulting timeline, but can be used as syntax to specify the
end time of the timeline (with effect equal to adding -time on the
previous line).
Examples:
----- begin -----
mplayer EDL file, version 2
< id1 filename
0 id1 123
100 id1 456
200 id1 789
300
----- end -----
All segments come from the source file "filename". First segment
(output time 0-100) comes from time 123-223, second 456-556, third
789-889.
----- begin -----
mplayer EDL file, version 2
< f filename
f 60-120
f 600-660
f 30- 90
----- end -----
Play first seconds 60-120 from the file, then 600-660, then 30-90.
----- begin -----
mplayer EDL file, version 2
< id1 filename1
< id2 filename2
+10 id1 *
+10 id2 *
+10 id1 *
+10 id2 *
+10 id1 *
+10 id2 *
----- end -----
This plays time 0-10 from filename1, then 0-10 from filename1, then
10-20 from filename1, then 10-20 from filename2, then 20-30 from
filename1, then 20-30 from filename2.
----- begin -----
mplayer EDL file, version 2
< t1 filename1
< t2 filename2
t1 * +2 # segment 1
+2 t2 100 # segment 2
t1 * # segment 3
t2 *-* # segment 4
t1 3 -* # segment 5
+0.111111 t2 102.5 # segment 6
7.37 t1 5 +1 # segment 7
----- end -----
This rather pathological example illustrates the rules for filling in
implied data. All the values can be determined by recursively applying
the rules given above, and the full end result is this:
+2 0-2 t1 0-2 # segment 1
+2 2-4 t2 100-102 # segment 2
+0.758889 4-4.758889 t1 2-2.758889 # segment 3
+0.5 4.4758889-5.258889 t2 102-102.5 # segment 4
+2 5.258889-7.258889 t1 3-5 # segment 5
+0.111111 7.258889-7.37 t2 102.5-102.611111 # segment 6
+1 7.37-8.37 t1 5-6 # segment 7
2011-02-14 11:05:35 +00:00
|
|
|
*
|
2015-04-13 07:36:54 +00:00
|
|
|
* mpv is distributed in the hope that it will be useful,
|
EDL: add support for new EDL file format
The timeline code previously added to support Matroska ordered
chapters allows constructing a playback timeline from segments picked
from multiple source files. Add support for a new EDL format to make
this machinery available for use with file formats other than Matroska
and in a manner easier to use than creating files with ordered
chapters.
Unlike the old -edl option which specifies an additional file with
edits to apply to the video file given as the main argument, the new
EDL format is used by giving only the EDL file as the file to play;
that file then contains the filename(s) to use as source files where
actual video segments come from. Filename paths in the EDL file are
ignored. Currently the source files are only searched for in the
directory of the EDL file; support for a search path option will
likely be added in the future.
Format of the EDL files
The first line in the file must be "mplayer EDL file, version 2".
The rest of the lines belong to one of these classes:
1) lines specifying source files
2) empty lines
3) lines specifying timeline segments.
Lines beginning with '<' specify source files. These lines first
contain an identifier used to refer to the source file later, then the
filename separated by whitespace. The identifier must start with a
letter. Filenames that start or end with whitespace or contain
newlines are not supported.
On other lines '#' characters delimit comments. Lines that contain
only whitespace after comments have been removed are ignored.
Timeline segments must appear in the file in chronological order. Each
segment has the following information associated with it:
- duration
- output start time
- output end time (= output start time + duration)
- source id (specifies the file the content of the segment comes from)
- source start time (timestamp in the source file)
- source end time (= source start time + duration)
The output timestamps must form a continuous timeline from 0 to the
end of the last segment, such that each new segment starts from the
time the previous one ends at. Source files and times may change
arbitrarily between segments.
The general format for lines specifying timeline segments is
[output time info] source_id [source time info]
source_id must be an identifier defined on a '<' line. Both the time
info parts consists of zero or more of the following elements:
1) timestamp
2) -timestamp
3) +duration
4) *
5) -*
, where "timestamp" and "duration" are decimal numbers (computations
are done with nanosecond precision). Whitespace around "+" and "-" is
optional. 1) and 2) specify start and end time of the segment on
output or source side. 3) specifies duration; the semantics are the
same whether this appears on output or source side. 4) and 5) are
ignored on the output side (they're always implicitly assumed). On the
source side 4) specifies that the segment starts where the previous
segment _using this source_ ended; if there was no previous segment
time 0 is used. 5) specifies that the segment ends where the next
segment using this source starts.
Redundant information may be omitted. It will be filled in using the
following rules:
- output start for first segment is 0
- two of [output start, output end, duration] imply third
- two of [source start, source end, duration] imply third
- output start = output end of previous segment
- output end = output start of next segment
- if "*", source start = source end of earlier segment
- if "-*", source end = source start of a later segment
As a special rule, a last zero-duration segment without a source
specification may appear. This will produce no corresponding segment
in the resulting timeline, but can be used as syntax to specify the
end time of the timeline (with effect equal to adding -time on the
previous line).
Examples:
----- begin -----
mplayer EDL file, version 2
< id1 filename
0 id1 123
100 id1 456
200 id1 789
300
----- end -----
All segments come from the source file "filename". First segment
(output time 0-100) comes from time 123-223, second 456-556, third
789-889.
----- begin -----
mplayer EDL file, version 2
< f filename
f 60-120
f 600-660
f 30- 90
----- end -----
Play first seconds 60-120 from the file, then 600-660, then 30-90.
----- begin -----
mplayer EDL file, version 2
< id1 filename1
< id2 filename2
+10 id1 *
+10 id2 *
+10 id1 *
+10 id2 *
+10 id1 *
+10 id2 *
----- end -----
This plays time 0-10 from filename1, then 0-10 from filename1, then
10-20 from filename1, then 10-20 from filename2, then 20-30 from
filename1, then 20-30 from filename2.
----- begin -----
mplayer EDL file, version 2
< t1 filename1
< t2 filename2
t1 * +2 # segment 1
+2 t2 100 # segment 2
t1 * # segment 3
t2 *-* # segment 4
t1 3 -* # segment 5
+0.111111 t2 102.5 # segment 6
7.37 t1 5 +1 # segment 7
----- end -----
This rather pathological example illustrates the rules for filling in
implied data. All the values can be determined by recursively applying
the rules given above, and the full end result is this:
+2 0-2 t1 0-2 # segment 1
+2 2-4 t2 100-102 # segment 2
+0.758889 4-4.758889 t1 2-2.758889 # segment 3
+0.5 4.4758889-5.258889 t2 102-102.5 # segment 4
+2 5.258889-7.258889 t1 3-5 # segment 5
+0.111111 7.258889-7.37 t2 102.5-102.611111 # segment 6
+1 7.37-8.37 t1 5-6 # segment 7
2011-02-14 11:05:35 +00:00
|
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
Relicense some non-MPlayer source files to LGPL 2.1 or later
This covers source files which were added in mplayer2 and mpv times
only, and where all code is covered by LGPL relicensing agreements.
There are probably more files to which this applies, but I'm being
conservative here.
A file named ao_sdl.c exists in MPlayer too, but the mpv one is a
complete rewrite, and was added some time after the original ao_sdl.c
was removed. The same applies to vo_sdl.c, for which the SDL2 API is
radically different in addition (MPlayer supports SDL 1.2 only).
common.c contains only code written by me. But common.h is a strange
case: although it originally was named mp_common.h and exists in MPlayer
too, by now it contains only definitions written by uau and me. The
exceptions are the CONTROL_ defines - thus not changing the license of
common.h yet.
codec_tags.c contained once large tables generated from MPlayer's
codecs.conf, but all of these tables were removed.
From demux_playlist.c I'm removing a code fragment from someone who was
not asked; this probably could be done later (see commit 15dccc37).
misc.c is a bit complicated to reason about (it was split off mplayer.c
and thus contains random functions out of this file), but actually all
functions have been added post-MPlayer. Except get_relative_time(),
which was written by uau, but looks similar to 3 different versions of
something similar in each of the Unix/win32/OSX timer source files. I'm
not sure what that means in regards to copyright, so I've just moved it
into another still-GPL source file for now.
screenshot.c once had some minor parts of MPlayer's vf_screenshot.c, but
they're all gone.
2016-01-19 17:36:06 +00:00
|
|
|
* GNU Lesser General Public License for more details.
|
EDL: add support for new EDL file format
The timeline code previously added to support Matroska ordered
chapters allows constructing a playback timeline from segments picked
from multiple source files. Add support for a new EDL format to make
this machinery available for use with file formats other than Matroska
and in a manner easier to use than creating files with ordered
chapters.
Unlike the old -edl option which specifies an additional file with
edits to apply to the video file given as the main argument, the new
EDL format is used by giving only the EDL file as the file to play;
that file then contains the filename(s) to use as source files where
actual video segments come from. Filename paths in the EDL file are
ignored. Currently the source files are only searched for in the
directory of the EDL file; support for a search path option will
likely be added in the future.
Format of the EDL files
The first line in the file must be "mplayer EDL file, version 2".
The rest of the lines belong to one of these classes:
1) lines specifying source files
2) empty lines
3) lines specifying timeline segments.
Lines beginning with '<' specify source files. These lines first
contain an identifier used to refer to the source file later, then the
filename separated by whitespace. The identifier must start with a
letter. Filenames that start or end with whitespace or contain
newlines are not supported.
On other lines '#' characters delimit comments. Lines that contain
only whitespace after comments have been removed are ignored.
Timeline segments must appear in the file in chronological order. Each
segment has the following information associated with it:
- duration
- output start time
- output end time (= output start time + duration)
- source id (specifies the file the content of the segment comes from)
- source start time (timestamp in the source file)
- source end time (= source start time + duration)
The output timestamps must form a continuous timeline from 0 to the
end of the last segment, such that each new segment starts from the
time the previous one ends at. Source files and times may change
arbitrarily between segments.
The general format for lines specifying timeline segments is
[output time info] source_id [source time info]
source_id must be an identifier defined on a '<' line. Both the time
info parts consists of zero or more of the following elements:
1) timestamp
2) -timestamp
3) +duration
4) *
5) -*
, where "timestamp" and "duration" are decimal numbers (computations
are done with nanosecond precision). Whitespace around "+" and "-" is
optional. 1) and 2) specify start and end time of the segment on
output or source side. 3) specifies duration; the semantics are the
same whether this appears on output or source side. 4) and 5) are
ignored on the output side (they're always implicitly assumed). On the
source side 4) specifies that the segment starts where the previous
segment _using this source_ ended; if there was no previous segment
time 0 is used. 5) specifies that the segment ends where the next
segment using this source starts.
Redundant information may be omitted. It will be filled in using the
following rules:
- output start for first segment is 0
- two of [output start, output end, duration] imply third
- two of [source start, source end, duration] imply third
- output start = output end of previous segment
- output end = output start of next segment
- if "*", source start = source end of earlier segment
- if "-*", source end = source start of a later segment
As a special rule, a last zero-duration segment without a source
specification may appear. This will produce no corresponding segment
in the resulting timeline, but can be used as syntax to specify the
end time of the timeline (with effect equal to adding -time on the
previous line).
Examples:
----- begin -----
mplayer EDL file, version 2
< id1 filename
0 id1 123
100 id1 456
200 id1 789
300
----- end -----
All segments come from the source file "filename". First segment
(output time 0-100) comes from time 123-223, second 456-556, third
789-889.
----- begin -----
mplayer EDL file, version 2
< f filename
f 60-120
f 600-660
f 30- 90
----- end -----
Play first seconds 60-120 from the file, then 600-660, then 30-90.
----- begin -----
mplayer EDL file, version 2
< id1 filename1
< id2 filename2
+10 id1 *
+10 id2 *
+10 id1 *
+10 id2 *
+10 id1 *
+10 id2 *
----- end -----
This plays time 0-10 from filename1, then 0-10 from filename1, then
10-20 from filename1, then 10-20 from filename2, then 20-30 from
filename1, then 20-30 from filename2.
----- begin -----
mplayer EDL file, version 2
< t1 filename1
< t2 filename2
t1 * +2 # segment 1
+2 t2 100 # segment 2
t1 * # segment 3
t2 *-* # segment 4
t1 3 -* # segment 5
+0.111111 t2 102.5 # segment 6
7.37 t1 5 +1 # segment 7
----- end -----
This rather pathological example illustrates the rules for filling in
implied data. All the values can be determined by recursively applying
the rules given above, and the full end result is this:
+2 0-2 t1 0-2 # segment 1
+2 2-4 t2 100-102 # segment 2
+0.758889 4-4.758889 t1 2-2.758889 # segment 3
+0.5 4.4758889-5.258889 t2 102-102.5 # segment 4
+2 5.258889-7.258889 t1 3-5 # segment 5
+0.111111 7.258889-7.37 t2 102.5-102.611111 # segment 6
+1 7.37-8.37 t1 5-6 # segment 7
2011-02-14 11:05:35 +00:00
|
|
|
*
|
Relicense some non-MPlayer source files to LGPL 2.1 or later
This covers source files which were added in mplayer2 and mpv times
only, and where all code is covered by LGPL relicensing agreements.
There are probably more files to which this applies, but I'm being
conservative here.
A file named ao_sdl.c exists in MPlayer too, but the mpv one is a
complete rewrite, and was added some time after the original ao_sdl.c
was removed. The same applies to vo_sdl.c, for which the SDL2 API is
radically different in addition (MPlayer supports SDL 1.2 only).
common.c contains only code written by me. But common.h is a strange
case: although it originally was named mp_common.h and exists in MPlayer
too, by now it contains only definitions written by uau and me. The
exceptions are the CONTROL_ defines - thus not changing the license of
common.h yet.
codec_tags.c contained once large tables generated from MPlayer's
codecs.conf, but all of these tables were removed.
From demux_playlist.c I'm removing a code fragment from someone who was
not asked; this probably could be done later (see commit 15dccc37).
misc.c is a bit complicated to reason about (it was split off mplayer.c
and thus contains random functions out of this file), but actually all
functions have been added post-MPlayer. Except get_relative_time(),
which was written by uau, but looks similar to 3 different versions of
something similar in each of the Unix/win32/OSX timer source files. I'm
not sure what that means in regards to copyright, so I've just moved it
into another still-GPL source file for now.
screenshot.c once had some minor parts of MPlayer's vf_screenshot.c, but
they're all gone.
2016-01-19 17:36:06 +00:00
|
|
|
* You should have received a copy of the GNU Lesser General Public
|
|
|
|
* License along with mpv. If not, see <http://www.gnu.org/licenses/>.
|
EDL: add support for new EDL file format
The timeline code previously added to support Matroska ordered
chapters allows constructing a playback timeline from segments picked
from multiple source files. Add support for a new EDL format to make
this machinery available for use with file formats other than Matroska
and in a manner easier to use than creating files with ordered
chapters.
Unlike the old -edl option which specifies an additional file with
edits to apply to the video file given as the main argument, the new
EDL format is used by giving only the EDL file as the file to play;
that file then contains the filename(s) to use as source files where
actual video segments come from. Filename paths in the EDL file are
ignored. Currently the source files are only searched for in the
directory of the EDL file; support for a search path option will
likely be added in the future.
Format of the EDL files
The first line in the file must be "mplayer EDL file, version 2".
The rest of the lines belong to one of these classes:
1) lines specifying source files
2) empty lines
3) lines specifying timeline segments.
Lines beginning with '<' specify source files. These lines first
contain an identifier used to refer to the source file later, then the
filename separated by whitespace. The identifier must start with a
letter. Filenames that start or end with whitespace or contain
newlines are not supported.
On other lines '#' characters delimit comments. Lines that contain
only whitespace after comments have been removed are ignored.
Timeline segments must appear in the file in chronological order. Each
segment has the following information associated with it:
- duration
- output start time
- output end time (= output start time + duration)
- source id (specifies the file the content of the segment comes from)
- source start time (timestamp in the source file)
- source end time (= source start time + duration)
The output timestamps must form a continuous timeline from 0 to the
end of the last segment, such that each new segment starts from the
time the previous one ends at. Source files and times may change
arbitrarily between segments.
The general format for lines specifying timeline segments is
[output time info] source_id [source time info]
source_id must be an identifier defined on a '<' line. Both the time
info parts consists of zero or more of the following elements:
1) timestamp
2) -timestamp
3) +duration
4) *
5) -*
, where "timestamp" and "duration" are decimal numbers (computations
are done with nanosecond precision). Whitespace around "+" and "-" is
optional. 1) and 2) specify start and end time of the segment on
output or source side. 3) specifies duration; the semantics are the
same whether this appears on output or source side. 4) and 5) are
ignored on the output side (they're always implicitly assumed). On the
source side 4) specifies that the segment starts where the previous
segment _using this source_ ended; if there was no previous segment
time 0 is used. 5) specifies that the segment ends where the next
segment using this source starts.
Redundant information may be omitted. It will be filled in using the
following rules:
- output start for first segment is 0
- two of [output start, output end, duration] imply third
- two of [source start, source end, duration] imply third
- output start = output end of previous segment
- output end = output start of next segment
- if "*", source start = source end of earlier segment
- if "-*", source end = source start of a later segment
As a special rule, a last zero-duration segment without a source
specification may appear. This will produce no corresponding segment
in the resulting timeline, but can be used as syntax to specify the
end time of the timeline (with effect equal to adding -time on the
previous line).
Examples:
----- begin -----
mplayer EDL file, version 2
< id1 filename
0 id1 123
100 id1 456
200 id1 789
300
----- end -----
All segments come from the source file "filename". First segment
(output time 0-100) comes from time 123-223, second 456-556, third
789-889.
----- begin -----
mplayer EDL file, version 2
< f filename
f 60-120
f 600-660
f 30- 90
----- end -----
Play first seconds 60-120 from the file, then 600-660, then 30-90.
----- begin -----
mplayer EDL file, version 2
< id1 filename1
< id2 filename2
+10 id1 *
+10 id2 *
+10 id1 *
+10 id2 *
+10 id1 *
+10 id2 *
----- end -----
This plays time 0-10 from filename1, then 0-10 from filename1, then
10-20 from filename1, then 10-20 from filename2, then 20-30 from
filename1, then 20-30 from filename2.
----- begin -----
mplayer EDL file, version 2
< t1 filename1
< t2 filename2
t1 * +2 # segment 1
+2 t2 100 # segment 2
t1 * # segment 3
t2 *-* # segment 4
t1 3 -* # segment 5
+0.111111 t2 102.5 # segment 6
7.37 t1 5 +1 # segment 7
----- end -----
This rather pathological example illustrates the rules for filling in
implied data. All the values can be determined by recursively applying
the rules given above, and the full end result is this:
+2 0-2 t1 0-2 # segment 1
+2 2-4 t2 100-102 # segment 2
+0.758889 4-4.758889 t1 2-2.758889 # segment 3
+0.5 4.4758889-5.258889 t2 102-102.5 # segment 4
+2 5.258889-7.258889 t1 3-5 # segment 5
+0.111111 7.258889-7.37 t2 102.5-102.611111 # segment 6
+1 7.37-8.37 t1 5-6 # segment 7
2011-02-14 11:05:35 +00:00
|
|
|
*/
|
|
|
|
|
|
|
|
#include <stdlib.h>
|
|
|
|
#include <stdbool.h>
|
|
|
|
#include <string.h>
|
2015-02-17 22:48:39 +00:00
|
|
|
#include <inttypes.h>
|
|
|
|
#include <math.h>
|
EDL: add support for new EDL file format
The timeline code previously added to support Matroska ordered
chapters allows constructing a playback timeline from segments picked
from multiple source files. Add support for a new EDL format to make
this machinery available for use with file formats other than Matroska
and in a manner easier to use than creating files with ordered
chapters.
Unlike the old -edl option which specifies an additional file with
edits to apply to the video file given as the main argument, the new
EDL format is used by giving only the EDL file as the file to play;
that file then contains the filename(s) to use as source files where
actual video segments come from. Filename paths in the EDL file are
ignored. Currently the source files are only searched for in the
directory of the EDL file; support for a search path option will
likely be added in the future.
Format of the EDL files
The first line in the file must be "mplayer EDL file, version 2".
The rest of the lines belong to one of these classes:
1) lines specifying source files
2) empty lines
3) lines specifying timeline segments.
Lines beginning with '<' specify source files. These lines first
contain an identifier used to refer to the source file later, then the
filename separated by whitespace. The identifier must start with a
letter. Filenames that start or end with whitespace or contain
newlines are not supported.
On other lines '#' characters delimit comments. Lines that contain
only whitespace after comments have been removed are ignored.
Timeline segments must appear in the file in chronological order. Each
segment has the following information associated with it:
- duration
- output start time
- output end time (= output start time + duration)
- source id (specifies the file the content of the segment comes from)
- source start time (timestamp in the source file)
- source end time (= source start time + duration)
The output timestamps must form a continuous timeline from 0 to the
end of the last segment, such that each new segment starts from the
time the previous one ends at. Source files and times may change
arbitrarily between segments.
The general format for lines specifying timeline segments is
[output time info] source_id [source time info]
source_id must be an identifier defined on a '<' line. Both the time
info parts consists of zero or more of the following elements:
1) timestamp
2) -timestamp
3) +duration
4) *
5) -*
, where "timestamp" and "duration" are decimal numbers (computations
are done with nanosecond precision). Whitespace around "+" and "-" is
optional. 1) and 2) specify start and end time of the segment on
output or source side. 3) specifies duration; the semantics are the
same whether this appears on output or source side. 4) and 5) are
ignored on the output side (they're always implicitly assumed). On the
source side 4) specifies that the segment starts where the previous
segment _using this source_ ended; if there was no previous segment
time 0 is used. 5) specifies that the segment ends where the next
segment using this source starts.
Redundant information may be omitted. It will be filled in using the
following rules:
- output start for first segment is 0
- two of [output start, output end, duration] imply third
- two of [source start, source end, duration] imply third
- output start = output end of previous segment
- output end = output start of next segment
- if "*", source start = source end of earlier segment
- if "-*", source end = source start of a later segment
As a special rule, a last zero-duration segment without a source
specification may appear. This will produce no corresponding segment
in the resulting timeline, but can be used as syntax to specify the
end time of the timeline (with effect equal to adding -time on the
previous line).
Examples:
----- begin -----
mplayer EDL file, version 2
< id1 filename
0 id1 123
100 id1 456
200 id1 789
300
----- end -----
All segments come from the source file "filename". First segment
(output time 0-100) comes from time 123-223, second 456-556, third
789-889.
----- begin -----
mplayer EDL file, version 2
< f filename
f 60-120
f 600-660
f 30- 90
----- end -----
Play first seconds 60-120 from the file, then 600-660, then 30-90.
----- begin -----
mplayer EDL file, version 2
< id1 filename1
< id2 filename2
+10 id1 *
+10 id2 *
+10 id1 *
+10 id2 *
+10 id1 *
+10 id2 *
----- end -----
This plays time 0-10 from filename1, then 0-10 from filename1, then
10-20 from filename1, then 10-20 from filename2, then 20-30 from
filename1, then 20-30 from filename2.
----- begin -----
mplayer EDL file, version 2
< t1 filename1
< t2 filename2
t1 * +2 # segment 1
+2 t2 100 # segment 2
t1 * # segment 3
t2 *-* # segment 4
t1 3 -* # segment 5
+0.111111 t2 102.5 # segment 6
7.37 t1 5 +1 # segment 7
----- end -----
This rather pathological example illustrates the rules for filling in
implied data. All the values can be determined by recursively applying
the rules given above, and the full end result is this:
+2 0-2 t1 0-2 # segment 1
+2 2-4 t2 100-102 # segment 2
+0.758889 4-4.758889 t1 2-2.758889 # segment 3
+0.5 4.4758889-5.258889 t2 102-102.5 # segment 4
+2 5.258889-7.258889 t1 3-5 # segment 5
+0.111111 7.258889-7.37 t2 102.5-102.611111 # segment 6
+1 7.37-8.37 t1 5-6 # segment 7
2011-02-14 11:05:35 +00:00
|
|
|
|
2016-01-11 18:03:40 +00:00
|
|
|
#include "mpv_talloc.h"
|
2015-02-17 22:48:39 +00:00
|
|
|
|
2015-05-24 21:26:54 +00:00
|
|
|
#include "demux.h"
|
|
|
|
#include "timeline.h"
|
2015-02-17 22:48:39 +00:00
|
|
|
#include "common/msg.h"
|
2015-02-17 22:48:47 +00:00
|
|
|
#include "common/global.h"
|
2015-02-17 22:48:39 +00:00
|
|
|
#include "options/path.h"
|
|
|
|
#include "misc/bstr.h"
|
|
|
|
#include "common/common.h"
|
EDL: add support for new EDL file format
The timeline code previously added to support Matroska ordered
chapters allows constructing a playback timeline from segments picked
from multiple source files. Add support for a new EDL format to make
this machinery available for use with file formats other than Matroska
and in a manner easier to use than creating files with ordered
chapters.
Unlike the old -edl option which specifies an additional file with
edits to apply to the video file given as the main argument, the new
EDL format is used by giving only the EDL file as the file to play;
that file then contains the filename(s) to use as source files where
actual video segments come from. Filename paths in the EDL file are
ignored. Currently the source files are only searched for in the
directory of the EDL file; support for a search path option will
likely be added in the future.
Format of the EDL files
The first line in the file must be "mplayer EDL file, version 2".
The rest of the lines belong to one of these classes:
1) lines specifying source files
2) empty lines
3) lines specifying timeline segments.
Lines beginning with '<' specify source files. These lines first
contain an identifier used to refer to the source file later, then the
filename separated by whitespace. The identifier must start with a
letter. Filenames that start or end with whitespace or contain
newlines are not supported.
On other lines '#' characters delimit comments. Lines that contain
only whitespace after comments have been removed are ignored.
Timeline segments must appear in the file in chronological order. Each
segment has the following information associated with it:
- duration
- output start time
- output end time (= output start time + duration)
- source id (specifies the file the content of the segment comes from)
- source start time (timestamp in the source file)
- source end time (= source start time + duration)
The output timestamps must form a continuous timeline from 0 to the
end of the last segment, such that each new segment starts from the
time the previous one ends at. Source files and times may change
arbitrarily between segments.
The general format for lines specifying timeline segments is
[output time info] source_id [source time info]
source_id must be an identifier defined on a '<' line. Both the time
info parts consists of zero or more of the following elements:
1) timestamp
2) -timestamp
3) +duration
4) *
5) -*
, where "timestamp" and "duration" are decimal numbers (computations
are done with nanosecond precision). Whitespace around "+" and "-" is
optional. 1) and 2) specify start and end time of the segment on
output or source side. 3) specifies duration; the semantics are the
same whether this appears on output or source side. 4) and 5) are
ignored on the output side (they're always implicitly assumed). On the
source side 4) specifies that the segment starts where the previous
segment _using this source_ ended; if there was no previous segment
time 0 is used. 5) specifies that the segment ends where the next
segment using this source starts.
Redundant information may be omitted. It will be filled in using the
following rules:
- output start for first segment is 0
- two of [output start, output end, duration] imply third
- two of [source start, source end, duration] imply third
- output start = output end of previous segment
- output end = output start of next segment
- if "*", source start = source end of earlier segment
- if "-*", source end = source start of a later segment
As a special rule, a last zero-duration segment without a source
specification may appear. This will produce no corresponding segment
in the resulting timeline, but can be used as syntax to specify the
end time of the timeline (with effect equal to adding -time on the
previous line).
Examples:
----- begin -----
mplayer EDL file, version 2
< id1 filename
0 id1 123
100 id1 456
200 id1 789
300
----- end -----
All segments come from the source file "filename". First segment
(output time 0-100) comes from time 123-223, second 456-556, third
789-889.
----- begin -----
mplayer EDL file, version 2
< f filename
f 60-120
f 600-660
f 30- 90
----- end -----
Play first seconds 60-120 from the file, then 600-660, then 30-90.
----- begin -----
mplayer EDL file, version 2
< id1 filename1
< id2 filename2
+10 id1 *
+10 id2 *
+10 id1 *
+10 id2 *
+10 id1 *
+10 id2 *
----- end -----
This plays time 0-10 from filename1, then 0-10 from filename1, then
10-20 from filename1, then 10-20 from filename2, then 20-30 from
filename1, then 20-30 from filename2.
----- begin -----
mplayer EDL file, version 2
< t1 filename1
< t2 filename2
t1 * +2 # segment 1
+2 t2 100 # segment 2
t1 * # segment 3
t2 *-* # segment 4
t1 3 -* # segment 5
+0.111111 t2 102.5 # segment 6
7.37 t1 5 +1 # segment 7
----- end -----
This rather pathological example illustrates the rules for filling in
implied data. All the values can be determined by recursively applying
the rules given above, and the full end result is this:
+2 0-2 t1 0-2 # segment 1
+2 2-4 t2 100-102 # segment 2
+0.758889 4-4.758889 t1 2-2.758889 # segment 3
+0.5 4.4758889-5.258889 t2 102-102.5 # segment 4
+2 5.258889-7.258889 t1 3-5 # segment 5
+0.111111 7.258889-7.37 t2 102.5-102.611111 # segment 6
+1 7.37-8.37 t1 5-6 # segment 7
2011-02-14 11:05:35 +00:00
|
|
|
#include "stream/stream.h"
|
|
|
|
|
2013-11-21 14:59:00 +00:00
|
|
|
#define HEADER "# mpv EDL v0\n"
|
2013-11-19 21:23:41 +00:00
|
|
|
|
2015-02-17 22:48:39 +00:00
|
|
|
struct tl_part {
|
|
|
|
char *filename; // what is stream_open()ed
|
|
|
|
double offset; // offset into the source file
|
|
|
|
bool offset_set;
|
|
|
|
bool chapter_ts;
|
|
|
|
double length; // length of the part (-1 if rest of the file)
|
|
|
|
};
|
|
|
|
|
|
|
|
struct tl_parts {
|
|
|
|
struct tl_part *parts;
|
|
|
|
int num_parts;
|
|
|
|
};
|
|
|
|
|
2015-02-17 22:49:38 +00:00
|
|
|
struct priv {
|
|
|
|
bstr data;
|
|
|
|
};
|
|
|
|
|
2015-02-17 22:48:39 +00:00
|
|
|
// Parse a time (absolute file time or duration). Currently equivalent to a
|
|
|
|
// number. Return false on failure.
|
|
|
|
static bool parse_time(bstr str, double *out_time)
|
|
|
|
{
|
|
|
|
bstr rest;
|
|
|
|
double time = bstrtod(str, &rest);
|
|
|
|
if (!str.len || rest.len || !isfinite(time))
|
|
|
|
return false;
|
|
|
|
*out_time = time;
|
|
|
|
return true;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Returns a list of parts, or NULL on parse error.
|
|
|
|
* Syntax (without file header or URI prefix):
|
|
|
|
* url ::= <entry> ( (';' | '\n') <entry> )*
|
|
|
|
* entry ::= <param> ( <param> ',' )*
|
|
|
|
* param ::= [<string> '='] (<string> | '%' <number> '%' <bytes>)
|
|
|
|
*/
|
|
|
|
static struct tl_parts *parse_edl(bstr str)
|
|
|
|
{
|
|
|
|
struct tl_parts *tl = talloc_zero(NULL, struct tl_parts);
|
|
|
|
while (str.len) {
|
|
|
|
if (bstr_eatstart0(&str, "#"))
|
|
|
|
bstr_split_tok(str, "\n", &(bstr){0}, &str);
|
|
|
|
if (bstr_eatstart0(&str, "\n") || bstr_eatstart0(&str, ";"))
|
|
|
|
continue;
|
|
|
|
struct tl_part p = { .length = -1 };
|
|
|
|
int nparam = 0;
|
|
|
|
while (1) {
|
|
|
|
bstr name, val;
|
|
|
|
// Check if it's of the form "name=..."
|
|
|
|
int next = bstrcspn(str, "=%,;\n");
|
|
|
|
if (next > 0 && next < str.len && str.start[next] == '=') {
|
|
|
|
name = bstr_splice(str, 0, next);
|
|
|
|
str = bstr_cut(str, next + 1);
|
|
|
|
} else {
|
|
|
|
const char *names[] = {"file", "start", "length"}; // implied name
|
|
|
|
name = bstr0(nparam < 3 ? names[nparam] : "-");
|
|
|
|
}
|
|
|
|
if (bstr_eatstart0(&str, "%")) {
|
|
|
|
int len = bstrtoll(str, &str, 0);
|
|
|
|
if (!bstr_startswith0(str, "%") || (len > str.len - 1))
|
|
|
|
goto error;
|
|
|
|
val = bstr_splice(str, 1, len + 1);
|
|
|
|
str = bstr_cut(str, len + 1);
|
|
|
|
} else {
|
|
|
|
next = bstrcspn(str, ",;\n");
|
|
|
|
val = bstr_splice(str, 0, next);
|
|
|
|
str = bstr_cut(str, next);
|
|
|
|
}
|
|
|
|
// Interpret parameters. Explicitly ignore unknown ones.
|
|
|
|
if (bstr_equals0(name, "file")) {
|
|
|
|
p.filename = bstrto0(tl, val);
|
|
|
|
} else if (bstr_equals0(name, "start")) {
|
|
|
|
if (!parse_time(val, &p.offset))
|
|
|
|
goto error;
|
|
|
|
p.offset_set = true;
|
|
|
|
} else if (bstr_equals0(name, "length")) {
|
|
|
|
if (!parse_time(val, &p.length))
|
|
|
|
goto error;
|
|
|
|
} else if (bstr_equals0(name, "timestamps")) {
|
|
|
|
if (bstr_equals0(val, "chapters"))
|
|
|
|
p.chapter_ts = true;
|
|
|
|
}
|
|
|
|
nparam++;
|
|
|
|
if (!bstr_eatstart0(&str, ","))
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
if (!p.filename)
|
|
|
|
goto error;
|
|
|
|
MP_TARRAY_APPEND(tl, tl->parts, tl->num_parts, p);
|
|
|
|
}
|
|
|
|
if (!tl->num_parts)
|
|
|
|
goto error;
|
|
|
|
return tl;
|
|
|
|
error:
|
|
|
|
talloc_free(tl);
|
|
|
|
return NULL;
|
|
|
|
}
|
|
|
|
|
2015-02-17 22:48:47 +00:00
|
|
|
static struct demuxer *open_source(struct timeline *tl, char *filename)
|
2015-02-17 22:48:39 +00:00
|
|
|
{
|
2015-02-17 22:48:47 +00:00
|
|
|
for (int n = 0; n < tl->num_sources; n++) {
|
|
|
|
struct demuxer *d = tl->sources[n];
|
2015-02-17 22:48:39 +00:00
|
|
|
if (strcmp(d->stream->url, filename) == 0)
|
|
|
|
return d;
|
|
|
|
}
|
2015-02-20 21:08:02 +00:00
|
|
|
struct demuxer *d = demux_open_url(filename, NULL, tl->cancel, tl->global);
|
2015-02-20 20:56:55 +00:00
|
|
|
if (d) {
|
2015-02-17 22:48:47 +00:00
|
|
|
MP_TARRAY_APPEND(tl, tl->sources, tl->num_sources, d);
|
2015-02-20 20:56:55 +00:00
|
|
|
} else {
|
|
|
|
MP_ERR(tl, "EDL: Could not open source file '%s'.\n", filename);
|
|
|
|
}
|
2015-02-17 22:48:39 +00:00
|
|
|
return d;
|
|
|
|
}
|
|
|
|
|
|
|
|
static double demuxer_chapter_time(struct demuxer *demuxer, int n)
|
|
|
|
{
|
|
|
|
if (n < 0 || n >= demuxer->num_chapters)
|
|
|
|
return -1;
|
|
|
|
return demuxer->chapters[n].pts;
|
|
|
|
}
|
|
|
|
|
|
|
|
// Append all chapters from src to the chapters array.
|
|
|
|
// Ignore chapters outside of the given time range.
|
|
|
|
static void copy_chapters(struct demux_chapter **chapters, int *num_chapters,
|
|
|
|
struct demuxer *src, double start, double len,
|
|
|
|
double dest_offset)
|
|
|
|
{
|
|
|
|
for (int n = 0; n < src->num_chapters; n++) {
|
|
|
|
double time = demuxer_chapter_time(src, n);
|
|
|
|
if (time >= start && time <= start + len) {
|
|
|
|
struct demux_chapter ch = {
|
|
|
|
.pts = dest_offset + time - start,
|
2015-08-12 09:10:45 +00:00
|
|
|
.metadata = mp_tags_dup(*chapters, src->chapters[n].metadata),
|
2015-02-17 22:48:39 +00:00
|
|
|
};
|
|
|
|
MP_TARRAY_APPEND(NULL, *chapters, *num_chapters, ch);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
// return length of the source in seconds, or -1 if unknown
|
|
|
|
static double source_get_length(struct demuxer *demuxer)
|
|
|
|
{
|
|
|
|
double time;
|
|
|
|
// <= 0 means DEMUXER_CTRL_NOTIMPL or DEMUXER_CTRL_DONTKNOW
|
|
|
|
if (demux_control(demuxer, DEMUXER_CTRL_GET_TIME_LENGTH, &time) <= 0)
|
|
|
|
time = -1;
|
|
|
|
return time;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void resolve_timestamps(struct tl_part *part, struct demuxer *demuxer)
|
|
|
|
{
|
|
|
|
if (part->chapter_ts) {
|
|
|
|
double start = demuxer_chapter_time(demuxer, part->offset);
|
|
|
|
double length = part->length;
|
|
|
|
double end = length;
|
|
|
|
if (end >= 0)
|
|
|
|
end = demuxer_chapter_time(demuxer, part->offset + part->length);
|
|
|
|
if (end >= 0 && start >= 0)
|
|
|
|
length = end - start;
|
|
|
|
part->offset = start;
|
|
|
|
part->length = length;
|
|
|
|
}
|
|
|
|
if (!part->offset_set)
|
|
|
|
part->offset = demuxer->start_time;
|
|
|
|
}
|
|
|
|
|
2015-02-17 22:48:47 +00:00
|
|
|
static void build_timeline(struct timeline *tl, struct tl_parts *parts)
|
2015-02-17 22:48:39 +00:00
|
|
|
{
|
2015-02-17 22:48:47 +00:00
|
|
|
tl->parts = talloc_array_ptrtype(tl, tl->parts, parts->num_parts + 1);
|
2015-02-17 22:48:39 +00:00
|
|
|
double starttime = 0;
|
|
|
|
for (int n = 0; n < parts->num_parts; n++) {
|
|
|
|
struct tl_part *part = &parts->parts[n];
|
2015-02-17 22:48:47 +00:00
|
|
|
struct demuxer *source = open_source(tl, part->filename);
|
2015-02-17 22:48:39 +00:00
|
|
|
if (!source)
|
|
|
|
goto error;
|
|
|
|
|
|
|
|
resolve_timestamps(part, source);
|
|
|
|
|
2016-05-23 13:23:27 +00:00
|
|
|
double end_time = source_get_length(source);
|
|
|
|
if (end_time >= 0)
|
|
|
|
end_time += source->start_time;
|
2015-02-17 22:48:39 +00:00
|
|
|
|
|
|
|
// Unknown length => use rest of the file. If duration is unknown, make
|
|
|
|
// something up.
|
2016-05-23 13:23:27 +00:00
|
|
|
if (part->length < 0) {
|
|
|
|
if (end_time < 0) {
|
|
|
|
MP_WARN(tl, "EDL: source file '%s' has unknown duration.\n",
|
|
|
|
part->filename);
|
|
|
|
end_time = 1;
|
|
|
|
}
|
|
|
|
part->length = end_time - part->offset;
|
|
|
|
} else if (end_time >= 0) {
|
|
|
|
double end_part = part->offset + part->length;
|
|
|
|
if (end_part > end_time) {
|
2015-02-17 22:48:47 +00:00
|
|
|
MP_WARN(tl, "EDL: entry %d uses %f "
|
|
|
|
"seconds, but file has only %f seconds.\n",
|
2016-05-23 13:23:27 +00:00
|
|
|
n, end_part, end_time);
|
2015-02-17 22:48:39 +00:00
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
// Add a chapter between each file.
|
|
|
|
struct demux_chapter ch = {
|
|
|
|
.pts = starttime,
|
2015-08-12 09:10:45 +00:00
|
|
|
.metadata = talloc_zero(tl, struct mp_tags),
|
2015-02-17 22:48:39 +00:00
|
|
|
};
|
2015-08-12 09:10:45 +00:00
|
|
|
mp_tags_set_str(ch.metadata, "title", part->filename);
|
2015-02-17 22:48:47 +00:00
|
|
|
MP_TARRAY_APPEND(tl, tl->chapters, tl->num_chapters, ch);
|
2015-02-17 22:48:39 +00:00
|
|
|
|
|
|
|
// Also copy the source file's chapters for the relevant parts
|
2015-02-17 22:48:47 +00:00
|
|
|
copy_chapters(&tl->chapters, &tl->num_chapters, source, part->offset,
|
2015-02-17 22:48:39 +00:00
|
|
|
part->length, starttime);
|
|
|
|
|
2015-02-17 22:48:47 +00:00
|
|
|
tl->parts[n] = (struct timeline_part) {
|
2015-02-17 22:48:39 +00:00
|
|
|
.start = starttime,
|
|
|
|
.source_start = part->offset,
|
|
|
|
.source = source,
|
|
|
|
};
|
|
|
|
|
|
|
|
starttime += part->length;
|
|
|
|
}
|
2015-02-17 22:48:47 +00:00
|
|
|
tl->parts[parts->num_parts] = (struct timeline_part) {.start = starttime};
|
|
|
|
tl->num_parts = parts->num_parts;
|
|
|
|
tl->track_layout = tl->parts[0].source;
|
2015-02-17 22:48:39 +00:00
|
|
|
return;
|
|
|
|
|
|
|
|
error:
|
2015-02-17 22:48:47 +00:00
|
|
|
tl->num_parts = 0;
|
|
|
|
tl->num_chapters = 0;
|
2015-02-17 22:48:39 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
// For security, don't allow relative or absolute paths, only plain filenames.
|
|
|
|
// Also, make these filenames relative to the edl source file.
|
|
|
|
static void fix_filenames(struct tl_parts *parts, char *source_path)
|
|
|
|
{
|
|
|
|
struct bstr dirname = mp_dirname(source_path);
|
|
|
|
for (int n = 0; n < parts->num_parts; n++) {
|
|
|
|
struct tl_part *part = &parts->parts[n];
|
|
|
|
char *filename = mp_basename(part->filename); // plain filename only
|
2015-05-09 13:26:47 +00:00
|
|
|
part->filename = mp_path_join_bstr(parts, dirname, bstr0(filename));
|
2015-02-17 22:48:39 +00:00
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2015-02-17 22:48:47 +00:00
|
|
|
static void build_mpv_edl_timeline(struct timeline *tl)
|
2015-02-17 22:48:39 +00:00
|
|
|
{
|
2015-02-17 22:49:38 +00:00
|
|
|
struct priv *p = tl->demuxer->priv;
|
|
|
|
|
|
|
|
struct tl_parts *parts = parse_edl(p->data);
|
2015-02-17 22:48:39 +00:00
|
|
|
if (!parts) {
|
2015-02-17 22:48:47 +00:00
|
|
|
MP_ERR(tl, "Error in EDL.\n");
|
2015-02-17 22:48:39 +00:00
|
|
|
return;
|
|
|
|
}
|
2015-02-17 22:48:47 +00:00
|
|
|
MP_TARRAY_APPEND(tl, tl->sources, tl->num_sources, tl->demuxer);
|
2015-02-17 22:48:39 +00:00
|
|
|
// Source is .edl and not edl:// => don't allow arbitrary paths
|
2015-02-17 22:48:47 +00:00
|
|
|
if (tl->demuxer->stream->uncached_type != STREAMTYPE_EDL)
|
|
|
|
fix_filenames(parts, tl->demuxer->filename);
|
|
|
|
build_timeline(tl, parts);
|
2015-02-17 22:48:39 +00:00
|
|
|
talloc_free(parts);
|
|
|
|
}
|
|
|
|
|
2013-07-12 19:58:11 +00:00
|
|
|
static int try_open_file(struct demuxer *demuxer, enum demux_check check)
|
EDL: add support for new EDL file format
The timeline code previously added to support Matroska ordered
chapters allows constructing a playback timeline from segments picked
from multiple source files. Add support for a new EDL format to make
this machinery available for use with file formats other than Matroska
and in a manner easier to use than creating files with ordered
chapters.
Unlike the old -edl option which specifies an additional file with
edits to apply to the video file given as the main argument, the new
EDL format is used by giving only the EDL file as the file to play;
that file then contains the filename(s) to use as source files where
actual video segments come from. Filename paths in the EDL file are
ignored. Currently the source files are only searched for in the
directory of the EDL file; support for a search path option will
likely be added in the future.
Format of the EDL files
The first line in the file must be "mplayer EDL file, version 2".
The rest of the lines belong to one of these classes:
1) lines specifying source files
2) empty lines
3) lines specifying timeline segments.
Lines beginning with '<' specify source files. These lines first
contain an identifier used to refer to the source file later, then the
filename separated by whitespace. The identifier must start with a
letter. Filenames that start or end with whitespace or contain
newlines are not supported.
On other lines '#' characters delimit comments. Lines that contain
only whitespace after comments have been removed are ignored.
Timeline segments must appear in the file in chronological order. Each
segment has the following information associated with it:
- duration
- output start time
- output end time (= output start time + duration)
- source id (specifies the file the content of the segment comes from)
- source start time (timestamp in the source file)
- source end time (= source start time + duration)
The output timestamps must form a continuous timeline from 0 to the
end of the last segment, such that each new segment starts from the
time the previous one ends at. Source files and times may change
arbitrarily between segments.
The general format for lines specifying timeline segments is
[output time info] source_id [source time info]
source_id must be an identifier defined on a '<' line. Both the time
info parts consists of zero or more of the following elements:
1) timestamp
2) -timestamp
3) +duration
4) *
5) -*
, where "timestamp" and "duration" are decimal numbers (computations
are done with nanosecond precision). Whitespace around "+" and "-" is
optional. 1) and 2) specify start and end time of the segment on
output or source side. 3) specifies duration; the semantics are the
same whether this appears on output or source side. 4) and 5) are
ignored on the output side (they're always implicitly assumed). On the
source side 4) specifies that the segment starts where the previous
segment _using this source_ ended; if there was no previous segment
time 0 is used. 5) specifies that the segment ends where the next
segment using this source starts.
Redundant information may be omitted. It will be filled in using the
following rules:
- output start for first segment is 0
- two of [output start, output end, duration] imply third
- two of [source start, source end, duration] imply third
- output start = output end of previous segment
- output end = output start of next segment
- if "*", source start = source end of earlier segment
- if "-*", source end = source start of a later segment
As a special rule, a last zero-duration segment without a source
specification may appear. This will produce no corresponding segment
in the resulting timeline, but can be used as syntax to specify the
end time of the timeline (with effect equal to adding -time on the
previous line).
Examples:
----- begin -----
mplayer EDL file, version 2
< id1 filename
0 id1 123
100 id1 456
200 id1 789
300
----- end -----
All segments come from the source file "filename". First segment
(output time 0-100) comes from time 123-223, second 456-556, third
789-889.
----- begin -----
mplayer EDL file, version 2
< f filename
f 60-120
f 600-660
f 30- 90
----- end -----
Play first seconds 60-120 from the file, then 600-660, then 30-90.
----- begin -----
mplayer EDL file, version 2
< id1 filename1
< id2 filename2
+10 id1 *
+10 id2 *
+10 id1 *
+10 id2 *
+10 id1 *
+10 id2 *
----- end -----
This plays time 0-10 from filename1, then 0-10 from filename1, then
10-20 from filename1, then 10-20 from filename2, then 20-30 from
filename1, then 20-30 from filename2.
----- begin -----
mplayer EDL file, version 2
< t1 filename1
< t2 filename2
t1 * +2 # segment 1
+2 t2 100 # segment 2
t1 * # segment 3
t2 *-* # segment 4
t1 3 -* # segment 5
+0.111111 t2 102.5 # segment 6
7.37 t1 5 +1 # segment 7
----- end -----
This rather pathological example illustrates the rules for filling in
implied data. All the values can be determined by recursively applying
the rules given above, and the full end result is this:
+2 0-2 t1 0-2 # segment 1
+2 2-4 t2 100-102 # segment 2
+0.758889 4-4.758889 t1 2-2.758889 # segment 3
+0.5 4.4758889-5.258889 t2 102-102.5 # segment 4
+2 5.258889-7.258889 t1 3-5 # segment 5
+0.111111 7.258889-7.37 t2 102.5-102.611111 # segment 6
+1 7.37-8.37 t1 5-6 # segment 7
2011-02-14 11:05:35 +00:00
|
|
|
{
|
2015-02-17 22:49:38 +00:00
|
|
|
struct priv *p = talloc_zero(demuxer, struct priv);
|
|
|
|
demuxer->priv = p;
|
2015-02-18 20:10:43 +00:00
|
|
|
demuxer->fully_read = true;
|
2015-02-17 22:49:38 +00:00
|
|
|
|
EDL: add support for new EDL file format
The timeline code previously added to support Matroska ordered
chapters allows constructing a playback timeline from segments picked
from multiple source files. Add support for a new EDL format to make
this machinery available for use with file formats other than Matroska
and in a manner easier to use than creating files with ordered
chapters.
Unlike the old -edl option which specifies an additional file with
edits to apply to the video file given as the main argument, the new
EDL format is used by giving only the EDL file as the file to play;
that file then contains the filename(s) to use as source files where
actual video segments come from. Filename paths in the EDL file are
ignored. Currently the source files are only searched for in the
directory of the EDL file; support for a search path option will
likely be added in the future.
Format of the EDL files
The first line in the file must be "mplayer EDL file, version 2".
The rest of the lines belong to one of these classes:
1) lines specifying source files
2) empty lines
3) lines specifying timeline segments.
Lines beginning with '<' specify source files. These lines first
contain an identifier used to refer to the source file later, then the
filename separated by whitespace. The identifier must start with a
letter. Filenames that start or end with whitespace or contain
newlines are not supported.
On other lines '#' characters delimit comments. Lines that contain
only whitespace after comments have been removed are ignored.
Timeline segments must appear in the file in chronological order. Each
segment has the following information associated with it:
- duration
- output start time
- output end time (= output start time + duration)
- source id (specifies the file the content of the segment comes from)
- source start time (timestamp in the source file)
- source end time (= source start time + duration)
The output timestamps must form a continuous timeline from 0 to the
end of the last segment, such that each new segment starts from the
time the previous one ends at. Source files and times may change
arbitrarily between segments.
The general format for lines specifying timeline segments is
[output time info] source_id [source time info]
source_id must be an identifier defined on a '<' line. Both the time
info parts consists of zero or more of the following elements:
1) timestamp
2) -timestamp
3) +duration
4) *
5) -*
, where "timestamp" and "duration" are decimal numbers (computations
are done with nanosecond precision). Whitespace around "+" and "-" is
optional. 1) and 2) specify start and end time of the segment on
output or source side. 3) specifies duration; the semantics are the
same whether this appears on output or source side. 4) and 5) are
ignored on the output side (they're always implicitly assumed). On the
source side 4) specifies that the segment starts where the previous
segment _using this source_ ended; if there was no previous segment
time 0 is used. 5) specifies that the segment ends where the next
segment using this source starts.
Redundant information may be omitted. It will be filled in using the
following rules:
- output start for first segment is 0
- two of [output start, output end, duration] imply third
- two of [source start, source end, duration] imply third
- output start = output end of previous segment
- output end = output start of next segment
- if "*", source start = source end of earlier segment
- if "-*", source end = source start of a later segment
As a special rule, a last zero-duration segment without a source
specification may appear. This will produce no corresponding segment
in the resulting timeline, but can be used as syntax to specify the
end time of the timeline (with effect equal to adding -time on the
previous line).
Examples:
----- begin -----
mplayer EDL file, version 2
< id1 filename
0 id1 123
100 id1 456
200 id1 789
300
----- end -----
All segments come from the source file "filename". First segment
(output time 0-100) comes from time 123-223, second 456-556, third
789-889.
----- begin -----
mplayer EDL file, version 2
< f filename
f 60-120
f 600-660
f 30- 90
----- end -----
Play first seconds 60-120 from the file, then 600-660, then 30-90.
----- begin -----
mplayer EDL file, version 2
< id1 filename1
< id2 filename2
+10 id1 *
+10 id2 *
+10 id1 *
+10 id2 *
+10 id1 *
+10 id2 *
----- end -----
This plays time 0-10 from filename1, then 0-10 from filename1, then
10-20 from filename1, then 10-20 from filename2, then 20-30 from
filename1, then 20-30 from filename2.
----- begin -----
mplayer EDL file, version 2
< t1 filename1
< t2 filename2
t1 * +2 # segment 1
+2 t2 100 # segment 2
t1 * # segment 3
t2 *-* # segment 4
t1 3 -* # segment 5
+0.111111 t2 102.5 # segment 6
7.37 t1 5 +1 # segment 7
----- end -----
This rather pathological example illustrates the rules for filling in
implied data. All the values can be determined by recursively applying
the rules given above, and the full end result is this:
+2 0-2 t1 0-2 # segment 1
+2 2-4 t2 100-102 # segment 2
+0.758889 4-4.758889 t1 2-2.758889 # segment 3
+0.5 4.4758889-5.258889 t2 102-102.5 # segment 4
+2 5.258889-7.258889 t1 3-5 # segment 5
+0.111111 7.258889-7.37 t2 102.5-102.611111 # segment 6
+1 7.37-8.37 t1 5-6 # segment 7
2011-02-14 11:05:35 +00:00
|
|
|
struct stream *s = demuxer->stream;
|
2013-11-19 21:26:35 +00:00
|
|
|
if (s->uncached_type == STREAMTYPE_EDL) {
|
2015-02-17 22:49:38 +00:00
|
|
|
p->data = bstr0(s->path);
|
2013-11-19 21:26:35 +00:00
|
|
|
return 0;
|
|
|
|
}
|
2013-07-12 19:58:11 +00:00
|
|
|
if (check >= DEMUX_CHECK_UNSAFE) {
|
2013-11-21 14:59:00 +00:00
|
|
|
if (!bstr_equals0(stream_peek(s, strlen(HEADER)), HEADER))
|
2013-07-12 19:58:11 +00:00
|
|
|
return -1;
|
|
|
|
}
|
2015-02-17 22:49:38 +00:00
|
|
|
p->data = stream_read_complete(s, demuxer, 1000000);
|
|
|
|
if (p->data.start == NULL)
|
2013-07-11 18:08:12 +00:00
|
|
|
return -1;
|
2015-02-17 22:49:38 +00:00
|
|
|
bstr_eatstart0(&p->data, HEADER);
|
2013-07-11 18:08:12 +00:00
|
|
|
return 0;
|
EDL: add support for new EDL file format
The timeline code previously added to support Matroska ordered
chapters allows constructing a playback timeline from segments picked
from multiple source files. Add support for a new EDL format to make
this machinery available for use with file formats other than Matroska
and in a manner easier to use than creating files with ordered
chapters.
Unlike the old -edl option which specifies an additional file with
edits to apply to the video file given as the main argument, the new
EDL format is used by giving only the EDL file as the file to play;
that file then contains the filename(s) to use as source files where
actual video segments come from. Filename paths in the EDL file are
ignored. Currently the source files are only searched for in the
directory of the EDL file; support for a search path option will
likely be added in the future.
Format of the EDL files
The first line in the file must be "mplayer EDL file, version 2".
The rest of the lines belong to one of these classes:
1) lines specifying source files
2) empty lines
3) lines specifying timeline segments.
Lines beginning with '<' specify source files. These lines first
contain an identifier used to refer to the source file later, then the
filename separated by whitespace. The identifier must start with a
letter. Filenames that start or end with whitespace or contain
newlines are not supported.
On other lines '#' characters delimit comments. Lines that contain
only whitespace after comments have been removed are ignored.
Timeline segments must appear in the file in chronological order. Each
segment has the following information associated with it:
- duration
- output start time
- output end time (= output start time + duration)
- source id (specifies the file the content of the segment comes from)
- source start time (timestamp in the source file)
- source end time (= source start time + duration)
The output timestamps must form a continuous timeline from 0 to the
end of the last segment, such that each new segment starts from the
time the previous one ends at. Source files and times may change
arbitrarily between segments.
The general format for lines specifying timeline segments is
[output time info] source_id [source time info]
source_id must be an identifier defined on a '<' line. Both the time
info parts consists of zero or more of the following elements:
1) timestamp
2) -timestamp
3) +duration
4) *
5) -*
, where "timestamp" and "duration" are decimal numbers (computations
are done with nanosecond precision). Whitespace around "+" and "-" is
optional. 1) and 2) specify start and end time of the segment on
output or source side. 3) specifies duration; the semantics are the
same whether this appears on output or source side. 4) and 5) are
ignored on the output side (they're always implicitly assumed). On the
source side 4) specifies that the segment starts where the previous
segment _using this source_ ended; if there was no previous segment
time 0 is used. 5) specifies that the segment ends where the next
segment using this source starts.
Redundant information may be omitted. It will be filled in using the
following rules:
- output start for first segment is 0
- two of [output start, output end, duration] imply third
- two of [source start, source end, duration] imply third
- output start = output end of previous segment
- output end = output start of next segment
- if "*", source start = source end of earlier segment
- if "-*", source end = source start of a later segment
As a special rule, a last zero-duration segment without a source
specification may appear. This will produce no corresponding segment
in the resulting timeline, but can be used as syntax to specify the
end time of the timeline (with effect equal to adding -time on the
previous line).
Examples:
----- begin -----
mplayer EDL file, version 2
< id1 filename
0 id1 123
100 id1 456
200 id1 789
300
----- end -----
All segments come from the source file "filename". First segment
(output time 0-100) comes from time 123-223, second 456-556, third
789-889.
----- begin -----
mplayer EDL file, version 2
< f filename
f 60-120
f 600-660
f 30- 90
----- end -----
Play first seconds 60-120 from the file, then 600-660, then 30-90.
----- begin -----
mplayer EDL file, version 2
< id1 filename1
< id2 filename2
+10 id1 *
+10 id2 *
+10 id1 *
+10 id2 *
+10 id1 *
+10 id2 *
----- end -----
This plays time 0-10 from filename1, then 0-10 from filename1, then
10-20 from filename1, then 10-20 from filename2, then 20-30 from
filename1, then 20-30 from filename2.
----- begin -----
mplayer EDL file, version 2
< t1 filename1
< t2 filename2
t1 * +2 # segment 1
+2 t2 100 # segment 2
t1 * # segment 3
t2 *-* # segment 4
t1 3 -* # segment 5
+0.111111 t2 102.5 # segment 6
7.37 t1 5 +1 # segment 7
----- end -----
This rather pathological example illustrates the rules for filling in
implied data. All the values can be determined by recursively applying
the rules given above, and the full end result is this:
+2 0-2 t1 0-2 # segment 1
+2 2-4 t2 100-102 # segment 2
+0.758889 4-4.758889 t1 2-2.758889 # segment 3
+0.5 4.4758889-5.258889 t2 102-102.5 # segment 4
+2 5.258889-7.258889 t1 3-5 # segment 5
+0.111111 7.258889-7.37 t2 102.5-102.611111 # segment 6
+1 7.37-8.37 t1 5-6 # segment 7
2011-02-14 11:05:35 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
const struct demuxer_desc demuxer_desc_edl = {
|
|
|
|
.name = "edl",
|
2013-11-19 21:23:41 +00:00
|
|
|
.desc = "Edit decision list",
|
2013-07-12 19:58:11 +00:00
|
|
|
.open = try_open_file,
|
2015-02-17 22:48:47 +00:00
|
|
|
.load_timeline = build_mpv_edl_timeline,
|
EDL: add support for new EDL file format
The timeline code previously added to support Matroska ordered
chapters allows constructing a playback timeline from segments picked
from multiple source files. Add support for a new EDL format to make
this machinery available for use with file formats other than Matroska
and in a manner easier to use than creating files with ordered
chapters.
Unlike the old -edl option which specifies an additional file with
edits to apply to the video file given as the main argument, the new
EDL format is used by giving only the EDL file as the file to play;
that file then contains the filename(s) to use as source files where
actual video segments come from. Filename paths in the EDL file are
ignored. Currently the source files are only searched for in the
directory of the EDL file; support for a search path option will
likely be added in the future.
Format of the EDL files
The first line in the file must be "mplayer EDL file, version 2".
The rest of the lines belong to one of these classes:
1) lines specifying source files
2) empty lines
3) lines specifying timeline segments.
Lines beginning with '<' specify source files. These lines first
contain an identifier used to refer to the source file later, then the
filename separated by whitespace. The identifier must start with a
letter. Filenames that start or end with whitespace or contain
newlines are not supported.
On other lines '#' characters delimit comments. Lines that contain
only whitespace after comments have been removed are ignored.
Timeline segments must appear in the file in chronological order. Each
segment has the following information associated with it:
- duration
- output start time
- output end time (= output start time + duration)
- source id (specifies the file the content of the segment comes from)
- source start time (timestamp in the source file)
- source end time (= source start time + duration)
The output timestamps must form a continuous timeline from 0 to the
end of the last segment, such that each new segment starts from the
time the previous one ends at. Source files and times may change
arbitrarily between segments.
The general format for lines specifying timeline segments is
[output time info] source_id [source time info]
source_id must be an identifier defined on a '<' line. Both the time
info parts consists of zero or more of the following elements:
1) timestamp
2) -timestamp
3) +duration
4) *
5) -*
, where "timestamp" and "duration" are decimal numbers (computations
are done with nanosecond precision). Whitespace around "+" and "-" is
optional. 1) and 2) specify start and end time of the segment on
output or source side. 3) specifies duration; the semantics are the
same whether this appears on output or source side. 4) and 5) are
ignored on the output side (they're always implicitly assumed). On the
source side 4) specifies that the segment starts where the previous
segment _using this source_ ended; if there was no previous segment
time 0 is used. 5) specifies that the segment ends where the next
segment using this source starts.
Redundant information may be omitted. It will be filled in using the
following rules:
- output start for first segment is 0
- two of [output start, output end, duration] imply third
- two of [source start, source end, duration] imply third
- output start = output end of previous segment
- output end = output start of next segment
- if "*", source start = source end of earlier segment
- if "-*", source end = source start of a later segment
As a special rule, a last zero-duration segment without a source
specification may appear. This will produce no corresponding segment
in the resulting timeline, but can be used as syntax to specify the
end time of the timeline (with effect equal to adding -time on the
previous line).
Examples:
----- begin -----
mplayer EDL file, version 2
< id1 filename
0 id1 123
100 id1 456
200 id1 789
300
----- end -----
All segments come from the source file "filename". First segment
(output time 0-100) comes from time 123-223, second 456-556, third
789-889.
----- begin -----
mplayer EDL file, version 2
< f filename
f 60-120
f 600-660
f 30- 90
----- end -----
Play first seconds 60-120 from the file, then 600-660, then 30-90.
----- begin -----
mplayer EDL file, version 2
< id1 filename1
< id2 filename2
+10 id1 *
+10 id2 *
+10 id1 *
+10 id2 *
+10 id1 *
+10 id2 *
----- end -----
This plays time 0-10 from filename1, then 0-10 from filename1, then
10-20 from filename1, then 10-20 from filename2, then 20-30 from
filename1, then 20-30 from filename2.
----- begin -----
mplayer EDL file, version 2
< t1 filename1
< t2 filename2
t1 * +2 # segment 1
+2 t2 100 # segment 2
t1 * # segment 3
t2 *-* # segment 4
t1 3 -* # segment 5
+0.111111 t2 102.5 # segment 6
7.37 t1 5 +1 # segment 7
----- end -----
This rather pathological example illustrates the rules for filling in
implied data. All the values can be determined by recursively applying
the rules given above, and the full end result is this:
+2 0-2 t1 0-2 # segment 1
+2 2-4 t2 100-102 # segment 2
+0.758889 4-4.758889 t1 2-2.758889 # segment 3
+0.5 4.4758889-5.258889 t2 102-102.5 # segment 4
+2 5.258889-7.258889 t1 3-5 # segment 5
+0.111111 7.258889-7.37 t2 102.5-102.611111 # segment 6
+1 7.37-8.37 t1 5-6 # segment 7
2011-02-14 11:05:35 +00:00
|
|
|
};
|